I noticed more people are having same issue as me and I wanted to create a thread to find the solution.
I was running CM7 RC4 / OC 40311 - It was running fine and one day system hung and so I rebooted and that was it.
Symptom :
System boots and pass the "Touch the future Reading" and displays "ANDROID _" on the bottom of the screen and after 10-15 sec it reboots and loop this process.
Things I tried so far :
CWR 3.0.0.5
- Repratition to stock nook.
- Getting error when I try to format system and data - I thought it was because CM7 was setting system to ext4.
- ADB and DD boot.img, System.img and copy Factory to mmcblk0p3
- Try to restore from back up I made
- Nothing works but goes back to boot loop
CWR 3.0.0.6 - One I got from CM7 install to emmc thread
- System format works
- Install latest nightly
- Restore from back up
- ADB can't find device - This is odd and couldn't find a way to fix it yet.
- Tried to install Stock zip but going back to CM7 boot loop
CWR 3.0.1.0
- Can't format data/system
- ADB to delete partitions and create them again but it doesn't help
- Tried all zip files to bring it back to stock - no go
- ADB to copy Factory.zip to emmc partition - umount and mount again then file I copied is gone.
- Deleted partitions and reboot but some how I got back to CM7 loop
If you are having same issue please post and share your experiences so we can find the solution!!!
tuxhacker said:
Symptom :
System boots and pass the "Touch the future Reading" and displays "ANDROID _" on the bottom of the screen and after 10-15 sec it reboots and loop this process.
Click to expand...
Click to collapse
This means the kernel is loading, and most likely the init.encore.rc is running as well. Have you tried grabbing a log from adb logcat? Or perhaps checking if the shell works?
tuxhacker said:
Things I tried so far :
CWR 3.0.0.5
- Repratition to stock nook.
Click to expand...
Click to collapse
How are you repartitioning?
tuxhacker said:
- Getting error when I try to format system and data - I thought it was because CM7 was setting system to ext4.
Click to expand...
Click to collapse
What is the error?
tuxhacker said:
CWR 3.0.1.0
- Can't format data/system
Click to expand...
Click to collapse
Again- if its getting an error, what is that error? Have you tried formatting manually?
tuxhacker said:
- ADB to delete partitions and create them again but it doesn't help
Click to expand...
Click to collapse
Errors? Logs?
You have to be more specific.
- I was flashing "repartition-boot-with-stock.zip" also tried to delete the partitions using fdisk - from adb shell
- And I was getting "Error formatting / system!" and "Error formatting /Data!" from CWR format system and format data
I also tried to format it manually using "mke2fs /dev/block/mmcblk0p1,2 and 3..."
And could you please tell me how to get the log?
Thank you.
have you tried booting off an cwr 3.0.1.0 bootable sd card and formatting reinstalling?
john10101 said:
have you tried booting off an cwr 3.0.1.0 bootable sd card and formatting reinstalling?
Click to expand...
Click to collapse
Yes I have. I tried several times. It seems like my nook is a read only device now. It won't take any changes.
tuxhacker said:
Yes I have. I tried several times. It seems like my nook is a read only device now. It won't take any changes.
Click to expand...
Click to collapse
unpossible!
chisleu said:
unpossible!
Click to expand...
Click to collapse
Here's one example. I did this from CWR 3.0.1.0.
- Mount mmcblk0p3 to emmc
- Copied factory.zip to emmc
- ls -l /emmc to check the new file
- umount /emmc
- Mount /emmc again
- ls -l as you can see old file date again.
Code:
~ # mount -w /dev/block/mmcblk0p3 /emmc
mount -w /dev/block/mmcblk0p3 /emmc
~ # mount
mount
/dev/block/mmcblk0p3 on /emmc type ext2 (rw,errors=continue)
~ # exit
C:\Program Files\Android\android-sdk\platform-tools>adb push factory.zip /emmc
3779 KB/s (168335604 bytes in 43.492s)
C:\Program Files\Android\android-sdk\platform-tools>adb shell
~ # ls -l /emmc
ls -l /emmc
-rw-rw-rw- 1 root root 168335604 Apr 17 04:06 factory.zip
drwx------ 2 root root 12288 Oct 23 05:27 lost+found
-rw-rw-rw- 1 root root 2567 Nov 17 22:27 rombackup.zip
~ # umount /emmc
umount /emmc
~ # mount /dev/block/mmcblk0p3 /emmc
mount /dev/block/mmcblk0p3 /emmc
~ # ls -l emmc
ls -l emmc
-rwxrwxrwx 1 root root 168332495 Nov 11 23:35 factory.zip
drwx------ 2 root root 12288 Oct 23 05:27 lost+found
-rw-rw-rw- 1 root root 2567 Nov 17 22:27 rombackup.zip
~ #
May I ask why you had to mess around with the partitions at all?
lechiffre said:
May I ask why you had to mess around with the partitions at all?
Click to expand...
Click to collapse
It was keep rebooting itself so I was trying to reflash CM7 but didn't work. Next I was going back to stock to start over and that didn't work. Found one thread about DD boot.img, system.img and factory.zip to mmcblk0p3 then 8 failed attempt to restore to stock. etc...
I'm sure that while I was trying to fix I made more mess.
I did adb logcat and got the permission denied error.
Code:
C:\Program Files\Android\android-sdk\platform-tools>adb logcat
- waiting for device -
- exec '/system/bin/sh' failed: Permission denied (13) -
Did you try going into clockwork recovery and using the fix permissions option?
tuxhacker said:
It was keep rebooting itself so I was trying to reflash CM7 but didn't work. Next I was going back to stock to start over and that didn't work. Found one thread about DD boot.img, system.img and factory.zip to mmcblk0p3 then 8 failed attempt to restore to stock. etc...
I'm sure that while I was trying to fix I made more mess.
Click to expand...
Click to collapse
I still don't get why you decided the partitions were faulty.
This might not help you now but might help others in you situation. IMO the process should be when you encounter bootlooping:
1. Reflash current OS using CWR 3.1.0 uSD.
2. If Step 1 fails, using CWR 3.1.0 uSD: format /system /data /cache. Attempt to install CM7. If CM7 install fails, attempt to install stock.
3. ***Requires a a working CWR backup which should contain your original boot partition***
If Step 2 fails, using CWR 3.1.0 uSD: format /system /data /cache and /boot. Restore stock /boot partition only via advanced restore. Attempt to install CM7 or stock.
4. ONLY if the previous steps fail should you even touch any partition tool. I've never had to use any, but I've never messed with the partitions in the first place (ie double booting off eMMC).
Just wanted to share that getting stuck on the boot screen may not have anything todo with what or how you've flashed.
On a fresh install/flash of CM7 I can reboot just fine as many times as I want. As soon as I restore all my apps and reboot I get stuck on the boot screen.
So SOMETHING amongst all the apps I have backed up gets me stuck on the boot screen. Really don't want to go through a reboot for each app one at a time though
FIXED - wipe battery status in CWM
This problem seems to occur when the battery runs out, Nook is plugged in and then it hangs at "the future..."
So to fix this problem, boot into CWM (using CWM for SD) and go to Advanced-Recovery and Wipe Battery Status. Remove the CWM SD and go back to the root menu and reboot.
Your CM7 would boot now just fine. I don;t know what the problem is yet, but that seems to fix it. It saved me from reinstall.
the Nook gets into this state only when the battery is completely drained.
TuxHacker, did you ever resolve your issue of what seems to be the internal memory being in a write-protected state? I'm in the exact same boat you are but instead of CM7 I got CWR 3.0.0.5 installed on my boot and brianf's custom froyo installed.
I agree it seems like the device is now write protected as I've mounted boot/system/media and deleted everything in there, ls'd to double check, but once I remount, all the old stuff is back there again.
I also tried using samuelhalff's NookUMC app to mount all the partitions in windows, deleted everything, and upon remount, all the files are back. The NookUMC app was the one I initially used to copy a bunch of mp3's and vids to the media partition in the first place and now this partition behaves as if it was write-protected as well.
lechiffre said:
I still don't get why you decided the partitions were faulty.
This might not help you now but might help others in you situation. IMO the process should be when you encounter bootlooping:
1. Reflash current OS using CWR 3.1.0 uSD.
2. If Step 1 fails, using CWR 3.1.0 uSD: format /system /data /cache. Attempt to install CM7. If CM7 install fails, attempt to install stock.
3. ***Requires a a working CWR backup which should contain your original boot partition***
If Step 2 fails, using CWR 3.1.0 uSD: format /system /data /cache and /boot. Restore stock /boot partition only via advanced restore. Attempt to install CM7 or stock.
4. ONLY if the previous steps fail should you even touch any partition tool. I've never had to use any, but I've never messed with the partitions in the first place (ie double booting off eMMC).
Click to expand...
Click to collapse
I can't speak for TuxHacker, but mucking around with the partitions seems to be a last ditch effort to at least *change* anything on the device. I've followed a few guides on here about showing the partition table and mine matches a stock partition table. I haven't gotten around to actually modifying any of the partitions yet though...
In all of your steps, the first sub-step is to format one or all of /system /data /cache /boot. This is precisely the step that fails for us with "Error Formatting /system!" or any of the others The only CWR that it doesn't fail on is CWR 3.0.0.6, but any flashes don't take, the NC just reverts back to what it was just before the system decided to go read-only.
I'm running off SD now but that is a pretty crappy experience... if anyone can fix the mess we got ourselves into I will def buy that guy a cold one!
drazil22 said:
In all of your steps, the first sub-step is to format one or all of /system /data /cache /boot. This is precisely the step that fails for us with "Error Formatting /system!" or any of the others The only CWR that it doesn't fail on is CWR 3.0.0.6, but any flashes don't take, the NC just reverts back to what it was just before the system decided to go read-only.
I'm running off SD now but that is a pretty crappy experience... if anyone can fix the mess we got ourselves into I will def buy that guy a cold one!
Click to expand...
Click to collapse
Yes. And on CWR 3.0.0.6 I can't connect via ADB so can't do much with it. On CWR 3.0.1.0 and CWR 3.0.0.5 I can connect via ADB but can't format. I tried all the ADB connect tips and tricks but no go.
I think it coubd be a permission issue since I get - exec '/system/bin/sh' failed: Permission denied (13) - when I tried ABD logcat while its rebooting.
I'm also running off SD now and it is really bad.
I'm in the same boat as you guys and I just wanted to add my two cents.
I've tried multiple times to use the partitioning tools that drazil22 is talking about, but every time I reboot, the partitions come back. What is weird is that while I'm still in adb, after I've written the partition table back to the device, is that it shows the new partition table when I tell it to print it out. I can exit all the way out of adb and, unless I've rebooted my nook, the partitions are back to the way they were. However, once I reboot my nook, the partitions come back...
I've gone as far as deleting every single partition and then rebooting just so that I could have a brick to take back to B&N, but the stupid partitions keep coming back...
lol that's what I was thinking too... brick the thing and get the store to reflash it, as someone else with a bricked nook did. I think the store must have another utility or device to reflash it back to stock.
The weird thing is any changes I make stay for the session until I unmount. I tried to copy the system.img and boot.img which is a little over 500MB to the /media partition (mmcblk0p8) but because I filled it with mp3's and videos, only about 200MB was free and of course the adb push errored out saying not enough space. I then navigated to the /media partition, deleted a bunch of videos and was able to adb push the two files over. I was also able to run the dd commands and got the expected results. Upon reboot, of course nothing got dd'd, the two .img files I copied to /media were gone, and the videos I deleted to free up space were back!
I was also hoping that with the new B&N update to 1.20, they might have released a flashing utility but I guess that was wishful thinking...
Edit: one other peculiar thing I noticed is that when I use adb when booted into CM7 (using the SD), it shows the serial number as 11223344556677. When I use adb booted up using the CWR on my boot partition, or with a bootable SD, it shows the actual serial number written on the sticker behind the sd cover.
getllamasfast said:
I'm in the same boat as you guys and I just wanted to add my two cents.
I've tried multiple times to use the partitioning tools that drazil22 is talking about, but every time I reboot, the partitions come back. What is weird is that while I'm still in adb, after I've written the partition table back to the device, is that it shows the new partition table when I tell it to print it out. I can exit all the way out of adb and, unless I've rebooted my nook, the partitions are back to the way they were. However, once I reboot my nook, the partitions come back...
I've gone as far as deleting every single partition and then rebooting just so that I could have a brick to take back to B&N, but the stupid partitions keep coming back...
Click to expand...
Click to collapse
This is odd, but I dont think this is limited to CM7 as I've seen it happen with different phones running AOSP. Over on the Evo there was numerous accounts of peoples devices suddenly rebooting and then getting stuck in a bootloop, all partitions seemed to be corrupted including the recovery partition and there was absolutely no way to write to the system anymore. Complete booting brick. No one was able to find the cause and no one was able to find a fix.
RileyGrant said:
This is odd, but I dont think this is limited to CM7 as I've seen it happen with different phones running AOSP. Over on the Evo there was numerous accounts of peoples devices suddenly rebooting and then getting stuck in a bootloop, all partitions seemed to be corrupted including the recovery partition and there was absolutely no way to write to the system anymore. Complete booting brick. No one was able to find the cause and no one was able to find a fix.
Click to expand...
Click to collapse
I really hope this isn't true...
On an unrelated note: Do you think that B&N would notice if I microwaved my nook for a few seconds?
Hi people, my problem is that i erase all nexus one files form ClockworkMod Recovery and when i power on the nexus it's go directly to recovery mod.
when i try
adb shell
mount data
adb push C:\ROM.zip /data/
adb shell
recovery –update_package=DATA:ROM.zip
its return
sh: /sbin/postrecoveryboot.sh: not found
when i try apply a zip from sdcard return
E: can't mount /sdcard/
anyone know anything about this ?
You're saying you formatted your system? In that case your ROM is probably gone right? If you have a flashable custom rom in your SD card why don't you flash that from recovery?
Can't you just:
adb push [rom file path] /sdcard/
reboot
Flash that rom ( just any working rom)
???
If that doesn't work and still says can't mount sd have you tried formatting your sd card?
Do you have any recovery backups you can restore?
So I was backing up a rom in TWRP recovery when the phone randomly rebooted. I went back to recovery to see if I could do a backup and now I can't mount the /data directory at all. Whatever I try to do when accessing the directory, it says unable to mount. I tried using the file explorer and it shows an empty directory. Other screens show internal storage as 0mb. I've also tried using CWM but same, can't mount data. I already wiped /system so I can't reboot, and I can't install a rom w/o access to /data (same thing when doing adb sideload).
Any ideas how to get this fixed?
Thanks!
EDIT: Somehow right when I posted this question, I got access to /data again... -_-
EDIT2: Same problem again, tried side loading a rom and can't access data anymore
Same problem again, tried side loading a rom and can't access data anymore... any ideas?!?
Hey friends.I have HTC One (m7) HBOOT(1.61.0000) (OS-7.19.401.30) with TWRP 2.6.3.3.
I did a backup and yesterday i tried to restore and my phone wont start.After that i wipe everything (no OS installed now) and try to flash a ROM(CarbonTEAM-LP5.1.1.C1-RELEASE-20150811-1840-m7.zip) and after unsuccesful flash i thy with (cm-Resurrection_Remix_LP_v5.3.4-20150216-m7.zip) and i get everytime this error
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system,
assuming ext4 mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system:No such file or directory unmount of /system failed; no such volume could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system,assuming ext4 mount:failed /dev/block/platform/msm_sdcc.1/by-name/system at /system:no such file or directory unmount of /system failed; no such volume script succeded:result was[0.2000000].
I get this error either i sideload the ROM.zip file either i put it at sdcard and flash it from recovery.
So how i'm supposed to make it work??To flash a ROM??(tried the above with the CWM too)
THANKS in advance sorry for bad English!!
All roms based on CM must be flashed using TWRP 2.7.1.1 or newer. Update your recovery and flash again.