I have an 8" KLD9 unit with a dead touch screen. It started not working in certain areas of the screen a few months back and now no longer works at all. Can anyone point me to a location (AliExpress?) where I might be able to buy a replacement touch screen digitizer? This question has been asked before but not for a while and the supplied links no longer work.
I haven't opened the unit up yet. Is it likely/possible it is just a dodgy connector and the actual sensor itself is still functional?
Info on my unit:
MCU version:
MTCC-KLD9-V2.98
Sep 12 2016 17:21:34
Android Version:
5.1.1
1024*600
Kernel version:
3.0.101+
[email protected] #42
Tue May 17 21:50:34 CST 2016
Build number:
rk3188-userdebug 22062016.17:05:11
Model number:
207
CPU:
ARM Coretex-A9 @1.6GHz (x4)
Memory:
1024 MB
I have exactly what you need. It is a complete 8" 1024*600 screen with digitizer that I have left from my MTCB/C Klyde HU.
The screen was used for about two months. If you are interested write me a PM
Related
Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
shaman_Turtle said:
Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
Click to expand...
Click to collapse
I'd guess that you haven't quite fitted it back together perfectly or the firmware got changed for the touchscreen by Asus for later revisions (or earlier) and you need to do a firmware touchscreen update.
Are you using a custom rom?
Hello,
I have a Stock Rom with last Update.
shaman_Turtle said:
Hello,
I have a Stock Rom with last Update.
Click to expand...
Click to collapse
So that should have applied the latest firmware. Hmmm
Go to settings, about, Hardware Information, Touch Panel version.
Mine is Raydium-0004-0000
What is yours?
Good question !!
I have make a 2 screenshot :
06 mai 2015 at 22:33
GPS V7.4.15 WIFI V7.1.50 Bluetooth V 11.0.27 Ecran tactile Raydium-0003-0008 Controleur PAD-AC32T-0309
and 07 mai 2015 at 09:08
GPS V8.1.16 WIFI V 8.0.46 Bluetooth V 12.0.44 Ecran tactile Raydium-0004-0000 Controleur PAD-AC32T-0311
Hello
My old touchscreen is ref : 5449N FPC-1
and my seller send a Compatible touchscreen but your ref is 5235N-FPC1.
I do not know what to do anymore?
Someone else he changed his touchscreen ???
Hi there, i am not too sure if i need to start a new topic, but i guess this is the best way to get your expertise on my issue.
I am driving a seat leon 1p (2008) which had the RNS510 (seat media system so whitout the sd card slot) built in. Sadly the display died (full white) and i had to search for something else.
I bought me a RK3188 device (it says ERISIN in the advert, i cannot find that name on the box or device itself) with a load of nice features. Most of them are working like they should, others have some hickups and 1 is really bothering me. I have made a youtube video and the seller says they don't see whats wrong. I bought it trough eunavi on aliexpress.
Here my explanation, the leon is fitted with a large dot matrix mfd screen in the dashboard (boardcomputer) (there are versions with a smaller display)
the big display is served with the windscreen wiper handle, which has 3 buttons, up, down, and ok/reset.
When i want to reset my computer (trip, avg fuel etc.) i need to press the reset button about 3 seconds. the radio then decides to shutdown... once i release the reset button, the radio decides it doesnt want to shutdown.
Quite weird in my opinion. So i tried programming the wheelkey settings, according to the manual. first i go into wheelkey settings, then i press clear / reset.. then i need to press any wheelkey (so allso the volume up / down, next, previous etc etc.) the radio does respond to that, but not with the wheelkey settings programme. I'll try to add the youtube link here as well.
next to this, some weird things happen.
1.The display is way too bright, so i asked the seller what to do, they told me they will send a new display which i should fit myself. In my opinion not the best solution from a shop but i understand their marigins aren't enormous and they try to fix it cheap. the display hasn't arrived yet so i can't say if the new display gives the solution for me.
2. when i have the tuner on, with af-rds function, it seems to scan to any rds station once the signal gets weak. Maybe i'm spoiled, but i think AF needs to search for the station with the same ID as the one i was tuned in to.
3. the dab+ dongle and window antenna give poor reception now. this is presumeably caused by the way i fitted the aerial, on top of the ventilation shafts behind the dashboard. I want to move the antenna to behind the rear view mirror (horizontally) which will hopefully give good reception. (does anyone know if horizontal positioning of the antenna is okay for dab+ ?)
<- the issue with the MFD input
<- the whiteness of the display (cannot be edited with standard settings) it was quite cold when i made this video, it seems it is a little better now or i am getting used to it
so quite a long story and i have my fingers crossed on your response !
maybe good to let you know:
MCU version
MTCD_LM_V1.90_1
sep 23 2016 09:37:48
Android-sersion
5.1.1
Kernel-version
3.0.101+
[email protected] #90
Fri Sep 9 16:24:49 CST 2016
Build-number
rk3188-userdebug 23092016.13:30:50
Hi,
I bought a JRNAV radio for my Seat Leon. (Ali Express).
4G RAM Octa (8)-Core Android 6.0 AUTO dvd-speler VOOR SEAT LEON 2014 auto audio gps stereo head unit Multimedia navigatie
the screen is not working anymore since the extreme weather last summer in NL (40Celsius).
i think its a android 6 radio.
When i connect it to the power the button lights go on, but the screen stayes off.
How can i fix this? change the screen? build in a extra fan for the heat? update the software/flash/root it?
Does anyone has for sale or know where to find this Klyde TFT board for Rk3066/rk3188?
https://www.aliexpress.com/item/KLY...-6-0-Android-7-1-Android-8-0/32835499904.html
Why? I have a 7.1 eonon unit, which would be klyde, and at the average brightness down the lighting flashes, I changed mb and display but the problem remains
Hey everyone.
A day or two ago I noticed some new letters and numbers under the date on my lock screen. I'm neither certain how they started appearing nor how to turn them off, but a bit of Googling suggests that this is the date on the Hjiri/Islamic Calendar (see Wikipedia article entitled "Islamic calendar"). I can't upload a photo, nor link externally because I haven't posted enough in this forum, but it appears in the bottom-left corner, beneath the date: AH 1441-07-08.
Does anyone know how to turn it off? I've tried restarting and the only recent change was pairing a Fitbit Charge 3 with my phone. Any help would be most appreciated.
Cheers,
Kurt
Model: CLT-L04
Build number: 9.1.0.365(C792E9R1P11)
EMUI version: 9.1.0
Android version: 9
I'm looking for an answer to the same question. Have you ever figured it out?