Related
(Sorry,I'm a Chinese,and my English wasn't very good.)I have flash a wrong bootloader(international i9000'bootloader) on my m130k.Now,my m130k can't enter download mode at all!
One of my friends told me that I can fix my m130k with JTAG.
Sadly,We can't find the JTAG's fix file(16mb/64mb) It can be extract from another m130k(It must working well).
Now,I need this file to fix my m130k.
help!anyone can help me???
Thanks for your help!
I have uploaded all the bootloader files here.(include boot.bin,sbl.bin,pit¶m.lfs)
if you need morefiles ,please PM me,I will contact you soon.Thanks.
I'm looking for bootloader files for m130k
Hello.
Maybe you could build JTAG compatible Boot if you have Full Firmware with Bootloader files?
Btw... For me it is very hard to find Firmware for m130k.
Please, can you give Link to Firmware?
Thanx in advance.
Best Regards
adfree said:
Hello.
Maybe you could build JTAG compatible Boot if you have Full Firmware with Bootloader files?
Btw... For me it is very hard to find Firmware for m130k.
Please, can you give Link to Firmware?
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
Thanks!!! I have the bootloader files for m130k.
They are boot.bin&sbl.bin
i will upload it later ,best wishes~
bootloader files for m130k
I have upload all the bootloader files for m130k here.
Thanks for your help!
@ cjy200612373
Thank you very much.
Please give me few hours for research. Then I will post or write you PM.
I'll do my best.
Best Regards
HI All!
Thanks for uploading bootloaders,
but i need PIT and param.lfs too.
I upload utils for downloading this files from working
m130k.
Work with rooted telephones.
only run RUN and post bootfiles.7z after working
I will upload the pit.rfs later
wait a moment
ok, but params.lfs also very importan, because boot and sbl secured(e-fused).
I'm studying in school.I will upload the pit and param.lfs files when I get home in the afternoon.
wait a moment....... I will upload them in 4 hours when I get home
pit¶m.lfs
oleg_k said:
ok, but params.lfs also very importan, because boot and sbl secured(e-fused).
Click to expand...
Click to collapse
I have upload pit¶m.lfs here.
Thanks for your help.
As I can see e-fused at end of file...
If I'm not totally wrong this means OTP area...
If I'm wrong correct me.
So in theory not all Data can be overwritten...
Also theory, as I can not test self.
No M130K nor compatible JTAG, I have only Segger J-Link and only Qualcomm experiences...
MSM6250a
Anyway. If M130K is possible to attach with compatible JTAG then in theory you could dump damaged Boot area.
First 4 MB I think...
Also I know. There are ways possible. To dump without JTAG from working handset... NOT sure if M130K support this...
I will try to ask...
Best Regards
Thanks everyone
Thanks to adfree.
oleg_k have downloaded the full m130k files that i dump from a working m130k.
Now,I'm waiting for him.
thanks everyone~I must remember you forever!
Sorry. I have no progress.
On other forum no answer...
Best Regards
cjy200612373 said:
Thanks to adfree.
oleg_k have downloaded the full m130k files that i dump from a working m130k.
Now,I'm waiting for him.
thanks everyone~I must remember you forever!
Click to expand...
Click to collapse
i have repaired M130K allready its same as T959v and my hand jtag work with it but now phone can go download mode i havent firmware for flashing phone i need full firmware with pda csc boot etc.
Thanks
http://forum.xda-developers.com/showpost.php?p=12160948&postcount=7
@ Desperato
Thanx for info.
For Firmware follow Link, if not clear enough, read next Post.
http://forum.xda-developers.com/showpost.php?p=12161813&postcount=8
Please. If success. Can you give feedback.
Thanx in advance.
Best Regards
adfree said:
http://forum.xda-developers.com/showpost.php?p=12160948&postcount=7
@ Desperato
Thanx for info.
For Firmware follow Link, if not clear enough, read next Post.
http://forum.xda-developers.com/showpost.php?p=12161813&postcount=8
Please. If success. Can you give feedback.
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
there is all firmware without boot i have try it allready not help still stuck at samsung logo i need get boot.bin and sbl.bin include firmware for fix my hand phone totaly.
B.R
...boot.bin and sbl.bin...
Click to expand...
Click to collapse
Only to be sure. These 2 files attached 2 times in this Thread... for M130K.
They are not working?
Best Regards
adfree said:
Only to be sure. These 2 files attached 2 times in this Thread... for M130K.
They are not working?
Best Regards
Click to expand...
Click to collapse
not work %100 phone died again i tested
Thank you very much.
So I can't help.
No Full Firmware with all files found.
No M130K to investigate self.
I've tried to ask on other boards for help. But no answers...
Sorry.
Best Regards
Does anyone have the stock .img files for the T-Mobile version? I would appreciate a link to them.
Thanks!
twillet50 said:
Does anyone have the stock .img files for the T-Mobile version? I would appreciate a link to them.
Thanks!
Click to expand...
Click to collapse
Did you search AT ALL? Dumbass questions like yours are the reason the devs have begun to leave xda because everyone wants the info spoon fed to them
Firstly, congratulations to geohot!! Along with the rest of you, I've been waiting so long for this and I'm overjoyed at this breakthrough.
I have a problem however - I bricked my phone about a month ago and I need the pit file to revive it. Now that root has been achieved, it should be possible to get the pit. So now I'm humbly asking for anyone who can get the G900A pit file to please share it with me.
Many thanks.
Long live geohot and XDA!!!!
INSTRUCTIONS:
Step 1:
Root - all credit and props to geohot!!
http://forum.xda-developers.com/showthread.php?t=2783157
http://towelroot.com/
Step 2:
Extract PIT - credit samersh72 for the instructions.
See post #2
http://forum.xda-developers.com/showthread.php?t=2737448
I don't mind helping, however I'm a bit of a newb. What's the PIT file, and do you have a link for an easy way to extract it?
LoSt180 said:
I don't mind helping, however I'm a bit of a newb. What's the PIT file, and do you have a link for an easy way to extract it?
Click to expand...
Click to collapse
Thank you!
My bad, I should really have included the references initially.
Step 1:
Root - all credit and props to geohot!!
http://forum.xda-developers.com/showthread.php?t=2783157
http://towelroot.com/
Step 2:
Extract PIT - credit samersh72 for the instructions.
See post #2
http://forum.xda-developers.com/showthread.php?t=2737448
Thanks a million.
Btw - mine is the 16GB G900A. Yours must be the same for me to use the pit.
Replied to the thread you linked to in case anybody else needs it.
LoSt180 said:
Replied to the thread you linked to in case anybody else needs it.
Click to expand...
Click to collapse
Thanks man! Very much appreciated!!!
LoSt180 said:
Replied to the thread you linked to in case anybody else needs it.
Click to expand...
Click to collapse
What firmware version do you have? If you have the right one (G900AUCU2AND3) do you mind dropping the entire thing for me and for future use?
pcidiot said:
What firmware version do you have? If you have the right one (G900AUCU2AND3) do you mind dropping the entire thing for me and for future use?
Click to expand...
Click to collapse
I do have that firmware version, but I'm not sure what you're asking for. Are you looking for the whole ROM? Is the flash back to stock thread the wrong version (I haven't looked)?
LoSt180 said:
I do have that firmware version, but I'm not sure what you're asking for. Are you looking for the whole ROM? Is the flash back to stock thread the wrong version (I haven't looked)?
Click to expand...
Click to collapse
No, problem there is a work around I' am back working and on the firm ware I was looking for. Thanks
I need the PIT too!
Hey man were you able to fix it? I am in the same error as you and have tried anything and thinking maybe the PIT file might help me.
Were you able to obtain it? If so, would you mind sharing it with me?
Hi I was just curious if anyone else with Boost Mobile has gotten this update yet and if so if there where anyway they could maybe make and upload a zip file for download that contains the backup files that can be extracted to the twrp folder and restored in recovery? Thanks
Ubiquitous_22 said:
Hi I was just curious if anyone else with Boost Mobile has gotten this update yet and if so if there where anyway they could maybe make and upload a zip file for download that contains the backup files that can be extracted to the twrp folder and restored in recovery? Thanks
Click to expand...
Click to collapse
There's really no reason to install any update if you're using a rom that's not stock because it's just going to revert back to 1.46 since the roms were made at that time. I downloaded and installed the 1.48 update and as soon as I put my other rom and kernel back I went to check and sure enough it reverted back to the 1.46 so you're just gonna be wasting your time.
Thanks for replying. That's the thing though I am actually using the stock rom. At the moment I have the 1.48 update installed with @pattyboi:) latest kernal.
Ubiquitous_22 said:
Thanks for replying. That's the thing though I am actually using the stock rom. At the moment I have the 1.48 update installed with @pattyboi:) latest kernal.
Click to expand...
Click to collapse
If you really want the update just flash your stock kernel and then flash your stock recovery and then lock your bootloader and then the update will go through.
That's what I would prefer to do if I were able to but I'm actually stuck without a computer atm. I was just curious to see if anyone else had reserved the update and installed it and could possibly throw me a zip file with twrp backup files like someone had done previously with 1.48.
Ubiquitous_22 said:
That's what I would prefer to do if I were able to but I'm actually stuck without a computer atm. I was just curious to see if anyone else had reserved the update and installed it and could possibly throw me a zip file with twrp backup files like someone had done previously with 1.48.
Click to expand...
Click to collapse
I'm on a totally different rom than stock so unfortunately I can't do it but maybe someone else that reads this later will help you out with it.
Thank you any how bro. I appreciate the support most definitely.
Do you actually mind if I pm you about another question I had if it's not a bother.
Ubiquitous_22 said:
Thank you any how bro. I appreciate the support most definitely.
Do you actually mind if I pm you about another question I had if it's not a bother.
Click to expand...
Click to collapse
You're welcome and yeah go ahead.
---------- Post added at 06:06 AM ---------- Previous post was at 05:52 AM ----------
Ubiquitous_22 said:
Thank you any how bro. I appreciate the support most definitely.
Do you actually mind if I pm you about another question I had if it's not a bother.
Click to expand...
Click to collapse
I have to go to work now because it's past 6am so I may not be able to answer the private message question right away but I'll try to get to it as soon as I can.
Cool no worries get to it whenever you get to it.
Ubiquitous_22 said:
Cool no worries get to it whenever you get to it.
Click to expand...
Click to collapse
Okay but where's the private message because I don't have one yet lol.
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Wow... lets me see...
thanks
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks
[email protected] said:
Thank you!
I have a 5.1.1 version, can I ODIN this version right away, or should I gradually update versions up to this one?
Also, I am not rooted. Will this trip KNOX?
Thanks
Click to expand...
Click to collapse
Flash directly to this version and NO it will not trip KNOX
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!
Serrone said:
I don't know how gracious the other bloggers are but I want to tell you how much I appreciate this Odin update. I am really grateful. Again thanks!
Click to expand...
Click to collapse
Hope the ODIN works.. Much appreciated!
Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?
rafsi said:
Hope the ODIN works.. Much appreciated!
Click to expand...
Click to collapse
Worked perfectly fine. Again a big thank you.
Help Me!!
John97xj said:
This is Newest version of 6.0.1.
Is binary number 4! Once updated you can never go back to older software
Hope this helps you.
mega.nz/#F!Xd0TXJhK!3RZu8v2P3rqloIffqraIKg
If you need help with anythin message on skype: hjkjohn
Click to expand...
Click to collapse
Hello Friend,
if I upgrade to downgrade G925AUCU3CPD6 I can do if something goes wrong?
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
bunnycool said:
Flash directly to this version and NO it will not trip KNOX
Click to expand...
Click to collapse
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks
[email protected] said:
---------- Post added at 12:17 PM ---------- Previous post was at 12:16 PM ----------
Great.
Just to make sure, I'm suppose to flash all of the files in the folder, not just the AP, right?
Thanks
Click to expand...
Click to collapse
Yes
Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk
vicente.gonzalez said:
Can you explain how to update with odin, im new to all this
Enviado desde mi Be Touch 3 mediante Tapatalk
Click to expand...
Click to collapse
Hello Friend,
It's really simple , before , you must install kies; in ODIN just place the files :
AP = AP_XXXXXXX
BL = BL_XXXXXXX
CP = CP_XXXXXXX
CSC = CSC_XXXXXXX
Enter in Download Mode. Turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds; in ODIN Click Start, without touching anything more.
phone says: secure check fail : (pit)
when flashing ( if i flash an older version it says that the device is 4 and the binary is 3 )
Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!
rapidrayo said:
Can you upload the files to other server? Because I cant donwload the big file (1.7GB) beacuase the free limit its like 1.1GB and the file doesnt donwload complete, I will really appreciate, thanks!
Click to expand...
Click to collapse
Wait me a second. I'm uploading all files to Google Drive
Link Google Drive: https://drive.google.com/file/d/0B1CkUUq9QV3AMWE3bDNCTFFRQzg/view?usp=sharing
Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help
Alexjab said:
Dear friend , is it possible to use the version you are providing to upgrade from 5.0.1 ? Or it s needed to upgrade first from 5.0.1 to 5.1.1? Thanks for your help
Click to expand...
Click to collapse
you can directly upgrade to 6.0.1 by using the provided files, no need of incremental updates.