Hi everyone,
I have z1 , I rooted it 3 mounts ago. I flash twrp 3.0.2 , doom kernel and 7.1.2 rom. But now my phone dont open, I only open recovery ,wipe everything but cant flash anything ( kernel,rom, twrp new versiyon). My charge level down very quickly and cant use mtp usb connection. I open twrp recovery and select storage micro SD.
Plz help , what should i do? I have to open my z1, I havent got another phone.
Thnx 4 replies.
Mtp should work in twrp. Try fix partitions then flash, or try stock from xperifirm
Related
i have soft bricked mobile some problems at Android system recovery
can go downloads mode
btw is possible instal via Odin ClockworkMod Recovery ?
and btw for instaling new firmware we must have ClockworkMod Recovery ?
because i see some ppls talking about lagfix if dont want have error at system recover ..
Yes its possible depend on ur phone. @ CM9 threads there will be information about it
for sure its possible
thats the way i got clockwork mod on my device just go into download mode take the right clockworkmod package into odin and fiire it up afterwards it will lead into the cmw and u are able to get ure device back to life again
i instal CF-Root-XX_OXA_JVK-v2.7-CWM3RFS
is Clockwordmod recover v3.0.05 bu dont have laggfix
but any firmware insta got same error
E:failed to mount/sdcard (File exists)
E:Copy_dbdata_media: Cant mount /sd card
your storage not prepared yet, please use UI menu for format and reboot actions.
Hey
U can unbrick it from the link given below..
odin mode
Hi guys i have soft-bricked my android called QUADRO SQ-45E83C!
I read on the internet that i have to reflash rom or backup phone with CWM recovery.
I can't find rom for my phone anywhere on the net so i have to do it by CWM.
But i can't install CWM because my phone can't go into ODIN/DOWNLOAD mode.
Now,is there any method to do it by command prompt (go to ODIN/DOWNLOAD mode) on PC or i have to do it manually (on the phone)
PLEASE HELP!
Thnx !
I have soft bricked ZTE Grand ERA V9800
i the red notification light just stay on until the battery dies and it can go in to stock recovey
i have wiped the device but still same problem.
Can anyone help?
hey guys
i got a note 1 N7000
the 4.1.2 rom was on the device
i decided to instal a kitkat cyanogenmod 11 |nightly| on the device
according to this guide :
http://www.androible.net/root-galax...m-recovery-android-4-1-2-jelly-bean-firmware/
i rooted the device which i doubt if i did this right
then i copied the rom file in the internal storage
i got to recovery , got a backup , wipe & reset factory
then i installed the rom but it didn't install correctly and i got the failure message in recovery
now i unpluged the device and turn it on , it shows a yellow warning and doesn't go any further
i could use some help to install a 4.4 version of android
thanks ♥
May he you wiped system that's why it's not booting.. If you are able to get into recovery then transfer raw r4 into sd card. Then boot into recovery. Flash raw kernel first. Then reboot into recovery. Flash the kitkat rom.
yes , i can access to recovery
can you get me a link of that rom ?
which kitkat rom do you prefer to install on this phone ?
i flashed a R5 kernel but the recovery mode has changed to Team Win Recovery Project 2.6.3.0
and i can't mount the device or flash a rom
how do i get back to previous recovery ?
can i instal a recovery with odin ?
P.S : i solved this one
Finaly ! i installed the 4.4.2 rom
but the WIFI doesn't work
any idea ?
Oracle_Eldorado said:
Finaly ! i installed the 4.4.2 rom
but the WIFI doesn't work
any idea ?
Click to expand...
Click to collapse
Doesn't work? Means? Does it turn on or not? If yes and then can't see any networks, then go to advanced wifi settings and set the region.
hello i tryed to flash XDABBEB's VS98024A v1.1.1 rom , i came from 10B rom , so i needed to flash xdabbeb_vs98024a_bootstack.zip
as he wrote on his instaction of the instalstion : http://forum.xda-developers.com/showthread.php?t=2715408
i had TWRP 2.7.0.0 and i didnt do nano backup becuase i had somthing before it , i flashed the xdabbeb_vs98024a_bootstack.zip after that
i tryed to instal the stock rom of the 24Av1.1.1 and i notice everything was deleted in my sd card and i when i got to the restore back it was empty to!
now my phone can only get into recovery mode , and its cant get into download mode beacuse i install xdabbeb_vs98024a_bootstack.zip , how can i install now a stock rom on my device only from the recovery?? beacuse theres nothing on the sd card and the phone is stuck on bootload , Please any help ,
Guilad said:
hello i tryed to flash XDABBEB's VS98024A v1.1.1 rom , i came from 10B rom , so i needed to flash xdabbeb_vs98024a_bootstack.zip
as he wrote on his instaction of the instalstion : http://forum.xda-developers.com/showthread.php?t=2715408
i had TWRP 2.7.0.0 and i didnt do nano backup becuase i had somthing before it , i flashed the xdabbeb_vs98024a_bootstack.zip after that
i tryed to instal the stock rom of the 24Av1.1.1 and i notice everything was deleted in my sd card and i when i got to the restore back it was empty to!
now my phone can only get into recovery mode , and its cant get into download mode beacuse i install xdabbeb_vs98024a_bootstack.zip , how can i install now a stock rom on my device only from the recovery?? beacuse theres nothing on the sd card and the phone is stuck on bootload , Please any help ,
Click to expand...
Click to collapse
I believe in TWRP there is an option to allow you to adb push files to the phone.
This may work - http://teamw.in/ADBSideload
Thanks
I succued to figure it out .. I did like you said.. I pushed a Rom to the phone with the adb and its works thanks for the answer anyway
Hello guys!
I'm new to these things, but I hate that stock Xperia SP rom, so I thought...why not install a custom rom?
So, I did. I did everything what Bagyusz wrote here: http://forum.xda-developers.com/showthread.php?t=2735841
I was using PhilZ's recovery "don't know what"
I tapped on "Clean to Install a New ROM" and then I installed the latest SlimKAT by Bagyusz.
After I installed the rom, everything booted and worked fine, except Camera, wallpaper etc... (I don't know why)
But what I'm worried the most about is the USB connect. When I connect my phone with my PC, I can't do anything, the pc detects the phone, but I can't do anything on it.
So I need your help guys, what should I do?
btw: I don't have any SD card, so I also can't download anything to my phone.
tl;dr: I can't connect my phone to my pc correctly, and can't download anything because I don't have SD card (4.4.4<3)
The rom what I installed(the latest one): http://forum.xda-developers.com/showthread.php?t=2735841
a little more info
Oh, and I have that recovery thing too, which I don't know what to do with.:victory:
Problem solved
Okay, problem solved, downloaded the right tft from flashtool's database and flashed it with flashtool.
Slimkat works only with an sd card because it mounts the internal sd to the /data partition which means you have more storage for apps and games..
Hi all,
I tried to update from 4.1.2 to 5.1.1. & therefore I rooted my Galaxy and installed PhilZ Touch 4.
The installation of "pa_n7000-5.1-20150628" failed; something with emms Error; the file is on the root of the external SD card
So, I wanted to go back and use/instal my old Kitkat again. BUT I cannot not find it
And when I quit PhilZ Touch 4 ("Power of") the phone restarts in recovery mode with PhilZ Touch 4.
PhilZ Touch 4 runs great, but I do not know how to reinstall Kitkat or another Lollipop (f.e. pa_n7000-5.1-20151004.zip)
Odin is running, but does´t find the handset; no connection to the PC
Does anyone has a quick tip?
and/or
a manual for Odin (Odin3 v3.04)
and/or
a manual for PhilZ Touch 4 (CWM Base Version 6.0.3.1)
Thanks for all answers & pls excuse that a knewbie asks 4 help
OoooKEY
Problem is solved:
1st: I found the "mount" choice and so I could load the new ROM to the internal SD. (pa_n7000-5.1-20151004)
But before I deleted and cleared everything and all
2nd: I could forget ODIN. I had no chance to use it because I still do not know what I had to write in PIT, Bootloader etc
But the 5.1.1. version works
right now, I am trying to restore my backup. Smartswitch does´t work and does not recognizes my handset.
A TIP for Prower Users
Maybe somebody could write a kind of manual for dummies.... what is a root, boot, Pit, Kernel ....