Database Develop

EVA-L19C185 to EVA-L19C432

I think in change my P9 EVA-L19C185B385 to EVA-L19C432B386. This is possible? If is, how?
My P9 isn't rooted and have bootloader locked. And I don't want to make root or unlock my bootloader....
If this is possible, may I use dload method?
I've download both B386 files, update.zip and update_data_full_EVA-L19_hw_eu.zip, from FF.
Thanks and sorry for my bad english...

Gurx said:
I think in change my P9 EVA-L19C185B385 to EVA-L19C432B386. This is possible? If is, how?
My P9 isn't rooted and have bootloader locked. And I don't want to make root or unlock my bootloader....
If this is possible, may I use dload method?
I've download both B386 files, update.zip and update_data_full_EVA-L19_hw_eu.zip, from FF.
Thanks and sorry for my bad english...
Click to expand...
Click to collapse
impossible without root and unlock bootloader

rhodondendron said:
impossible without root and unlock bootloader
Click to expand...
Click to collapse
Ok. And if I make root and unlock bootloader, how I can do that?
Any link describing how?
Tks.

Gurx said:
Ok. And if I make root and unlock bootloader, how I can do that?
Any link describing how?
Tks.
Click to expand...
Click to collapse
I using this guide when I first try to debrand my phone
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
now, i prefer to install oeminfo through twrp. if you can manage to unlock bootloader and flash twrp, you can do debrand easily. you just need to find right oeminfo (for example l19c432/l19c185).

Need help Face Unlock with root

Hi,
I'm on last firmware with face unlock with bootlocker unlocked and root, and i'll try to configure face unlock and the phone says "Your facial features could not be identified.".
I think root block the face unlock.
Someone have perhaps a solution ?
Thanks

kakasupershow said:
Hi,
I'm on last firmware with face unlock with bootlocker unlocked and root, and i'll try to configure face unlock and the phone says "Your facial features could not be identified.".
I think root block the face unlock.
Someone have perhaps a solution ?
Thanks
Click to expand...
Click to collapse
Make sure you're in a well lit room, no direct sunlight behind you.
It works fine with root here.

kakasupershow said:
Hi,
I'm on last firmware with face unlock with bootlocker unlocked and root, and i'll try to configure face unlock and the phone says "Your facial features could not be identified.".
I think root block the face unlock.
Someone have perhaps a solution ?
Thanks
Click to expand...
Click to collapse
it happened to me the same thing is because you are installing the supersu, that starting with the 136 does not work with the face unlock, you have to install the magisk and that's the way it works for me
Enviado desde mi ALP-L09 mediante Tapatalk

Sergiocubano1 said:
it happened to me the same thing is because you are installing the supersu, that starting with the 136 does not work with the face unlock, you have to install the magisk and that's the way it works for me
Enviado desde mi ALP-L09 mediante Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, do you know how i can change from super su root to magisk because i don't want lose my data, and when i root with super su it erase my userdata partition.
Thanks

Lemme help:
If your bootloader is unlocked you can install Magisk without loosing your data (Do a backup anyway)
Restore your original ramdisk without root.
Download TWRP 0.7 with MTP and decryptsupport from here: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Download Magisk here: https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
Install TWRP as described in the post, as soon you are inside TWRP, upload Magisk from your PC and install that zip. That's it.
Worked on my BLA-L29, faceunlock persists.

ferretmc said:
Lemme help:
If your bootloader is unlocked you can install Magisk without loosing your data (Do a backup anyway)
DL TWRP 0.7 with MTP and decryptsupport from here: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Download Magisk here: https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
Install TWRP as described in the post, as soon you are inside TWRP, upload Magisk from your PC and install that zip. That's it.
Worked on my BLA-L29, faceunlock persists.
Click to expand...
Click to collapse
Not work for alp-l09
Enviado desde mi ALP-L09 mediante Tapatalk

how to lock bootloader

Hay mate, please ur advice how to lock bootloader again.... because i can't download update firmware...

abhy27 said:
Hay mate, please ur advice how to lock bootloader again.... because i can't download update firmware...
Click to expand...
Click to collapse
use "fastboot oem relock (your phone's unlock code)" and select yes with volume buttons & power

abhy27 said:
Hay mate, please ur advice how to lock bootloader again.... because i can't download update firmware...
Click to expand...
Click to collapse
There are some tools here in XDA to do that. Try to find in P20 pro thread.
P20 Pro & Tapatalk

doromax said:
There are some tools here in XDA to do that. Try to find in P20 pro thread.
P20 Pro & Tapatalk
Click to expand...
Click to collapse
If bootloader is locked can i receive update firmware ?

abhy27 said:
If bootloader is locked can i receive update firmware ?
Click to expand...
Click to collapse
Yes. After rebrand my phone in dual-sim I recived two OTA update. Now I'm in 8.1.0.128(C432). Last OTA of 537MB made about 3 days ago.

doromax said:
Yes. After rebrand my phone in dual-sim I recived two OTA update. Now I'm in 8.1.0.128(C432). Last OTA of 537MB made about 3 days ago.
Click to expand...
Click to collapse
But i just wanna lock again my bootloader mate...not rebrand

abhy27 said:
But i just wanna lock again my bootloader mate...not rebrand
Click to expand...
Click to collapse
you don't need to lock your BL if you want to receive OTA ! anyway if you lock it you will be not able to unlock it again! my BL is unlocked and OTA update work perfect ! last OTA for L29 is 128 firmware but not 128a !

mirot said:
you don't need to lock your BL if you want to receive OTA ! anyway if you lock it you will be not able to unlock it again! my BL is unlocked and OTA update work perfect ! last OTA for L29 is 128 firmware but not 128a !
Click to expand...
Click to collapse
Can you tell exactly how you did it please?

abhy27 said:
But i just wanna lock again my bootloader mate...not rebrand
Click to expand...
Click to collapse
I understand. I replay to your answer.
I said you to look here ==> https://forum.xda-developers.com/huawei-p20-pro/development/tool-tool-one-driversunlocktwrpfactory-t3779416
Or use FunkyHuawei tools.

smaybe said:
Can you tell exactly how you did it please?
Click to expand...
Click to collapse
Do you have a stock recovery or a TWRP? As I've read somewhere on the forum you have to be on the stock recovery to flash OTAs. But let someone confirm this cause I don't have the P20 PRO yet.

I don't have my bootloader code anymore how can I still relock it

Fatihykl said:
I don't have my bootloader code anymore how can I still relock it
Click to expand...
Click to collapse
Without the unlock code you cannot relock.

doromax said:
Yes. After rebrand my phone in dual-sim I recived two OTA update. Now I'm in 8.1.0.128(C432). Last OTA of 537MB made about 3 days ago.
Click to expand...
Click to collapse
Hey, what method did you use to rebrand your phone?

mickrick said:
Hey, what method did you use to rebrand your phone?
Click to expand...
Click to collapse
I used FunkyHuawei method (payed).
Now I'm on 8.1.0.156.patch03 - c432

doromax said:
I used FunkyHuawei method (payed).
Now I'm on 8.1.0.156.patch03 - c432
Click to expand...
Click to collapse
Is it simple enough to do? And did you relock the bootloader when it was complete?

mickrick said:
Is it simple enough to do? And did you relock the bootloader when it was complete?
Click to expand...
Click to collapse
Yes, it's pretty simple. I made it because I wanted to transform my P20 pro single sim to dual sim and it worked !
After procedure the new bootloader become re-locked. You can't use anymore the Huawei code to unlock boootloader and you can't root the phone or install twrp.
Until Funky find a system to unlock without code.

doromax said:
Yes, it's pretty simple. I made it because I wanted to transform my P20 pro single sim to dual sim and it worked !
After procedure the new bootloader become re-locked. You can't use anymore the Huawei code to unlock boootloader and you can't root the phone or install twrp.
Until Funky find a system to unlock without code.
Click to expand...
Click to collapse
You mean, you cannot use the code again due to rebranding?

doromax said:
Yes, it's pretty simple. I made it because I wanted to transform my P20 pro single sim to dual sim and it worked !
After procedure the new bootloader become re-locked. You can't use anymore the Huawei code to unlock boootloader and you can't root the phone or install twrp.
Until Funky find a system to unlock without code.
Click to expand...
Click to collapse
forever_lol said:
You mean, you cannot use the code again due to rebranding?
Click to expand...
Click to collapse
I had heard that using any of Funky's procedures relocks the bootloader and the Huawei bootloader unlock code no longer works. But like a lot of people, I purchased my unlock code from a 3rd party. So it would be interesting to see if it survived a Funky method.

mickrick said:
I had heard that using any of Funky's procedures relocks the bootloader and the Huawei bootloader unlock code no longer works. But like a lot of people, I purchased my unlock code from a 3rd party. So it would be interesting to see if it survived a Funky method.
Click to expand...
Click to collapse
I didn't know that we can buy unlock codes.
But surely your code do not work after procedure!
Because Funky firmware chanche your bootloader code. And so unlock codes doesn't work anymore.
P20 Pro & Tapatalk

doromax said:
I didn't know that we can buy unlock codes.
But surely your code do not work after procedure!
Because Funky firmware chanche your bootloader code. And so unlock codes doesn't work anymore.
P20 Pro & Tapatalk
Click to expand...
Click to collapse
Yes there are a few sites offering bootlocker unlock codes. https://ministryofsolutions.com/huaw...-new-firmwares does them for 30€, although they only accept so many paypal payments per day. https://global-unlocking-solutions-...es,_Choose_Model_Below/p5093122_19186756.aspx is €35 but has no limitations on paypal payments. I believe that both are totally legit, according to P20 onwers here.
Funky Huawei is a strange one. If you use one of their options to, say, change your region, model number etc, it will lock your phone again and make your current bootloader password useless. And the bad thing about this is, they don't offer an unlock service. Unless you pay for their unlimited use pass, which costs $132. Then they throw in a free bootloader unlock. I'm not sure if the relock and code breaking is a deliberate act by Funky Huawei but personally speaking, they should be giving a new working code to anyone whose unlock code they've trashed.

Are there currently any ways to unlock the Mate 10 (/Pro)'s bootloader?

After Huawei killed their bootloader unlock website, users have been left unable to unlock their bootloaders. Is there something like dc-unlocker for the Mate 10 (Pro)?

MikeTheGamer said:
After Huawei killed their bootloader unlock website, users have been left unable to unlock their bootloaders. Is there something like dc-unlocker for the Mate 10 (Pro)?
Click to expand...
Click to collapse
Yes dc-unlocker

As far as I know there's only one for the Lite, it didn't detect my phone

DC-Unlocker not supported the following devices:
WARNING:
Huawei P20 EML-xxx all versions not supported
Huawei P20 Pro CLT-xxx all versions not supported
Huawei Mate 10 ALP-xxx upgraded to Android 8x not supported
Huawei Mate 10 Pro BLA-xxx upgraded to Android 8x not supported
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Huawei Mate 9 MHA-xxx upgraded to Android 8x not supported

DC-unlocker works if you're on BLA-L29C432B142 or lower. They did something in B145 which fixed dc-unlockers unlock code generation and the backdoor they use with DC-Phoenix. And you can't use FH to downgrade either (Not tested on B145 but on B148-SP1).
I'm not sure what builds are on other custs, but this is the Night Shot update on C432.

F*ck, my phone was 142 and I have updated in 145 just out of the Box...
Damn.

Dc-unlocker Give it a crack might still work, you just need to make sure you put the phone into management mode so it can read it phone. Just unlocked mine last night. Running magisk v16 working decrypted twrp and emui 8.0

allanjohnkemp said:
Dc-unlocker Give it a crack might still work, you just need to make sure you put the phone into management mode so it can read it phone. Just unlocked mine last night. Running magisk v16 working decrypted twrp and emui 8.0
Click to expand...
Click to collapse
more information please,model number+software/build number
currently running a BLA-L09 8.0.0.132(C782) 10 PRO myself

steelmaggot said:
more information please,model number+software/build number
currently running a BLA-L09 8.0.0.132(C782) 10 PRO myself
Click to expand...
Click to collapse
Was Running BLA-L09 8.0.0.132 at the time fresh out of the box
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
Followed that guide, created an account cost me 4 EUR to read bootloader code.
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
Follow this guide to fix fastboot issue.
Typed fastboot oem unlock (code here without brackets)
Device will reboot and factory reset.
Use this TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Fastboot flash recovery_ramdisk twrp_bla_alp_0.7.img
Decryption and touch both working.
Install Magisk 16.0, Enjoy
For future updates you will likely need the full ota and the nocheck recovery img from HWOTA8

The question is from 148 is this possible to Downgrade with Funky Huawei to lower, 142 for example and Root with DC unlocker ?

cle_m_ent said:
The question is from 148 is this possible to Downgrade with Funky Huawei to lower, 142 for example and Root with DC unlocker ?
Click to expand...
Click to collapse
No it is not, at least one user couldn't (I know it's not much, but it's a friend of @Pretoriano80). I think someone in the Funky thread tried too.
It finds update and that but stays on 0% forever. He was trying to downgrade to both b145 and b142.

allanjohnkemp said:
Was Running BLA-L09 8.0.0.132 at the time fresh out of the box
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
Followed that guide, created an account cost me 4 EUR to read bootloader code.
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
Follow this guide to fix fastboot issue.
Typed fastboot oem unlock (code here without brackets)
Device will reboot and factory reset.
Use this TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Fastboot flash recovery_ramdisk twrp_bla_alp_0.7.img
Decryption and touch both working.
Install Magisk 16.0, Enjoy
For future updates you will likely need the full ota and the nocheck recovery img from HWOTA8
Click to expand...
Click to collapse
can confirm works on BLA-L09 8.0.0.132 build,just done it myself :good: :victory:

steelmaggot said:
can confirm works on BLA-L09 8.0.0.132 build,just done it myself :good: :victory:
Click to expand...
Click to collapse
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?

rockstang said:
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?
Click to expand...
Click to collapse
Bought it two weeks ago and when I set the phone up I received the OTA to 132 build
---------- Post added at 06:46 PM ---------- Previous post was at 06:43 PM ----------
rockstang said:
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?
Click to expand...
Click to collapse
Bought it two weeks ago and when I set the phone up I received the OTA to 132 build, I'm in the UK by the way

I have mate 10 pro running 8.0.0.141(c636) and I just tried dc it didnt work just got unknown error 375 everytime it tried to read it.

Has anyone tried BLA-A09 8.0.0.119(C567) I cant get dc unlocker to even recognize my phone.

Used DC Locker today on BLA-A09 8.0.0.111 fresh out of the box.
I followed these directions:
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
The one issue I ran into was fastboot oem unlock wouldn't work initially. I went into developers options to find the oem unlocking feature greyed out. To fix this turn off automatic updates in developers options. Then put your sim card in and restart your phone. (I was keepoing the sim card out to prevent updates) I was able turn on the OEM unlocking feature after this.

Erick-kewone said:
Has anyone tried BLA-A09 8.0.0.119(C567) I cant get dc unlocker to even recognize my phone.
Click to expand...
Click to collapse
Have you tried the fix? Worked for me, but I kept getting hung up on the drivers initially.

rockstang said:
Have you tried the fix? Worked for me, but I kept getting hung up on the drivers initially.
Click to expand...
Click to collapse
I got it to work. I just had to change it from modem to phone

Guys, i just bought mate 10 lite and i have bunch of noob questions. Instead of starting new thread i wanted to ask here.
So my phone on RNE-L21C185B142 version. I read the forums and got my bootloader unlock code from dc-unlocker before its too late. So i am able to unlock my bootloader and root my phone right now.
1- Should i unlock my bootloader? I was using cyanogenmod and lineageos on my previous 2 phones. I like customize my phone thats why i install custom roms.
2-If i unlock my bootloader am i still able to get official updates somehow (like flashing from adb or twrp) without relocking bl?
3-If i install custom rom or root can i go back to stock 8.0.0.142 version so i can unlock my bl again?
Thanks in advance

Camera2api

Is it already possible to enable it without lossing data?

GK_NL said:
Is it already possible to enable it without lossing data?
Click to expand...
Click to collapse
Yes root phone and watch any video on youtube for mi a2 camera api
Poslano sa mog Mi A2 koristeći Tapatalk

For activate camera2api you need unlocked bootloader, you don't need root but you need the bootloader unlocker. When you unlock your bootloader you gonna lose your data.

syncstar32 said:
For activate camera2api you need unlocked bootloader, you don't need root but you need the bootloader unlocker. When you unlock your bootloader you gonna lose your data.
Click to expand...
Click to collapse
there's a trick that works with A1 that you may want to try:
enable fastboot
boot into fastboot
type the oem unlock command WITH BUTTON DOWN PRESSED
phone reboots directly to fastboot again
typoe: fastboot reboot
??
profit!
i don't know it it also works for a2

luminoso said:
there's a trick that works with A1 that you may want to try:
enable fastboot
boot into fastboot
type the oem unlock command WITH BUTTON DOWN PRESSED
phone reboots directly to fastboot again
typoe: fastboot reboot
??
profit!
i don't know it it also works for a2
Click to expand...
Click to collapse
It doesn't work bc we have to confirm using volume keys

syncstar32 said:
For activate camera2api you need unlocked bootloader, you don't need root but you need the bootloader unlocker. When you unlock your bootloader you gonna lose your data.
Click to expand...
Click to collapse
To activate the camera2API you need root (access to the smartphone with elevated permissions), at least root temporary.

So you need root and a unlocked bootloader.

if i try to install pixel 3 camera app without rooting my MI A2 ..will it work after the android 9.0 update? if it's gonna work then, will i still get those monthly security patch updates or the OTA updates?

ArmanAfridi said:
if i try to install pixel 3 camera app without rooting my MI A2 ..will it work after the android 9.0 update? if it's gonna work then, will i still get those monthly security patch updates or the OTA updates?
Click to expand...
Click to collapse
No need root, just to unlock. You need to go to pie first and then enable camera2api. if you upgrade from Oreo you will loose it in pie.
Search the forum, there are guide how to unlock camera 2 api witout loosing ota

ki69 said:
No need root, just to unlock. You need to go to pie first and then enable camera2api. if you upgrade from Oreo you will loose it in pie.
Search the forum, there are guide how to unlock camera 2 api witout loosing ota
Click to expand...
Click to collapse
will i still get those system updates? ..

ArmanAfridi said:
will i still get those system updates? ..
Click to expand...
Click to collapse
Yes