My moto x4 Project fi variant is not booting up after I flashed TWRP. The phone keeps booting up to TWRP and asks me to pick slot A or slot B, and then reboot. But, no matter which slot I use, the phone doesn't start. Does anyone know a solution to this problem?
Related
Hi everyone, I'm having a weird issue since this morning and could not solve it yet, maybe someone can help me.
Basically I tried to dirty flash the new nightly of CM12.1 using TWRP 2.8.6.0 and it got stuck. After rebooting the device I could not get to twrp anymore (strangely) and then I tried to reflash it (two different versions) with no success.
With my device being in this state (without booting into OS and with no recovery access) I had to download the stock 5.0.2 for the XT1068 and flash it using fastboot. It can now boot up normally into stock ROM and restored the stock recovery, but now any custom recovery I flash it does not work. I had two different results on two versions of twrp:
2.8.5.0 - After flashing it and trying to access it the device shows the "unlocked bootloader" screen and then reboots itself and goes to the ROM without even getting into TWRP.
2.8.6.0 - After flashing it and trying to access it the device goes to the "unlocked bootloader" screen and freezes there. I have then to hold the power button for a long time (about 1,5 min) and then the device boots the stock ROM.
Anyone can give any idea of what I can do? I even tried to lock and unlock the bootloader again, flash CWM, flash TWRP and nothing. At least the device is booting, so it is not a urgency, but any help is appreciated!
----------------------------
I got it, a stupid reason for all issues I was having. The issue was with my router, that was set to use a internal firewall which was screwing up a lot of my downloads, and the ROM and TWRP files just got into this issue.
After reconfiguring my router everything worked out, which make me fell stupid for not thinking about this before hahaha, but at least it is fixed
Thanks for everyone who took a time to read this and sorry for any inconvenience!
Using my Moto Maker XT1060 (Verizon variant). I had unlocked bootloader some time ago using Sunshine and was previously using the most up-to-date VZW 4.4.4 firmware.
I got sick of waiting for VZW to release the Lollipop update so I figured I would try CM 12.1. Here's what I did:
Download the latest Dev Edition recovery firmware from Motorola (VZW_212.55.26.ghost_verizon.Verizon.en.US.tgz)
Flashed it to the device using fastboot successfully for a stable and clean base
Booted up and used the phone no problem
Downloaded the CM12.1 Nightly .zip file
Downloaded the latest TWRP and flashed it
Booted into recovery no problem
Used TWRP to do a factory reset
Installed CM .zip
Restart the phone normally
The phone was able to load CM and get to the Startup Wizard, but was caught in a soft bootloop (no rebooting from bootloader and buzzing, but the system would crash and the CM boot animation would come up, then repeat). I noticed this was happening at about the same time that the "Location" icon was appearing in the notification tray, so I figured it was an issue with GPS. I rebooted and cleared modemst1 and modemst2 using fastboot, but this yielded no results.
At that point I figured "to hell with it" and flashed the Motorola recovery firmware back onto it using fastboot. Now the damn thing is stuck in a soft bootloop and won't get past "Preparing device..."
No idea what happened, I have never experienced anything like this before (fully flashed 6 other devices at this point). Any help is appreciated as of all the devices I have worked with, this one is actually my personal phone. Figures it would be the one to get screwed up somehow...
Did you format/wipe /data or perform a factory reset before booting into CM?
Sent from my Nexus 6
Hello everyone.
I had a N9208 , dual sim that I rooted.
After that , the phone ended in boot looping.
When I tried to flash a rom through ODIN, it wasn't responding as it was getting stuck at NAND WRITE.
I took it to someone who repairs phones.
After a lot of tries, he somehow managed to make it boot.
(He used the blue box to fix it)
Now the radio of the phone supports Dual Function but it has the Rom of 920c .
The problem is :
1)Upgrade does not work and it says that the phone has been tampered
2)I am receiving a mesg that says Unathorised actions have been made to your phone all the time
3)I cannot set up TWRP or Philz installed as ODIN again ghets stuck in NAND WRITE
4)Battery is Super draining.
What I want is ideally put the old rom back and set up TWRP in order to flash a new rom.
But again ODIN does not cooperates.
Any ideas of what happened or any help?
Thanks
I had a N9208 , dual sim that I rooted.
After that , the phone ended in boot looping.
When I tried to flash a rom through ODIN, it wasn't responding as it was getting stuck at NAND WRITE.
I took it to someone who repairs phones.
After a lot of tries, he somehow managed to make it boot.
(He used the blue box to fix it)
Now the radio of the phone supports Dual Function but it has the Rom of 920c .
The problem is :
1)Upgrade does not work and it says that the phone has been tampered
2)I am receiving a mesg that says Unathorised actions have been made to your phone all the time
3)I cannot set up TWRP or Philz installed as ODIN again ghets stuck in NAND WRITE
4)Battery is Super draining.
What I want is ideally put the old rom back and set up TWRP in order to flash a new rom.
But again ODIN does not cooperates.
Any ideas of what happened or any help?
Hi there,
Yesterday I was trying to copy a movie on the internal memory of my device. The device froze and when I forced restart the phone, it just got stuck on the bootloop screen. The phone shows the Moto Logo and then vibrates and black screen and boots again.
I tried to go into recovery but when I press recover, it just reboots. Let me mention that bootloader is locked.
When I took it to a mobile shop, the person told me he tried to connect it to the computer. Maybe he was trying to flash it or unlock the bootloader, but he said that the phone did not detect on the computer.
Can anyone please help me?
If possible, some detailed steps on how to proceed.
(This is the Indian Dual Sim version - XT 1068. Not rooted, no custom rom, running on 4.4.4 KitKat)
Can anyone help with any links which will start the phone again. Fastboot etc r alien words to me so any detailed instructions will be helpful.
Thanks