Database Develop

[Help] Huawei P9 Command not allowed

Hello. I recently got a P9 (model EVA-AL00). Since I lived in US, I figured I might debrand the phone.
I followed this guide to unlock my bootloader and root :http://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701 and this guide to help me debrand: http://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045.
I unlocked the bootloader, install twrp and root with no problem. However, after I changed the oeminfo my phone reboot and I lost root, twrp, and the bootloader is locked again. Now when I tried to enter recovery mode with cmd, I get Command not allowed error. Furthermore, my phone is now only showing EVA in the model number. I am also getting a message saying my device has failed verification at startup. I am officially stuck.
Any help or pointers would be appreciated. Thank you for your time.

Get a full stock rom for your model,unzip it into the dload folder on your external sd and then hold power and both volume buttons to reflash the stock rom.

Yo dude did you fix it?

fix it?
same problem ((((((crying:

Sorry for the late reply but that did help me to fix my problem

Huawei honor 8 software issue URGENT NEED HELP

So I decided to root my huawei honor 8 and I unlocked bootloader, installed twrp and flashed root and it didn't work so I searched forums and flashed something that put my honor 8 in bootloop. Then I downloaded latest update and put in on sd card and updated phone from sd. So when I was in stock recovery I did factory reset and then my phone booted up without half of pre-installed apps, keyboard (I installed keyboard from sd card), Bluetooth and usb debugging are turning off automaticly when I turn them on and when I tried to fix it oem unlocking got turned to off and its greyed so I can not install twrp to try to fix it from there (bootloader is still unlocked I still get message when I turn on my phone) and I can't recover my files from HiSuite. If anyone knows how could I fix this I would really appriciate it. (I'am not native english speaker so I'am sorry for my bad grammar)

Semi working PRA-LX1C432

Hi !
I bought in January the nice P8 Lite 2017 and received a PRA-LX1C432 (dual sim europe no carrier).
It was with Android 7.0 and EMUI 5.0 and i wanted to root it.
I did it well, and was with the firmware PRA-LXA1C432B182 in stock and rooted with the tuto from this thread
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
and uninstalled TWRP to put back stock recovery.
Later, I wanted to unroot my phone, and that's where things went wrong. I tried to do it with the superSU option and after a hard reset it was working and not rooted, but i'd still have the message "this phone can't be trust" so i tried to relock the bootloader and it did hard reset the phone again and now, i'm stuck with a phone that can send sms or go through the internet with LTE, but can't access fm, camera, google music, nfc is going on and off, calls don't work, etc... In dev options, Allow OEM unlock is greyed and I can't change anything. Phone is recognized by computer and I can acces memory of the phone.
I can hard reset it won't change, i ca also accessFastboot, or recovery or eRecovery, but in Fastboot mode it says "PHONE Unlock FRP Lock" and from my computer i can't do anything : if i try to flash twrp with fastboot command, i have the message "FAILED remote the command is not allowed", if i try to lock/unlock/relock bootloader it says "FAILED remote root type is risk".
Clearly, I don't know what to do. I'm used with rooting/unrooting smartphones from different brands (Samsung, LG, Sony, Huawei...), even though i'm far from being a master, and using Fastboot/ADB commands, but... I don't know.
If someone has any idea, I'm taking. I'm thinking about dload method but, of cooourse, I do NOT have a sdcard, so it's the last thing i would have tried from all i have seen on xda and elsewhere.
Thanks for reading and taking time to answer and help me, and sorry for not perfect english, i'm french but trying my best !

Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.

Fr0nK said:
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Click to expand...
Click to collapse
I can't, it says that it can not get package infos from server. :/

MrCrumble34 said:
I can't, it says that it can not get package infos from server. :/
Click to expand...
Click to collapse
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.

Fr0nK said:
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Click to expand...
Click to collapse
TWRP is not installed, and I can't flash it in any way. Fastboot says "FAILED (remote : command not allowed)" if I try flashing recovery or system or anything. It also says "FAILED (remote : root type is risk) if I try to lock/unlock/relock the bootloader.

Ok, I'm actually trying something. I plugged the phone into my computer, and HiSuite told there was an update available for my phone, so I just clicked on it. It's doing right now, I will edit my post after it has finished (for good or bad).
EDIT : Ok, si it did work ! My phone is now on PRA-LX1C432B194, everything is working, not rooted. I relocked the bootloader with Fastboot, the command did work (guess I can root it again if I need now). But I think I'll leave it like that ^^'
Allow OEM unlock isn't greyed anymore, I came back to the original state of my phone but with an update not (yet) available in my country, no more "Device can't be trusted" message. Like if nothing had ever happened (expect it will be written PHONE Relocked).
This phone is really sensitive, haha^^
But as anyway I made it
Thanks anyway for trying to help !

Huawei P10 Half root, Bootloader unlocked FRP lock, OEM greyed out, Erecovery loop

My Huawei P10,
My phone the Huawei p10 VTR-L09 the rooting proces has gone wrong.
I now have a half root on my phone. 50%-root
I have stock recovery on my phone but this does not work properly anymore becuase failed every time.
Factory reset does not work because loop.
My Bootloader is unlocked and FRP lock.
In fastboot mode all commands are blocked because i have no remote option.
This is becuase FRP-Lock.
OEM option is greyed out.
Dload method I have tried but that does not work.
And got my bootloader code true Huawei so you would say that I can also Relock my bootloader again, but this does not work either.
I have been looking and trying at it for about 5 months now and try to find new facts or technology so that I can repair my phone and use it again optimally.
My phone works but it is not 100%.
So I have no super user rights on my phone.
I would like to hear from people who know those errors how to repair them.
Or is there only one option left for me and that is the DC- unlocker
sorry for my lack of English, Peter.

Is there no solution for my problem huawei p10?
My Huawei P10,
My phone the Huawei p10 VTR-L09 the rooting proces has gone wrong.
I now have a half root on my phone. 50%-root
I have stock recovery on my phone but this does not work properly anymore becuase failed every time.
Factory reset does not work because loop.
My Bootloader is unlocked and FRP lock.
In fastboot mode all commands are blocked because i have no remote option.
This is becuase FRP-Lock.
OEM option is greyed out.
Dload method I have tried but that does not work.
And got my bootloader code true Huawei so you would say that I can also Relock my bootloader again, but this does not work either.
I have been looking and trying at it for about 5 months now and try to find new facts or technology so that I can repair my phone and use it again optimally.
My phone works but it is not 100%.
So I have no super user rights on my phone.
I would like to hear from people who know those errors how to repair them.
Or is there only one option left for me and that is the DC- unlocker
sorry for my lack of English, Peter.
I need help Xda is there no new solution for my own fold ****top problem that annoy me everyday

I don't understand text properly .
Can you boot your phone or not?

Did you try to boot into eRecovery (not normal recovery) by connecting the phone to USB and boot as you would do it for recovery?
Does this work and are you able to do a factory reset there?
Did you try to download the latest firmware via OTA and install it?
Which version is installed?

P10 problems
Jannomag said:
Did you try to boot into eRecovery (not normal recovery) by connecting the phone to USB and boot as you would do it for recovery?
Does this work and are you able to do a factory reset there?
Did you try to download the latest firmware via OTA and install it?
Which version is installed?
Click to expand...
Click to collapse
VTR-L09C4321b185
in e-recovery I come in without problems but he lingers there every time then I get a red exclamation mark. factory reset that does not work because I have frp lock and this is why I can not install new software.(I think..) OEM lock Greyed-out I run android 7.0 and emui 5.1 thank you

The factory reset should work even the OEM Lock is greyed out.
Did you try to relock your bootloader with both commands:
fastboot oem lock UNLOCKCODE
fastboot oem relock UNLOCKCODE
If this doesn't work, you can use Firmware-Finder to upgrade to Oreo, B185 is old.
Within the app you can check firmware access, if it's accessible, update through DNS or Proxy. There are many tutorials for this.

-don´t even think to relock your bootloader it will brick your phone when you are in this state
-try to use HWOTA to reflash the whole B185 firmware
-i don´t know how you rooted your phone so i cannot help more

Did you try this from part "force upgrade"? It use dload method
https://huaweiadvices.com/flash-stock-firmware-huawei-honor-phones/

Huawei p10
Hi. I want to thank everyone for responding to my problem with my phone. And Jannomag thanks for your response yes I have tried all these commands in fastboot. I also have an original bootloader code. This way does not work for me in fastboot because it indicates all the time that no remote commands can be given. Furthermore, the half root (rooting gone bad) of my phone. Apk files when installed says that I have no Root and other APK files say that I have full root on my phone. I also can not use supersu and busybox because I have no full root to my phone. I've already done the dload method a couple of times, but I doubt that everything went very well. Nocia, I am going to try your method again and then I will let you know if this has succeeded or not. I have stock recovery and this wont work. I have no custom recovery installed. But it is a nice idea that I have some assistance from you nice people that keeps me motivated so that my phone will work once again ...keep you posted..peter (sorry for my bad Englisch)

make full unroot if you rooted with supersu (with nobody with sense will do in 2018 since we have magisk)

P10 problems
Hi,
I have tried the dload method. But I do not manage because SD card does not accept large files. SD card is in fat32 and formatting to NTSF will not work. exfat format has succeeded but I do not get large files. I have tried downloading it via phone directly to SD card and that has succeeded but then unpacking gives problems because the file is too large for SD card. New SD card purchased 16GB but same problems. A week and a half after work I started working on this and even DISKPART and other related softwares, but none of them gives good news. And Dallas-CZ I have done root with TWRP and custom GAPPS or it is called something like this but the latter is package of assembled apks. But this root has never gone well. I'm curious about your reactions and ideas thanks, Peter

just leave it.
1-you don't even know how you rooted yout phone.
2-you don't know how to put 4.6 GB file to your SD card. ( NTFS will of course work).
Sell the phone for spare parts it will save you a lot of pain.

P10 problems
i have tryed to root root with twrp and flash SuperSU-.zip file on the phone. Here went wrong because I do not have full root. Still not. I have tried so much I have tried everything i know. If you can tell me what the problem is why I can not get a 5GB file on my SD Card. If I know what I'm doing wrong then I continue with the dload method. If you say that it should be easy to put 4GB on fat32 SD card please tell me? Is it the SD card that is too small, should I just get a new one and 1 of 64 GB with ntfs? I would rather have my 16GB card work, but I can not format fat32 to NTSF on my SD-card. I am here also because I do not know what to do and need information about the correct way. Please help;;;;

You didn´t write what supersu have you flashed.
1 -have you tried to uninstall supersu in the supersu app?
2-have you tried to uninstal supersu in twrp with this method?
3-just format your 16gb sd card to ntfs. Put the right files on the sd card and follow the tutorial.

i dont think that the dload method still works.

Try the HurUpdater method...
Hi, try this method here:
HurUpdater: https://forum.xda-developers.com/hon...overy-t3769279
I had more or less the same problems and different boot, OS, a.s.o. problems.
Soemtimes I was in a loop, didnt had a working OS, other times I could get any ADB-connect.
The above way solved my problems and I could install different ROMs after I followed the method.
Hope this helps
SB

P10 problems
DallasCZ said:
You didn´t write what supersu have you flashed.
1 -have you tried to uninstall supersu in the supersu app?
2-have you tried to uninstal supersu in twrp with this method?
3-just format your 16gb sd card to ntfs. Put the right files on the sd card and follow the tutorial.
Click to expand...
Click to collapse
DallasCZ,
thank you for your reaction. I've made a mess of it and I have to confess that I do not know which Supersu version I used to flash my phone. Unroot by apk supersu I have tried but this indicates that SU binary needs to be updated so I can not. What do you mean by putting the right files on my SD card? I can not get the SD card to NTFS. I have tried all kinds of methods to format my sd card from 16 GB to NTFS but I can not. Have even bought a new card of 16 GB but this one so that it fails to format to NTFS. I can not get custom recovery installed and I now run stock recovery. twrp installed by root access does not work because I do not have root full access. And twrp at fastboot does not work because I have FRP lock and bootloader is unlocked. thank you in advance

Superblond said:
Hi, try this method here:
HurUpdater: https://forum.xda-developers.com/hon...overy-t3769279
I had more or less the same problems and different boot, OS, a.s.o. problems.
Soemtimes I was in a loop, didnt had a working OS, other times I could get any ADB-connect.
The above way solved my problems and I could install different ROMs after I followed the method.
Hope this helps
SB
Click to expand...
Click to collapse
superblond your link doesnt work for me will you please post it aigain ..thank you

P10 problems
TbiTw said:
i dont think that the dload method still works.
Click to expand...
Click to collapse
Hi .. as long as I do not get my SD card formatted to NTFS, I will not succeed .. What is the problem why that card does not want NTFS?

Link to HURUpdater Post
tamino161 said:
superblond your link doesnt work for me will you please post it aigain ..thank you
Click to expand...
Click to collapse
Sorry M8,
here is a proper link and the title is ' [Tool] [HuRUpdater] [0.4] [Flash official firmware in recovery '. (I think you need to be loged in...)
I still have the files on my hd for my Huawei P10 VTR-09, that gave me a unbricked & fully functional phone with EMUI 8.0, OS 8.0 ver. 8.0.0.382(C432) again... if you need them I could upload them for you.

Problems to uninstall // Pass to decrypt needed

Hello,
Due to some other problems that I am having with the phone I thought of uninstalling magisk and unrooting the phone (redmi note 4)
At the beginning I thought of uninstalling it direclty from the magisk manager. After doing it, the phone entered in bootloop. I solved it falshing the stock recovery (I had twrp installed) and onced I booted the system I saw that magisk was not uninstalled yet.
So after reading some articles, I found that flashing the magisk apk (by changing name and extension to f.i. uninstall.zip) should do the thing. So I proceed to flash twrp again and to flash the uninstall packet.
The problem is that now, everytime and enter the recovery I am asked for a password that I didn't set. I guess it has to do with the encryption option provided in magisk manager. However I tried default password, password, the pin i set to unlbock the phone, the pin corresponding to the pattern that i set to unblock the phone, and none of those worked.
So it seems I cannot uninstall magisk.
Any ideas for a workaround?

xdaforo said:
Hello,
Due to some other problems that I am having with the phone I thought of uninstalling magisk and unrooting the phone (redmi note 4)
At the beginning I thought of uninstalling it direclty from the magisk manager. After doing it, the phone entered in bootloop. I solved it falshing the stock recovery (I had twrp installed) and onced I booted the system I saw that magisk was not uninstalled yet.
So after reading some articles, I found that flashing the magisk apk (by changing name and extension to f.i. uninstall.zip) should do the thing. So I proceed to flash twrp again and to flash the uninstall packet.
The problem is that now, everytime and enter the recovery I am asked for a password that I didn't set. I guess it has to do with the encryption option provided in magisk manager. However I tried default password, password, the pin i set to unlbock the phone, the pin corresponding to the patron that i set to unblock the phone, and none of those worked.
So it seems I cannot uninstall magisk.
Any ideas for a workaround?
Click to expand...
Click to collapse
You obviously messed something up I'm not sure if I understood you well, but did you try to set new PIN in the system and then enter it in TWRP?

Lord Sithek said:
You obviously messed something up I'm not sure if I understood you well, but did you try to set new PIN in the system and then enter it in TWRP?
Click to expand...
Click to collapse
No. Originally I've always had a pattern to unblock the phone. And when I entered in twrp with idea of uninstalling magisk I found out I was asked for a pass. So after that I remove pattern -still pass was asked in twrp- and so I tried setting a pin to unblock -but it didn't work either in twrp.