Hi,
I really hope somebody can help. I've bricked my P20 Pro and looking for a solution...
Quick rundown of how I got here and relevant info:
Original model CLT-L09 8.1.0.103 (C782)
Rebranded with FunkyHuawei to CLT-L29
Was running firmware CLT-L29 8.1.0.110 (C782)
Updated to CLT-L29 8.1.0.120a (C432) using @Atarii 's method from this post https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 (booted fine, no issues except wasn't passing safetynet and build number was messed up when viewed in settings) so I wasn't happy and decided to flash back to CLT-L29 8.1.0.110 (C782) using the same method.
When I issued the adb commands
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_data_public.zip" >> /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_all_hw.zip" >> /cache/recovery/command
I did so as 3 separate commands - pressing enter after each echo command, instead of copy/pasting the whole command as one.
Rebooted to recovery and the update was verified and started to flash but phone went blank mid-way through and hasn't powered on since. Device was at 96% battery when started flashing.
I now can't boot to fastboot, eRecovery, system, recovery... nothing.
I have successfully installed drivers so that when I connect the phone with USB it is recognized as HUAWEI USB COM 1.0 in device manager.
I do believe there is some way to recover from this. I have tried FunkyHuawei unbrick tool but that requires to be booted in fastboot. Tried DC Phoenix but the board software for P20 pro is not available.
If anyone knows anything that might help me out of this situation I'd be eternally grateful.
Thanks!
Currently, there is no way to recover. That might change in the future.
No commercial unbricking tools support the P20 Pro yet. Even if you were to find board software (for example Mate 10 board software is compatible enough to get you into fastboot, most likely) you won't be able to flash everything you need to, as the tools to do so aren't yet compatible.
I think your two choices are to wait until P20 support can be added to commercial unbricking tools, or to try having the device repaired/replaced under warranty, as it will be diagnosed as a hardware problem by Huawei (and it very well may be, if it just shut off without warning like that.)
I did exactly the same thing. Nothing working at all. Not even fastboot. Will the service center be able to fix this?
I can't offer any help here, but would like to know what might have caused this. Do you think it was because you attempted to downgrade the firmware?
I believe so. I was on 120 and tried to install 107 as 120 did not report model correctly
I've read somewhere here on XDA threads you can anything with your p20 pro but no downgrade at least for right now.
djlukas1983 said:
I've read somewhere here on XDA threads you can anything with your p20 pro but no downgrade at least for right now.
Click to expand...
Click to collapse
Probably going by this guy's experience!
Good Luck Original Poster!
FWIW and I know it's of no help but SafetyNet Test always fails with new f/w but usually it gets approved within a few days. When I upgraded from 103 to 110 it took 5 days.
have u fixed?? i have same problem it doesn't show any image but I have p20
Elizage2015 said:
have u fixed?? i have same problem it doesn't show any image but I have p20
Click to expand...
Click to collapse
He got it swayed out pal, if you've done the same thing I'd say so the same, if the device is powerless then it'll just get swapped out for a new one.
dladz said:
He got it swayed out pal, if you've done the same thing I'd say so the same, if the device is powerless then it'll just get swapped out for a new one.
Click to expand...
Click to collapse
is there any chance to power on device?? (
Elizage2015 said:
is there any chance to power on device?? (
Click to expand...
Click to collapse
I couldn't power mine on at all. As @duraaraa said unbricking tools aren't supporting P20 Pro yet. I took mine back to my provider and they replaced the main board after they couldn't fix it
Elizage2015 said:
is there any chance to power on device?? (
Click to expand...
Click to collapse
Just get it swapped, if you can't see the device neither can they, straight swap
No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085
My p20 pro was in Huawei usb 1.0 mode. With the dc-unlocker tool I got into fastboot and retrieved my phone.
MichelKastro said:
My p20 pro was in Huawei usb 1.0 mode. With the dc-unlocker tool I got into fastboot and retrieved my phone.
Click to expand...
Click to collapse
can you tell wich steps you followed to retrieve your phone?
Related
Dear All!
Here is one desperate guy turning to you because I see from some XDA posts, that you know about twrp and Huawei devices quite something.
At first, I don't want to waste your time. If you can help me, I will be happy to compensate it because I'm quite serious on this (and desperate as well).
I'm a beginner on Android rooting world, and in a nutshell, I enjoy just putting my Android device to the limits and enjoy using them to the fullest.
Bad thing, that I sometimes take too much risk and this time it ended with a (Soft) bricked phone.
The phone is from a rental company, that is why I'm so stressed to get it back and going.
So getting to the point:
Device: Huawei P10, VTR-L29C432B123
(C432, as I understand, is European version and it's important here)
Current state: Device is unlocked, rooted and with TWRP 3.1.1. (TWRP installed by this post https://forum.xda-developers.com/p10/development/testers-twrp-t3585256 and rooted by this post https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946)
After installing TWRP and Rooting device I happily enjoyed using it for some time but
things went wrong when I started to try to put back Stock rom. (+ unroot and lock the device as well).
I tried multiple posts on the internet and didn't succeed. Unfortunately, FLashify and alike apps didn't work (or crashed after installing) on my P10, therefore, I turned to TWRP.
At first, I tried to install stock firmware downloaded from Firmware Finder but TWRP put out error:
E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip '/external_sd/dload-draft/update.zip
Then I tried some other ways and turned to wipe section. Deleted Catches and data and then also system. This I believe f-ed things up and (of course) I could not boot anymore.
Can you instruct me on installing Stock rom for my device and get it back and running?
Thank you very much and please let me know if some more info is necessary!
@paratox @OldDroid @XePeleato @Dejan Kruljac Guys, if you could take a look on this and give me a direction - I would be enormously thankful!
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
What does it mean to debrand a device?
It helped. Jeezh
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Jaunpetrovics said:
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Click to expand...
Click to collapse
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
M1chiel said:
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
Click to expand...
Click to collapse
He's right. My P10 had no os installed no recovery and the huawei e recovery wasnt working, this thing will fix the most bricked of phones. 10/10 would brick again. :good:
Would my phone work ?
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
edit : I have relocked my bootloader which leaves me no TWRP
Would this also work for me (VTR-L09)
I bought the phone from Vodafone Australia and I am stuck in erecovery right now, when I try to update through the dload using a FAT32 sd card the update.app won't even copy onto the sd card as it is larger than 4GB. When I try to do it using an sd card formatted to NTFS it stops at 5% and states "software install failed!"
Please help me on what to do... any help would be appreciated
Huawei P20 lite dead
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
YulmarRSA said:
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
Click to expand...
Click to collapse
I can assume that your memory is out of order.
I understood correctly, when you turn on the cubes? You did not flash board firmware?
Hello
This Testpoint Mate 10 PRO ( model
BLA-AL00 BLA-L09 BLA-L29 BLA-A09
Looks like a testpoint!
Hello brother. if im not wrong this Phone using HiSilocon CPU... does it have TP too?.. if it does what tool will i use to flash ?
Best Regards
pretty much all huawei hisilicon devices have a testpoint somewhere, most are documented if not just connect the device and short the most likely points until you find it. as for the best tool its probably currently DCphoenix
HI all,
I have a bricked Mate 10 pro (yeah boohoo), but I think it might be fixed using testpoint method and DC phoenix. However I'm unfamiliar with how the testpoint proedure works and some guidance is much appreciated. I have opened my device, found the tespoint and soldered some wire to it so I can ground it easily. But... I don't know what to expect and what should (or shouldn't) happen.
Can someone please explain:
- first, do I need special drivers?
- at what point should I ground the testpoint:
- with or without batery connected?
- with or without USB cable connected?
- while powered off, while in fastboot mode or while in erecovery? Any other mode is not working on my device, so no system, just fastboot or erecovery
- should I just ground it briefly and then release or keep grounded during the whole process?
So far I haven't had any luck getting DC Phoenix to recognise the device as in forced upgrade mode. Any help is much appreciated, as the DC unlocker crew haven't offered any help at all...
Rgds,
David
Unbrick BLA-A09
Can a Huawei Mate 10 Pro BLA-A09 US version be unbricked by using the test point method? I looked everywhere but only found the method for other versions. May someone guide me to the right direction. I attempted to research through the DC unlocker site as some of the forums refer to this site but from what I can see it only shows the other versions to be compatible. I also need a guide on how to do this process and were to locate the needed files thanks.
pacoe said:
Can a Huawei Mate 10 Pro BLA-A09 US version be unbricked by using the test point method? I looked everywhere but only found the method for other versions. May someone guide me to the right direction. I attempted to research through the DC unlocker site as some of the forums refer to this site but from what I can see it only shows the other versions to be compatible. I also need a guide on how to do this process and were to locate the needed files thanks.
Click to expand...
Click to collapse
If DC Phoenix has the bootloader files required for A09, then sure. But I don't know if they do nor do I have an account to login to check.
So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.
Kakoda said:
So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.
Click to expand...
Click to collapse
You're the same guy from reddit who was told your friend flashed the wrong version of EMUI 10
Read this thread carefully
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639
Your problem got solved?
Kakoda said:
So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.
Click to expand...
Click to collapse
Hey did your problem got solved ?
Would be great if you could leave me some information too, due I'm facing a similar problem
It would be great if you could leave some information
Cheers
Binban88 said:
Hey did your problem got solved ?
Would be great if you could leave me some information too, due I'm facing a similar problem
It would be great if you could leave some information
Cheers
Click to expand...
Click to collapse
Hi m8,
What's your actual build number and cust? For how to find out in case you don't know for sure, check my post - https://forum.xda-developers.com/showpost.php?p=81887785&postcount=418
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Hi m8,
What's your actual build number and cust? For how to find out in case you don't know for sure, check my post - https://forum.xda-developers.com/showpost.php?p=81887785&postcount=418
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
Hi There,
I have the same problem. I did flash it with a wrong version. I ran that command here is my build number:
PCT-L29 9.0.1.169(C636E1R2P1)
I cannot find anyway to fix this.
Update: Thank you for the reply. That is the first problem that there is no free version. The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version to the sd one?
Matt_honor said:
Hi There,
I have the same problem. I did flash it with a wrong version. I ran that command here is my build number:
PCT-L29 9.0.1.169(C636E1R2P1)
I cannot find anyway to fix this.
Click to expand...
Click to collapse
Hi m8,
Did you flashed a wrong version cust of EMUI 10 on your Honor View 20 device?
Later edit - i've found the dload firmware for your device (EMUI 10) which is needed to be used to revive your device, but it's a paid one and i don't have an account in order to download it
PCT-L29D 10.0.0.179(C636E3R4P3)_Firmware_EMUI10.0.0_05015PVU
Sent from my HUAWEI VOG-L29 using XDA Labs
Thank you for the reply. Unfortunately , I flashed it with C434 and I was not aware of it that it can brick my phone. All the blogs I looked into, they were all mentioning the PCT-L29 not the specific version.
That is the first problem that there is no free version. Is there any other website that I can request to download this version?
The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version into the sd one?
Another question that my version is C636E1R2P1 and the one you provided is C636E3R4P3. They have different regions of E1R2P1 and E3R4P3. Does that create any issue?
Matt_honor1 said:
Thank you for the reply. Unfortunately , I flashed it with C434 and I was not aware of it that it can brick my phone. All the blogs I looked into, they were all mentioning the PCT-L29 not the specific version.
That is the first problem that there is no free version. Is there any other website that I can request to download this version?
The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version into the sd one?
Another question that my version is C636E1R2P1 and the one you provided is C636E3R4P3. They have different regions of E1R2P1 and E3R4P3. Does that create any issue?
Click to expand...
Click to collapse
No, the dload firmware for your device isn't free on other site
You can't convert those files. What you've got is the update zip files that are used by HiSuite when there is an update available for you. But you can't use HiSuite, because you would need your device to be working...
No issues, if you managed to get that firmware, you can use it
Sent from my HUAWEI VOG-L29 using XDA Labs
Hello!
I wanted to install Google services on my HUAWEI P40 PRO C10E7R3P1. I decided to roll back the firmware via Hisuite.Proxy - I installed the els-lgrp6 firmware by mistake and got a soft brick. Now my phone is constantly restarting.
The phone turns on, works for a few seconds and reboots. The menu displays Imei - null. In the service menu (* # * # 2846579 # * # *) shows CUST - UNKNOWN. I also tried it via eBackup Wi-Fi, it gives an error. I Found service three-file firmware 10.1.0.114 (C432E8R5P2) dload via Recovery otg, which was recommended for 4pda, also gives an error. Through FASTBOOT and hisuite.proxy, I cannot find the files I need for the c10 region. More precisely, I found only PRELOAD els-n29-preload 10.1.0.1 (c10R6) on the FIRMWARE FINDER TO HUAWEI website and nowhere can I find the CUST C10 file.
I tried to install c432 (ELS-N29-CUSTC4321B6 (10. 1.0.6) and ELS-N29-PRELOAD 10. 1.0.1 (C432R6)), it gives an error during installation.
Please help me find a way
Hello bro, I can unbrick your phone, {Mod edit}
KINGZ_ said:
Hello!
I wanted to install Google services on my HUAWEI P40 PRO C10E7R3P1. I decided to roll back the firmware via Hisuite.Proxy - I installed the els-lgrp6 firmware by mistake and got a soft brick. Now my phone is constantly restarting.
The phone turns on, works for a few seconds and reboots. The menu displays Imei - null. In the service menu (* # * # 2846579 # * # *) shows CUST - UNKNOWN. I also tried it via eBackup Wi-Fi, it gives an error. I Found service three-file firmware 10.1.0.114 (C432E8R5P2) dload via Recovery otg, which was recommended for 4pda, also gives an error. Through FASTBOOT and hisuite.proxy, I cannot find the files I need for the c10 region. More precisely, I found only PRELOAD els-n29-preload 10.1.0.1 (c10R6) on the FIRMWARE FINDER TO HUAWEI website and nowhere can I find the CUST C10 file.
I tried to install c432 (ELS-N29-CUSTC4321B6 (10. 1.0.6) and ELS-N29-PRELOAD 10. 1.0.1 (C432R6)), it gives an error during installation.
Please help me find a way
Click to expand...
Click to collapse
Hi! did you find a solution?? I'm in the same annoying situation
ElMery said:
Hi! did you find a solution?? I'm in the same annoying situation
Click to expand...
Click to collapse
No, I never found a solution to this problem. I gave it to the warranty service center for repair, where the motherboard was replaced.
KINGZ_ said:
No, I never found a solution to this problem. I gave it to the warranty service center for repair, where the motherboard was replaced.
Click to expand...
Click to collapse
Did you pay or it was under warranty?
ElMery said:
Did you pay or it was under warranty?
Click to expand...
Click to collapse
no, I didn't pay anything.
KINGZ_ said:
no, I didn't pay anything.
Click to expand...
Click to collapse
Last question: how much did it take to be done?
Tomorrow I'll go to the service center.
ElMery said:
Last question: how much did it take to be done?
Tomorrow I'll go to the service center.
Click to expand...
Click to collapse
did it for 5 days.
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
KKYASIR said:
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
Click to expand...
Click to collapse
i have the same problem, any solution ?
saleemz said:
i have the same problem, any solution ?
Click to expand...
Click to collapse
i took it to Huawei service center and they changed the motherboard (under warranty) in 6 hours and returned my P40 pro. .. this is the only solution if you have installed wrong OS via Hisuit proxy ..
saleemz said:
i have the same problem, any solution ?
Click to expand...
Click to collapse
we messed with the motherboard while installing wrong OS via HiSuit proxy, take your mobile to Huawei Customer Service center to change the motherboard. this is the only solution ..
Nick said:
Hello bro, I can unbrick your phone, Give me a message on facebook profile: (Shunior Max).
Click to expand...
Click to collapse
I had the exact same problem with my Huawei P40 Pro. I have sent the phone to huawei and they said they have to replace the main board. Yesterday I contacted Nick and he really managed to repair my phone via teamviewer. I can highly recommend him. No it is fully working again.
Nick said:
Hello bro, I can unbrick your phone, {Mod edit}
Click to expand...
Click to collapse
Hello. How do you unbrick it? is it remotely like anydesk or teamviewer? Do I need any kind of special cables? How much does it cost?
Sorry for so many questions
I am in a terrible dead end as I cannot recover my phone. I accidantelly put the wrong firmware to my p40 pro and now it restarts after a couple off minutes not giving me the time to install Hisuite and try another firmware. I also tried the eRecovery but I got the "Get package info failed" message. Also I tried through USB to update the phone but it gets stuck at 5%. I hope someone can help me. Thanks
Sorry to hear but the only way to get it working again is going do Huawei service center for motherboard replacement.
lillosnx said:
I am in a terrible dead end as I cannot recover my phone. I accidantelly put the wrong firmware to my p40 pro and now it restarts after a couple off minutes not giving me the time to install Hisuite and try another firmware. I also tried the eRecovery but I got the "Get package info failed" message. Also I tried through USB to update the phone but it gets stuck at 5%. I hope someone can help me. Thanks
Click to expand...
Click to collapse
There are paying tools I have access to, like DC's ones, which can allow you to force flash back the right packages from 'USB update mode'.
- I could fix you up remotly for a donation, PM me.
It seems to me you 'just' installed the wrong LGRPx base package for your device variant.
Happen to my device once and huawei service center replace the main board under warranty.
Try hard reset
lillosnx said:
I am in a terrible dead end as I cannot recover my phone. I accidantelly put the wrong firmware to my p40 pro and now it restarts after a couple off minutes not giving me the time to install Hisuite and try another firmware. I also tried the eRecovery but I got the "Get package info failed" message. Also I tried through USB to update the phone but it gets stuck at 5%. I hope someone can help me. Thanks
Click to expand...
Click to collapse
You can search for the model and follow the steps on how to reset it I mean the hard reset.
happened to me and the only solution is to visit Huawei customer care center for motherboard replacement.
happened to me also, flashed LGRP6 instead of LGRP4, i fixed it remotely with someone who have access to some paid tools
oslo83 said:
There are paying tools I have access to, like DC's ones, which can allow you to force flash back the right packages from 'USB update mode'.
- I could fix you up remotly for a donation, PM me.
It seems to me you 'just' installed the wrong LGRPx base package for your device variant.
Click to expand...
Click to collapse
I did not managed with DC & octoplus tools.
It complains about verlist.
---------- Post added at 12:38 ---------- Previous post was at 12:38 ----------
saleemz said:
happened to me also, flashed LGRP6 instead of LGRP4, i fixed it remotely with someone who have access to some paid tools
Click to expand...
Click to collapse
Any idea what were the tools involved ?
A huawei cant be dead just installing wrong firmware.
There is no need to replace motherboard.
Can be recovered using paid tools
So far, it seems to me paying tools are failing on LGRP6 builds and on P40Pro+ devices without using physical testpoint mode.
When software testpoint mode just works fine on LGRP4 builds and P40Pro device.
Mrt dongle work fine
oslo83 said:
So far, it seems to me paying tools are failing on LGRP6 builds and on P40Pro+ devices without using physical testpoint mode.
When software testpoint mode just works fine on LGRP4 builds and P40Pro device.
Click to expand...
Click to collapse
For anyone with a bricked phone, oslo83 helped me fix my bricked p40 pro, over remote connection. I downgraded to the wrong firmware, and it would restart after one min in android. Phone is perfect now, and Google services works great. Cheers.