Related
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!
this my new phone.. I don't understand my xperia x1 couldn't detect on pc.. How I solve this problem??
Is my pc should install the driver?? or just plug to usb port??
please the instruction...
What os do you use on your pc? What rom on your phone? I little bit more information would be useful if you want somebody to help you.
are u already install activesync on ur pc?
That's why I asked for the os in use. Depending on the os it's Active Synch or the Mobile Device centre.
1. try this:
start --> settings --> usb to pc
untick "Enable advanced network functionally" or you can tick disk drive if you want to transfer files
2. if you are Windows XP users, please install ActiveSync
2. if you are Windows 7 or Vista, please install WMDC aka Windows Mobile Device Centre
it comes with the CD when you bought XPERIA X1 if you don't have it just GOOGLE!
3. If you are a Mac User, try Missing Sync or Sync Mate, IMHO Sync Mate is better
4. If you are Linux User, no idea I have nerver had good sense about Open Source, but try this: http://www.ehow.com/how_7225580_sync-windows-mobile-linux.html
If you have trouble with Active Sync or WMDC (I have experienced that with my Ex o2 XDA mini),
1. find programs that might block COMM port, it might be another PC Suite, in my experience it's my P910 Sony Ericsson Sync and Palm Desktop Manager, just unsintall them
2. Don't forget to tick enable USB @ COnfiguration (aka settings)
3. Find out if your phone detected when you tick "disk drive" @ USB to PC --> If not, might be faulty USB
4. try another PC (Windows) I have found it more compatible than Mac, that's the reason I have never bought and upgrade my Mac.
5. If you still can't access, try another stock ROM and see how it be...
6. If you are Windows User Computer, try to see if your phone really detected @ PC, click start, (Windows 7) click device manager or if youa re on XP, try to search it at Windows Properties, see if there's your device there!
7. Okay if you found it useful, pls click thank's button, I try to make any possibility that is possible. You won't be a zombie if you click thank's button
Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them?
thanks!
Are you on 64bit Windows 8?
Coz I faced the same problem.
But then I tried rooting on a Windows 7 pc. And Windows automatically installed the correct drivers. Seems that adb isn't supported on 64bit Windows 8.
Sent from my C5302
Connect your Xperia SP via USB. (Don't forget to enable USB Debugging)
Then run the Software (http://adbdriver.com/downloads/) and choose ur phone, which should be listed in the list.
DeathCzar said:
Are you on 64bit Windows 8?
Coz I faced the same problem.
But then I tried rooting on a Windows 7 pc. And Windows automatically installed the correct drivers. Seems that adb isn't supported on 64bit Windows 8.
Sent from my C5302
Click to expand...
Click to collapse
I'm using Win7 32-bit.
And I cannot use DoomLord's Easy Rooting Toolkit (nothing is happening)
Thanks Deathless93!
Problem solved.
shinichizx said:
Thanks Deathless93!
Problem solved.
Click to expand...
Click to collapse
how?
regentonne said:
how?
Click to expand...
Click to collapse
download adb drivers from here: http://adbdriver.com/downloads/
shinichizx said:
Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them? please
Click to expand...
Click to collapse
Normally drivers are being installed when you first connect your phone to the PC
shinichizx said:
Hi!
I cannot find ADB Drivers for Xperia SP (need them to root the phone )
Can someone provide a link to download them?
thanks!
Click to expand...
Click to collapse
use this software to download ADB driver
http ://adbdriver.com/upload/AdbDriverInstaller.exe
[remove space from the link above as I cannot post outside link because i am new here ]
If you get error(mostly on windows 8/8.1) while installing driver; then you have to Disable Driver Signature Enforcement and give another try.
To Disable Driver Signature Enforcement:
1) Move the mouse pointer to the BOTTOM RIGHT of the screen and go to SETTINGS.
2) Click CHANGE PC SETTINGS
3) Choose GENERAL from the left side and under Advanced Startup click on RESTART NOW
4) Your PC will restart and you will see some options.
5) Select TROUBLESHOOT > ADVANCED OPTIONS > STARTUP SETTINGS > RESTART
6) Select Disable Driver Signature Enforcement and your PC will boot.
Now install driver using above given link.
Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later
Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.
Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
@thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.
Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.
gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.
gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.
Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse
Q&A for [ROM] HUAWEI Ascend W1-U00 | v1.00
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
DerSchorsch1 said:
It seems that in this video it's described, how the sdcard-problem can be permanently solved, so that we don't have to put the card out and in after a shutdown. Is this right?
Can this be implemented in the rom?
I don't understand the steps to do in the video. I can only recognize that i has something to do with visual studio. Can someone describe it more detailed?
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Everyone please donate, so he can buy a new gorilla glas display!
Click to expand...
Click to collapse
You did notice that this is an emulated device I hope? Rules for an emulator and for a live device are usually different.. just because a fix works in the emulator it doesn't have to work with the device.. and as far as I'm aware it doesn't.
Carrier Lock
Hi there,
Thanks for the ROM dev work!
I have a W1 which was O2 branded, after the procedure of installing the ROM, my phone has become carrier locked..
Is there an option I missed during install?
Regards,
Ed
I need help
Hello, I also use the HUAWEI Ascend W1 I come from China, I would like to know about the method of making the rom, and I open the app file will get a mbn file and do not know how to proceed, and I'm very interested in this, you can explain under it? (My English is not very good, but please forgive me use google) If you teach me, would be extremely grateful!
Hello,
thanks WojtasXda for the effort!
---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------
It will be possible to install the rom from Osx or linux?
Registry tweaks from russian forum (4pda)
Here, guys, tweaks for our HUAWEI W1.
Go to \Windows\Packages\RegistryFiles and place OEMSettings.reg here.
First bootup will be ~2 minites.
Tweak list:
-Camera sound on/off in sound settings;
-Wi-Fi connection sound on/off;
-3g/Wi-Fi arrows in status bar switched on;
-Activated PfD (don't install program);
-Jailbreak(interop unlock,capabilities unlock)
-Can be installed hacked appx's from wp-seven
-SDK registered
-Search button opens google
-Any app can be placed to camera's button (e.g. OneShot)
-Now you have Nokia Lumia 920 (doesn't really work).
To make your phone 'NL920', you must mount in regedit 'SYSTEM' and install 2nd (zip). After that, you can easily install all Nokia Exclusives via SysApp Pusher (also, more apps in store!).
I think you've got a typo in the OEMSettings.reg file (inside the same-named archive), on one of the tweaks that's supposed to give file system via USB:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvn]
should be
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvc]
unless it's supposed to control the Media Transfer Protocol Subversion
Will this work with Huawei Ascend W1-U00 from Globe PH plan?
Hi.
My phone was given to me by my mother who received it with her Globe (a Philippine mobile network service provider) postpaid plan (which unusually uses prepaid services). I've been frustrated with this phone's storage becoming full very easily even though I only have very few apps (except for Spider-Man Unlimited which downloaded a 200-MB DLC) installed and I don't put any files in the phone storage. Since Huawei seemingly abandoned their Windows phones, there's no hope of us getting any update so we're stuck with the stock WP8 update 1. Will this custom ROM work with this particular W1-U00? Does anyone know where I can get a stock ROM for this particular phone?
Name: Windows Phone
Model: HUAWEI W1-U00
Software: Windows Phone 8.0
Screen Resolution: 480x800
OS version: 8.0.10211.204
Firmware revision number: 1030.5614.29400.20500
Hardware revision number: HD1U8835M Ver.B
Chip SOC version: 8230
WojtasXda said:
Hello everyone !
I have new W1, but this is U34 version. Anyone tried flashign this model? Acctually QPST shows error "Cookie (if present) not received.
Click to expand...
Click to collapse
I have the U34 and I've not been able to flash it. I always get the same cookie error in QPST, and handshake failure error in WP8 Flash Tool.
I hope you will be able to find the way to flash the U34.
You need install Windows 7, Use Qemu or Vmware. Drivers from package with QPST doesnt works in W8.
Click to expand...
Click to collapse
That's not true at all. QPST works perfectly fine on Windows 8. The only issue is if you're running a x64 OS, in which case you need to run the QPST programs as admin.
Is this ROM only in English language?
Problems with Flashing
Hello!
At First thanks for the good work. I will donate it, if i getting it work for me.
I got some Problems with flashing.
1) With Flash Tool:
Diag Setting is on, Phone is resetted and with the Flashtool i get the "Firmware Handshake Fail"-Error.
2) With QPST i can get into Download Mode (Qualcomm ... 9008) but then it shows me a "Cookie not received"-Error.
I tried the Flashtool in Downloadmode but that doesnt recognize my device.
My PC-Config:
Windows 7 Ultimate 64-Bit
Intel i5 Notebook
My Handy-FW:
Huawei W1-U00 Simlock Free
OS Version: 8.10.14203.306 Developer Preview
Thank you very much!
Edit:
I got the Problem. It only works for me without Diag Settings and only with QPST.
The folder from the Repair Bootloader was: W1-U00 Repair bootloader/flashing/
and i only copied the "flashing" folder. Now no "Cookie"-Error.
Hope this helps someone....
Step 2 error
I finish step 1. Flash custom ROM with QPST (Windows 8.1 x64).
Phone in mass-storage mode (all disk available).
Qualcomm MMC Storage USB Device present in Device manager.
When run WP8CRUU get error: Cannot open device "Qualcomm MMC Storage USB Device" Error 5 .
Whats wrong?
Problem solved:
With phone connected as mass storage reinstall Qualcomm USB drivers!
Lag issue on the scroll
Hi @WojtasXda, I installed this wonderful ROM yesterday and everything is working perfectly THANK YOU SO MUCH <3
but when I scroll something with the finger always placed in the screen it lags a bit.
Huawei Ascend W1-U00
If you could help me to find a fix I thank
Error 109 on WP8CRUU.exe
Does v1.10 require v1.00 flashed first? I'm getting an error 109 (Cannot open device Qualcomm MMC Storage USB Device) when I run WP8CRUU.exe. My phone's (W1-U00) already in mass storage mode.
Now, I'm getting an error 5 (Cannot open device Qualcomm MMC Storage USB Device).
Can anyone please help me with this? I was able to flash the ROM with mass storage mode capability and set my phone to mass storage mode. Now, I can't flash the custom ROM because of this error. I don't think I missed anything. I'm running this on a Windows 7 Ultimate 64-bit. I didn't install MS Visual Studio 2013 since it requires Windows 8.1. I did install the Qualcomm USB drivers, simpleio, and QPST. I have MS Visual C++ 2005, 2008, and 2012 (all 32-bit) installed.
Arhy's workaround didn't work for me, by the way.
personal settings/data
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
blonder_andi said:
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
Click to expand...
Click to collapse
Try going to Settings -> backup.
tempname said:
Try going to Settings -> backup.
Click to expand...
Click to collapse
Thanks for the reply...
As far as is can see you just can backup fotos, messages, and IE-settings.
(no contacts, calender-information, certificates,...)
Is there another way to get at least my contacts from WP8 to WP8.1?
An additional question:
Is it possible to get back to WP8 after flashing the WP8.1 rom?
Any hints welcome
best regards
andi
install HUAWEI Ascend W1-U00 | v1.10
Hi, i try to install these rom.
To install that i do this steps:
1) Enter Qualcomm emergency mode
2) Click Start>All Application>QPST>QPST Configuration and configure phone
3) Start>All Application>QPST>eMMC Software Download，Click “Load Build Contents…” Select contents.xml in unrared W1-U00(C00)Repair bootloader.rar，Check "Program Boot Loaders",UnCheck "Program MMC device", Click Download
4) After complete, the port will change into Qualcomm HS-USB Diagnostics 9006
5) UnCheck Program boot loaders，Check Program MMC device，Select Qualcomm MMC port，Click Download again.
6) Wait for it to complete, disconnect phone.
7) Press and hold "vol -" then also press and hold Power button and connect the phone to the computer, now the device manager will display WP8 UEFI USB SimpleI/O Port.
8) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
9) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it
10) Run device in mass storage mode
11) Run WP8CRUU.exe... BUT
No instrunction, only black console. when i close the console the copy begin.. but stop at 45% with "Error: cannot write 5 file. Error 5"
Suggestion?
SOLVED: must be waiting on the black console
I can not find Data\\PROGRAMS\\WINDOWSAPP directory，how can I get full FS access ？