Related
Super new here, I tried searching for my problem but I may just be blind. Thanks in advance for taking the time to help out.
I've got an 06' BMW with a witson android head unit.
The issue I'm having is Bluetooth music audio quality. Oddly enough Bluetooth calling isn't a problem. The upper range of sound is distorting. Don't know if this makes a difference or not, it's connecting to an iphone *hides under table. If I listen to the radio or to a cd (like it's 1997 or something) I don't hear the issue.
I've gone into the factory settings, and adjusted the BT volume up and down and found no change. I've changed all of the volume options, and found no change. I've tried changing the amplifier settings as well and have found no change.
MCU version MCTB-KYD-V2.77
Android version 4.4.4_27082015
Kernel version 3.0.36+
[email protected] #481
Build number rk3066-eng4.4.4
Cpu ARM cortexA-9 @1.6ghz(x2)
Thanks again for looking
Blackychan79 said:
Super new here, I tried searching for my problem but I may just be blind. Thanks in advance for taking the time to help out.
I've got an 06' BMW with a witson android head unit.
The issue I'm having is Bluetooth music audio quality. Oddly enough Bluetooth calling isn't a problem. The upper range of sound is distorting. Don't know if this makes a difference or not, it's connecting to an iphone *hides under table. If I listen to the radio or to a cd (like it's 1997 or something) I don't hear the issue.
I've gone into the factory settings, and adjusted the BT volume up and down and found no change. I've changed all of the volume options, and found no change. I've tried changing the amplifier settings as well and have found no change.
MCU version MCTB-KYD-V2.77
Android version 4.4.4_27082015
Kernel version 3.0.36+
[email protected] #481
Build number rk3066-eng4.4.4
Cpu ARM cortexA-9 @1.6ghz(x2)
Thanks again for looking
Click to expand...
Click to collapse
Have you tried factory settings, and turning down BT master volume. Mine was set well above the others, which could cause issues when in higher volume ranges.
Yes, in fact I was super excited when I searched and found the factory settings code, and that the bt adjustment was in there. It was set to +18 I've since set it to 0 and saw no improvement.
I guess my question is this
Clearly, a setting isn't going to fix this, should I just install a new Bluetooth app, or is the Bluetooth app essential to the operating system and I should just install a new operating system??
HI
I have erisin 2046 and my bluetooth music is scratching hard.. quality is very bad
set the master volume down already in factorysettings (126) but nothing changed.
Sounds like a firmware update is required... maybe to android 5.1? If only people answered more often about doing them... (I have no idea how)
I have two units (MTCB KLD, MTCD KGL) and an old clarion HU with bluetooth.
This problem exists all three units. It's not a firmware problem, problably MCU related issue.
I was digging many forums about this, but I cannot find solution.
I have a MTCD unit which is functioning well but the BT streaming quality is quiet bad.
It's quiet easy to do an A and B comparison with our android units so it will be obvious but if you didn't know, you'd think it's ok.
I just think bluetooth streaming quality is generally bad if you don't use APTX
probably there is a problem with smartphone. When I using android one, there is no distorting in upper range. However, when I use iPhone SE, it's hard to hear distorting sound and quality is really bad.
I have the same problem. Very bad sounding, upper range is distorted. I've tried 3rd party Bluetooth apps, but it doesn't recognize the unit as having Bluetooth. Probably cause the Bluetooth chip is in the MCU, and is not actually part of the android software. That's my guess.
Does anyone know if a Bluetooth dongle to the USB will work? I have a spare one laying around.
Sent from my iPhone using Tapatalk
davidgotmilk said:
I have the same problem. Very bad sounding, upper range is distorted. I've tried 3rd party Bluetooth apps, but it doesn't recognize the unit as having Bluetooth. Probably cause the Bluetooth chip is in the MCU, and is not actually part of the android software. That's my guess.
Does anyone know if a Bluetooth dongle to the USB will work? I have a spare one laying around.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
The bluetooth module connected to the MCU.
The MCU provide the Bluetooth audio stream to the Android OS.
The Bluetooth app can control the BT module through the MCU.
So there isn't direct link between the android OS and the bluetooth module.
Sorry my bad english..
Balazs
Babss said:
The bluetooth module connected to the MCU.
The MCU provide the Bluetooth audio stream to the Android OS.
The Bluetooth app can control the BT module through the MCU.
So there isn't direct link between the android OS and the bluetooth module.
Sorry my bad english..
Balazs
Click to expand...
Click to collapse
Yeah that's what I was trying to say, maybe we can switch out the Bluetooth module?
davidgotmilk said:
I have the same problem. Very bad sounding, upper range is distorted. I've tried 3rd party Bluetooth apps, but it doesn't recognize the unit as having Bluetooth. Probably cause the Bluetooth chip is in the MCU, and is not actually part of the android software. That's my guess.
Does anyone know if a Bluetooth dongle to the USB will work? I have a spare one laying around.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Did you solve this by using a Bluetooth dongle? did it work ?
Updates?
SaqibRyu said:
Did you solve this by using a Bluetooth dongle? did it work ?
Click to expand...
Click to collapse
Any updates on this topic? Can we replace the BT module with a usb version?
I have the same problem with the bluetooth in my Android auto >.<. Very bad sound when i connect my mobile via bluetooth. Anyone found a solution?
Sorry for my bad english.
SaqibRyu said:
Did you solve this by using a Bluetooth dongle? did it work ?
Click to expand...
Click to collapse
I tried, didn't work. I used a usb bluetooth dongle from my pc. Works on the pc, not on the unit. Maybe you will have better luck. Mine still sounds like garbage.
Here the same Problem! Very, very Bad.
Anyone had any luck with this topic? very annoying.
i have this problem on my MTCE XRC unit.
same problem on AE0273B
sev said:
i have this problem on my MTCE XRC unit.
Click to expand...
Click to collapse
Audio streaming over Bluetooth App from my iPhone (say from Pandora) is noticeably worse quality than using an app on the HU (say, Pandora App on HU). Do not have this problem streaming to other HUs (like the one built into the Prius) or my previous GTA Kit.
I have noticed this is a widespread issue and I've decided to raise it. This needs to be fixed and Huawei should stop ignoring this problem. The Bluetooth is basically crippled and locked to SBC. I've tested multiple devices and all exhibited this behaviour. Why is it ignored? Are all the reviews fake?
https://www.youtube.com/watch?v=x-sifkojUqw
i read that Bluetooth options in pixel dont stick too. so it must be some wierd oreo crap. you cant even change gpu renderer. it always defaults back. best way to handle that is to chat with huawei support and check it out.
I don't use Bluetooth very much but it appears to be the same for the regular Mate 10 as well. I'm currently using my virtual desktop so I could not test if after changing the setting in developer mode does it stick after a reboot?
this confusion is due to a lack of follow-through. all oreo devices have this "issue". it's not an issue at all. if a connected bluetooth device supports these codecs, the best one will automatically be selected. it is not limited to huawei devices. this is normal and does not affect functionality. you should take down this thread so no one throws any fits for no reason.
Well mine switches to aptX automatically when I connect to aptX-compatible devices. However you are correct that I cannot manually change it in developer settings.
Further testing has shown this issue not to be an issue, I've managed to successfully connect to an APTX device and the codec was selected. Video removed. Apologies for this confusion.
perrin21 said:
Further testing has shown this issue not to be an issue, I've managed to successfully connect to an APTX device and the codec was selected. Video removed. Apologies for this confusion.
Click to expand...
Click to collapse
Doesn't matter, it will still randomly switch to loudspeaker and the quality will still be terrible.
tr1cky1 said:
Doesn't matter, it will still randomly switch to loudspeaker and the quality will still be terrible.
Click to expand...
Click to collapse
I don't have any issues regarding Bluetooth for now, haven't really tested aptx I think, but it worked fine otherwise. And never switched to loudspeaker or so
Sent from my HUAWEI BLA-L29 using XDA Labs
perrin21 said:
I have noticed this is a widespread issue and I've decided to raise it. This needs to be fixed and Huawei should stop ignoring this problem. The Bluetooth is basically crippled and locked to SBC. I've tested multiple devices and all exhibited this behaviour. Why is it ignored? Are all the reviews fake?
https://www.youtube.com/watch?v=x-sifkojUqw
Click to expand...
Click to collapse
It's not crippled, it's buggy.
SBC and aptX have high noise floor and specially on SBC, it causes some deformations to the Audio.
AAC is totally broken.
DeeZZ_NuuZZ said:
I don't have any issues regarding Bluetooth for now, haven't really tested aptx I think, but it worked fine otherwise. And never switched to loudspeaker or so
Sent from my HUAWEI BLA-L29 using XDA Labs
Click to expand...
Click to collapse
Good for you, people here all have Bluetooth problems:
https://www.android-hilfe.de/forum/...oth-problem.853624-page-19.html#post-10970173
I have no issues with my Bluetooth headphones, the Sony WH-1000NX2
The highest quality of transmission is selected automatically, LDAC, that's 990 kbit/s
It's the best Bluetooth can do in the Audio section.
The Sony headphone App confirms the LDAC connection
i am trying my friend's MDR 1000x. i tried both SBC and LDAC. Now I can't go back to LDAC. Help please
Aac not working on p20 pro, works fine on the pixel 2
Bull****.
AAC No longer works on my head unit and my Bose QC35 Headphones.
It worked perfectly before 8.0.0.128 update.
Factory Reset does not work, nothing works. It refuses to use anything else than ****ty SBC.
tr1cky1 said:
Good for you, people here all have Bluetooth problems:
https://www.android-hilfe.de/forum/...oth-problem.853624-page-19.html#post-10970173
Click to expand...
Click to collapse
they are reporting issues with many devices on that forum. android has always had some issues with bluetooth. huawei is no exception. my samsung and sony devices were the best by far. i think it's because of improvements that they make to the android system.
Anyone on b142? Can you comment on if the Bluetooth audio quality is better?
Can anyone confirm if b142 solved sbc problem? I think aac is stilo broken, but sbc quality?
Kekkolekko94 said:
Can anyone confirm if b142 solved sbc problem? I think aac is stilo broken, but sbc quality?
Click to expand...
Click to collapse
Solved.
I don't have a clue what you guys talking about with all those 3 and 4 letter/digit combinations of names but i feel I've gotta share i use Bluetooth all day long for different kinds of profiles and i mean all day long, and to say this doesn't fail nearly as much as nougat did would mean i imply it does fail to a certain, however small, degree, which isn't even close to being the case, so... But i do notice the in band ringing settings don't stick just like they don't stick in my Oreo S5...
I've had Android phones since 2012 and the Huawei mate 10 pro is the only one with Bluetooth issues. Constantly dropping parts of songs when connected to my mazda 6. Infuriating to say the least. The most expensive phone I've ever had....
I have experienced Bluetooth backward compatibility problems with my note 8 on devices having early bluetooth versions. For instance I have a monster rocking roller speaker that worked flawlessly with the s7 and with my N8 I would have audio distortion and crackling.
With the delivery of Oreo there are a bunch of Bluetooth settings to play with in developer options (attached) and I was wondering if anyone has had success tweaking these settings to solve an issue like I have been having.
I never used any of the settings and no BT issues here (Speakers, car audio, smart watches, wireless headphones/earbuts).
Maybe your speaker has a problem...
jwrlaw said:
I have experienced Bluetooth backward compatibility problems with my note 8 on devices having early bluetooth versions. For instance I have a monster rocking roller speaker that worked flawlessly with the s7 and with my N8 I would have audio distortion and crackling.
With the delivery of Oreo there are a bunch of Bluetooth settings to play with in developer options (attached) and I was wondering if anyone has had success tweaking these settings to solve an issue like I have been having.
Click to expand...
Click to collapse
Have you tried messing with the sound-alive settings the phone uses? The drivers it uses suck! Ive noticed in some cars it was the issue, ive moved away from samsung drivers all together and use viper for a solution but being unrooted your stuck with using what you got
Team DevDigitel said:
Have you tried messing with the sound-alive settings the phone uses? The drivers it uses suck! Ive noticed in some cars it was the issue, ive moved away from samsung drivers all together and use viper for a solution but being unrooted your stuck with using what you got
Click to expand...
Click to collapse
I didn't but I changed the codec setting from acc to sbc and messed with the sample rates and I now don't have a worthless $200 speaker. This seemed to solve my previous problems.
I've been having a similar issue my stereo in my truck is supposed to launch my Bluetooth music players and allow me to control the music player from the stereo in the truck but it does not now since the update any idea on what settings I should use for what they were before the update?
I use the aptX codec on my Bluetooth headset. What's up??
This is a long shot.
I have a pair of Bluetooth 4.1 Minirig speakers that can be set in stereo mode. However when in stereo mode one channel experiences dropouts. Running in mono mode is fine.
The issue is with the Nokia 7+'s Bluetooth transmission as when using other Bluetooth enabled devices to power the speakers the issue does not occur.
Anyone else had this issue when connecting stereo speakers or headphones and know of a solution?
I have checked: System > Developer Options > Bluetooth Audio Codecs and tried changing these setting but the changes did not "stick" and problem remained.
Maybe there is an alternative setting somewhere that can be tweaked.
Thanks in advance.
doowoppa65 said:
I have checked: System > Developer Options > Bluetooth Audio Codecs and tried changing these setting but the changes did not "stick" and problem remained.
.
Click to expand...
Click to collapse
I'm also having this issue: whenever I'm connecting my N7+ onto the car's audio system via Bluetooth I have to change the codecs to the correct one every single time to make it properly work (have sound/audio at all). The settings also don't stick or are not being saved. Also looking for a solution for this, unless an update miraculously fixes it.
Same problem here when connected to my car by bluetooth. Occasionally there is a dropout. This does not happen when my friends connect with their phones (oneplus 5, samsung, allview. or my old lg g4).
Changing the bluetooth audio codecs does not work as it does not remain selected and it switches to default. This, as i understood, happens on android 8 and has been resolved in the Pie beta and should be ok in the final Pie release.
When I raised the issue with the superbly talented nokia tech support they either act surprised as if its an unique issue to you or send you a list of compatible bluetooth protocols. Are we expected to change our cars and speakers to make the phone work?
I had this issue after installing garmin connect. Theres a thread over in the garmin forums (forums.garmin.com/forum/into-sports/garmin-connect-mobile-application/garmin-connect-mobile-android/1375800-audio-streaming-issues) about it. Also on the nokia forums (community.phones.nokia.com/support/discussions/topics/7000022239/). Seems to affect some phones on 8.1
Anyway, I'm on Pie beta now and the problem has gone away.
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
So you have bluetooth connected to the watch and car at the same time?
If so, my guess would be a setting in the watch for the volume of music. Or in the phone, go to settings / bluetooth / advanced / dual audio. Select it and play with the settings to setup what to do when two bluetooth audio devices are connected
ninjatiger26 said:
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
Click to expand...
Click to collapse
Had the same problem with my cheap external bluetooth to FM adapter.
Turn on Developer Options and adjust the bluetooth profile while connected to your car audio.
Having Dolby Audio set to auto might also have an impact.
Thanks for the advice but no luck so far.
The settings under developers let me change when nothing is connected but they revert back to sbc soon as I leave the menu. And they are locked out when connected.
Also dual audio does nothing.
It only has the issue when the watch is connected.
As if its taking the bandwidth.
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Titokhan said:
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Click to expand...
Click to collapse
Apologies for the delay, has been a mad few days!
Sadly changing the AVRCP didnt help on all versions.
It seems there maybe a weird one however on the codec. It reverts to SBC which from a bit of muddled googling is all my receiver supports. from non iPhone devices. However, it takes AAC if its a iphone.
Seems odd to me however they would limit it. Like i said this is from googling so maybe incorrect.
the stranger part is however i paired up a Oneplus 6 and the watch all was fine on SBC codec. its just watch and the s10+ it has an issue.
Admit very lost on this one.
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Camerena said:
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Click to expand...
Click to collapse
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Outbreak444 said:
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Click to expand...
Click to collapse
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Camerena said:
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Click to expand...
Click to collapse
Why not Google it?maybe you will get a solution for this problem.
Same issue here on my s10+. When playing any audio in my car via BT i hear the distortion/hissing noise especially when the song has a higher treble frequency.
I have just about tried all fixes i could find on Google, and no luck.
When connecting to my ear buds (Jabra Elite 65t) it disappears and checked in developer mode that it supports to AAC for BT Codecs.
But when connecting to the car it reverts to SBC.
The issue clearly lies on Samsungs side, as my brother has a Huawei p30 Pro, also has bluetooth 5 and plays amazingly well in all aspects (Bass-Mids-Treble).
I know I'm posting this almost a year later, but i am desperately looking for a fix.
SN. I have recently updated my phone to Android 10, despite all the complaints to Samsung from many users... Sadly this issue has not beeing fixed on my side.
Does any of you still have the same issue?
I have the same issue with S9(android 10 ui2)
- no dou audio diable option
- bluetooth conected only to my earphones, with no car.
I’ve been a Samsung phone user since the S5 and this issue persists across all their phones since at least that one. The only real solution is to avoid the SBC codec or turn off your watch while listening to music. It will never be patched as it’s been going on for over 6 years. In the early days Galaxy phones only really used SBC so you couldn’t avoid it.
APT-X and AAC are your best options. Good luck finding those on a car system. You can easily find headphones that support them.