Moto G5s plus XT1802 problem. Please help (Dificult) - Moto G5S Plus Questions & Answers

Moto G5s Plus Xt1802 does not work!
My most Moto G5s had a loop problem. It would call itself, switch off and restart itself. It had a own life.
1
Then I got the bootloader after tried several methods. I got the code with a Motorola support.
2
I cannot root! Keep trying, but no success.
3
I already tried to use GZOSP, Liquid Remix, Pixel, Zero, and even return to Original Stock, but I can not. I tried via TWRP or via Prompt ADB.
4
If any ROM is installed, in the first start, this message appears: the password is correct, but unfortunately your data is corrupted. The message is the same, if I type correct password or not.
5.
If an installation is successful, the IMEIs disappear and I cant use the simcard.
The file system is as ext4, but sometimes it appears as e2fs. Could this be wrong? How do I setup this, can you install one of these cost roms? How to mount it correctly?
How should I proceed?
So, I ask for the help of these master experts, because I still can not solve it. Since then I cant use the device, cant enjoy anything of it.
Best Regards, guys!

Always take a backup using twrp before doing anything, keep it safe.
First Make sure that you are using latest TWRP 64 bit recovery.
Download latest Custom ROM and flash it..
For password problem..Wipe Data.
Now check that your IMEI number is OK..and you are getting signal.(if there is no 4G signal.. reply here)
Caution: While flashing Stock Don't use modem erase Commands , otherwise IMEI will be Null..skip these.
If possible take a backup of efs and persist partition..will be helpful in case of emergency.
Avoid volte fix.

crazytech2 said:
Always take a backup using twrp before doing anything, keep it safe.
First Make sure that you are using latest TWRP 64 bit recovery.
Download latest Custom ROM and flash it..
For password problem..Wipe Data.
Now check that your IMEI number is OK..and you are getting signal.(if there is no 4G signal.. reply here)
Caution: While flashing Stock Don't use modem erase Commands , otherwise IMEI will be Null..skip these.
If possible take a backup of efs and persist partition..will be helpful in case of emergency.
Avoid volte fix.
Click to expand...
Click to collapse
Ok, Crazytech,
Your tips have helped a lot.
I installed and am testing Frankenrom.
I noticed that the LTE 4G is not operating, only the 3G +

mdr1982 said:
Ok, Crazytech,
Your tips have helped a lot.
I installed and am testing Frankenrom.
I noticed that the LTE 4G is not operating, only the 3G +
Click to expand...
Click to collapse
Is your IMEI number is visible..*#06#
If yes..Do one more thing..
Restart your phone into Bootloader mode..
Pass these two Commands..
fastboot erase modemst1
fastboot erase modemst2
Reboot Now..and Check 4G signal..!

crazytech2 said:
Is your IMEI number is visible..*#06#
If yes..Do one more thing..
Restart your phone into Bootloader mode..
Pass these two Commands..
fastboot erase modemst1
fastboot erase modemst2
Reboot Now..and Check 4G signal..!
Click to expand...
Click to collapse
Great !!!!
Now LTE 4G works as well.
Sincere thanks.
Someone can remove the message: Your device has been unlocked and can not be trusted. To learn more, visit: motorola.com/unlockbootloader?

mdr1982 said:
Great !!!!
Now LTE 4G works as well.
Sincere thanks.
Someone can remove the message: Your device has been unlocked and can not be trusted. To learn more, visit: motorola.com/unlockbootloader?
Click to expand...
Click to collapse
Now...if you want to flash stock again skip modem erase Commands.. always..!!
Otherswise Null IMEI will be there..!!
What about volte..right now..??

crazytech2 said:
Now...if you want to flash stock again skip modem erase Commands.. always..!!
Otherswise Null IMEI will be there..!!
What about volte..right now..??
Click to expand...
Click to collapse
Well,
I think this Frankenrom ROM has not, I have not seen it yet.
I am paying attention to Motorola's message , to remove this.

mdr1982 said:
Well,
I think this Frankenrom ROM has not, I have not seen it yet.
I am paying attention to Motorola's message , to remove this.
Click to expand...
Click to collapse
Flash a Custom logo.bin..this message will be hidden..no more visibility..!!

crazytech2 said:
Flash a Custom logo.bin..this message will be hidden..no more visibility..!!
Click to expand...
Click to collapse
Im Trying, but no success:
"flashboot flash logo logo.bin"
dont work

mdr1982 said:
Im Trying, but no success:
"flashboot flash logo logo.bin"
dont work
Click to expand...
Click to collapse
Right now..on which rom are you trying this. ?
Check this may be helpful..
https://forum.xda-developers.com/moto-g5s-plus/themes/logo-bin-nice-bootloader-images-t3692228
https://forum.xda-developers.com/mo...ove-unlocked-bootloader-message-moto-t3672419

crazytech2 said:
Right now..on which rom are you trying this. ?
Check this may be helpful..
https://forum.xda-developers.com/moto-g5s-plus/themes/logo-bin-nice-bootloader-images-t3692228
https://forum.xda-developers.com/mo...ove-unlocked-bootloader-message-moto-t3672419
Click to expand...
Click to collapse
Solved logo problem.
I used Motorola Logo Maker and created my own logo
And then flash with fastboot.
https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667

mdr1982 said:
Solved logo problem.
I used Motorola Logo Maker and created my own logo
And then flash with fastboot.
https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667
Click to expand...
Click to collapse
Fantastic..!
Enjoy..!!

Some custom ROMs have some password even if u don't put them ..... So flash the lock fixer zip from twrp

Related

SOLUTION those stuck in a bootloop with locked bootloader & TWRP

Hi All
Got into a bit of a situation when I re-locked my bootloader and got stuck in a loop, unable to unlock it because of the developer settings option. I had nothing but the TWRP screen bootlooping.
Anyway, sorted it out for those who want to know how. In the bootloader run the commands "fastboot format cache" and "fastboot format userdata"
Then choose to boot into recovery, it'll work and you'll be in TWRP. From there you can flash a ROM, enable the setting in developer options & unlock the bootloader!
Credit goes to geologic in this thread here: http://forum.xda-developers.com/nexus-9/help/warning-locking-bootloader-disabling-t2951312/page5
Good news to anyone having alternative recovery. Unfortunately will not work with stock recovery
Great thanks
Sorry for my poor english (I'm french). Great thanks for your solution. It works fine for me... I was afraid during a few hours to be forced to throw away my Nexus 6....
Thank you for that information. I was in the same position and your instructions helped me get my device working again. That Check 'Allow OEM Unlock' in Developer Options flag is a real game changer for those of us who are used to flashing our devices and one must be very careful.
freeman_g said:
Good news to anyone having alternative recovery. Unfortunately will not work with stock recovery
Click to expand...
Click to collapse
Shouldn't you be able to adb side load a stock ROM?
Thank You
ixa20 said:
Hi All
Got into a bit of a situation when I re-locked my bootloader and got stuck in a loop, unable to unlock it because of the developer settings option. I had nothing but the TWRP screen bootlooping.
Anyway, sorted it out for those who want to know how. In the bootloader run the commands "fastboot format cache" and "fastboot format userdata"
Then choose to boot into recovery, it'll work and you'll be in TWRP. From there you can flash a ROM, enable the setting in developer options & unlock the bootloader!
Credit goes to geologic in this thread here: http://forum.xda-developers.com/nexus-9/help/warning-locking-bootloader-disabling-t2951312/page5
Click to expand...
Click to collapse
Thank You so much you saved my day , I thought their is no solution for this but you saved me. :good::laugh::laugh:
Thanks a million!!
ixa20 said:
Hi All
Got into a bit of a situation when I re-locked my bootloader and got stuck in a loop, unable to unlock it because of the developer settings option. I had nothing but the TWRP screen bootlooping.
Anyway, sorted it out for those who want to know how. In the bootloader run the commands "fastboot format cache" and "fastboot format userdata"
Then choose to boot into recovery, it'll work and you'll be in TWRP. From there you can flash a ROM, enable the setting in developer options & unlock the bootloader!
Credit goes to geologic in this thread here: http://forum.xda-developers.com/nexus-9/help/warning-locking-bootloader-disabling-t2951312/page5
Click to expand...
Click to collapse
Thank you so much, I owe you a life debt. haha now i can take one step closer to freedom.
How can you use fastboot format cache and fastboot format userdata when the bootloader is locked? I'm on an N6, but I've had 0 luck with that.
mrkmrk said:
How can you use fastboot format cache and fastboot format userdata when the bootloader is locked? I'm on an N6, but I've had 0 luck with that.
Click to expand...
Click to collapse
You just can. It allows it.
Just went through the same thing and can confirm that fastboot format cache and fastboot format userdata got me back into recovery.
However, Recovery was showing 0MB storage space so I couldn't push anything to the SDcard for install. @rootSU recommended that I go into wipe and perform a full format (the one that requires you to type "yes"). I did this and my storage was back to normal and I was able to push a ROM to the SD card and flash it.
Problem solved!
sn0warmy said:
Just went through the same thing and can confirm that fastboot format cache and fastboot format userdata got me back into recovery.
However, Recovery was showing 0MB storage space so I couldn't push anything to the SDcard for install. @supersu recommended that I go into wipe and perform a full format (the one that requires you to type "yes"). I did this and my storage was back to normal and I was able to push a ROM to the SD card and flash it.
Problem solved!
Click to expand...
Click to collapse
That's nice to give credit to the guy that helped you. But it was @rootSU
cam30era said:
That's nice to give credit to the guy that helped you. But it was @rootSU
Click to expand...
Click to collapse
Haha whoops! Thanks!
sn0warmy said:
Haha whoops! Thanks!
Click to expand...
Click to collapse
Know how I know?
Because I did it too.
cam30era said:
Know how I know?
Because I did it too.
Click to expand...
Click to collapse
There are too many "SU" screen names to keep track of. Either that, or my brain is fried from all the trouble shooting this morning.
sn0warmy said:
There are too many "SU" screen names to keep track of. Either that, or my brain is fried from all the trouble shooting this morning.
Click to expand...
Click to collapse
Maybe I need name change.
rootSU said:
Maybe I need name change.
Click to expand...
Click to collapse
ACE!
Htc butterfly s 9060 bootloop
ixa20 said:
Hi All
Got into a bit of a situation when I re-locked my bootloader and got stuck in a loop, unable to unlock it because of the developer settings option. I had nothing but the TWRP screen bootlooping.
Anyway, sorted it out for those who want to know how. In the bootloader run the commands "fastboot format cache" and "fastboot format userdata"
Then choose to boot into recovery, it'll work and you'll be in TWRP. From there you can flash a ROM, enable the setting in developer options & unlock the bootloader!
Credit goes to geologic in this thread here: http://forum.xda-developers.com/nexus-9/help/warning-locking-bootloader-disabling-t2951312/page5
Click to expand...
Click to collapse
my phone is bootlooping and locked bootloader and not have twrp recovery....xda is very big site for android development after that no buddy help m... so plz help i m crying now..
abby1996 said:
my phone is bootlooping and locked bootloader and not have twrp recovery....xda is very big site for android development after that no buddy help m... so plz help i m crying now..
Click to expand...
Click to collapse
You can try >
fastboot format cache
fastboot format userdata
Note that if this works, it will wipe your SDcard.
If it doesn't work, you have no other options. Return it for repair or replacement.
Thank you soo much for reply
cam30era said:
You can try >
fastboot format cache
fastboot format userdata
Note that if this works, it will wipe your SDcard.
If it doesn't work, you have no other options. Return it for repair or replacement.
Click to expand...
Click to collapse
yes, this commnd works but what i do after that please tell ..i m new ....but i have recovery.zip and boot.img .i find these from other threats...how i flash this in locked bootloader..please tell in brief. Thanks
abby1996 said:
yes, this commnd works but what i do after that please tell ..i m new ....but i have recovery.zip and boot.img .i find these from other threats...how i flash this in locked bootloader..please tell in brief. Thanks
Click to expand...
Click to collapse
fastboot reboot

Mi 3 Partitions Removed.

I restored my twrp backup and after that my internal memory was showing 0 mb. Actually userdata partition wasn't there. I tried to create it and ended up removing recovery, system partitions. Now my phone is in fastboot and I donot have system, recovery partitions. I can't go to recovery or use adb. Please help me how can i reset my partitions now or boot my device :crying:
Is there any way with which i can modify my partitions using fastboot?
Use MiFlash tool and flash the latest fastboot rom.
varun.singh286 said:
Use MiFlash tool and flash the latest fastboot rom.
Click to expand...
Click to collapse
Mi flash fails everytime saying no partitions found.
When I try to flash recovery in fastboot, again it says recovery partition not found.
you bricked your phone
erase all partitons using fastoot erase command excpet modemst1, modemst2, fsg and fsc (Do not erase those partitons)
then follow this tutorial
http://en.miui.com/thread-73348-1-1.html
if u need more help pm me
Abhi142 said:
you bricked your phone
erase all partitons using fastoot erase command excpet modemst1, modemst2, fsg and fsc (Do not erase those partitons)
then follow this tutorial
http://en.miui.com/thread-73348-1-1.html
if u need more help pm me
Click to expand...
Click to collapse
Now my phone is completely Bricked ?
Nothing appears on the screen, no led. Pc shows unknown device.
IAmKifayat said:
Now my phone is completely Bricked ��
Nothing appears on the screen, no led. Pc shows unknown device.
Click to expand...
Click to collapse
follow thus tutorial
http://en.miui.com/thread-73348-1-1.html
which operating system r u using windows 7 or windows 8?
Abhi142 said:
follow thus tutorial
http://en.miui.com/thread-73348-1-1.html
which operating system r u using windows 7 or windows 8?
Click to expand...
Click to collapse
It is very tricky to dismantle Mi 3, I may destroy touch display. I will send it to service centre.
IAmKifayat said:
It is very tricky to dismantle Mi 3, I may destroy touch display. I will send it to service centre.
Click to expand...
Click to collapse
what does it show in device manager when you connect it to PC??
varun.singh286 said:
what does it show in device manager when you connect it to PC??
Click to expand...
Click to collapse
I had fastboot acess, I could have used Ramm's way to flash the partitions but I didn't knew about it at that time and erased all the partitions. First it was showing unknown device and after that nothing.
Ps: I removed the back cover and fixed it
Abhi142 said:
you bricked your phone
erase all partitons using fastoot erase command excpet modemst1, modemst2, fsg and fsc (Do not erase those partitons)
then follow this tutorial
http://en.miui.com/thread-73348-1-1.html
if u need more help pm me
Click to expand...
Click to collapse
How to erase my extended partition?? I facing same issue ! Using MItool & fastboot flash using CMD laptop windows 7 failed i get
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
If ur phn is going into fastboot follow dis nd relax en.miui.com/thread-209941-1-1.html
amarjot25 said:
If ur phn is going into fastboot follow dis nd relax en.miui.com/thread-209941-1-1.html
Click to expand...
Click to collapse
This is for Marshmallow & my phone before Bricked is using LP rom... Look like high risk for this method... Can you suggest other way for LP rom ? i more like to use LP rom :good:
coolkillermax said:
This is for Marshmallow & my phone before Bricked is using LP rom... Look like high risk for this method... Can you suggest other way for LP rom ? i more like to use LP rom :good:
Click to expand...
Click to collapse
Bro dis is nt related to ny rom. it will just make a single partition for system and another for internal storage. den u can flash ny rom
amarjot25 said:
Bro dis is nt related to ny rom. it will just make a single partition for system and another for internal storage. den u can flash ny rom
Click to expand...
Click to collapse
Oh i see & i put some links here for you to understanding that methods i try before until now still did not work at all Can you look into it... Thx in advance
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583/page2
coolkillermax said:
Oh i see & i put some links here for you to understanding that methods i try before until now still did not work at all Can you look into it... Thx in advance
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583/page2
Click to expand...
Click to collapse
yes i found that a few images were not flashed.
refer to the site ive given for all images to be flashed.
http://files.gogaz.org/cancro_images_4.4.18_4.3/images/
amarjot25 said:
yes i found that a few images were not flashed.
refer to the site ive given for all images to be flashed.
http://files.gogaz.org/cancro_images_4.4.18_4.3/images/
Click to expand...
Click to collapse
So how to do it & i still beginner for bricked issues?Can you assist me step by step.
Sent from my Lenovo K860i using xda premium
coolkillermax said:
So how to do it & i still beginner for bricked issues?Can you assist me step by step.
Sent from my Lenovo K860i using xda premium
Click to expand...
Click to collapse
The miui link dat i gave u download the cancro merge partition zip ok extract it and ull find a folder named images. Luk into dis folder ull know about all the images dat r required to be flashed before flashing any kernel or rom ok.
A simple fastboot flash all is enough and ull have ur mi3 ready once again to flash ny custom rom and gapps.
In d same link the developer has created a special recovery compatible wid merged partition which will help u to flash ny rom dat u want.
All d best
fix
http://en.miui.com/thread-243483-1-1.html
try this ,will surely work
Harsimratsethi said:
http://en.miui.com/thread-243483-1-1.html
try this ,will surely work
Click to expand...
Click to collapse
Now My mi3 when i charge it,Red LED light just blinking & totally can't boot to fastboot mode How to fix?
Sent from my Lenovo K860i using xda premium
Workaround
coolkillermax said:
Now My mi3 when i charge it,Red LED light just blinking & totally can't boot to fastboot mode How to fix?
Try to charge your device for 3 hours then try again.
Click to expand...
Click to collapse

bootloop xt1254 mcg24.251-5-5

Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
chio_chilo said:
Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
Click to expand...
Click to collapse
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? You can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. It's posted here in this forum only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
ChazzMatt said:
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? Your can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. Its only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
Click to expand...
Click to collapse
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
chio_chilo said:
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
Click to expand...
Click to collapse
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Wellingtonwff said:
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Click to expand...
Click to collapse
Did you just flash the mcg24.251-5-5 or did you also flash initroot (temp root) file?
See below.
Ricardo2003 said:
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
Click to expand...
Click to collapse
Also note there is a space before and between double quotation marks:
beaups said:
fastboot oem config fsg-id " "
Note the space in between the quotes.
Click to expand...
Click to collapse
I just flashed the ROM with the rsd and it get in the bootloop when I restarted the phone.
How can I flash this initiroot? Does it came in the Root's folder? I flash this before the stock room? I'm confused, sorry about that hehehehe.
Thanks for all attention!
if you use the auto#initroot tethered jailbreak tool in before , just run it again.
I get this moto logo reboot problem in few days before, and I read many page for get this answer.
the temp root tool use some system issue , and it will cause this xt1254 boot loop issue , just run the auto#initroot.windows.bat again . phone will reboot to normally.

Phone stuck on color lines at bootup

Hello i tried to flash new roms but i think my phone is bricked now. i have tried to unbrick. Every time i flash a rom it says done after 1 second. So i know its not flashing properly. before i go buy a new phone can someone help me out please.
Thank you so much
lonster27 said:
Hello i tried to flash new roms but i think my phone is bricked now. i have tried to unbrick. Every time i flash a rom it says done after 1 second. So i know its not flashing properly. before i go buy a new phone can someone help me out please.
Thank you so much
Click to expand...
Click to collapse
Tell us what exactly you did and what exactly fastboot is outputting
Benjamin_L said:
Tell us what exactly you did and what exactly fastboot is outputting
Click to expand...
Click to collapse
i unlocked it which worked and i could still get back into the phone. Then i installed twrp recovery on the phone and then installed from there DM verity disabler. after that is was bricked. now i can not even get back into twrp i just freezes. i am still able to get into fastboot that is all.
lonster27 said:
i unlocked it which worked and i could still get back into the phone. Then i installed twrp recovery on the phone and then installed from there DM verity disabler. after that is was bricked. now i can not even get back into twrp i just freezes. i am still able to get into fastboot that is all.
Click to expand...
Click to collapse
Then you can still flash the fastboot roms. Guides are found here. Or use the included script.
Why would I want to disable dm verity after all?
Benjamin_L said:
Then you can still flash the fastboot roms. Guides are found here. Or use the included script.
Why would I want to disable dm verity after all?
Click to expand...
Click to collapse
thanks can you please maybe provide a link for me please for both methods.
i got the same result when i rebooted the phone after trying to clear the cache in chrome browser ...

Question how to get rid of Dm-VERITY corruption on boot

Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
forget this..i've got ROOT check the other thread !
How do you fix it?
simika said:
forget this..i've got ROOT check the other thread !
Click to expand...
Click to collapse
How did you managed to fix this?
by reading lol.. check the other thread all written
For reference to whoever that are confused about where to look for the solution.
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
Download the vbmeta and flash it via fastboot to get rid of the dm-verify.
simika said:
by reading lol.. check the other thread all written
Click to expand...
Click to collapse
Could you reference a link or give me a little how to?
I tried a lot now:
- Installed a new Firmware trough Fastboot
- Using MsmDownload Tool
nothing helped so far.
So it would be great if you could assist in any way.
simika said:
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
Click to expand...
Click to collapse
I done everything but my phone doesn't unlock so now I have the dm-verity warning and I can't do a clean flash with Miflash. Also Miflash Unlock doesn't work. What I can do now?
if you can enter in fastboot mode, reflash stock boot and vbmeta
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
How can I do? Miflash says:
error:Writing 'crclist' FAILED (remote: 'not allowed in locked state')
bro you have relock bootloader, this is a fatal error. the only way is try to unlock with an mtk tool that do this via pc. you can find on internet. search unlock all mtk devices. i think there a link also on xda
Just realized that the M3 thread, my phone is a M4.
.
@simika how are you sending this question?
1. Hello friends, there are two ways to fix this problem, first you need Root, I read your Root tutorial, your tutorial is very good, and after using Root, you need to download any file manager, give Root Permissions, you need to backup your baseband, nvram nvdata nvcfg backup and save, you also need an MTK Bypass, you can search for MTK Auth Bypass Tool through Google, you also need to use SP Flash to flash the machine, you need to download the official firmware package, which can be downloaded from xiaomirom.com , download the corresponding version, use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, But you have backed up. Boot through fastboot to unlock the BL lock, perform fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. Congratulations The baseband is back, I'm a novice, my instructions are not comprehensive, such as where is the baseband location, but I have too many characters, I will list the baseband location. 2. Replace a new motherboard, all mobile phone problems are all solve.
Hope to help you.
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
Thanks. This worked on my Umidigi A11 phone.
xdadev_user11 said:
Thanks. This worked on my Umidigi A11 phone.
Click to expand...
Click to collapse
nice!
hello i got the same problem today, my phone is redmi9a can some help me regarding to this error ?
i had this problem even though i never unlocked my bootloader so i couldnt flash anything to fix it. but when i got the miui 13 update it fixed it for me
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
What if you cant enter fastboot?

Categories

Resources