Related
hello I have an i9305t was on official 4.1.1 upgraded to official 4.3 with odin .3.09 and it gets stuck on boot on the blue white pulsating Samsung logo. tried 4.1.2 fails tried 4.1.1 phone works fine, just cant upgrade to any new firmware at all. help would be great
vnholden said:
hello I have an i9305t was on official 4.1.1 upgraded to official 4.3 with odin .3.09 and it gets stuck on boot on the blue white pulsating Samsung logo. tried 4.1.2 fails tried 4.1.1 phone works fine, just cant upgrade to any new firmware at all. help would be great
Click to expand...
Click to collapse
To prevent you from being stuck onto the Samsung boot logo, you should wipe cache and wipe data from recovery after flashing the firmware. To do so follow these instructions.
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
After entering recovery, you should see the options, to wipe cache and wipe data. wipe them. Hope you did a backup as you will use most of you files.
LucasBass said:
To prevent you from being stuck onto the Samsung boot logo, you should wipe cache and wipe data from recovery after flashing the firmware. To do so follow these instructions.
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
After entering recovery, you should see the options, to wipe cache and wipe data. wipe them. Hope you did a backup as you will use most of you files.
Click to expand...
Click to collapse
thank for the reply I should of put that ive tried all that. doesn't work, just stays on that logo only way past it is to install 4.1.1.
Does your phone's IMEI (baseband) show up on 4.1.1 ?
dashing_9508 said:
Does your phone's IMEI (baseband) show up on 4.1.1 ?
Click to expand...
Click to collapse
yeah but only if I use perseus kernel. with out it I have no coverage aswell.
so has anyone got any ideas. much appreciated
vnholden said:
so has anyone got any ideas. much appreciated
Click to expand...
Click to collapse
I think you could try installing Stock 4.3 with Heimdall.
http://forum.xda-developers.com/showthread.php?t=1127419
viktorak said:
I think you could try installing Stock 4.3 with Heimdall.
http://forum.xda-developers.com/showthread.php?t=1127419
Click to expand...
Click to collapse
daaam was hoping that would of worked but no unfortunately. ready to throw this thing at the wall.
still having problems updating to any new firmware be it official or custom roms. nothing works, I tried cm11 all went well till the loading screen just cant get past that point. but 4.1.1 works without any problems.
I think you could try to use Triangle away,to reset flash counter and then use KIES recovery to reflash 4.1.1 stock.Then try to update to 4.1.2 or 4.3.
viktorak said:
I think you could try to use Triangle away,to reset flash counter and then use KIES recovery to reflash 4.1.1 stock.Then try to update to 4.1.2 or 4.3.
Click to expand...
Click to collapse
cheers mate ill give it a whirl but I don't think it will work. ill give you a big thanks anyway.
viktorak said:
I think you could try to use Triangle away,to reset flash counter and then use KIES recovery to reflash 4.1.1 stock.Then try to update to 4.1.2 or 4.3.
Click to expand...
Click to collapse
ok I tried what you recommended, but as I thought stuck on Samsung writing blue led light stays on. only one that worked was 4.1.1. I wonder if a modified binary or kernel is causing it. its how I got the phone so I don't no its history.
Well, let's try to flash true Mobile Odin pro a stock Samsung firmware.You need to be root.See if we're lucky.
Here you have the XDA Thread:http://forum.xda-developers.com/showthread.php?t=1347899
viktorak said:
Well, let's try to flash true Mobile Odin pro a stock Samsung firmware.You need to be root.See if we're lucky.
Here you have the XDA Thread:http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
thanks for trying to help I really appreciate it. as for mobile odin it will have to wait no funds on my card at moment. but I did manage to install a custom rom its 4.3 but I have no network coverage. in about settings unknown baseband.
this is the rom im using.
http://forum.xda-developers.com/gal...-amcha-rom-v5-00-simply-customizable-t2619670
perseus kernel stops the phone from not booting. that gives me my baseband. atleast ive got some where with it just need network to work now.
p.s sorry if im not making much sense but its beer drinking time for me. lol
You have to check the IMEI of your phone.If you have lost your IMEI see this thread:http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
SM-T815
I have try to root with odin and cf autoroot and all work fine, then I have installed twrp for 815 5.0.2 version. After the installation the tablet restart on recovery mode, I try to make a backup and twrp works good but at the restart the tablet is in bootloop.
I can’t shut down. I can only access download mode and not recovery mode.
I have flashed the original firmware with odin and odin says PASS but at the restart it is bootloop again. I try to flash twrp again and odin says PASS, after this I can read on the start screen (the only one I can see) “recovery is not nandroid enforced”. I tried different firmware but nothing work.
Someone can help me?
Grazie 1000
Boot into recovery POWER +HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Wipe data. If that doesn't work then factory reset.
Thanks for the answer. I try more than 100 time but it don't go in recovery mode. I tried to complete discharging and then recharging with the buttons pushed. Nothing. Every time it's stuck in the start screen and i can't shut down.
ashyx said:
Boot into recovery POWER +HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Wipe data. If that doesn't work then factory reset.
Click to expand...
Click to collapse
sorry to bother you,
do you think it is possible to force recovery mode from odin? i can't do it with buttons
ctlx said:
sorry to bother you,
do you think it is possible to force recovery mode from odin? i can't do it with buttons
Click to expand...
Click to collapse
Not possible.
Try booting to Download mode then hit CANCEL then immediately hold HOME + VOL DOWN + POWER make sure you hold the buttons in that order and you must be quick.
[email protected] said:
I don't have much idea but I had read somewhere that u can flash ROMs through Odin too.
P.S. I m not sure about it.
Sent from my GT-S7390 using XDA Forums
Click to expand...
Click to collapse
Please read the OP again.
ashyx said:
Not possible.
Try booting to Download mode then hit CANCEL then immediately hold HOME + VOL DOWN + POWER make sure you hold the buttons in that order and you must be quick.
Click to expand...
Click to collapse
no way. i flash the stock firmware with kies3, all work good but bootloop again. impossible to boot in recovery, i try more then 100 times your way but only download mode
ctlx said:
no way. i flash the stock firmware with kies3, all work good but bootloop again. impossible to boot in recovery, i try more then 100 times your way but only download mode
Click to expand...
Click to collapse
please don't let me go to samsung asking for help
ctlx said:
please don't let me go to samsung asking for help
Click to expand...
Click to collapse
Still not able to boot to recovery? I will build you a boot image that will boot you directly to recovery.
ashyx said:
Still not able to boot to recovery? I will build you a boot image that will boot you directly to recovery.
Click to expand...
Click to collapse
it will be great!
yes i'm still on bootloop
same trouble here lase help
Hi All!
I would like to share with you how I fix the preblem after root of my T815.
After long night and reading whole net I found the solution.
As you I also wants to root my device because of availible only one user. I wanted to have multiusers. So folowing the instructions downloading all software and after root I got bootloop. Trying everithing but no success. I wasn't able to flash even some of the stock ROMs.
Solution:
I found in Sammobile what is my current ROM and downloaded it. Then flash - no any problems. Went smooth. Then I root the device... and now I have rooted device with multiuser support.
It seems that after fresh flash everithing is OK. It seems that after you playing with your device for a while you enabled some options thats make your device to loop after root.
I wish you Happy New Year!
Nikog
Whoops sorry, I completely forgot to come back to you about this!
Glad you got it sorted.
Nikog said:
Hi All!
I would like to share with you how I fix the preblem after root of my T815.
After long night and reading whole net I found the solution.
As you I also wants to root my device because of availible only one user. I wanted to have multiusers. So folowing the instructions downloading all software and after root I got bootloop. Trying everithing but now success. I wasn't able to flash even some of the stock ROMs.
Solution:
I found in Sammobile what is my current ROM and downloaded it. Then flash - no any problems. Went smooth. Then I root the device... and now I have rooted device with multiuser support.
It seems that after fresh flash everithing is OK. It seems that after you playing with your device for a while you enabled some options thats make your device to loop after root.
I wish you Happy New Year!
Nikog
Click to expand...
Click to collapse
thanks, I will try and let you know if it works for me.
at this time I have tried to flash different stock rooms but not one works, even if odin says it is all ok
ashyx said:
Whoops sorry, I completely forgot to come back to you about this!
Glad you got it sorted.
Click to expand...
Click to collapse
i don't find a solution.
if you can help me it will be great
ctlx said:
i don't find a solution.
if you can help me it will be great
Click to expand...
Click to collapse
Still not able to boot to recovery?
ashyx said:
Still not able to boot to recovery?
Click to expand...
Click to collapse
yes still on the same condition, only download mode
ctlx said:
yes still on the same condition, only download mode
Click to expand...
Click to collapse
OK, hopefully I can come back to you later with a boot.img to boot directly to recovery.
ashyx said:
OK, hopefully I can come back to you later with a boot.img to boot directly to recovery.
Click to expand...
Click to collapse
thanks a lot
ctlx said:
thanks a lot
Click to expand...
Click to collapse
It was a late night for me last night and working late again tonight.
If I get the opportunity after work I'll get something up, but if not it may be tomorrow on my day off.
Hi all,
I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.
Downloads firmware to device
Reboots
Shows Android dude with "Installing update"
Stops half way through
Shows Android dude with "Erasing"
Disappears after few seconds
Reboots
Nothing is changed. Same as before the whole process...
liangle01 said:
Hi all,
I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.
Downloads firmware to device
Reboots
Shows Android dude with "Installing update"
Stops half way through
Shows Android dude with "Erasing"
Disappears after few seconds
Reboots
Nothing is changed. Same as before the whole process...
Click to expand...
Click to collapse
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
MrMike2182 said:
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
Click to expand...
Click to collapse
I am having a similar problem odin runs and passes, but the phone goes to the Samsung screen and has recovery is not seandroid enforcing on the top of the screen. Any ideas?
timsmooth said:
I am having a similar problem odin runs and passes, but the phone goes to the Samsung screen and has recovery is not seandroid enforcing on the top of the screen. Any ideas?
Click to expand...
Click to collapse
That's because you are trying to to root it I'm guessing? You either flashed the wrong kernel, or you actually did not turn on oem unlock in developer options. You'll need to restore it back to stock and then turn on oem unlock then flash a kernel/recovery and then retry what you're trying to do.
MrMike2182 said:
That's because you are trying to to root it I'm guessing? You either flashed the wrong kernel, or you actually did not turn on oem unlock in developer options. You'll need to restore it back to stock and then turn on oem unlock then flash a kernel/recovery and then retry what you're trying to do.
Click to expand...
Click to collapse
Fair enough. Where can I get the stock Kernel so I can get back into the OS? I keep finding bad ones with unmatching MD5s.
timsmooth said:
Fair enough. Where can I get the stock Kernel so I can get back into the OS? I keep finding bad ones with unmatching MD5s.
Click to expand...
Click to collapse
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
same thing
The same old firmware after rebooting.....Any ideas
liangle01 said:
The same old firmware after rebooting.....Any ideas
Click to expand...
Click to collapse
What do you mean the same old firmware? That firmware is just stock firmware so you can at least get back up and running to try rooting it again.
You asked for the stock firmware...
"I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.'
So I gave it to you.
MrMike2182 said:
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
Click to expand...
Click to collapse
LOL its been a long time since I have flashed or rooted, but I didn't know you can extract from an MD5, but I will do that and give it a shot. Ill let you know thx for your help.
MrMike2182 said:
Make sure you uncheck auto reboot in Odin! Do not allow it to reboot the phone! Flash the stock firmware again and after it says success unplug the phone and immediately press and hold the volume down button and power button at the same time and when the screen comes back on select factory reset and after its finished the phone will reboot on it's own and you're done it should work correctly.
Click to expand...
Click to collapse
My phone is not rooted (i like to keep it like that) all what I want is to change the CSC ( both of them are for the same country) but Odin keep failing. Any ideas plz
timsmooth said:
LOL its been a long time since I have flashed or rooted, but I didn't know you can extract from an MD5, but I will do that and give it a shot. Ill let you know thx for your help.
Click to expand...
Click to collapse
LOL it's better to extract the .tar from the md5 so it doesn't have to be verified which is what's causing it to not work for you.
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
liangle01 said:
My phone is not rooted (i like to keep it like that) all what I want is to change the CSC ( both of them are for the same country) but Odin keep failing. Any ideas plz
Click to expand...
Click to collapse
If Odin fails there's nothing I can do about it sorry.
MrMike2182 said:
Download one of these for your phone. .
http://www.sammobile.com/firmwares/database/SM-N920P/
Make sure you uncheck auto reboot in Odin and as soon as it's done and says success disconnect the phone and immediately press and hold the volume down button and the power button at the same time and when the screen comes back up you HAVE to select factory reset wipe if you don't you'll be stuck again just let the little android dude install the update and then the phone will reboot and you'll be ok.
Unzip the md5 you get from the sammobile site and flash only the .tar
Click to expand...
Click to collapse
Dag nabit I lost ALL my data. Jesus H xrst. Lucky I use cloud back up for my pictures. At least I have those. All my music is gone though. Dude thanks a million though at least I am up and running again. The process was simple enough but I would have never figured it out. Ive got a long day ahead of me now. I have to re configure my phone. Anyway, I owe you a beer.
Flashing phones never used to be this brutal. What happened?
MrMike2182 said:
What do you mean the same old firmware? That firmware is just stock firmware so you can at least get back up and running to try rooting it again.
You asked for the stock firmware...
"I'm having an odd issue. No matter whether I used Odin or Smart Switch I can simply not flash a stock firmware. Regardless of the method, the following always happens.'
So I gave it to you.
Click to expand...
Click to collapse
the new firmware (6.0.1) has a different CSC from the original (6.0.1). but when i flash it with odin nothing happened:1- my Apps,my photos....all is there.2- when i check the CSC it's the same old one..i mean it have to change isn't ???? . it's just like i have restarted my phone normal !!!!!
MrMike2182 said:
LOL it's better to extract the .tar from the md5 so it doesn't have to be verified which is what's causing it to not work for you.
---------- Post added at 08:42 AM ---------- Previous post was at 08:40 AM ----------
If Odin fails there's nothing I can do about it sorry.
Click to expand...
Click to collapse
thanks for responding anyway. if you find anything please report me......
again thank you ✌✌✌
timsmooth said:
Dag nabit I lost ALL my data. Jesus H xrst. Lucky I use cloud back up for my pictures. At least I have those. All my music is gone though. Dude thanks a million though at least I am up and running again. The process was simple enough but I would have never figured it out. Ive got a long day ahead of me now. I have to re configure my phone. Anyway, I owe you a beer.
Flashing phones never used to be this brutal. What happened?
Click to expand...
Click to collapse
Shoot sorry I should have mentioned that it was going to erase everything (I found out the hard way to lol) But even if I had known that I wouldn't have been able to get them back anyway once you can't get in to change the settings to file transfer.. I'm glad I back everything up to my laptop! The phone companies are locking the phones down tightly "for our own interests they say" which is BS and totally goes against what Android open source is supposed to be about!!!
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
liangle01 said:
the new firmware (6.0.1) has a different CSC from the original (6.0.1). but when i flash it with odin nothing happened:1- my Apps,my photos....all is there.2- when i check the CSC it's the same old one..i mean it have to change isn't ???? . it's just like i have restarted my phone normal !!!!!
Click to expand...
Click to collapse
What's wrong with your phone booting normal? I don't understand what you're trying to do.. What's the CSC have to do with anything?
Full AT&T official FIRMWARE G935AUCS4BRA1 to restore //G935A\\ with January security
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
norbarb said:
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
Click to expand...
Click to collapse
As always, thanks so much.
New BIT 5 version is released ... link needed
aamszia said:
New BIT 5 version is released ... link needed
Click to expand...
Click to collapse
There is no full firmware with Bootloader 5, there not even any of G935 was OTA updated to Bootloader 5 as of yet. . There are only combination files witch you should not flash unless you need to fix your phone. So i'm sorry but you stuck on it.
Can't seem to get it to download... through computer or phone
Edit: I got it.... thanks
norbarb said:
G935AUCS4BRA1
Latest ODIN 3.12.10
Enjoy !!!!
Click to expand...
Click to collapse
Thank you ! Quick question, I currently have 935A with May security firmware fully stock, can I just flash this directly to get latest update ? (I believe this will wipe my phone too)
bestjsg said:
Thank you ! Quick question, I currently have 935A with May security firmware fully stock, can I just flash this directly to get latest update ? (I believe this will wipe my phone too)
Click to expand...
Click to collapse
Yes. You can flash directly and this will wipe data in your phone.
Sent from my SM-N950U using XDA Premium HD app
Stock ATT firmware
Thanks tons, now stuck in a boot loop cannot even turn off. I have tried various ways to get the U version and if I get this back to stock, think I will sell it and buy a U version. Hate carrier proprietary garbage.:good:
nomad247 said:
Thanks tons, now stuck in a boot loop cannot even turn off. I have tried various ways to get the U version and if I get this back to stock, think I will sell it and buy a U version. Hate carrier proprietary garbage.:good:
Click to expand...
Click to collapse
You need to get to recovery and clean cache
Sent from my SM-N950U using XDA Premium HD app
Bootloop
You need to get to recovery and clean cache
Have a ask a really dumb question, How do I get to "clear cache" in recovery? And of course, googled it, just have to charge some. I did achieve root earlier, just trying to get the "U" mod installed. Thanks tons
edit: Did the steps so now I have a blinking message saying recovery booting...
nomad247 said:
You need to get to recovery and clean cache
Have a ask a really dumb question, How do I get to "clear cache" in recovery? And of course, googled it, just have to charge some. I did achieve root earlier, just trying to get the "U" mod installed. Thanks tons
Click to expand...
Click to collapse
Press and hold power, home and volume button up anthill Samsung splash screen. Then let go and for recovery menu to popup.
Sent from my SM-N950U using XDA Premium HD app
Boot loop and maybe bricked
I still cannot get to the cache to clear it.
Here what I have right now.
hold power button, screens goes black then have the first screen of start, S7 edge, it goes off and comes back on
i can get into down load mode, tried reloading the stock firmware but get a write error, model miss-match
if arrow down goes to start up boot loop, if arrow up does into downlaod
power off (does not really shut off)
Vol up + home + power, gets the recovery booting loop
Odin sees the phone, but any writes all seem to fail. Sometimes have to use Odin Prince sometimes 3.12.7
In 12/.6 tried to load the S7 edge qual com image file from rooting, and that said fail in red.
Tried to flash back stock but like I said earlier, says product code miss match
I had tried to use odin to do that update and that probably is what screwed the pooch.
Any ideas?
eror 404 not found broken link very nice...
error 404
can you upload the file again ?
@norbarb you need to take all your links down if you're not going to reupload them.
Boot loop and recovery boot loop
You need to get to recovery and clean cache
ok so, is there a way to fix this with boot lop and recovery in boot loop?
Odin comsy sees the phone but ADB does not... Hoping to get this fixed and working again. Had to buy a phone so using a SM-G930V. At least no more ATT for me....
Anyone???
Here you go guys enjoy.
https://drive.google.com/drive/folders/1aal95ObUmnxdNu33bac0GXosOSRLXD0i
Q: why are the files doble the size of the other updates??
bsharp8 said:
Here you go guys enjoy.
Click to expand...
Click to collapse
Disregard - sorry, didn't see the new link.
Edit: Thanks for the updated files! I'm not sure why it failed the first time, but it worked the second time.
Hi all,
My MIL has an s20 FE 5G. it was apparently downloading an update last month when it just froze. It goes into a bootloop, and i've tried factory reset, flashing new firmware via ODIN, and anything else i can think of(i'm no tech genius, but i can follow instructions pretty well). It will only ever bootloop a couple times, then go blank until i restart it in either bootloader, recovery or download mode. She has another phone, but is this one now just a brick, or is there something else i can do?
attached are some pictures that show basically everything i can see.
thanks
you say it froze when downloading but that shouldn't be an issue, it's once it's started flashing that update you don't want it freezing.
you didn't say what happens when you tried flashing with Odin. obviously it failed but that could be because you were flashing the wrong fw or fw that's too old now. it should say something in the Odin onscreen log for why it failed.
3mel said:
you say it froze when downloading but that shouldn't be an issue, it's once it's started flashing that update you don't want it freezing.
you didn't say what happens when you tried flashing with Odin. obviously it failed but that could be because you were flashing the wrong fw or fw that's too old now. it should say something in the Odin onscreen log for why it failed.
Click to expand...
Click to collapse
Hi,
I'll send a picture later when I get a chance, but it's apparently flashing just fine..I get no error messages from Odin. It states success, but then the phone just continues with the bootloop when I restart
allencass1974 said:
Hi,
I'll send a picture later when I get a chance, but it's apparently flashing just fine..I get no error messages from Odin. It states success, but then the phone just continues with the bootloop when I restart
Click to expand...
Click to collapse
that's got me that one. all I can think is try rebooting to recovery after the flash and factory reset / wipe
any update on this ?
3mel said:
any update on this ?
Click to expand...
Click to collapse
Nothing. Sorry, I've just been busy, but I tried wiping the cache, and factory reset. Same result sadly
3mel said:
that's got me that one. all I can think is try rebooting to recovery after the flash and factory reset / wipe
Click to expand...
Click to collapse
Nothing. Sorry, I've just been busy, but I tried wiping the cache, and factory reset. Same result sadly
3mel said:
any update on this ?
Click to expand...
Click to collapse
Hi again,
just tried again. no luck.
you don't need to flash userdata just BL, AP, CP and CSC. if it's still looping it could be a hardware failure of some kind, time to use that warranty.
3mel said:
you don't need to flash userdata just BL, AP, CP and CSC. if it's still looping it could be a hardware failure of some kind, time to use that warranty.
Click to expand...
Click to collapse
Hello again
tried again, no luck. might be time to give up. i had read a few places that using the actual samsung cord could make a difference. is this true, even though its flashing just fine?
allencass1974 said:
Hello again
tried again, no luck. might be time to give up. i had read a few places that using the actual samsung cord could make a difference. is this true, even though its flashing just fine?
Click to expand...
Click to collapse
if it's saying PASS there's nothing more that needs to happen normally.
take it to get looked at, that's why we have warranties.
3mel said:
if it's saying PASS there's nothing more that needs to happen normally.
take it to get looked at, that's why we have warranties.
Click to expand...
Click to collapse
Will do that. Thanks for the help!
Will update when I have more news