Database Develop

Deleted

Deleted and left this forum!

Stock Recovery Link Please?

Xpredator 20 said:
Stock Recovery Link Please?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1rEfLdrJbhKaERBMjR3WnRQaVk/view?usp=sharing

Thanks Man.

What's the difference between locked and unlocked bootloader?

You can do more stuff with an unlocked boot loader like rooting your device. Warranty will be void though that's why some prefer to lock it again before they take it to a service center

Thank you for tutorial. I have two questions. If I relock phone, will the warranty be valid? Will I be able to receive OTA updates with relocked bootloader?

Relock failed
message:
Failed (remote:root type is risk)
any idea?

harrymcqueen said:
message:
Failed (remote:root type is risk)
any idea?
Click to expand...
Click to collapse
Follow all steps on first post!

sokkoban said:
Follow all steps on first post!
Click to expand...
Click to collapse
1. If you rooted device- make full unroot! - I unrooted using superuser app "full unroot"
2. If you have TWRP remove it and reverse to original recovery!!! Done
3. Downgrade to C432B052 (Dual SIM / Europe) - Where can i download this old Version?
4. Install last original firmware via OTA update!!! (In my case is C432B170 (Europe)
5. Connect device on PC
Just found C432B052 in your blog - so next try now.

harrymcqueen said:
1. If you rooted device- make full unroot! - I unrooted using superuser app "full unroot"
2. If you have TWRP remove it and reverse to original recovery!!! Done
3. Downgrade to C432B052 (Dual SIM / Europe) - Where can i download this old Version?
4. Install last original firmware via OTA update!!! (In my case is C432B170 (Europe)
5. Connect device on PC
Click to expand...
Click to collapse
ALE-L21C432B052

sokkoban said:
ALE-L21C432B052
Click to expand...
Click to collapse
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
---------- Post added at 11:01 PM ---------- Previous post was at 10:56 PM ----------
harrymcqueen said:
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
Click to expand...
Click to collapse
...found the batch file, will try this!

harrymcqueen said:
Do i need to unpack *.rar and install this version using fastboot/adb mode? Sorry for asking soo many questions.
---------- Post added at 11:01 PM ---------- Previous post was at 10:56 PM ----------
...found the batch file, will try this!
Click to expand...
Click to collapse
Of course you need anrar and connect phone with PC then boot into fastboot and run bat file(FLASH-ALL.bat)
And a little hint. This adb fastboot install will be unbrick your phone. I reed for your problem

sokkoban said:
Of course you need anrar and connect phone with PC then boot into fastboot and run bat file(FLASH-ALL.bat)
Click to expand...
Click to collapse
Thank u for your patience. at least Phone boots again now with your sw installed!!!
So my main problem is solved.
:good:

harrymcqueen said:
Thank u for your patience. at least Phone boots again now with your sw installed!!!
So my main problem is solved.
:good:
Click to expand...
Click to collapse
Use this firmware when you bricked again your phone . This is universal method for unbrick

sokkoban said:
Use this firmware when you bricked again your phone . This is universal method for unbrick
Click to expand...
Click to collapse
I hope not to kill it once more
Have a good night!

will give it a try..

Thanks for the tutorial

Hi
Thaks for the tutorial...
Any idea how to change the Message from "Phone relock" to "Phone Lock" ? same before unlock...

Lost IMEI on NEM-L51 (actually an AL10 2Gb)

Hi,
I've lost my EMEI on my chineese NEM-L51 Honor 5C. I've the message NO SIM CAD INSERTED.
Can someone provide me a solution ?
Thanks

bdurren said:
Hi,
I've lost my EMEI on my chineese NEM-L51 Honor 5C. I've the message NO SIM CAD INSERTED.
Can someone provide me a solution ?
Thanks
Click to expand...
Click to collapse
How about factory reset or flashing full firmware via dload? Try once

bdurren said:
Hi,
I've lost my EMEI on my chineese NEM-L51 Honor 5C. I've the message NO SIM CAD INSERTED.
Can someone provide me a solution ?
Thanks
Click to expand...
Click to collapse
Try flashing the full firmware by dload method.

Shubho20 said:
Try flashing the full firmware by dload method.
Click to expand...
Click to collapse
I put a full AL10 2Gb update.zip on dload directory on an sdcard. Yes, I have discovered that's the hardware is an AL10 :-/
I did the *#*#2846579#*#* code on dialer, but I've get the "NO update file" message.
An idea ?

bdurren said:
I put a full AL10 2Gb update.zip on dload directory on an sdcard.
I did the *#*#2846579#*#* code on dialer, but I've get the "NO update file" message.
An idea ?
Click to expand...
Click to collapse
What are the files u got after extracting update.zip?

Shubho20 said:
What are the files u got after extracting update.zip?
Click to expand...
Click to collapse
META-INF (Directory)
UPDATE.APP
full_mainpkg.tag
I must extract the zip file ?

bdurren said:
META-INF (Directory)
UPDATE.APP
full_mainpkg.tag
I must extract the zip file ?
Click to expand...
Click to collapse
Ya, u need to extract update.app file. Then put update.app file in dload folder, and copy it in sdcard. Then u r good to go.:good:

Shubho20 said:
Ya, u need to extract update.app file. Then put update.app file in dload folder, and copy it in sdcard. Then u r good to go.:good:
Click to expand...
Click to collapse
Thx a lot. The update started. But infortunately, it doesn't match the version AL10 != L51
I think, I must:
- Unlock bootlader
- change Hardware Region
- Flash good rom for this hardware

bdurren said:
Thx a lot. The update started. But infortunately, it doesn't match the version AL10 != L51
I think, I must:
- Unlock bootlader
- change Hardware Region
- Flash good rom for this hardware
Click to expand...
Click to collapse
Download NEM-L51 stock rom. Or whichever ur region's rom is.

bdurren said:
I think, I must:
- Unlock bootlader
- change Hardware Region
- Flash good rom for this hardware
Click to expand...
Click to collapse
Yes, exactly.
-You unlock bootloader,
-flash correct Chinese TWRP into recovery2 with fastboot,
-flash Hardware Region zip with TWRP,
-flash correct ROM with 3 buttons.
That's what I did.

Sladenky said:
Yes, exactly.
-You unlock bootloader,
-flash correct Chinese TWRP into recovery2 with fastboot,
-flash Hardware Region zip with TWRP,
-flash correct ROM with 3 buttons.
That's what I did.
Click to expand...
Click to collapse
Hi! How did you unlock the bootloader? It needs IMEI and the Product ID from the device for the bootloader unlock code. But both of them are blank.
If I manage to unlock the bootloader and then flash TWRP, I think I could do the rest easily. But stuck at unlocking bootloader.

darkgizmo said:
Hi! How did you unlock the bootloader? It needs IMEI and the Product ID from the device for the bootloader unlock code. But both of them are blank.
Click to expand...
Click to collapse
I've unlocked bootloader prior to flashing the phone and written down the unlock code as it is needed after every 3-button flashing. Did you not write it down? If you did, you don't have to get the code again.
Anyway, the IMEI is written on the box as well as product ID.

darkgizmo said:
Hi! How did you unlock the bootloader? It needs IMEI and the Product ID from the device for the bootloader unlock code. But both of them are blank.
If I manage to unlock the bootloader and then flash TWRP, I think I could do the rest easily. But stuck at unlocking bootloader.
Click to expand...
Click to collapse
BOth IMEI and serial number is written on the back of the battery.
IF you have twrp installed you can just make a clean flash of stock ROM.zip through it.

miststudent2011 said:
BOth IMEI and serial number is written on the back of the battery.
IF you have twrp installed you can just make a clean flash of stock ROM.zip through it.
Click to expand...
Click to collapse
But these days mobiles have non removable batteries

gopinaidu77 said:
But these days mobiles have non removable batteries
Click to expand...
Click to collapse
Did I say to remove battery?
you can get them when you remove your back case.

miststudent2011 said:
Did I say to remove battery?
you can get them when you remove your back case.
Click to expand...
Click to collapse
, this is hard for noobs

gopinaidu77 said:
, this is hard for noobs
Click to expand...
Click to collapse
Bro no one is Noob they are at different stages of learning.
Some learn the hard way and some by the other way.
Those who learns by hard way gets more experience.

miststudent2011 said:
Bro no one is Noob they are at different stages of learning.
Some learn the hard way and some by the other way.
Those who learns by hard way gets more experience.
Click to expand...
Click to collapse
And more number of damaged phones

My solution
bdurren said:
Hi,
I've lost my EMEI on my chineese NEM-L51 Honor 5C. I've the message NO SIM CAD INSERTED.
Can someone provide me a solution ?
Thanks
Click to expand...
Click to collapse
Hello dude i was in the same situation and i have success with repair i will tell you in a short way what you need to do:
1. find TWRP wich work with your rom and flash as erecovery.
2. Change region to cn , flash this zip hw_CN_UL10.zip
3. Find this ROM NEM-UL10C00B153 and flash it with sdcard as normal upgrade *#*#2846579#*#* then Software Upgrade —> SDCard Upgrade
at this point you will have imei again. Now i decide to try to make eu again
4. find TWRP wich work with your rom and flash as erecovery. in my case twrp nemo 3.0.2.0 works
5. change region again flash this zip hw_EU.zip
6. flash NEM-L51C432B102 and you are done eu with sims
all this i do with unlocked bootloader
Sory i cant post links because of XDA restrictions
I do in this way because 3button Forced upgrade stop work when i change region.
My hpone is chinese version NEM-AL10 2GB
PS : dont do any updates if you do you will loose sim again . Disable autoupdates.

[BOOT]Stock boot.img Library

i Created this thread for the ease of Mate 9 user that are struggling in finding a stock boot.img for their Region n firmware build.
P/S - if i have missed out other or if you have other build to contribute kindly tag me or reply here.
Thanks In Advance.
Mate 9 Dual Sim (MHA-L29)
AL00
AL00B167
AL00B173
AL00B175
C185
C185B185
C432
C432B156
C432B175
C567
C567B167
C567B183 thanks to @dacre
C635
C635B170 thanks to @sashimiyarou
C636
C636B136
C636B158
Mate 9 Single Sim (MHA-L09)
BC69
L09BC69B110
C02
L09C02B129
C33
L09C33B136
C106
L09C106B160
C432
L09C432B138
L09C432B156
Mate 9 Pro (LON)
LON-AL00
C00B167
C00B173
C00B175
LON-L29
C185
C185B139
C185B156
C432
C432B139
C432B156
C636
C636B139
C636B156
C721
C721B124
C721B138

Great idea. I should create one for mate 8 . :good:

MHA-L29(B)C635B170-BOOT.img

how to flash this to phone? thnks

donlonte said:
how to flash this to phone? thnks
Click to expand...
Click to collapse
Via TWRP
Install -> Install Image -> stockboot.img -> boot type
Via ADB
fastboot flash boot stockboot.img

Mate 9 no os
Hello my phone just keep going to erecovery but I try download lastest version nothing will download says error. I tried twrp but how does you flash os on device.

donlonte said:
Hello my phone just keep going to erecovery but I try download lastest version nothing will download says error. I tried twrp but how does you flash os on device.
Click to expand...
Click to collapse
This isn't the whole OS. This is just the boot.img. If you are unable to boot into anything but eRecovery and TWRP, you will likely need to flash back the stock recovery for your device. eRecovery will then be able to salvage your OS.
I don't wanna be "that guy," but it sounds like you really are in over your head. You should not do things on your phone especially a Huawei if you do not fully understand what you are doing. Huaweis are notoriously easy to softbrick and potentially full brick.
---------- Post added at 12:13 AM ---------- Previous post was at 12:02 AM ----------
-----------------
C567B183

Thank you
Thanks for replying So how would I flash the stock boot img back on my phone?

Where can I find the stock recovery associated with this boot image? I'm on c636b158. I tried to Google but the only result was this thread here
Sent from my MHA-L29 using Tapatalk

I know this is for the mate, but I'm needing a stock boot.img for the Honor 8, L04 B360 any ideas/help?

eddmecha said:
i Created this thread for the ease of Mate 9 user that are struggling in finding a stock boot.img for their Region n firmware build.
P/S - if i have missed out other or if you have other build to contribute kindly tag me or reply here.
Thanks In Advance.
C567
C567B167
C567B183 thanks to @dacre
Click to expand...
Click to collapse
Folks, I was tearing my hair out looking for 567 stock 183.
Thank you eddmecha and dacre. Thank you.
Hopefully folks help with newer rev boot images. Thank you.

Looking for C432B182
Hi there,
I'm looking for stock bootimage for MHA-L29C432B182 firmware. Anyone?
Regards,

Dioky said:
Hi there,
I'm looking for stock bootimage for MHA-L29C432B182 firmware. Anyone?
Regards,
Click to expand...
Click to collapse
https://mega.nz/#!VhlkmQbJ!sgq55_e6cf78VwxmKvUHD7f23aJnnWUwdOehft2Lpdk

Anyone able to help me with c567b138 image?

mfinlay04 said:
Anyone able to help me with c567b138 image?
Click to expand...
Click to collapse
Here you go: https://mega.nz/#!IxN1VaiT!NuPIEWWmRMF00QxIci6l_JbDiFn7vfaGNTAHB2nFgbA

boot image
Anyone able to help me with L09C432B182 image? please:angel:

setool3 said:
Anyone able to help me with L09C432B182 image? please:angel:
Click to expand...
Click to collapse
I actually uploaded this yesterday, but apparently I forgot to post it -.-
https://mega.nz/#!ZksxFTha!LTXWxzmWDXVqlFxMtQln-xLYBxyDovwPtWnz58CjiwQ

I need boot image for c185b181 plz...

golastic said:
I need boot image for c185b281 plz
Click to expand...
Click to collapse
MHA-L29C185B181?
Can't find B281.

Sorry Ante0 is rather c185b181 boot image i need ....i flashed c185b185 boot image but now resulted to boot loop either on erecovery or twrp.

[Request] PRA-LX1 C432 oeminfo

Thanks to ChinHon we have a Dual Sim C432 oeminfo partition backup!
Here it is: https://mega.nz/#F!0pEg0YJL!DOrYXQ8_9nZ5WvZhbBYBgg
This enables dual sim, but most likely you imei will be 000's on the second slot. Now we only need to find a single sim one.
-- Origianl post --
Hi,
In the quest to debrand the single sim version of this phone I could not find any oeminfo dumps. Is there someone with root wiling to dump it?
Thanks!
Edit: You can use the twrp backup function to do it or this application: https://forum.xda-developers.com/android/apps-games/app-partitions-backup-t3003599

i have root on pra-lx1 but i have dual sim, will it be okay for you ?
i don't have twrp...

harlock59 said:
i have root on pra-lx1 but i have dual sim, will it be okay for you ?
i don't have twrp...
Click to expand...
Click to collapse
Yes! It would be great! You can use this program to backup the oeminfo partition https://forum.xda-developers.com/android/apps-games/app-partitions-backup-t3003599 (no twrp required )
Edit: Zip the output file since it is quite large (64mb, but compresses really well)

here's the file https://mon-partage.fr/f/J8GGyO4O/
the file was already zipped by the app !

harlock59 said:
here's the file https://mon-partage.fr/f/J8GGyO4O/
Click to expand...
Click to collapse
Thanks! I will see if I can debrand the phone using this file.
Edit: Apparently your phone is branded to bytel (C530). So I cannot debrand using your backup, still thanks!

i opened the .img with hex edit but i didn't understand what it meant...
---------- Post added at 10:56 PM ---------- Previous post was at 10:55 PM ----------
bytel is Bouygues Telecom, indeed i got it from a carrier
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
why do you want to debrand it ?
---------- Post added at 11:00 PM ---------- Previous post was at 10:57 PM ----------
what if you just remove "bytel/fr" with an hex editor ?
there is also this oem info: 8 - MF B .HXL M x

I have done that with the vodafone one but I still cannot flash a standard rom.
The vodafone firmware doesn't let me change some configs and has a default wifi network that cannot be removed.
I'm on c432b118 using hacks, but some things are not working properly. Still the debranded rom is faster than the vodafone rom, that's the main reason to debrand the phone.

randhackr said:
Hi,
In the quest to debrand the single sim version of this phone I could not find any oeminfo dumps. Is there someone with root wiling to dump it?
Thanks!
Edit: You can use the twrp backup function to do it or this application: https://forum.xda-developers.com/android/apps-games/app-partitions-backup-t3003599
Click to expand...
Click to collapse
I would dump mine but i still have not been able to get my bootloader unlock code

It simply got code to 2 devices at once

randhackr said:
Thanks to ChinHon we have a Dual Sim C432 oeminfo partition backup!
Here it is: https://mega.nz/#F!0pEg0YJL!DOrYXQ8_9nZ5WvZhbBYBgg
This enables dual sim, but most likely you imei will be 000's on the second slot. Now we only need to find a single sim one.
-- Origianl post --
Hi,
In the quest to debrand the single sim version of this phone I could not find any oeminfo dumps. Is there someone with root wiling to dump it?
Thanks!
Edit: You can use the twrp backup function to do it or this application: https://forum.xda-developers.com/android/apps-games/app-partitions-backup-t3003599
Click to expand...
Click to collapse
Your welcome

ts gaming said:
Your welcome
Click to expand...
Click to collapse
What oeminfo is this? C432 single sim? Indeed it is! Thanks After flashing it I no longer have a dual sim phone.

randhackr said:
What oeminfo is this? C432 single sim? Indeed it is! Thanks After flashing it I no longer have a dual sim phone.
Click to expand...
Click to collapse
Can you help me debrand vodafone? All the steps

Nepa1 said:
Can you help me debrand vodafone? All the steps
Click to expand...
Click to collapse
I will give you only a general overview of the process.
First you need an unlocked bootloader, then you need root or a custom recovery.
You will need to use dd to write the oeminfo backup file in to your oeminfo partition. Be very careful with dd, you can easily brick your phone with it.
After that you must unlock the bootloader again (after changing the oeminfo partition it locks again).
After this you will need to flash a stock recovery using fastboot.
The final step is to use firmware finder to flash either B110 for the dual sim version or B115 for the single sim version.

Use dd?

randhackr said:
I will give you only a general overview of the process.
First you need an unlocked bootloader, then you need root or a custom recovery.
You will need to use dd to write the oeminfo backup file in to your oeminfo partition. Be very careful with dd, you can easily brick your phone with it.
After that you must unlock the bootloader again (after changing the oeminfo partition it locks again).
After this you will need to flash a stock recovery using fastboot.
The final step is to use firmware finder to flash either B110 for the dual sim version or B115 for the single sim version.
Click to expand...
Click to collapse
Thank you but this dd what is it?

randhackr said:
I will give you only a general overview of the process.
First you need an unlocked bootloader, then you need root or a custom recovery.
You will need to use dd to write the oeminfo backup file in to your oeminfo partition. Be very careful with dd, you can easily brick your phone with it.
After that you must unlock the bootloader again (after changing the oeminfo partition it locks again).
After this you will need to flash a stock recovery using fastboot.
The final step is to use firmware finder to flash either B110 for the dual sim version or B115 for the single sim version.
Click to expand...
Click to collapse
dd what is it?

Nepa1 said:
dd what is it?
Click to expand...
Click to collapse
dd is a command for copying partition (linux command of course)
Maybe you could search some info before doing this , just to learn more because like randhackr said, it's a dangerous command wich can save you, or kill you (ok not you loooooool but your phone)

ripp2003 said:
dd is a command for copying partition (linux command of course)
Maybe you could search some info before doing this , just to learn more because like randhackr said, it's a dangerous command wich can save you, or kill you (ok not you loooooool but your phone)
Click to expand...
Click to collapse
OK Thank you

randhackr said:
I will give you only a general overview of the process.
First you need an unlocked bootloader, then you need root or a custom recovery.
You will need to use dd to write the oeminfo backup file in to your oeminfo partition. Be very careful with dd, you can easily brick your phone with it.
After that you must unlock the bootloader again (after changing the oeminfo partition it locks again).
After this you will need to flash a stock recovery using fastboot.
The final step is to use firmware finder to flash either B110 for the dual sim version or B115 for the single sim version.
Click to expand...
Click to collapse
Done unlocking bootloader process
Installed twrp backup oeminfo vodafone saved on pc then changed
Oeminfo no brand and did oeminfo restore with twrp after with fastboot flash firmware b115 but nn start
English excuse

randhackr said:
I will give you only a general overview of the process.
First you need an unlocked bootloader, then you need root or a custom recovery.
You will need to use dd to write the oeminfo backup file in to your oeminfo partition. Be very careful with dd, you can easily brick your phone with it.
After that you must unlock the bootloader again (after changing the oeminfo partition it locks again).
After this you will need to flash a stock recovery using fastboot.
The final step is to use firmware finder to flash either B110 for the dual sim version or B115 for the single sim version.
Click to expand...
Click to collapse
How do I get a stock recovery image? And how do I use firmware finder? (please detail)
Thanks in advance.

Huawei P9 Lite (VNS-L31)

Hello
I got an Huawei P9 Lite (VNS-31) and it had a Vodafone Branding.
Original Software was VNS-L31C02B347.
I was trying to install the VNS-L31C432Bxx but it fails.
Then i Unlocket the Bootloader and Rooted the Phone.
My next try was the same i can't install the C432 on this Phone.
After that i try to install oeminfo from a custom after than the phone doesn't start to boot to the EMUI.
I tried to install a custom Frimware with DC Unlocker.....Finished but the phone have no OS.
At his momet i the Phoe is FPR unlocked and Bootloader unlocked
Tthe Internal Storage Shows 0 MM and Cust 495MB in TWRP
I have access to TWRP and to FastBoot.
What can i do to fix that and to install the C432 or for example CyanogenMod or LineageOS.
Thx

anita98558 said:
Hello
I got an Huawei P9 Lite (VNS-31) and it had a Vodafone Branding.
Original Software was VNS-L31C02B347.
I was trying to install the VNS-L31C432Bxx but it fails.
Then i Unlocket the Bootloader and Rooted the Phone.
My next try was the same i can't install the C432 on this Phone.
After that i try to install oeminfo from a custom after than the phone doesn't start to boot to the EMUI.
I tried to install a custom Frimware with DC Unlocker.....Finished but the phone have no OS.
At his momet i the Phoe is FPR unlocked and Bootloader unlocked
Tthe Internal Storage Shows 0 MM and Cust 495MB in TWRP
I have access to TWRP and to FastBoot.
What can i do to fix that and to install the C432 or for example CyanogenMod or LineageOS.
Thx
Click to expand...
Click to collapse
Hello dude,
so you want to REBRAND your phone..
You can do this but you need some files and a correct procedure...
First you need to use a working TWRP, so download and use 3.1.1-1 version...
Check DATA partition, it should be ext4, if not, convert it and format it.
To rebrand you need correct L31C432oem.zip single/dual sim file (depend on your phone)
and need a correct L31C432 single/dual sim firmware.
You have to use a correct procedure you can find here into xda, just search
how to rebrand... or.... take a look into my posts....
To flash a custom rom, just follow the steps suggested in each thread...
Let me know if you need particular help and if i can i will help you...
Cheers

Dadditz said:
Hello dude,
so you want to REBRAND your phone..
You can do this but you need some files and a correct procedure...
First you need to use a working TWRP, so download and use 3.1.1-1 version...
Check DATA partition, it should be ext4, if not, convert it and format it.
To rebrand you need correct L31C432oem.zip single/dual sim file (depend on your phone)
and need a correct L31C432 single/dual sim firmware.
You have to use a correct procedure you can find here into xda, just search
how to rebrand... or.... take a look into my posts....
To flash a custom rom, just follow the steps suggested in each thread...
Let me know if you need particular help and if i can i will help you...
Cheers
Click to expand...
Click to collapse
Thank you for your help.
twrp-3.1.1-0-venus installed and Internal Storage repaired !
How to find the files for Flashing ?!
I have single SIM.
I think i must Flash with twrp because i have no OS in this moment on this phone.
thx

anita98558 said:
Thank you for your help.
twrp-3.1.1-0-venus installed and Internal Storage repaired !
How to find the files for Flashing ?!
I have single SIM.
I think i must Flash with twrp because i have no OS in this moment on this phone.
thx
Click to expand...
Click to collapse
Hey, i am glad to help other users..
About twrp, i would use 3.1.1-1 by HassanMirza01, just to stay safe...
So download and install it from HERE.
Do your backups and delete all safeties first... (fingerprints/pattern/pin)
Visit THIS thread, post #15 that's literally the same files and procedure as yours.
Read carefully before do anything !!