Ok fixed all the other problems lol now this last one i hope.. I was getting sound in both ear pieces but now only one. I looked threw the settings and did not find anything that would help unless i misssed something. And i tried 2 diffrent headsets and same thing
Thanks
blinkste21957 said:
Ok fixed all the other problems lol now this last one i hope.. I was getting sound in both ear pieces but now only one. I looked threw the settings and did not find anything that would help unless i misssed something. And i tried 2 diffrent headsets and same thing
Thanks
Click to expand...
Click to collapse
Did u use the usb to jack reduction with your headsets or they were both bluetooth headsets?
The headset (both of them) plug right into the usb port. Both have 2 ear pieces and only one ear piece on each headset works.
blinkste21957 said:
The headset (both of them) plug right into the usb port. Both have 2 ear pieces and only one ear piece on each headset works.
Click to expand...
Click to collapse
That could mean that u have something with the usb plug on your phone. I had this problem, but I used the reduction and my earplugs with 3.5mm jack, and I found out that the reduction was damaged.
You might be right cause i can wiggle the cord and it cuts out alot... So i just ordered a bluetooth headset with 2 ear pieces and just listen to it that way. At least the usb port on the phone still chargers ok and syncs ok thats the main thing.
Thanks for your help
blinkste21957 said:
You might be right cause i can wiggle the cord and it cuts out alot... So i just ordered a bluetooth headset with 2 ear pieces and just listen to it that way. At least the usb port on the phone still chargers ok and syncs ok thats the main thing.
Thanks for your help
Click to expand...
Click to collapse
U are welcome.
I wish u luck with your new headset.
I had this same problem last week... after a year of use and finally the contacts on the usb port on the Tilt got dirty enough I'd only get sound in one ear. I ended up cleaning it with an alcohol swap and a small pin to work the swap around GENTLY. Lots of gunk removed, problem gone.
Hi,
Wanted to ask if this was a common problem. The 3.5mm socket on my Xperia has worn two pretty significant grooves into my headphone jack. It's now so bad that the right channel doesn't work half the time. The problem persists when I use the headphones in other devices to it's definitely managed to damage the heaphone jack.
I experimented with the included microphone lead and it has also managed to scar that a little so I immediately stopped using it.
Has anyone else encountered this problem? FYI the headphones are AKG K414P.
Thanks
Tome
The socket sucks. It ALMOST broke my in-ear headphone's jack. It's too tight.
yeah the socket is really tight on mine as well, haven't streaked any headphones yet though, maybe I haven't used them enough?
I have something like this. I think I have the same problem.
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
That's what happened to me. Be sure to grab that rubber very tightly.
ksian said:
I have something like this. I think I have the same problem.
Click to expand...
Click to collapse
Same problem here, i think this is a common problem on all XPERIA. The socket is too damn tight.
Anyway once you know that you start taking care and you won't break anything. And it's clearly an advantage that it's so tight, if you're using big headphones and your X1 slips out of your hand, it won't touch the ground (Assuming the cable is not too long and you ain't too small ). I like this.
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
tome_1 said:
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
Click to expand...
Click to collapse
I DO have BOTH problems. My plug has quite deep scratches. But no loss of audio so far. I think this will get better with time, the socket will also lose some material If your headphones are expensive and break quickly (and you absolutely want to keep your X1 as Mp3player) you might want to use a very small extension cord to avoid damage to the headphones themselves. Extensions of say 2" exist.
dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
Same thing it did to mine, killing my Creative Aurvanas's 3.5mm jack rubber housing. They still work but the rubber is loose.
Ah well, because of that I am actually looking at some Shure E530's (the Xperia is a pretty good source IMO). They have a detachable extension cord so i can use a L-plug instead of a straight plug.
Really, use L-plugs, they are a lot more durable against the tight socket. Its just because the sound is really great for a phone, hell, I bet its better than most MP3 players, else i would be very mad, killing my favourite IEM's . Very clean sound, although sensitive IEM's will hiss but that is expectable from such a 'noisy' thing like a fully packed-with-features phone.
But hey, a tight socket is better then a loose socket, or a proprietary extension cord like the HTC's.
Apart from killing my Aurvana's I still think the 3.5mm socket is High Quality Stuff. It just feels 'right' when you plug in your IEM's/headphones.
Keep in mind that you shouldn't keep the extension plugged in all the time because the phone actually detects this and routes certain sound events from the speaker to the headphones. For instance if you pick up a call with the extension plugged in but no headphones, you will not be able to hear the caller.
yeah i was thinking that i might have to make/buy a short extension to save my expensive headphones
it's like you guys are saying, the sound is good enough that i want to put good headphones on so i'll have to find a way to protect them. I wonder if the included handsfree extension is resistant to the phone's socket?
I use the stock extension. It gets scratched as well (have xperia for 2 months). As for the sound quality, I'm thinking about repairing my good old Ipod nano for listening mp3's. I do think, that it has better sound quality and more than that the battery of the phone won't die out so fast (playing music for about 2 hours a day).
Lol. Would not have noticed this without you guys. Who would look at their earphone jacks? Either they are very bored or something about their earphones is screwed up.
Does other HTC phones have these problems? Oh wait, only the THD has 3.5mm.
The jack has ground grooves into the jack on every single pair of earphones I own,and based on this alone, I'd say SE, give me my freakin money back!
Is it serious? Probably not. But is it supposed to do that? Hell no.
I don't want to use the stock extension cable, otherwise I wouldn't choose a phone with a 3.5mm jack, Jesus bleeping Christ.
I have the same problem here. I used a nokia handsfree and after 2 days I had that scratches and sometimes I couldn't here well, the sound was faded and i had to turn the jack in a certain position. Today I tried an Iphone handsfree and it doesn't work well..
I don't know why... Is it to thin? It's new but the sound is faded. I don;t get it? Has anybody tried this apple headphones? (The one with microphone, so 3 stripes on the jack)
LATER POST: I TRIED ANOTHER HEADPHONES AND THE SAME BLURED SOUND...SO I GUESS MY SOCKET IT'S SCREWED
well, then again the apple handsfree is thiner i guess, because i tried some Lg headphones and they were ok. the apple headphones are functioning conected on laptop. I don't know what to believe... I really wanted to use the apple stuff on this phone, i should buy an extender.
use your xperia handfree as an extension, have been doing that for over a year now, and even though it's scratched like hell, it works fine, without damaging my beats
Could you please tell me wich model of headphones by SE are they? I mean the x1 headphones.
I found out that iphone's 3.5mm socket is not like the others so the x1 is not like the others and maybe that;s the reason i can;t use the apple headphones.
ok...got it.."If they have a mic, then they're useless for anything but an iPhone.
Apple decided rather than follow the industry standard of Right/Left/Mic/Ground, they would make their own up. They chose to make their socket Right/Left/Ground/Mic, which means your N900 is trying to ground the headphones through the mic, which clearly will not work.
In short, they won't work on anything except an iProduct."
Ok im listening to music when all of a sudden the music cuts out, so w/e i unplug and plug in the headphones and it works again. But lately the earphone jack cuts out with any little movement to the earphone at all, i cant listen to music with the phone in my pocket because it cuts out when i take a step.
If anyone has any easy fix for this weird problem, please tell me.
*note: just to be sure it wasnt software based, i went to stock rom and just to make sure it wasnt the earphones i tried it with 5 pairs
any advice?
i've got the same problem, tried using headset blocker, but that didn't help
edit: If someone know how to delete this function out of android, i would be very pleased, because i dont use it!
i fixed it with a little piece of plastic i put between the headphonejack and the case like this:
http://img39.imageshack.us/i/rimg1303u.jpg/
How did you get the plastic in there? i tried biting off a piece of plastic straw but it wont go in all the way
Mine used to do that, but changing to new set of headphones (where the male connector wasn't so worn) fixed the issue for now.
I think the headphone jack is just a little sloppy on tolerances (and a little bit weak too). You might need to send it in for repair.
Markolic said:
How did you get the plastic in there? i tried biting off a piece of plastic straw but it wont go in all the way
Click to expand...
Click to collapse
i used a part of a plastic straw. http://de.academic.ru/pictures/dewiki/116/trinkhalm.jpg
but it was 15 minutes work but it was worth that cause the jack is working like before.
Hey Guys,
So since the past couple of NIGHTLYs I haven't been able to use my headphones as my phone no longer detects it. It detects it briefly but then starts to glitch out playing and pausing the music every second. Apparently it was a problem in CM 11 as well but none of those solutions seem to work for me. Does anyone else have this problem on their Moto X? I have a XT1052. I'm thinking maybe a complete wipe might be able to fix this but they might already be solutions that I wasn't able to find. Please help.
Thanks
Have you taken a toothpick or cutip with the end cut off inside of it to check for lint? I've seen a lot of people do that and pocket lint was the problem
Edit: just to clarify I'm talking about the headphone jack
heyis4horses said:
Have you taken a toothpick or cutip with the end cut off inside of it to check for lint? I've seen a lot of people do that and pocket lint was the problem
Edit: just to clarify I'm talking about the headphone jack
Click to expand...
Click to collapse
Thanks for the reply. I haven't done that. But for some reason, only my SkullCandy headphones don't work. My Apple EarPods and other headphones work just fine, its the only headphones that I actually want to use, that is not working. Will give the pocket lint a try and let you know.
Thanks.
I replaced the battery in my wife's phone and immediately afterwards I hear no audio from the earpiece. When I plugin headphones I can hear audio fine from the headphones, youtube pauses when I remove the headphones which indicates it does know that the headphones aren't plugged in and should be sending audio to the earpiece. Does anybody have any idea what connections might be the issue? I have taken the thing apart 4 times trying to find what connector might be misaligned with no luck thus far and really don't want to have to get another phone.
Same exact problem here...
Hi there archangelus2,
Have you ever found a fix to the problem? I also noticed that my loud speaker is now not as loud as it used to be... and by trial and error, I found out that squeezing the top right corner (looking at the screen) it gets a bit louder so I guess that some of the contacts aren't touching well or some other odd crap is going on. The phone is easy enough to open and take apart (if you know what you're doing and are very careful and gentle), but I did notice that given the complains that have been posted post-repair, it does not seem to be too reliable when putting it all back together. The earpiece going completely mute is complete nonsense for instance as there isn't all that much that could go "wrong" in those contacts and I wonder if something gets messed up at the software level after a replacement of hardware like the battery, is performed.
Any help and info will be greatly appreciated.
Cheers! and stay
archangelus2 said:
I replaced the battery in my wife's phone and immediately afterwards I hear no audio from the earpiece. When I plugin headphones I can hear audio fine from the headphones, youtube pauses when I remove the headphones which indicates it does know that the headphones aren't plugged in and should be sending audio to the earpiece. Does anybody have any idea what connections might be the issue? I have taken the thing apart 4 times trying to find what connector might be misaligned with no luck thus far and really don't want to have to get another phone.
Click to expand...
Click to collapse
Is there anyway that you accidentally messed with the earpiece? There is a small rubber protector inside the phone on top of the earpiece, I suggest you check to make sure this is positioned properly on the speaker.
Best of luck,
Matt
Yes, I just got my earpiece fixed. I had a 16 GB AT&T model who's sound was terrific. Then i got greedy and went for a 32 GB latin american model (some telecom I forgot the name of) its earpiece sound was extremely low. I ordered 2 earpieces from ali express just in case they were to be changed. Yesterday I took it to a shop and the guy fixed the original earpiece by applying some tape around the earpiece to focus the sound out of one way and now its as good as new. $10 and am happy.
So yeah probably in your case I'd say he kinda misplaced the earpiece. You may get it checked.