This is a long shot.
I have a pair of Bluetooth 4.1 Minirig speakers that can be set in stereo mode. However when in stereo mode one channel experiences dropouts. Running in mono mode is fine.
The issue is with the Nokia 7+'s Bluetooth transmission as when using other Bluetooth enabled devices to power the speakers the issue does not occur.
Anyone else had this issue when connecting stereo speakers or headphones and know of a solution?
I have checked: System > Developer Options > Bluetooth Audio Codecs and tried changing these setting but the changes did not "stick" and problem remained.
Maybe there is an alternative setting somewhere that can be tweaked.
Thanks in advance.
doowoppa65 said:
I have checked: System > Developer Options > Bluetooth Audio Codecs and tried changing these setting but the changes did not "stick" and problem remained.
.
Click to expand...
Click to collapse
I'm also having this issue: whenever I'm connecting my N7+ onto the car's audio system via Bluetooth I have to change the codecs to the correct one every single time to make it properly work (have sound/audio at all). The settings also don't stick or are not being saved. Also looking for a solution for this, unless an update miraculously fixes it.
Same problem here when connected to my car by bluetooth. Occasionally there is a dropout. This does not happen when my friends connect with their phones (oneplus 5, samsung, allview. or my old lg g4).
Changing the bluetooth audio codecs does not work as it does not remain selected and it switches to default. This, as i understood, happens on android 8 and has been resolved in the Pie beta and should be ok in the final Pie release.
When I raised the issue with the superbly talented nokia tech support they either act surprised as if its an unique issue to you or send you a list of compatible bluetooth protocols. Are we expected to change our cars and speakers to make the phone work?
I had this issue after installing garmin connect. Theres a thread over in the garmin forums (forums.garmin.com/forum/into-sports/garmin-connect-mobile-application/garmin-connect-mobile-android/1375800-audio-streaming-issues) about it. Also on the nokia forums (community.phones.nokia.com/support/discussions/topics/7000022239/). Seems to affect some phones on 8.1
Anyway, I'm on Pie beta now and the problem has gone away.
Related
I have 3 stereo bluetooth devices and 2 headset only devices.
The problem comes from auto re-connecting to the stereo devices.
The only way it seems to work at all is if I pair all the stereo devices first.
If I reset, then I usually have to click and hold on the device in BT Settings and select "set as wireless stereo" to get the stereo connection to kick in.
In my tests I have made sure only one device is on at a time.
It certainly is not as easy as it should be.
It seems to be worse after a Tilt reset.
So my questions are : Has anyone else seen this behavior and is there a fix or work-around for it?
If not, does anyone no how to make a direct link to the BT Settings Window so at least it would only be a couple clicks to fix it?
You need at least one of each device (headset and stereo headset) to see this problem.
I've seen this with my Wizard as well as the Tytn II, so I suspect it's a "feature" of the MS BT stack. I think it's somehow related to the "set as wireless stereo" feature -- apparently only one device at a time can have that setting, and MS turns the setting off if it can't connect to that device. Note that there's no such setting for handsfree, and connections on that profile work flawlessly between multiple devices.
Its a little better
What I found out is that if you pair all your stereo devices first and then all the non-stereo, things seem to work a bit better and Dutty's BT-Link plugin will reconnect the stereo part most of the time, so its only a click away and sometimes you don't need to turn the device to discover mode.
However, if anyone from MS reads this, there is no reason not to automatically connect into full stereo, IF the device is the only one in the list that can be found at any point in time. And if they wanted to be really cool, if not, then present the user with a list so he can click to choose.
Similar problem
Hi BSW11,
Im having a similar problem with the pairing of my carkit.
http://forum.xda-developers.com/showthread.php?p=1717330#post1717330
I believe it can be traced to the the MS BT stack not handling the automatic re-pairing correctly. I am surprised that not many other people have notice or complained in this forum about it.
Adam
No BT Wireless Stereo device will auto-connect to any WM device, you have to tell your phone to connect to it via the BT setting unless a 3rd party app has that function built in to it. This is a 'feature' of MS WM OS system.
Any BT 'headset' (ie mono earpiece) will auto connect if it has been selected for 'use as headset'
Hope this helps.
I recently flashed CyanogenMod 12.1 nightly on my droid turbo. I Have had a good user experience so far, although there is only one issue that is really effecting my decision of using this ROM as my daily driver. My phone has no audio during Bluetooth calling and the microphone is not working as well. I'm not sure if this is a known issue or if there is a fix available at this time. I would greatly appreciate any responses in this thread troubleshooting the issue, so we can all resume safe hands-free driving.
androiduser123456 said:
I recently flashed CyanogenMod 12.1 nightly on my droid turbo. I Have had a good user experience so far, although there is only one issue that is really effecting my decision of using this ROM as my daily driver. My phone has no audio during Bluetooth calling and the microphone is not working as well. I'm not sure if this is a known issue or if there is a fix available at this time. I would greatly appreciate any responses in this thread troubleshooting the issue, so we can all resume safe hands-free driving.
Click to expand...
Click to collapse
Do you happen to be using the 11/29 nightly? I haven't tried any other newer release yet, but I have been able to successfully connect via bluetooth to my car and stream audio. I've had no indication of it failing. The one thing that got me at first when connecting to my car and streaming was that bluetooth has it's own volume control (which I turned up to maximum on my phone). I'm not sure that would explain the microphone though (if it's even related to your issue).
calsurferpunk said:
Do you happen to be using the 11/29 nightly? I haven't tried any other newer release yet, but I have been able to successfully connect via bluetooth to my car and stream audio. I've had no indication of it failing. The one thing that got me at first when connecting to my car and streaming was that bluetooth has it's own volume control (which I turned up to maximum on my phone). I'm not sure that would explain the microphone though (if it's even related to your issue).
Click to expand...
Click to collapse
I'm sorry you're right Bluetooth music streaming is working fine just Bluetooth calling isn't I have tried it on 11/29 build to current the issue still persists
androiduser123456 said:
I'm sorry you're right Bluetooth music streaming is working fine just Bluetooth calling isn't I have tried it on 11/29 build to current the issue still persists
Click to expand...
Click to collapse
Depends on the bluetooth device you have. My Jawbone ICON earpiece works fine, and my Pioneer car stereo makes calls fine. Other people have had some issues. The dev says he needs a logcat for missing bluetooth configurations.
Skrilax_CZ said:
Also for the bluetooth sound not playing issues, I'll need a logcat for those, since it's possibly a missing configuration for some of them.
Click to expand...
Click to collapse
ChazzMatt said:
Depends on the bluetooth device you have. My ICON earpiece works fine, and my Pioneer car stereo makes calls fine. Other people have had some issue. The dev says he needs a logcat for missing bluetooth configurations.
Click to expand...
Click to collapse
Thank you ChazzMatt for the information I hope it a simply fix in an update soon although I just find it strange I have a Pioneer head unit and music works and on the phone is shows up as a head set and the head unit let's me browse my contacts and place calls all be it with out audio and microphone but it still shows the call timer.
androiduser123456 said:
Thank you ChazzMatt for the information I hope it a simply fix in an update soon although I just find it strange I have a Pioneer head unit and music works and on the phone is shows up as a head set and the head unit let's me browse my contacts and place calls all be it with out audio and microphone but it still shows the call timer.
Click to expand...
Click to collapse
And you've gone into the phone audio settings (when it's connected) to make sure your mic audio, etc wasn't turned down? Audio settings change when Bluetooth is connected...
I use Volume Control Plus and put a shortcut on the desktop so I have quick access to all the phone volume settings.
ChazzMatt said:
And you've gone into the phone audio settings (when it's connected) to make sure your mic audio, etc wasn't turned down? Audio settings change when Bluetooth is connected...
I use Volume Control Plus and put a shortcut on the desktop so I have quick access to all the phone volume settings.
Click to expand...
Click to collapse
yes I have made sure it is turned up on the head unit and the phone when connected and I have also tested when in a call selecting Bluetooth toggling back and forth from ear piece speaker but no change
This is why I ditched cm12.1 and went back to stock. My bt headset worked with music but no phone calls.
Sent from my XT1254 using Tapatalk
I have experienced Bluetooth backward compatibility problems with my note 8 on devices having early bluetooth versions. For instance I have a monster rocking roller speaker that worked flawlessly with the s7 and with my N8 I would have audio distortion and crackling.
With the delivery of Oreo there are a bunch of Bluetooth settings to play with in developer options (attached) and I was wondering if anyone has had success tweaking these settings to solve an issue like I have been having.
I never used any of the settings and no BT issues here (Speakers, car audio, smart watches, wireless headphones/earbuts).
Maybe your speaker has a problem...
jwrlaw said:
I have experienced Bluetooth backward compatibility problems with my note 8 on devices having early bluetooth versions. For instance I have a monster rocking roller speaker that worked flawlessly with the s7 and with my N8 I would have audio distortion and crackling.
With the delivery of Oreo there are a bunch of Bluetooth settings to play with in developer options (attached) and I was wondering if anyone has had success tweaking these settings to solve an issue like I have been having.
Click to expand...
Click to collapse
Have you tried messing with the sound-alive settings the phone uses? The drivers it uses suck! Ive noticed in some cars it was the issue, ive moved away from samsung drivers all together and use viper for a solution but being unrooted your stuck with using what you got
Team DevDigitel said:
Have you tried messing with the sound-alive settings the phone uses? The drivers it uses suck! Ive noticed in some cars it was the issue, ive moved away from samsung drivers all together and use viper for a solution but being unrooted your stuck with using what you got
Click to expand...
Click to collapse
I didn't but I changed the codec setting from acc to sbc and messed with the sample rates and I now don't have a worthless $200 speaker. This seemed to solve my previous problems.
I've been having a similar issue my stereo in my truck is supposed to launch my Bluetooth music players and allow me to control the music player from the stereo in the truck but it does not now since the update any idea on what settings I should use for what they were before the update?
I use the aptX codec on my Bluetooth headset. What's up??
I got the global version , its running global stable 9.6.7.0, this is probably the 4th update since got the phone and since new it never played media via Bluetooth, It does connect but no audio, no problem with call audio connects fine, just no media, anybody else have this problem? Any suggestions? Thanks
Mine is working perfectly in 9.6.7.0 and before. Playing audio (spotify) via bluetooth without any problem.
Enter settings--> bluetooth.
Enter your paired bluetooth device and ensure "audio multimedia" is checked.
Yes Media Audio is checked, I am starting to wonder if I have a hardware problem...that's gonna be a bummer with no warranty in the US...
go to "for developers" menu and find here bletooth audio codec, for me work SBC but after hour it changes back
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
So you have bluetooth connected to the watch and car at the same time?
If so, my guess would be a setting in the watch for the volume of music. Or in the phone, go to settings / bluetooth / advanced / dual audio. Select it and play with the settings to setup what to do when two bluetooth audio devices are connected
ninjatiger26 said:
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
Click to expand...
Click to collapse
Had the same problem with my cheap external bluetooth to FM adapter.
Turn on Developer Options and adjust the bluetooth profile while connected to your car audio.
Having Dolby Audio set to auto might also have an impact.
Thanks for the advice but no luck so far.
The settings under developers let me change when nothing is connected but they revert back to sbc soon as I leave the menu. And they are locked out when connected.
Also dual audio does nothing.
It only has the issue when the watch is connected.
As if its taking the bandwidth.
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Titokhan said:
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Click to expand...
Click to collapse
Apologies for the delay, has been a mad few days!
Sadly changing the AVRCP didnt help on all versions.
It seems there maybe a weird one however on the codec. It reverts to SBC which from a bit of muddled googling is all my receiver supports. from non iPhone devices. However, it takes AAC if its a iphone.
Seems odd to me however they would limit it. Like i said this is from googling so maybe incorrect.
the stranger part is however i paired up a Oneplus 6 and the watch all was fine on SBC codec. its just watch and the s10+ it has an issue.
Admit very lost on this one.
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Camerena said:
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Click to expand...
Click to collapse
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Outbreak444 said:
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Click to expand...
Click to collapse
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Camerena said:
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Click to expand...
Click to collapse
Why not Google it?maybe you will get a solution for this problem.
Same issue here on my s10+. When playing any audio in my car via BT i hear the distortion/hissing noise especially when the song has a higher treble frequency.
I have just about tried all fixes i could find on Google, and no luck.
When connecting to my ear buds (Jabra Elite 65t) it disappears and checked in developer mode that it supports to AAC for BT Codecs.
But when connecting to the car it reverts to SBC.
The issue clearly lies on Samsungs side, as my brother has a Huawei p30 Pro, also has bluetooth 5 and plays amazingly well in all aspects (Bass-Mids-Treble).
I know I'm posting this almost a year later, but i am desperately looking for a fix.
SN. I have recently updated my phone to Android 10, despite all the complaints to Samsung from many users... Sadly this issue has not beeing fixed on my side.
Does any of you still have the same issue?
I have the same issue with S9(android 10 ui2)
- no dou audio diable option
- bluetooth conected only to my earphones, with no car.
I’ve been a Samsung phone user since the S5 and this issue persists across all their phones since at least that one. The only real solution is to avoid the SBC codec or turn off your watch while listening to music. It will never be patched as it’s been going on for over 6 years. In the early days Galaxy phones only really used SBC so you couldn’t avoid it.
APT-X and AAC are your best options. Good luck finding those on a car system. You can easily find headphones that support them.