Wifi won't toggle on after bootloader unlock, root, and new recovery - G 2014 Q&A, Help & Troubleshooting

Hey guys, I just recieved my Moto G 2014 and the first thing after my initial boot (to make sure everything was working) I did was unlock the bootloader, flash twrp, and root.
I just booted it up for the first time after doing all that and my wifi won't turn on. Toggling it on causes the switch to immediately go back off.
Is it a radio problem? I didn't touch any files other than logo.bin, recovery, or boot.img.
Can anyone help? Thanks.
Edit: It seems that whatever guide I followed had me flash a boot.img that probably messed my phone up. How can I get the original boot.img for my phone? This is the guide I used, which I got from the xda portal. It seems a few other people had problems with wifi in that thread, but a solution was never posted.
Edit2: I downloaded a stock based rom for the moto g 2014 and flashed the boot.img from it, but now I can't get root, even after flashing the supersu zip in recovery. Can anyone help?

Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.

Wolfcity said:
Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.
Click to expand...
Click to collapse
Eh, I don't think so. The root process, in all reality, should just be unlock bootloader, flash recovery, flash supersu if I'm not mistaken. I've done all that and i still can't get root. At least my wifi works again though.

Flash complete stock rom and try again.
I unlocked bootloader, rooted by booting (instead of flashing) into TWRP 2.8.5.0 and flashed SuperSU 2.46 without any problems. There must have been something wrong with the first boot.img.
Sent from my XT1068 using XDA Free mobile app

Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola

My solution
quanic said:
Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola
Click to expand...
Click to collapse
I had the same problem but could solve it as follows:
Download the file WCNSS_qcom_wlan_factory_nv.rar
Extract the file "WCNSS_qcom_wlan_factory_nv.bin" to folder "/persist" (root required)
Restart system
Information taken from the post http://forum.xda-developers.com/moto-g-2014/general/fix-wifi-missing-file-t3007540

Hi, I had the same problem . If WIFI DONT TURN ON .then u might have not used the command fastboot flashing unlock_critical . Try using this command will work for sure. If it didn't work flash using miflashtool but don't select clear all instead select 2nd option only storage

Related

Moto x root problem

Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
FlexZer0 said:
Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
Click to expand...
Click to collapse
A couple questions: first, did you use any of the root 'exploits' before you unlocked the bootloader? If you did then you need to return to Stock before you can flash custom recovery.
Did you use 'mfastboot' to flash TWRP? If not, try that.
There is one individual I helped that had a similar issue. We never figured out what the problem was, but I had him follow the instructions in the "Return to Stock" thread to flash the entire Stock SBF for their carrier, and afterwards the recovery flashed PERFECT. If you do this, be SURE to flash ONLY the same version you are currently on. Do NOT 'downgrade' or flash an earlier firmware version.
Now you have some ideas. Let us know if they help resolve your issue.
http://forum.xda-developers.com/showthread.php?t=2404256
Questions go in the Q&A section.
@FlexZer0,
As @samwathegreat mentioned, if you have rooted using something like SlapMyMoto, RockMyMoto, or PwnMyMoto, or have used MotoWpNoMo on this phone, you'll probably want want to flash your full SBF to get back to stock. (make sure you use the EXACT same rom as what is currently on your phone!!! do NOT attempt to downgrade!!)
In addition to that, something that is VERY important... immediately after flashing custom recovery, you want to reboot into bootloader/fastboot mode and go into recovery. You do NOT want to flash recovery and then reboot normally. For some reason this step is necessary or the recovery doesn't "stick." For example, see steps 8 & 9 at -> http://forum.xda-developers.com/moto-x/moto-x-qa/step-step-instructions-unlocking-t2649738
Now, if you follow that entire process, please keep in mind it was written/posted a while ago, so it has older links to mFastboot, TWRP and SuperSU...
The latest can be found at the following:
TWRP -> http://teamw.in/project/twrp2/234
SuperSU -> http://forum.xda-developers.com/moto-x/moto-x-qa/step-step-instructions-unlocking-t2649738
mFastboot -> http://mark.cdmaforums.com/ADB.htm
FlexZer0 said:
Hellow guys.
i have moto x indian version which is region free and i want to root it, so i've unlocked bootloader of it but the problem is whenever i tried to flash the recovery (cmw and trpw both) the imgs flashed successfully but when i tried to boot to the recovery through selecting recovery option it boots normal to the os. i tried it more than 15 times still no luck. any solution for this? your help will be appreciated. Thanks in advanced
Click to expand...
Click to collapse
how are you trying to boot recovery? did you notice the legend?:
Vol Up: Selects
Vol Down: Scrolls
Thanks for the replay guys I know how to boot to the recovery and how to get into the fastboot mode. And I have moto x carrier free which means it's does not locked with the carrier like AT&T and Verizone etc. So whenever I searched for the exploits I only found the exploits for carrier locked versions of moto x.
Sent from my XT1052 using XDA Free mobile app
FlexZer0 said:
Thanks for the replay guys I know how to boot to the recovery and how to get into the fastboot mode. And I have moto x carrier free which means it's does not locked with the carrier like AT&T and Verizone etc. So whenever I searched for the exploits I only found the exploits for carrier locked versions of moto x.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
How exactly did you "unlock" the bootloader? From Motorola's official website?
samwathegreat said:
How exactly did you "unlock" the bootloader? From Motorola's official website?
Click to expand...
Click to collapse
Yup from motorola's website. I got bootloader unlocked warning screen while booting and boot loader status: unlocked in fastboot mode so I'm pretty sure it's unblocked.
Sent from my XT1052 using XDA Free mobile app
FlexZer0 said:
Yup from motorola's website. I got bootloader unlocked warning screen while booting and boot loader status: unlocked in fastboot mode so I'm pretty sure it's unblocked.
Sent from my XT1052 using XDA Free mobile app
Click to expand...
Click to collapse
OK, good.
Did you try my advice from Post # 2? Flashing the entire Stock SBF for your carrier? Then after a successful boot, flash TWRP again, and afterwards, type:
fastboot reboot-bootloader
then use VOL DOWN to select recovery, and VOL UP to select it?

[Q] Stuck on Fastboot

Hi everybody,
A few days ago, I rooted my Mexican XT1225. I shut it down for a day (my main cellphone is the new Moto X), turn it on again and now it's stuck on fastboot.
I could boot into TWRP (by flashing it temporarily with fastboot on Linux) and then I decided to wipe data and then install the new lollipop zip file. But it failed saying it could not mount /system /data or anything really, I basically have it without format, all partitions say 0MB.
So I tried flashing with fastboot, but it gave me an error when flashing the partition gpt.bin, it didn't give me an error when flashing other files. Still stuck, now I cannot even access the recovery menu, it goes just into fastboot mode and does not show the little recovery menu anymore.
Then I tried flashing with RSD, still same problem. It fails when setting the fb_mode_set and when I delete that line from the xml it fails again on flashing gpt.bin
EDIT: I am attaching a log file of TWRP evidencing this.
Any ideas on how to get back to normal? How can I redo the partition in another way?
Thanks in advance,
Gustavo
Unlocked bootloader? Just remove the got. Bin flash line
Jaocagomez said:
Unlocked bootloader? Just remove the got. Bin flash line
Click to expand...
Click to collapse
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
gusbeto37 said:
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
Click to expand...
Click to collapse
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Jaocagomez said:
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Click to expand...
Click to collapse
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
gusbeto37 said:
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
Click to expand...
Click to collapse
Twrp for this device it's not very stable I got that errors too
Just flash mexico firmware then the OTA zip on stock recovery and you will be good to go.
If you can't access recovery press vol- and power with the phone turned off and you'll be able to select recovery
Hi,
I have tried the vol+power and cannot access recovery.
When I try to flash Mexico's firmware (through either RSD or manually in Linux using fastboot), I am unable to flash partition gpt.bin, but I can flash everything else. Yet, in spite of flashing everything else, I cannot get out of the fastboot loop.
I am attaching some photos of what happens. The first one is the only thing that boots, cannot access recovery, cannot boot normally. The second photo is what happens when I press the volume button many times.
So when you select recovery does it power off or just go back to fastboot again?
Steve-x said:
So when you select recovery does it power off or just go back to fastboot again?
Click to expand...
Click to collapse
Hi, I dan only go yo fastboot. The menĂº does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
gusbeto37 said:
Hi, I dan only go yo fastboot. The menĂº does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Click to expand...
Click to collapse
flash mexican stock rom with rsd lite
Steve-x said:
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
Click to expand...
Click to collapse
Hola Steve,
Indeed, it looks like the partition table is messed up, I will look for that Moto X thread.
@Jaocagomez I have tried that, but it fails with gpt.bin partition flash and even after flashing everything else (RSD, fastboot or TWRP) it does not work.
After reading quite a lot on the Internet, it seems that my problem happened to some Moto G and Moto X users. Seems to be that I am trying to flash a gpt.bin that is older than the one already in my phone. I will try again when the Mexican Lollipop image is released in xml.zip format.
In the mean time, I will continue to search for solutions.
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Stuck in fastboot
rehaili said:
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Click to expand...
Click to collapse
I am facing the same problem
Though my device is different : XT1254 (verizon locked)
As bootloader is not unlocked, i cannot flash any software any way. Tried all the software from all the countries but to no avail.
The Phone is stuck in fastboot mode.
Please help
You 1225 folks might want to wander into this thread... http://forum.xda-developers.com/droid-turbo/general/tutorial-to-kk-soak-lollipop-t3041129 ... I've hashed my phone out a couple times between CM, lollipop, exposed, playing with the kernal and so on and it got me back up and running.
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
jazzus said:
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
Click to expand...
Click to collapse
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Steve-x said:
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Click to expand...
Click to collapse
Ok fixed, after 20 or 30 tries I was able to enter recovery Thx!

[urgent] cannot connect to mobile network

after bootloader unlocking my phone, I was at first unable to use the wifi after fastbooting an .img that was featured in @SharkcpN 's tread. I was trying to root my phone when the .img file made me unable to join the wifi. After several attempts to get back wifi, i was able to do so (using a different ROM). But now I am unable to access the mobile network. I have tried using other SIM cards but no results. please help!
Just unlock phone and install twrp not necessary to root if ur going to install a new rom
vaisakmct said:
Just unlock phone and install twrp not necessary to root if ur going to install a new rom
Click to expand...
Click to collapse
I have already unlocked my bootloader, but I thought at first that a root was necessary so i fastbooted the img file which was shown on http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818 . The NA root was different compared to the other variants and after flashing the img, I lost WiFi. After attempts, I was able to get wifi working but with the sacrifice of the mobile network. If anyone is able to maybe find a possible problem and solution that would be great.
05wuz said:
I have already unlocked my bootloader, but I thought at first that a root was necessary so i fastbooted the img file which was shown on http://forum.xda-developers.com/moto-g-2014/general/xt1063-t3018818 . The NA root was different compared to the other variants and after flashing the img, I lost WiFi. After attempts, I was able to get wifi working but with the sacrifice of the mobile network. If anyone is able to maybe find a possible problem and solution that would be great.
Click to expand...
Click to collapse
if u are unlocked plz try to install twrp recovery, root is not necessary
dont try other things,if u want help u can ask
Which model do you have?
vaisakmct said:
if u are unlocked plz try to install twrp recovery, root is not necessary
dont try other things,if u want help u can ask
Click to expand...
Click to collapse
please sir I know how to fastboot twrp
but the problem is that I already flashed a device image on my phone, which could be found on a link above and that images f//ed up my phone and made my wifi not work
KuranKaname said:
Which model do you have?
Click to expand...
Click to collapse
yes I am using XT1064
then clean ur rom with twrp and transfer any rom to ur memory and flash it
wipe already flashed image from twrp recovery sysytem,data,cache,dalvik,etc
then tranfer a rom like cm zip then flash it its all

bootloop xt1254 mcg24.251-5-5

Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
chio_chilo said:
Hi.
My cell came in bootloop, I loaded the original rom by adb fastboot, and everything comes out correct in the load, however, follow the bootloop.
In recovery mode does nothing, re-enter bootloop always.
Has it happened to someone else?
p.d. sorry for my english.
Click to expand...
Click to collapse
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? You can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. It's posted here in this forum only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
ChazzMatt said:
Are you sure you flashed mcg24.251-5-5 (with extra -5 at the end?) And not the previous (mcg24.251-5-5) which would give you a bootloop? Your can't flash a lower version with a locked bootloader.
You're not trying to use the temp root posted in another thread as perpetual temp are you? That also causes bootloop. Its only for using Sunshine to unlock the bootloader.
Just curious, is your bootloader unlocked?
Click to expand...
Click to collapse
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
chio_chilo said:
hi.
I am sure you will try with the rom 5-5
At the end of flashing, everything gave me "OK" (radio, boot, bootloader ...)
I remember if I install the sunshine, but in the end I do not know how to use it. Thinks that maybe that caused the damage.
No, my bootloader is locked.
Click to expand...
Click to collapse
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Wellingtonwff said:
I'm having the same problem =(
Could you help me to solve this? (It's my wife's phone.... so I'm in trouble kkk)
I did everything... and it still in bootloop. I flashed the mcg24.251-5-5 (with extra -5 at the end).
Please, someone help me!!!
Click to expand...
Click to collapse
Did you just flash the mcg24.251-5-5 or did you also flash initroot (temp root) file?
See below.
Ricardo2003 said:
Did you flash an initroot? If you flashed an initroot you'll get it into bootloader and in the ADB & fastboot tools use this command
fastboot oem config fsg-id ""
With two "
Sent from my Droid Turbo using XDA Labs
Click to expand...
Click to collapse
Also note there is a space before and between double quotation marks:
beaups said:
fastboot oem config fsg-id " "
Note the space in between the quotes.
Click to expand...
Click to collapse
I just flashed the ROM with the rsd and it get in the bootloop when I restarted the phone.
How can I flash this initiroot? Does it came in the Root's folder? I flash this before the stock room? I'm confused, sorry about that hehehehe.
Thanks for all attention!
if you use the auto#initroot tethered jailbreak tool in before , just run it again.
I get this moto logo reboot problem in few days before, and I read many page for get this answer.
the temp root tool use some system issue , and it will cause this xt1254 boot loop issue , just run the auto#initroot.windows.bat again . phone will reboot to normally.

H81120x OTA update out. Has anyone still using stock updated to this version?

https://support.t-mobile.com/docs/DOC-28979
Pushed out December 5th, H81120x, just over 79MB, described as "Google monthly security enhancements".
I've forgotten where OTA update files are downloaded too. Can anyone refresh my memory?
Thanks!
This is good to know. Any idea if I need to be worried about the phone being rooted\xposed? This is my first Android device in many years and can't remember how to handle OTAs.
pizzaboy192 said:
This is good to know. Any idea if I need to be worried about the phone being rooted\xposed? This is my first Android device in many years and can't remember how to handle OTAs.
Click to expand...
Click to collapse
some roms get ota some dont you must be on stock rom i guess. or wait till they release KDZ.
raptorddd said:
some roms get ota some dont you must be on stock rom i guess. or wait till they release KDZ.
Click to expand...
Click to collapse
I'm running rooted stock because I need band12 and volte where I live and only stock has that working.
pizzaboy192 said:
I'm running rooted stock because I need band12 and volte where I live and only stock has that working.
Click to expand...
Click to collapse
yeah well i have never recive one since am not in the USA. i always used KDZ. so either flash latest 20v or wait but not sure what rom seems all MM have not been updated.
raptorddd said:
yeah well i have never recive one since am not in the USA. i always used KDZ. so either flash latest 20v or wait but not sure what rom seems all MM have not been updated.
Click to expand...
Click to collapse
I just checked and no updates yet. Maybe Xposed and magisk are messing with it.
Is there a way to install it with TWRP installed? I got it and the phone rebooted but only to TWRP.
thejaredhuang said:
Is there a way to install it with TWRP installed? I got it and the phone rebooted but only to TWRP.
Click to expand...
Click to collapse
I think since the H811 has an unlocked bootloader the easiest way is going to be flashing the stock recovery through TWRP, reboot, install the OTA, and then fastboot back into TWRP and reinstall it. (Unless it keeps root through Magisk or something and then you can just use the TWRP app rooted to reinstall)
few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem
gregoriusaryanto said:
few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem
Click to expand...
Click to collapse
is there a KDZ available yet? maybe you need to do a refurbished flash of KDZ. 20x
pizzaboy192 said:
I think since the H811 has an unlocked bootloader the easiest way is going to be flashing the stock recovery through TWRP, reboot, install the OTA, and then fastboot back into TWRP and reinstall it. (Unless it keeps root through Magisk or something and then you can just use the TWRP app rooted to reinstall)
Click to expand...
Click to collapse
I'm not rooted so no worries. Its there a stock recovery image somewhere or do i need to extract one from the 20v kdz
So is there a directory where the OTA is downloaded to? I have the KDZ for 20v but I can't get a valid cab file to extract the DZ when I use LGExtractor (this is when I'm trying to extract the stock recovery.img).
Update file
Here is the update file for 20x, i extracted it from the /cache directory. I tried to flash it via TWRP but there is some ID checker that errors out and fails to install on TWRP
https://1drv.ms/u/s!AvCSuR2bvtpdg9tZBW-m9yVP6gYGng
For help about root
How to root and install twrp... Plzz help me... Given procedure not working stuck to send command port no.. Position.. Plzzz any one give some help or other way to get root and install twrp. My version is lg g4 h811 20x
Somnathdey said:
How to root and install twrp... Plzz help me... Given procedure not working stuck to send command port no.. Position.. Plzzz any one give some help or other way to get root and install twrp. My version is lg g4 h811 20x
Click to expand...
Click to collapse
THIS MIGHT FACTORY RESET YOUR PHONE. BE SURE YOU ARE OKAY WITH THAT.
1: make sure you've enabled Developer Options in settings (go to About Phone, tap the Build Number a bunch until it pops up saying you've enabled developer options.
2: Make sure you've enabled bootloader unlock in Developer options
3: make sure your device's ADB drivers are installed. The phone comes with the resource CD built in, so you can always use that to make sure it is set up
4: run ADB on your computer, type adb reboot fastboot to get into fastboot mode. The phone should reboot. If it does not, recheck steps 1, 2, and 3.
5: type "fastboot oem unlock". This it should report it as OK or Success. If so, type fastboot reboot. It may or may not factory reset your phone at this point. It didn't with mine but YMMV.
6: once Android has booted, follow the steps to install TWRP. Same steps as above but you'll be booting a TWRP image instead and then flashing it.
For help about root
Have tried this mathod bt still not working my phn stuck in fast boot mode.. In command after typing fastboot oem unlock not working.... Plzz send me some working * platform tools for root in which i can start the command and adb
Somnathdey said:
Have tried this mathod bt still not working my phn stuck in fast boot mode.. In command after typing fastboot oem unlock not working.... Plzz send me some working * platform tools for root in which i can start the command and adb
Click to expand...
Click to collapse
Sure thing. You'll get more help though posting a new thread instead of on one unrelated.
gregoriusaryanto said:
few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem
Click to expand...
Click to collapse
No problem here, try to reset the phone or at least clear the cache of camera.
So my phone finally presented me with the OTA, but it fails to install because of TWRP (expected). I grabbed the update.zip and did the basic modification to allow me to flash it via TWRP but it still fails. LG Bridge doesn't get past checking software version. I am running stock, rooted with Magisk, RCTD removed and some minor root-free debloat (The "uninstall apps for user 0" trick)
What LG OEM apps are required to get LG Bridge to work?
Edit: Could I dirty flash a full stock ROM over it (including stock recovery) to get the OTA to work and then just debloat again?)
Does the KDZ file only come from LG? I wonder if I can update and then somehow extract KDZ to share with everyone...

Categories

Resources