Hello,
I was transfering some files from my OP3T to my laptop with usb cable, and the screen went freeze-blur and then shut down.
Now it does not turn on, does not vibrate or charging, no led turning on and the pc does not find it anymore. It is dead =/
Do you know why this happened and how to turn it back on?
Thank you in advance
Hi buddy,
This is really strange that your phone is hard bricked after some data transfer.
The only advice I can give is try to search for: "hard bricked oneplus 3(t)" and follow the instruction.
If your phone is not seen as a qualcomm device when you follow the instruction than it could be that you phone is 'dead' by damage from the cable! It's just a guess from my side.
Mnarijnm
Edit: did you tried power + volume up/down?
A battery failure can do that. I would leave it for a few hours and the see if it turns on. If not, try charging it for a few minutes and then try turning it in with the power cable still connected.
Sent from my OnePlus3T using XDA Labs
Try leaving it plugged in for a couple hours, and then holding Power and Home. Weird, but worked for my. Hold it for like 20 seconds or so.
Hello,
thanks for your answers and effort to help me with my bricked phone.
I have managed to find my OP3T on pc under Devices ->ports -> Qualcomm HS USB QDLoader 9008 com3.
Now I am trying to unbrick it with OP3T Unbrick Tool but when I Run MsmDownloadToolV3.0 and press Start , I get a mesaage on 'Communication Status' that say ""Firehose Communication handshake Failed"' and stops, also this message "Sahara communication failed£¬please try again after power off the phone,".
Do you know how to resolve this issue?
Thank you again.
sxizofrano said:
Hello,
I was transfering some files from my OP3T to my laptop with usb cable, and the screen went freeze-blur and then shut down.
Now it does not turn on, does not vibrate or charging, no led turning on and the pc does not find it anymore. It is dead =/
Do you know why this happened and how to turn it back on?
Thank you in advance
Click to expand...
Click to collapse
Try press and hold the power key for like 20 seconds after it vibrates release the power key and press it again when the soft keys light shows up... Hope it'll help.
Make sure your device is properly turned off first of all. You can do that by turning off the device via fastboot menu.
After that, when you are sure device is turned off... make sure to hold 30 seconds... do a little longer even, and plug it in to the USB that is connected to the PC.
I personally did that and it worked well. I also just rebooted my PC and it literally had been on for a couple of seconds, maybe 30 seconds. Started MSM in administrative mode and pressed start. Connected and installation went through.
Had same issues like you before that.
Related
Hi.
So I deleted gmail apk and put inverted gmail apk in system apps. Powered off the phone. Tried to power it back on, nothing happens.
Battery was almost full, about 95%. If I hold power button (tried for like 30secs) nothing happens. No LED, no vibrate, screen is black non-stop.
I also tried power& VOL-, power& VOL+, power & both volume... Nothing.
If I plug it into USB cable from PC, nothing. If I plug in the mains charger, nothing.
Tried holding VOL- (and later VOL+) and plug in USB cable from PC to get into download mode, nothing. Flashtool doesn't see the device.
What the HELL just happened? And what can I do?
Sony update service
tipsek said:
Hi.
So I deleted gmail apk and put inverted gmail apk in system apps. Powered off the phone. Tried to power it back on, nothing happens.
Battery was almost full, about 95%. If I hold power button (tried for like 30secs) nothing happens. No LED, no vibrate, screen is black non-stop.
I also tried power& VOL-, power& VOL+, power & both volume... Nothing.
If I plug it into USB cable from PC, nothing. If I plug in the mains charger, nothing.
Tried holding VOL- (and later VOL+) and plug in USB cable from PC to get into download mode, nothing. Flashtool doesn't see the device.
What the HELL just happened? And what can I do?
Click to expand...
Click to collapse
JUST DOWNLOAD THE UPDATE SERVICE FROM SONY , CHOOSE YOUR DEVICE AND FOLLOW THE INSTRUCTION AND MAYBE IT WILL GET YOUR PHONE WORK .
UPDATE SERVICE LINK
http://www.sonymobile.com/gb/tools/update-service/
Tried Sony Update Service, also PC Companion and flashtool.. The phone appears to be completely dead, like the battery is empty or not even connected. I don't think it's possible that the battery is empty since it had 95% of power when I switched the phone off..
Now that I think about it, it might be possible, that I turned the phone off, didn't wait for it to vibrate and immediately tried to turn it back on.. Does this somehow put the phone in "hard off mode" or something? I mean I'm just guessing here, because I really have no idea what to do :crying:
Hold power button plus volume until u feel 3 vibrates either the phone will come back on or at least u should be able to connect it to the pc opinion.
Sent from my C6603 using xda app-developers app
dante501 said:
Hold power button plus volume until u feel 3 vibrates either the phone will come back on or at least u should be able to connect it to the pc opinion.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
if your computer does not recognize your phone or vice versa your phone is hard brick (reinstall sony driver just to be sure), no other way to revive it unless you can get into recovery.
I had the same problem this morning. Itwas on charge overnight from the GPO and this morning, Nothing.
I tried two things. One was the update as suggested here (which is happening as I speak) and the other was to hold the button and the lower volume switch. I was doing these concurrently, with it plugged into my laptop and something worked. THANKFULLY.
I only got the phone about three weeks ago and this is the second time something like this has happened. First time it was totally dead and I had it swapped one for one. Worst part was I had spent some time updating my phone list etc which was subsequently lost (making me think I was working on my phone memory not the sim....)
I've just updated my NFC firmware, whatever that is, and it has gone into sleep mode. But at least it's working.
My longwinded explanation preceeds a short question.
Is this a common occurence with the Xperia Z?
My wife has exactly the same model only exception being hers is white, mine black. She has had no probs. Knew I shoulda gone the white one.
tipsek said:
Tried Sony Update Service, also PC Companion and flashtool.. The phone appears to be completely dead, like the battery is empty or not even connected. I don't think it's possible that the battery is empty since it had 95% of power when I switched the phone off..
Now that I think about it, it might be possible, that I turned the phone off, didn't wait for it to vibrate and immediately tried to turn it back on.. Does this somehow put the phone in "hard off mode" or something? I mean I'm just guessing here, because I really have no idea what to do :crying:
Click to expand...
Click to collapse
you have to wait at least 30 sec until you switch it on .leave the phone on the charger atleast for 3 hours try to uninstall and reinstall sony drivers . and then try to flash a stock rom using a flash tool
OK, the phone has been charging overnight (no led indication, charger was cold, so was the phone, so I doubt it's even been charging) about 10 hours. Reinstalled drivers, PC Companion, Update service and flashtool.
I tried these 4 options with 3 different variables (for 12 total combinations) 30 seconds each.
1) No cables connected
2) Mains charger connected
3) USB cable from PC connected:
hold [PWR] 30 secs
hold [PWR] + [VOL-] 30 secs
hold [PWR] + [VOL+] 30 secs
hold [PWR] + [VOL-] + [VOL+] 30 secs
After that, I also tried connecting the phone to USB cable to PC, each time with only 1 open program. First with flastool, then PC Companion, then Update Service with 3 different variables (for a total of 9 combinations). 30 seconds each:
without pressing/holding any buttons
hold [VOL+] while connecting
hold [VOL-] while connecting
Also tried a different USB port and cable, but it's 100% not the PC/drivers/USB cable.
No matter what I tried, nothing happened. Screen on the phone is dead all the time, LED light is dead, no vibrations, no sounds, nothing. Also when trying the PC connected options, no sounds, indications of drivers installing/failing, no activity in my computer, NOTHING on PC.
Are there any more options to try? Or must I send the phone in for repair?
And once again, does anyone know if turning off the phone and NOT waiting for it to vibrate and immediatelly trying to turn it back ON, somehow causes this "dead phone"?
No more ideas? Am I the first one to have this issue?
tipsek said:
No more ideas? Am I the first one to have this issue?
Click to expand...
Click to collapse
Seems like you have tried every known possible way to revive it, I think its time you sent it to Sony to have it fixed... I doubt anyone else can help you from here... Good luck.
Sent from my GT-N7100 using xda premium
I'm afraid to send it because I rooted the phone and my country service centres are known to deny warranty repairs for pretty much any reason they can find.. Sometimes they even make up something.. That's why I was hoping I could somehow fix it.. But yeah, seems there is no way I can do it, so I will have to send it in. Will report what happened.
To be fair, if it wont show on computer or boot up, short of them fixing it then checking, there is no way for them to see it has been rooted?
Xperia Z
That should be correct, but thats exactly what im afraid of. Lets say the battery died for instance. They replace it boot up the phone see its rooted and send me a bill. I hope this wont happen, we shall see..
tipsek said:
That should be correct, but thats exactly what im afraid of. Lets say the battery died for instance. They replace it boot up the phone see its rooted and send me a bill. I hope this wont happen, we shall see..
Click to expand...
Click to collapse
Pff, you think technicians are gonna bother opening superuser app to check for root?
I sure hope they wont. Phone has been picked up by delivery service today, that means it will arrive in repair centre by friday, and that means they will start looking at it next week maybe wednesday. Then before they figure out whats wrong, order parts and all, about 2-3 weeks and I can report what was wrong.
Got the phone back today. No idea what they did, no detailed description only "reset of program module SL4". Anyways, phone is working, I didn't have to pay anything, so all is good!:angel:
Hi everyone!
4 days ago i washed my phone for about 10 seconds, phone worked normally. After 1 hour i saw water went into both front and back camera. I got out all flaps and after some hours cameras were functional again. After even more hours buttons started to act weird. Sometimes power button wasn't working, sometimes volume up was acting like power button and so on. I tried to restart the phone, sometimes it went into safe mode(probably volume button was pressed by itself). Finally I couldn't start the phone at all(perhaps the power button stopped working at all).
After that i calmed down and put my phone into rice(hoping that would absorb water if any). After 24 hours i had no luck. When i had connected my phone to computer, the led was red, phone vibrated 3 times and then again and again.
Next step was to open the phone( removing the back with a hairdryer), took out the battery and trying to dry the phone with hairdryer. Still no succes. When connecting to PC and start flashtool, my phone wasn't recognised. I installed Sony Update Service (SUS) and then when i connected my phone i heard that sound you often hear when connecting a new device to an USB port. Now my phone is seen by flashtool, but it's always in fastbootmode. I even flashed CWM and it worked.
The problem is that it seems volume up is pressed always so i can't enter in flashmode to flash 4.4.2, it always goes into fastboot.
When on battery the phone is dead at all. Still when i try to charge the phone, it starts, displays Sony logo then shows that it's charging (at first that battery was empty but after 2 hours it got full charged). If i press power button it shutdown.
To resume, when on battery nothing happens( the battery could be dead). When plugged to wall charger the phone starts charging( so battery could work). Power button does nothing at all when on battery, but works when phone is charging or when connected to PC in fastboot.
If anyone had any idea what I could do I would be very appreciative. If you have any questions don't hesitate to ask me.Thank you very much for your support!
bavarezul13 said:
Hi everyone!
4 days ago i washed my phone for about 10 seconds, phone worked normally. After 1 hour i saw water went into both front and back camera. I got out all flaps and after some hours cameras were functional again. After even more hours buttons started to act weird. Sometimes power button wasn't working, sometimes volume up was acting like power button and so on. I tried to restart the phone, sometimes it went into safe mode(probably volume button was pressed by itself). Finally I couldn't start the phone at all(perhaps the power button stopped working at all).
After that i calmed down and put my phone into rice(hoping that would absorb water if any). After 24 hours i had no luck. When i had connected my phone to computer, the led was red, phone vibrated 3 times and then again and again.
Next step was to open the phone( removing the back with a hairdryer), took out the battery and trying to dry the phone with hairdryer. Still no succes. When connecting to PC and start flashtool, my phone wasn't recognised. I installed Sony Update Service (SUS) and then when i connected my phone i heard that sound you often hear when connecting a new device to an USB port. Now my phone is seen by flashtool, but it's always in fastbootmode. I even flashed CWM and it worked.
The problem is that it seems volume up is pressed always so i can't enter in flashmode to flash 4.4.2, it always goes into fastboot.
When on battery the phone is dead at all. Still when i try to charge the phone, it starts, displays Sony logo then shows that it's charging (at first that battery was empty but after 2 hours it got full charged). If i press power button it shutdown.
To resume, when on battery nothing happens( the battery could be dead). When plugged to wall charger the phone starts charging( so battery could work). Power button does nothing at all when on battery, but works when phone is charging or when connected to PC in fastboot.
If anyone had any idea what I could do I would be very appreciative. If you have any questions don't hesitate to ask me.Thank you very much for your support!
Click to expand...
Click to collapse
Did you connect phone holding volume down key or are you connecting usb after that pressing volume down key
androidtweaker1 said:
Did you connect phone holding volume down key or are you connecting usb after that pressing volume down key
Click to expand...
Click to collapse
Even if i down't press anything, just connect the phone to usb, led is blue, that means it's in fastboot mode...so i think volume up is stuck, pressed.
bavarezul13 said:
Even if i down't press anything, just connect the phone to usb, led is blue, that means it's in fastboot mode...so i think volume up is stuck, pressed.
Click to expand...
Click to collapse
or the volume pcb might have shorted
Please remember this for the rest of your life:
When you notice that water has went into your device.... TURN IT THE F OFF AND LET TIT DRY...
Using it while it's wet from the inside is really bad.
Update Guys
Today I've replaced that yellow connector that contains power, vol up and vol down buttons. I managed to enter flashmode and flashed the newest official rom .233. Power button and vol up work like charm, vol down is dead.
The problem is that my phone is stuck on safe mode(probably because vol down is stuck). I want to know if there's any solution to get rid of this safe mode. I read somewhere that changes can be made to the kernel so that vol down will be disabled for ever. If you know any ROM, any mod, whatever that disables the vol down button i'll appreciate your help.
Hello. This morning I've turned off the alarm, turned on WIFI and went back to sleep. I can't tell for sure, but I think the battery was low. During the next 2 hours I checked the time several times. I don't remember accepting any OTA. Eventually I got up, tried to check the time and the phone was off. I tried to turn it on, no effect. No matter how many times and for how long I pressed and held the power button, the green LED only flashed for a split second and that's all. I plugged in the charger, and the LED stayed lit -but- there was this barely noticeable flickering. Charged it for about 30, 60, 120 minutes, didn't start plugged or unplugged. I went to work, 8 hours later (phone was unplugged) I tried to turn it on again, this time the LED doesn't even flash, but when charging there is no flickering. No combination of buttons works. Windows doesn't find the device, neither does RSD.
I've never done anything 'custom' to the phone. The last change I made was setting the alarm to turn off by shaking (yesterday, never used this option before).
Is it dead?
Try taking SD card out and holding Vol down and then Power for 20 secs, then let go of Power,
Already done that, nothing. No matter how long I charge it now, after unplugging and pressing power button the LED doesn't even flash. Could it be a battery problem (before its death, it would last for a day)? Is there any way of recovering my data without buying a new one?
Try opening and disconnect battery for a bit.
I'll do that as a last resort, on weekend maybe since I don't have the tools with me. Any other clues?
Nobody knows how to help me?
I'm going to make a factory cable. Will this alone allow me to recover the data? Or if I'll be able to flash the phone, can I recover the data afterwards?
Also, I'm not sure if I understand correctly: does the factory cable recharge the battery or not? Is there a way to recharge it when removed from the phone?
Try to use medfield unbrick script. If You have only green led it seems to be bootloader error so this script should bring Your phone to life or Your phone has broken emmc and You can start looking for a new logic board. Good luck.
I've installed the drivers, but Windows and XFSTK don't recognize my device at all. Factory cable also didn't help. I liked my phone very much. :angel:
Did You enter medfield mode using combination with camera button??
By a combination you mean holding the camera button and connecting the phone to a pc? I tried that.
Disassembe Your phone, pull out battery, push power button for a 10 sec, plug in battery, push camera button and connect USB. If it wont help You I don't see any hope for Your phone.
Well, new option to try is a new hope. I'll try that on the weekend. Could you please be more specific:
1. Pull out the battery.
2. Press the power button and wait 10 seconds.
3. Insert the battery: should I be still holding the power button at this moment?
4. Press the camera button.
5. Plug in the usb cable (factory? regular?) - should I be still holding the power and camera buttons?
Battery trick is only to discharge capacitors. Sometimes even phone is dead it can turn on in some strange mode and then You can't boot it to flash. Thats why You need to pull out battery, push power for a few sec to completely discharge motherboard and just release this button. After that You can just plug in battery and continue normal unbrick process - so hold camera button only and connect regular usb cable.
You can also try reset option instead of pulling battery out. To do that do not disassemble Your phone but just plug in regular USB, when phone starts (green led) hold power and vol- until green led goes off and then quickly start holding only camera button.
I have no more ideas.
Ok, I've tried everything. Nothing brought my phone back to life.
Thanks for all your help.
Dear XDA Members,
My oneplus 3T turned off automatically after the phone became unresponsive for a minute. The battery was about 20-25%.
I connected the charger as i thought battery might have drained. The charger's temperature was rising and so was my handsets. But I am unable to turn it on. It wont even connect to PC
I have tried power button long press.
Power Button + volume down.
Volume up. Every combo that has been mentioned over the internet but I am still unable to turn it on.
Kindly help and recommend some steps or remedies in detail to solve my problem.
Thanks in advance.
Hi. Try to follow the unbrick tutorial in https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Hopefully you'll be able to get it detected by a pc and get it revived.
Best of luck.
machinegunmir said:
I am unable to turn it on. It wont even connect to PC
Click to expand...
Click to collapse
FYI, the phone has to be powered on (at least to bootloader-fastboot mode) in order to connect in any way. So of course, it will never connect if the phone can't power on.
redpoint73 said:
FYI, the phone has to be powered on (at least to bootloader-fastboot mode) in order to connect in any way. So of course, it will never connect if the phone can't power on.
Click to expand...
Click to collapse
Hello, I have same problem with my One plus 3t, did you find a solution? I know it's years late but pls reply!
I'll try and keep this short.
Plugged in my 5a yesterday day like I always do, got the charge sound, opened up instagram and the phone hard froze shortly there after and the screen shut off.
I unplug the device and it won't power up or restart with just the power button. Plug it into the computer and get qdloader 9008 driver loading.
Unplug and wait again.
Finally got a boot with volume plus power buttons, Now I get an android logo being operated on with something like "no command input" or something.
Powered the phone down and this time it came back up like nothing happened, so I blew it off as a fluke. Phone works perfectly the rest of the day.
Shoot to that night, I plug it in the same charger again the same issues repeat.
Only this time the phone does not come back. Screen acts dead, same qdloader driver will load when plugged in.
Searching around it seems I've bricked the device somehow with this cable charger combo I've had for years.
So I'm here to confirm my fears or luck out and find there's a fix maybe.
Disturbed_One said:
I'll try and keep this short.
Plugged in my 5a yesterday day like I always do, got the charge sound, opened up instagram and the phone hard froze shortly there after and the screen shut off.
I unplug the device and it won't power up or restart with just the power button. Plug it into the computer and get qdloader 9008 driver loading.
Unplug and wait again.
Finally got a boot with volume plus power buttons, Now I get an android logo being operated on with something like "no command input" or something.
Powered the phone down and this time it came back up like nothing happened, so I blew it off as a fluke. Phone works perfectly the rest of the day.
Shoot to that night, I plug it in the same charger again the same issues repeat.
Only this time the phone does not come back. Screen acts dead, same qdloader driver will load when plugged in.
Searching around it seems I've bricked the device somehow with this cable charger combo I've had for years.
So I'm here to confirm my fears or luck out and find there's a fix maybe.
Click to expand...
Click to collapse
check here might be what happened https://forum.xda-developers.com/t/...he-pixel-5a-bsod-issue.4557811/#post-88199019
BTK19 said:
check here might be what happened https://forum.xda-developers.com/t/...he-pixel-5a-bsod-issue.4557811/#post-88199019
Click to expand...
Click to collapse
Thanks for the post. I did contact google and I might be eligible for the special warranty repair. Fingers crossed, it will be a couple week wait.
Was hoping for a fix I could accomplish myself, but as long as Im not out any money this works too.