Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
chio_chilo said:
Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
Click to expand...
Click to collapse
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? You can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. It's posted here in this forum only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
ChazzMatt said:
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? Your can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. Its only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
Click to expand...
Click to collapse
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
chio_chilo said:
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
Click to expand...
Click to collapse
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Wellingtonwff said:
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Click to expand...
Click to collapse
Did you just flash the mcg24.251-5-5 or did you also flash initroot (temp root) file?
See below.
Ricardo2003 said:
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
Click to expand...
Click to collapse
Also note there is a space before and between double quotation marks:
beaups said:
fastboot oem config fsg-id " "
Note the space in between the quotes.
Click to expand...
Click to collapse
I just flashed the ROM with the rsd and it get in the bootloop when I restarted the phone.
How can I flash this initiroot? Does it came in the Root's folder? I flash this before the stock room? I'm confused, sorry about that hehehehe.
Thanks for all attention!
if you use the auto#initroot tethered jailbreak tool in before , just run it again.
I get this moto logo reboot problem in few days before, and I read many page for get this answer.
the temp root tool use some system issue , and it will cause this xt1254 boot loop issue , just run the auto#initroot.windows.bat again . phone will reboot to normally.
Related
Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
FlexZer0 said:
Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
Click to expand...
Click to collapse
A couple questions: first, did you use any of the root 'exploits' before you unlocked the bootloader? If you did then you need to return to Stock before you can flash custom recovery.
Did you use 'mfastboot' to flash TWRP? If not, try that.
There is one individual I helped that had a similar issue. We never figured out what the problem was, but I had him follow the instructions in the "Return to Stock" thread to flash the entire Stock SBF for their carrier, and afterwards the recovery flashed PERFECT. If you do this, be SURE to flash ONLY the same version you are currently on. Do NOT 'downgrade' or flash an earlier firmware version.
Now you have some ideas. Let us know if they help resolve your issue.
http://forum.xda-developers.com/showthread.php?t=2404256
Questions go in the Q&A section.
@FlexZer0,
As @samwathegreat mentioned, if you have rooted using something like SlapMyMoto, RockMyMoto, or PwnMyMoto, or have used MotoWpNoMo on this phone, you'll probably want want to flash your full SBF to get back to stock. (make sure you use the EXACT same rom as what is currently on your phone!!! do NOT attempt to downgrade!!)
In addition to that, something that is VERY important... immediately after flashing custom recovery, you want to reboot into bootloader/fastboot mode and go into recovery. You do NOT want to flash recovery and then reboot normally. For some reason this step is necessary or the recovery doesn't "stick." For example, see steps 8 & 9 at -> http://forum.xda-developers.com/moto-x/moto-x-qa/step-step-instructions-unlocking-t2649738
Now, if you follow that entire process, please keep in mind it was written/posted a while ago, so it has older links to mFastboot, TWRP and SuperSU...
The latest can be found at the following:
TWRP -> http://teamw.in/project/twrp2/234
SuperSU -> http://forum.xda-developers.com/moto-x/moto-x-qa/step-step-instructions-unlocking-t2649738
mFastboot -> http://mark.cdmaforums.com/ADB.htm
FlexZer0 said:
Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
Click to expand...
Click to collapse
how are you trying to boot recovery? did you notice the legend?:
Vol Up: Selects
Vol Down: Scrolls
Thanks for the replay guys I know how to boot to the recovery and how to get into the fastboot mode. And I have moto x carrier free which means it's does not locked with the carrier like AT&T and Verizone etc. So whenever I searched for the exploits I only found the exploits for carrier locked versions of moto x.
Sent from my XT1052 using XDA Free mobile app
FlexZer0 said:
Thanks for the replay guys I know how to boot to the recovery and how to get into the fastboot mode. And I have moto x carrier free which means it's does not locked with the carrier like AT&T and Verizone etc. So whenever I searched for the exploits I only found the exploits for carrier locked versions of moto x.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
How exactly did you "unlock" the bootloader? From Motorola's official website?
samwathegreat said:
How exactly did you "unlock" the bootloader? From Motorola's official website?
Click to expand...
Click to collapse
Yup from motorola's website. I got bootloader unlocked warning screen while booting and boot loader status: unlocked in fastboot mode so I'm pretty sure it's unblocked.
Sent from my XT1052 using XDA Free mobile app
FlexZer0 said:
Yup from motorola's website. I got bootloader unlocked warning screen while booting and boot loader status: unlocked in fastboot mode so I'm pretty sure it's unblocked.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK, good.
Did you try my advice from Post # 2? Flashing the entire Stock SBF for your carrier? Then after a successful boot, flash TWRP again, and afterwards, type:
fastboot reboot-bootloader
then use VOL DOWN to select recovery, and VOL UP to select it?
Hey guys, I just recieved my Moto G 2014 and the first thing after my initial boot (to make sure everything was working) I did was unlock the bootloader, flash twrp, and root.
I just booted it up for the first time after doing all that and my wifi won't turn on. Toggling it on causes the switch to immediately go back off.
Is it a radio problem? I didn't touch any files other than logo.bin, recovery, or boot.img.
Can anyone help? Thanks.
Edit: It seems that whatever guide I followed had me flash a boot.img that probably messed my phone up. How can I get the original boot.img for my phone? This is the guide I used, which I got from the xda portal. It seems a few other people had problems with wifi in that thread, but a solution was never posted.
Edit2: I downloaded a stock based rom for the moto g 2014 and flashed the boot.img from it, but now I can't get root, even after flashing the supersu zip in recovery. Can anyone help?
Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.
Wolfcity said:
Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.
Click to expand...
Click to collapse
Eh, I don't think so. The root process, in all reality, should just be unlock bootloader, flash recovery, flash supersu if I'm not mistaken. I've done all that and i still can't get root. At least my wifi works again though.
Flash complete stock rom and try again.
I unlocked bootloader, rooted by booting (instead of flashing) into TWRP 2.8.5.0 and flashed SuperSU 2.46 without any problems. There must have been something wrong with the first boot.img.
Sent from my XT1068 using XDA Free mobile app
Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola
My solution
quanic said:
Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola
Click to expand...
Click to collapse
I had the same problem but could solve it as follows:
Download the file WCNSS_qcom_wlan_factory_nv.rar
Extract the file "WCNSS_qcom_wlan_factory_nv.bin" to folder "/persist" (root required)
Restart system
Information taken from the post http://forum.xda-developers.com/moto-g-2014/general/fix-wifi-missing-file-t3007540
Hi, I had the same problem . If WIFI DONT TURN ON .then u might have not used the command fastboot flashing unlock_critical . Try using this command will work for sure. If it didn't work flash using miflashtool but don't select clear all instead select 2nd option only storage
Hi everybody,
A few days ago, I rooted my Mexican XT1225. I shut it down for a day (my main cellphone is the new Moto X), turn it on again and now it's stuck on fastboot.
I could boot into TWRP (by flashing it temporarily with fastboot on Linux) and then I decided to wipe data and then install the new lollipop zip file. But it failed saying it could not mount /system /data or anything really, I basically have it without format, all partitions say 0MB.
So I tried flashing with fastboot, but it gave me an error when flashing the partition gpt.bin, it didn't give me an error when flashing other files. Still stuck, now I cannot even access the recovery menu, it goes just into fastboot mode and does not show the little recovery menu anymore.
Then I tried flashing with RSD, still same problem. It fails when setting the fb_mode_set and when I delete that line from the xml it fails again on flashing gpt.bin
EDIT: I am attaching a log file of TWRP evidencing this.
Any ideas on how to get back to normal? How can I redo the partition in another way?
Thanks in advance,
Gustavo
Unlocked bootloader? Just remove the got. Bin flash line
Jaocagomez said:
Unlocked bootloader? Just remove the got. Bin flash line
Click to expand...
Click to collapse
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
gusbeto37 said:
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
Click to expand...
Click to collapse
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Jaocagomez said:
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Click to expand...
Click to collapse
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
gusbeto37 said:
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
Click to expand...
Click to collapse
Twrp for this device it's not very stable I got that errors too
Just flash mexico firmware then the OTA zip on stock recovery and you will be good to go.
If you can't access recovery press vol- and power with the phone turned off and you'll be able to select recovery
Hi,
I have tried the vol+power and cannot access recovery.
When I try to flash Mexico's firmware (through either RSD or manually in Linux using fastboot), I am unable to flash partition gpt.bin, but I can flash everything else. Yet, in spite of flashing everything else, I cannot get out of the fastboot loop.
I am attaching some photos of what happens. The first one is the only thing that boots, cannot access recovery, cannot boot normally. The second photo is what happens when I press the volume button many times.
So when you select recovery does it power off or just go back to fastboot again?
Steve-x said:
So when you select recovery does it power off or just go back to fastboot again?
Click to expand...
Click to collapse
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
gusbeto37 said:
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Click to expand...
Click to collapse
flash mexican stock rom with rsd lite
Steve-x said:
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
Click to expand...
Click to collapse
Hola Steve,
Indeed, it looks like the partition table is messed up, I will look for that Moto X thread.
@Jaocagomez I have tried that, but it fails with gpt.bin partition flash and even after flashing everything else (RSD, fastboot or TWRP) it does not work.
After reading quite a lot on the Internet, it seems that my problem happened to some Moto G and Moto X users. Seems to be that I am trying to flash a gpt.bin that is older than the one already in my phone. I will try again when the Mexican Lollipop image is released in xml.zip format.
In the mean time, I will continue to search for solutions.
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Stuck in fastboot
rehaili said:
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Click to expand...
Click to collapse
I am facing the same problem
Though my device is different : XT1254 (verizon locked)
As bootloader is not unlocked, i cannot flash any software any way. Tried all the software from all the countries but to no avail.
The Phone is stuck in fastboot mode.
Please help
You 1225 folks might want to wander into this thread... http://forum.xda-developers.com/droid-turbo/general/tutorial-to-kk-soak-lollipop-t3041129 ... I've hashed my phone out a couple times between CM, lollipop, exposed, playing with the kernal and so on and it got me back up and running.
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
jazzus said:
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
Click to expand...
Click to collapse
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Steve-x said:
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Click to expand...
Click to collapse
Ok fixed, after 20 or 30 tries I was able to enter recovery Thx!
bootloop. & bootloader is locked. And I do not have usb debugging enabled. Any way to get around this?
Depends... You're quite sparse with information about what you've done to get to where you are and about your setup.
A few options come to mind. If you have TWRP you can try flashing a custom rom zip and that could fix it. You could also try the special N preview OTA that google provided to fix phones that got screwed up by an N OTA. http://forum.xda-developers.com/nexus-6/general/to-save-bricked-nexus-device-t3334660
Yeah sorry about that. While updating to 6.0 the phone died. And is now stuck in a bootloop (stuck at the google logo screen). I was trying to use nexus root toolkit to flash stuck android back onto it, however my bootloader is locked. And I did not have usb debugging enabled either. So I am trying to find a way to unlock my bootloader. If that makes any sense
Use the second method I suggested. Should work.
Can you get in bootloader or recovery mode?
http://forum.xda-developers.com/nexus-6/general/to-save-bricked-nexus-device-t3334660
Try to sideload shamu-ota-npc91k-201dd8d1.zip. (This upgrades to Android N Preview.)
Since the OTA is a complete image, it should restore the device to working condition. Then you should be able to enable USB debugging and OEM unlock so the bootloader can be unlocked through fastboot.
Sorry for the late replies. I am attempting the second method & I am able to boot into recovery mode. However I keep getting "adb server is out of date" so I am trying to work it out at the moment
This worked for me! Locked bootloader, no usb debugging, no custom recovery, stuck in bootloop due to software issues.
Bootloader showing engineering
Hi,
I-ve attempted to do the manual upgrade from Android 5.0 to 6.0.1, when running the restart on my Motorola Nexus 6. the screen is showing Bootloader status> Engineering mode.
Somebody told me I would not be able to update this phone because is a prototype or something like that, I need help with this.... thank you!!
Warhammer143 said:
Hi,
I-ve attempted to do the manual upgrade from Android 5.0 to 6.0.1, when running the restart on my Motorola Nexus 6. the screen is showing Bootloader status> Engineering mode.
Somebody told me I would not be able to update this phone because is a prototype or something like that, I need help with this.... thank you!!
Click to expand...
Click to collapse
have you tried manually flashing/updating your bootloader, via fastboot or flashable zip?
simms22 said:
have you tried manually flashing/updating your bootloader, via fastboot or flashable zip?
Click to expand...
Click to collapse
tried many things but not sure..
Is there any thread where I can find the instructions???
Warhammer143 said:
tried many things but not sure..
Is there any thread where I can find the instructions???
Click to expand...
Click to collapse
well, instructions, probably not. if its a flashable zip, that means that you can use twrp recovery to flash it. fastboot flashing has to be done while youre in the bootloader, using fastboot. the command is.. fastboot flash bootloader zipname.img
right now am using nexus root toolkit V 2.1.6.....
look. I am really a noob on this topic .... don't know what to do....
Warhammer143 said:
right now am using nexus root toolkit V 2.1.6.....
look. I am really a noob on this topic .... don't know what to do....
Click to expand...
Click to collapse
well, being a noobie, use google to find out about twrp recovery and about fastboot flashing. fastboot flashing would be more important to you, as twrp recovery use is simple when you already have it installed. unfortunately, im at work at the moment, so cant really help out to much.
simms22 said:
well, being a noobie, use google to find out about twrp recovery and about fastboot flashing. fastboot flashing would be more important to you, as twrp recovery use is simple when you already have it installed. unfortunately, im at work at the moment, so cant really help out to much.
Click to expand...
Click to collapse
Well, I will be searching on google, but thanks a lot!
My phone is bricked, need the complete Fastboot flushable signed 28.2 firmware, Oreo 8.1 May Update for the USA retail model of x4
Mod edit: no trading/payments on XDA please... edited.
I have the OTA. Would you be able to use that?
Why not just flash 28.1 full firmware and just take the ota to 28.2 that it offers immediately?
I thought it was possible to downgrade via the fastboot method with any firmware. Doesn't have to be 28.2 to at the very least get your phone back working.
try flashing OTA. adb sideload it.
https://forum.xda-developers.com/moto-x4/help/moto-x4-patch-captured-opw28-2-t3807679
my phone is boot loader locked, with OEM locking option set to OFF, and it does not boot into anything. just Fastboot works. I cannot get recovery to work.
jpolster2005 said:
my phone is boot loader locked, with OEM locking option set to OFF, and it does not boot into anything. just Fastboot works. I cannot get recovery to work.
Click to expand...
Click to collapse
Flash this: https://androidfilehost.com/?fid=962339331458997429
All you need is fastboot.
ptn107 said:
Flash this: https://androidfilehost.com/?fid=962339331458997429
All you need is fastboot.
Click to expand...
Click to collapse
I tried that, validation failed.
does ANYBODY have the Fastboot complete version of 28.2? Please? I need to unblock my phone!
jpolster2005 said:
does ANYBODY have the Fastboot complete version of 28.2? Please? I need to unblock my phone!
Click to expand...
Click to collapse
Are you not able to flash 28.1?
when I try, it says image validation failed. I NEED 28.2 or higher
see, my boot loader was locked when I tried to flash a different rom. I didn't know I needed to unlock the boot loader I thought that step was optional. now im stuck with a phone that only boots to Fastboot, will ONLY accept SIGNED STOCK 28.2 or higher.
Can try https://androidfilehost.com/?w=files&flid=229118 or https://firmware.center/firmware/Motorola/Moto X4/Stock/XT1900-1/
See if it will accept an earlier version. Couldn't hurt in your situation.
I remember some people helped this file: https://forum.xda-developers.com/showpost.php?p=76918099&postcount=7
Haven't tried myself but just do it. Nothing to lose
I have successfully unlocked my Project Fi phone (Moto X4) and would be happy to share the firmware which is OPW28.2 on the build number... If anyone can tell me how to obtain (extract) it from the phone?
( Motorola version: OPW28.46-18 )
I am in the same boat
jpolster2005 said:
when I try, it says image validation failed. I NEED 28.2 or higher
Click to expand...
Click to collapse
I will also sell mine as well
I have tried flashing every firmware and tried to blank flash but could not
jpolster2005 said:
I have tried flashing every firmware and tried to blank flash but could not
Click to expand...
Click to collapse
Have you tried using a different computer or USB port?
Have you ever unlocked the bootloader before? If not, you could send it to Motorola for replacement.
jpolster2005 said:
I have tried flashing every firmware and tried to blank flash but could not
Click to expand...
Click to collapse
Not sure what to tell you from here. Just make sure not to rush any steps due to frustration or impatience.
I was able to return my first Moto X4 on warranty due to playing around with flashing. I'm sticking 100% stock till we get official lineage.
---------- Post added at 04:29 AM ---------- Previous post was at 04:25 AM ----------
jpolster2005 said:
how long before we see one. I have been relegated to using an iPhone 6 32GB! I really NEEEEEEED my phone to not be bricked. I tried to do the blank flash and boot off sd card and all that to no avail. none of it worked. meow I am getting so frustrated.
Click to expand...
Click to collapse
Bad eticate to post about your issue on multiple threads especially when you have your own. I'm sorry, there is no timetable. Could be tomorrow, could be months. This is the risk in flashing, end even worst in our case since Lenovo has not released factory images.
jpolster2005 said:
see, my boot loader was locked when I tried to flash a different rom. I didn't know I needed to unlock the boot loader I thought that step was optional. now im stuck with a phone that only boots to Fastboot, will ONLY accept SIGNED STOCK 28.2 or higher.
Click to expand...
Click to collapse
What fastboot version use? Use Minimal version, maybe works