Related
This is place where you can come and ask questions regarding support as well as any other general discussion for the Null rom. Please keep the development thread to just that DEVELOPMENT. The developer of this rom is here to develop and not here to answer your questions because you can't take the time to figure out the answer yourself. This will be a community driven thread. Therefore, if you feel something needs to be added to the OP please mention me in a post and I'll take a look
If you need to download the rom free to stop by the dev thread to download. However, if I see you ask a question in here and then go to that thread to ask the same question I will be handing out infractions. Please consider this your only warning.
On a side note, I'll be transferring the OP of this thread to a person with this device in due time. However, for the moment this needed to be created. If you are willing to take the OP from me please feel free to send me a PM. The only requirement that I would have is that you keep it updated properly.
FAQ / IT DOESNT WORK ! WAH
INTERNET ACCESS
GO INTO "FULL SETTINGS -> BLUETOOTH -> SELECT YOUR PHONE SETTING ICON (ON THE RIGHT OF PHONE NAME) -> TICK INTERNET ACCESS".
ENSURE BLUETOOTH TETHERING IS ENABLED ON YOUR PHONE BEFORE HAND OBVIOUSLY.
*NOTE* ENSURE YOUR MOBILE DEVICE SUPPORTS TETHERING, US VARIANT PHONES HAVE RESTRICTIONS INPLACE. REFER TO THE US INTERNET TETHERING THREAD.
*NOTE 2* BLUETOOTH TETHERING DOES NOT AUTO RECONNECT, INSTALL THIS THIRDPARTY SOLUTION ON YOUR GEAR TO ENABLE AUTO RECONNECT.
PLAYSTORE / GOOGLE ACCOUNT MANAGER HAS STOPPED..
VERIFY YOU HAVE A BLUETOOTH INTERNET TETHERING CONNECTION ESTABLISHED BEFORE ATTEMPTING TO ADD A GOOGLE ACCOUNT.
MUST NOT BE USING THIRD PARTY TETHERING, EG. PDANET.
HOW DO I FULL WIPE?
BOOT INTO RECOVERY MODE AND SELECT THE "RECOVERY" OPTION. DO THIS AFTER FLASHING THE ROM
UNABLE TO WAKE GEAR WHILE IN PHONE CALL
THIS IS CAUSED BY THE HOME BUTTON REMAP MOD, THE HOME BUTTON MUST BE PRESSED IN ORDER TO WAKE THE GEAR UP IN THIS STATE.
ONLY WORK AROUND IS TO EITHER USE THE WRIST WAKEUP GESTURE OR DISABLE THE HOME BUTTON REMAP MOD.
*NOTE* BY DISABLING THE HOME BUTTON REMAP MOD, THIS WILL DISABLE THE ABILITY TO MANUALLY LOCK THE SCREEN WHILE USING A CUSTOM LAUNCHER.
DOUBLE TAP BRIGHTNESS/SOUND TOGGLE HAS DISAPPEARED
THIS IS CAUSED BY USING THE FULL SYSTEM UI, SIMPLY PUT IT REPLACES THE DOUBLE TAP WINDOW WITH THE NOTIFICATION SHADE. BY USING GRAVITYBOX YOU CAN ADD ADDITIONAL TOGGLES LIKE BRIGHTNESS & SOUND TILES TO THE FULL NOTIFICATION SHADE.
OTHERWISE SIMPLY REFLASH THE ROM WITH THE FULL SYSTEMUI OPTION UNTICKED.
SCREEN FLICKERING/GITTERING
THIS IS CAUSED BY THE INITIAL BOOTUP, REBUILDING THE CACHE AND INITIALIZING ALL THE APPS. GIVE YOUR GEAR A FEW MINUTES TO SETUP AND RESTART.
SCREEN UNLOCKS TO NOVALAUNCHER PAGE PREVIEW?
GO INTO "NOVA SETTINGS -> GESTURES -> HOME BUTTON -> NONE".
ENABLE DEVELOPER SETTINGS / USB DEBUGGING
GO INTO "SETTINGS -> GEAR INFO -> ABOUT GEAR", TAP SOFTWARE VERSION 10 TIMES.
ENABLE UNKNOWN SOURCE APK INSTALLATION
GO INTO "FULL SETTINGS -> SECURITY -> TICK UNKNOWN SOURCES".
ENABLE MTP
GO INTO "FULL SETTINGS -> STORAGE -> MENU BUTTON (TOP RIGHT OF SCREEN) -> USB COMPUTER CONNECTION -> MEDIA DEVICE (MTP)".
WATCH STYLER NOT WORKING
ENSURE ITS SELECTED AS THE DEFAULT WATCHFACE IN GEAR MANAGER.
IF CLOCK FACE DOES NOT UPDATE UPON CHANGING, RESTART GEAR.
DOUBLE CLICK HOME BUTTON DOESNT WORK ON TOUCHWIZ LAUNCHER !
*NOTE* DO NOT DO THE FOLLOWING IF YOU ARE USING NOVALAUNCHER, YOU WILL NOT BE ABLE TO MANUALLY LOCK YOUR GEAR.
*NOTE 2* YOU CAN SIMPLY REFLASH THE ROM WITHOUT WIPING AND DISABLE THE HOME BUTTON REMAP MOD.
NAVIGATE/PULL THE FOLLOWING FILE FROM YOUR GEAR: /SYSTEM/USR/KEYLAYOUT/GPIO-KEYS.XML
EDIT IN A TEXT EDITOR SO IT LOOKS LIKE THE BELOW:
Code:
key 115 VOLUME_UP WAKE
key 114 VOLUME_DOWN WAKE
key 116 POWER WAKE
[B]key 172 HOME WAKE[/B]
edit
Amazing. This thread is very much needed song as how the dev thread keeps getting cluttered with posts that wouldn't be there if some one would have read
sent from my Note 3 or Galaxy Gear
Yeah this thread is an awesome idea to leave the general discussion and support issues out of the other thread.
Whenever I select "recovery" it doesn't give me an option to install the rom?
I followed the steps for the root and the add the .zip to my SD card on the phone. When I select the option for recovery it just does a system restore on it. Any help?
You need to flash twrp first
sent from my Note 3 or Galaxy Gear
feature request
[what about to include support fpr AquaMail client?
I'm using it and I think it is the better at the moment
The developer could be interesting....
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Pepski said:
Just a quick (somewhat noob) enquiry about the Gear and what this ROM can do for it, as I'm thinking of picking up a Note3 + Gear from work (Vodafone), as the watch is free.
Firstly, I hate Touchwiz with a passion! I don't wish for anyone to read that in an angry way, but I'm really not fond of the colours, themeing, etc. of that particular UI. I much prefer vanilla Android and, as such, would look to root the Note3 and install CM or an equivalent on it.
Would I then lose any functionality of the Gear? Can the GearManager APK be installed on a non-TW ROM?
I'll need a bit of an idiot's guide for the whole thing, but it's nothing I can't research.
Click to expand...
Click to collapse
No. Sadly not.
Or at least not with all the bells and whistles working.
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
ktetreault14 said:
I actually am testing CM11 on my note 3 as I type. I was wondering if someone could link me to the latest gear manager so I could test how it works.
Sent from my Note 3 w/ CM11
Click to expand...
Click to collapse
Here's 2 versions. The latest and the previous one, a lot of people are having problems with the latest, and even Samsung supposedly admitted it was bugged and they were going to release a new one. The previous version seems to work fine for people, and there's no real functional updates on the latest one anyway, so you might prefer it.
Latest version - 1.5.121601
Previous version - 1.5.120903
I couldn't get cm11 to download the necessary apks for gear manager so I restored a tw backup and backed up the apks themselves. When I went to restore them the only ones that would not restore were the weather and svoice. It is paired now with gear manager running in the notifications. Still testing out what works and what doesn't
Sent from my Note 3 w/ CM11
Running 16, removed Ms. Pac-Man for running too slow on the Gear, everything's running smooth.
Sent from Spaceball One.
I have nexus 5 rooted and running null16, could anyone please point me out how to make gear manager to work?has anyone made notifications work? so far i can just make calls from it and syncs the time.I have read everywhere but nothing works so far and i can't seem to find a reliable sorce of information. If we could make something like an app and null to be modified to work with that so we lose gear manager dependency i belive that would be a game changer . Fomey i will donate something pretty soon as i allways apreciate work from people creative like yourself .
EDIT: 15 AUD for you Fomey, thank you for your work !
reboot after install of null_16
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Read.
ernie36564 said:
i have attempted several times now to install the null_16 on my galaxy gear. after each time i attempt to go into the recovery mode to actually install it, it reboots and resets the device. i have read numerous times to flash the null_03_TWRP2.7.tar.md5 file and i have done this with odin and received a pass at the top left of the odin program and then it reboots the galaxy gear. i then install the null_16 file on the root of the sd card directory with wondershare mobilego (left zipped as noted in several videos i have watched) after this i remove device from charging device and this is when i try to go to recovery modeto install. after getting to recovery and holding power button for approximately 3 seconds and release this is when it reboots and has reset itself. any help would greatly be appreciated and yes it is rooted with supersu. I am sure i am doing something wrong but not sure what.
Click to expand...
Click to collapse
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
eroracing said:
Download mk7 for your country.... I don't care if you are already on it just do it! Flash with Odin then flash twrp recovery..... Use adb to boot to recovery....... Trust me it works!
Sent from my Note 3 SM-N900A rooted by Designgears
Click to expand...
Click to collapse
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
almulder1092 said:
Installing Null_ TWRP: (Version as of this tutorial is Null_ 03 TWRP)
Thanks to fOmey for this Null_ TWRP
Installing Null_ TWRP:
Preparation:
Download Null_ TWRP - fOmey
READ THE NULL_ TWRP Original Post
Installation:
Put your Gear into Download Mode
Connect your Gear to you PC.
Open Odin
Click on the PDA Button
Locate the Null_ TWRP file and select it. (It should be a .md5 file, if it is zipped, then unzip it)
Press Start
Once it is completed it will reboot the gear.
Null Quote:
If you find the recovery is not sticking & your Gear wipes when attempting to access recovery after flashing, you must root your Gear prior to installing TWRP again & Run the following commands in ADB:
*NOTE* You will gave to accept a supersuser request popup when executing "SU" command
*NOTE 2* Probably a good idea to run this prior to first installation (To save time)
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
ADB stands for Android Debug Bridge
If needed "ADB" can be found here on xda - Thanks to shimp208
.[/CENTER]
Click to expand...
Click to collapse
gypsydigi said:
OMG i got it running!
thanks so much for all the work done with this rom... Everything seems to be running perfect...
At first i couldn't get it to flash properly... I was trying everything. Took hours to initially get the recovery going. It ended up being a driver issue and after a lot of reading and troubleshooting i was finally able to get it up and running.
One question that i have that i couldn't find the answer too... Is there any way to have the watch widget (either the stock clocks or watch styler) appear as a full screen widget without the launcher or the status bar at the top... yet keep the status bar and launcher on the other pages? I am assuming that i can't do it after reading countless of pages... Because i do like the full screen watch face.
Thanks again for all the hard work!
---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------
I had to follow this step in order to get the recovery to stick. No matter what i did including flashing the stock recovery then flashing twrp i couldnt get it going until i did this:
Click to expand...
Click to collapse
You cannot do what you are asking.... But you can set clock widget. Use Nova settings to hide notification bar, dock and scroll indicators then use gesture and button settings to create gesture to accommodate just about anything! I have swype down to open notification bar..... Swipe up open notification app.... Double tap opens app drawer and 2 finger Swipe up opens my dialer! Just set widget long press and resize to full screen. You may have to adjust colums and rows in Nova settings to accommodate whatever widget you are using in order to center properly. Hope this helps!
Sent from my Note 3 SM-N900A rooted by Designgears
On the newest release (16) there is support for custom boot animation and includes the null boot animation. Is that a part of the aroma installer or is the custom null boot animation a part of the rom that you cannot remove? I'd rather stick with the stock if you don't mind.
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
Requirements:
Flashtool 0.9.15.0
Rooted SGP311 (on any Android version up to and including 4.4.2) with custom recovery installed.
If you do not meet these conditions, for example, if you are on an unrooted system, here is a guide to get you on a rooted 4.1.2 with recovery:
http://forum.xda-developers.com/showpost.php?p=53063218&postcount=14
This works on locked or unlocked bootloaders. This also works on any customization.
The procedure should work with any pre-rooted Android version but I started with 10.1.C.0.370 (4.1.2) which was rooted with DooMLoRD_Easy-Rooting-Toolkit_v17, patched with remountrebootfix, and equipped with XZDualRecovery.
Limitations:
This process can delete the files on your internal SDcard so back them up. Also, you will have to reinstall all your apps, as they get erased too.
Download link:
Mega
https://mega.co.nz/#F!UkshjY6A!HIW7xGf1E1oa04e0N3b1OA
You only need the zip and ftf files. The txt file is just the checksum if you want to verify that your download is error-free. I strongly recommend that you do the checksum before flashing.
Instructions:
1- Backup before you start messing with your tablet!
2- Put system.flashable.zip in /sdcard of your tablet.
3- Keep SGP311_10.4.1.B.0.109_R2C_VMo_US_CA_PR_NoSystem.ftf on your PC.
4- Disconnect any USB cable that may be attached to your tablet.
5- Reboot to recovery. Preferably to TWRP, but you can make CWM work too.
6- Do not wipe anything.
7- Once in recovery, flash system.flashable.zip.
8- It is important to NOT REBOOT the tablet after this step.
9- Find and use the Power Off option in the recovery and turn your tablet off. In CWM based PhilZ Touch it is under "Power Options" -> "Power Off". In TWRP it is under "Reboot" -> "Power Off". If you see your tablet rebooting, force it to turn off by pushing the power and volume up keys simultaneously (or however else you can!)
10- Open Flashtool 0.9.15.0 and click on the flash icon. Choose flash mode.
11- Navigate to where you have saved SGP311_10.4.1.B.0.109_R2C_VMo_US_CA_PR_NoSystem.ftf and flash this ftf with your tablet in flash mode. To put your tablet in flash mode, hold the volume down button when it is off and connect with the USB cable to the PC.
12- Reboot and enjoy!
Credits:
I only put the files together. All the credit should go to XDA's [NUT] and DooMLoRD and many others...
I had a few requests from people who upgraded to 4.4 and were not happy with the speed. So I made these file in case you want to downgrade to rooted 4.3.
Enjoy.
Downloading now. Thanks!
hi njajoor
thanks to your guides i was able to flash in quick an easy way all the procedure was smooth.
may i kinow how did you tewk your rooted 4.3 rom or which settings do you recommend to improve the performance of the tab Z?
many thanks again
mame3876 said:
hi njajoor
thanks to your guides i was able to flash in quick an easy way all the procedure was smooth.
may i kinow how did you tewk your rooted 4.3 rom or which settings do you recommend to improve the performance of the tab Z?
many thanks again
Click to expand...
Click to collapse
This is what I do normally, but you may want to change it for you specific needs:
1- In settings:
Wifi, menu, advanced, network notification unchecked; Keep wifi on never; wifi optimization checked
NFC off
Sound, touch sound off; screen lock sound off
Display, sleep after 30 seconds, double tap to wake up checked, brightness set to lowest
Power management, stamina mode on
Keyboard, sounds feedback, sound on key press unchecked
Accounts, email: set sync frequency to 1 hour; Skype: sync off
2- install adaway
3- use titanium backup pro or apps tab in settings to freeze/disable:
Crackle and Netflix (unless you use them)
Anything with the word or logo of Facebook or twitter or social engine in it. You are better off using the browser for these.
If you use both email and Gmail apps, disable Gmail and set it up in email app.
All Google play apps except store and Services
Google plus and hangout
McAfee, reader by Sony, let's start psm, video unlimited, wisepilot
Mobile date, mobile network, sim lock, and sim toolkit (sgp311 doesn't have mobile data)
PO Box touch and Xperia Chinese keyboard (this may significantly reduce your keyboard flickering if not entirely eliminate it)
4- I install greenify, wakelock detector and juice defender on my other Android devices but I've come to believe Sony's stamina does an excellent job and none of that is necessary.
5- Turn gps on only when you use it
6- Remove active widgets from your home screen. I only have the clock and the weather left. If you want to keep the widgets put them on a separate display than the ones you keep your commonly used icons in.
With these settings mine is smooth as butter. I hope yours will be too.
You will need to ROOT the Nexus 6P (Android N DP4) so that you can make the required changes to the build.prop file. *NOTE: This process will work on systemless root
Nexus 6P Disable Navigation Bar
1. Download the Build Prop Editor Application
2. Launch the Build Prop Editor App
3. If Prompted, Let the Application Have Root Access via SuperSU
4. Tap the Pencil Icon at the Bottom(or the 3-dot menu at the top right and then tap on edit)
5. Scroll All the Way Down to the Bottom of the Build.Prop File
6. Create a New Line at the End of the File
7. Then Type or Paste the Following Text. . .
8. " qemu.hw.mainkeys = 1 "
9. Then Press the Save/Disk Icon at the Top Right
10. If Prompted, Grant Root Access to the Application Again
11. Wait for the ‘Build Prop Saved’ Toast Message to Appear at the Bottom
12. Press the Home Button to Close the Application
13. Then Reboot the Nexus 6P
Navbar Replacement Apps:
-Swipe Navigation
-GMD GestureContol Lite
FYI - Using this method also disables Google now...
I would be suggest removing navigation bar using the layers loophole used by swipe navigation
djide01 said:
FYI - Using this method also disables Google now...
I would be suggest removing navigation bar using the layers loophole used by swipe navigation
Click to expand...
Click to collapse
Does "Swipe navigation" trick work on Android N ? Any other ways to do it on nougat ?
coolsid8 said:
Does "Swipe navigation" trick work on Android N ? Any other ways to do it on nougat ?
Click to expand...
Click to collapse
No it does not. I'm also looking for an alternate method. Had it running for awhile on Nougat official release, but if I accidentally long-pressed on any of my Swipe Navigation attempts, it would stop working and I'd be stuck in whatever app I was using. Having to shut down and reboot to get home is not ideal.
it removes the navbar but it also breaks my camera. suggestions?
edit; I fixed it using this mod I only had assistant enabled in the aroma installer http://forum.xda-developers.com/one...r-pixel-launcher-t3492677/page27#post70291365
Suggestions
yakie996 said:
it removes the navbar but it also breaks my camera. suggestions?
edit; I fixed it using this mod I only had assistant enabled in the aroma installer http://forum.xda-developers.com/one...r-pixel-launcher-t3492677/page27#post70291365
Click to expand...
Click to collapse
I see you too had this issue on your moto x style , of the two zip's given which one should I use for my stock 7.0 x style
This methode use to work on my phone prior of Android O. But it completely break my system if when I tried on O DP1-2-3. It wont let me rebooting at all, goes directly in recovery and have to reflash system. I know the thread is concerning N and not O but wondering if anyone would have advise
Is there any other way of removing the nav bar ? I tried substratum to set the size to 0 but that won't work either
You can use a custom ROM, like Pure Nexus.
t4rdif said:
This methode use to work on my phone prior of Android O. But it completely break my system if when I tried on O DP1-2-3. It wont let me rebooting at all, goes directly in recovery and have to reflash system. I know the thread is concerning N and not O but wondering if anyone would have advise
Is there any other way of removing the nav bar ? I tried substratum to set the size to 0 but that won't work either
Click to expand...
Click to collapse
https://forum.xda-developers.com/nexus-6p/general/guide-hide-navigation-bar-status-bar-app-t3509747
coremania said:
https://forum.xda-developers.com/nexus-6p/general/guide-hide-navigation-bar-status-bar-app-t3509747
Click to expand...
Click to collapse
Immersive mode is one way of doing it but I personally hate it. Swiping the bottom of the screen will bring back the nav bar. When hidden the keyboard won't show. Plus it still doesn't give you back the screenestate, it is simply replaced with a black bar.
Custom ROM like Pure Nexus have the option because they are running N. The build prop mod use to work prior of O. Hope there will be a way of getting rid of that nav bar ! #givemebackpie
t4rdif said:
Immersive mode is one way of doing it but I personally hate it. Swiping the bottom of the screen will bring back the nav bar. When hidden the keyboard won't show. Plus it still doesn't give you back the screenestate, it is simply replaced with a black bar.
Custom ROM like Pure Nexus have the option because they are running N. The build prop mod use to work prior of O. Hope there will be a way of getting rid of that nav bar ! #givemebackpie
Click to expand...
Click to collapse
Ok, that's personal taste, I do prefer immersive with transparent navbar.
does it also work on Oreo
Currently my nexus 6P is running Oreo, I use the root explorer to add qemu.hw.mainkeys = 1 on Build Pro File, but it turned out bad, my whole system collapsed and I have to reflash the OS. Will this app work in Oreo? Many thanks.
Worked for z5 premium dual 6833 nougat 7.1.2 mokee. and stock sony 7.1.1 different firmwares.
Tnx
This method does not apply to my cell phone，android7.0，EMUI 5.0.1 OS。
So People While Having A Non-Nexus Device(Actually a Motorola One) I Wanted To Try a the Latest Version Of Nougat On My Phone Right Of The Bat So With A Bit Of Googling And Xdaing(Searching In XDA????) I Found The Way To Make Your Phone Look Like Android 7.0.
This Tutorial Just Customizes Your Phone From A Cosmetic Point Of View. Nothing Is Changed Internally!
So The Requirements Are :
1. An android Phone
2.Root Access
3.Xposed
4.Android N-ify
5.Nexus Launcher
6.Nougat Navigation Bar Module
7.Custom Recovery(optional)
And That's It!
Procedure: So The Thing Is Pretty Much Explanatory So Here It Goes :
Assuming You Got An Android Phone Having Root Access And Exposed Installed,
Go In the Downloads Section Of the Xposed App,
Type "Android N-ify" Then Download It From There,Install It,Activate It(But Don't Reboot). Now Download "Nougat Navigation",Install It,Activate It And Now Reboot.
Now For The The Leaked Version Of The "Nexus" (Yeah Nexus) Launcher :-
1.Assuming That You Have a Custom Recovery,Just Flash The Zip Provided.
2.If You Don't Have Any Custom Recovery Then Unzip The Zip,Copy The App Into /System/app and CHmod It To 644 .
But The Problem Is That Those Thirsty For The Swipe Left To "Google Now" Won't Get this Feature The Method 2.
Have Fun With The Nexus Feel Of Nougat!
Episode 2 Coming!
There's no touch disable mode since Oreo update.
Anyone experience same problem?
Sent from my VTR-L29 using Tapatalk
Yes... looking for solution for about a week. We need a hw_XXX entry for that feature to enable it.
It´s like font chooser, which you can enable by adb with this command "adb shell settings put system hw_hide_font_style false".
did you find the solution?
DarkHorse said:
did you find the solution?
Click to expand...
Click to collapse
nope. I would need at least honor 7x getprop command result.
DallasCZ said:
nope. I would need at least honor 7x getprop command result.
Click to expand...
Click to collapse
Want my result from P10 Lite EMUI 8 Android Oreo?
I talked to Huawei support on facebook and they told me that:
"Hello, in Android 8 Touch-disable mode is enabled by default and can not be turned off. Best regards"
So i asked is it unavailable to disable it by ADB too:
"Unfortunately, this function has stopped being editable on Android Oreo"
I don't know what to think about this...
surma1231 said:
Want my result from P10 Lite EMUI 8 Android Oreo?
I talked to Huawei support on facebook and they told me that:
"Hello, in Android 8 Touch-disable mode is enabled by default and can not be turned off. Best regards"
So i asked is it unavailable to disable it by ADB too:
"Unfortunately, this function has stopped being editable on Android Oreo"
I don't know what to think about this...
Click to expand...
Click to collapse
I think it is in emui somewhere.. same as honor 7x has DT2W/DT2S (double tap to wake/sleep) mode. It is about to find the proper command to enable/disable it. Same as function to turn on font chooser (whjich was on emui hidden since version 5 or 6). It is still possible to enable the font chooser by adb shell command (in settings/display there will show an option to choose font). Of course it is useless now, because font chooser is in theme app and also accessible trough long press on themeapp icon. but still this function is in EMUI8 and was disabled in EMUI6. So i think all the features of various huawei/honor devices are in all EMUI8 firmwares but we have to find how to enable/disable them.
1- by looking into system/build.prop or system/vendor/build.prop (the old way, not so much used by Huawei these days)
2- by looking and comparing getprop results across various Huawei honor devices
3- by reverse ingeneering the settings.apk and other main apk files (need lot of time for this).
I did this three steps on various models i had and found lot of features that wass disabled/hidden, or was for high end devices and in my device firmware were disabled.
Would be great to have getprop result and build. prop files from a huawei/honor device which still has TOUCH DISABLE MODE option in settings acessibility.
DallasCZ said:
I think it is in emui somewhere.. same as honor 7x has DT2W/DT2S (double tap to wake/sleep) mode. It is about to find the proper command to enable/disable it. Same as function to turn on font chooser (whjich was on emui hidden since version 5 or 6). It is still possible to enable the font chooser by adb shell command (in settings/display there will show an option to choose font). Of course it is useless now, because font chooser is in theme app and also accessible trough long press on themeapp icon. but still this function is in EMUI8 and was disabled in EMUI6. So i think all the features of various huawei/honor devices are in all EMUI8 firmwares but we have to find how to enable/disable them.
1- by looking into system/build.prop or system/vendor/build.prop (the old way, not so much used by Huawei these days)
2- by looking and comparing getprop results across various Huawei honor devices
3- by reverse ingeneering the settings.apk and other main apk files (need lot of time for this).
I did this three steps on various models i had and found lot of features that wass disabled/hidden, or was for high end devices and in my device firmware were disabled.
Would be great to have getprop result and build. prop files from a huawei/honor device which still has TOUCH DISABLE MODE option in settings acessibility.
Click to expand...
Click to collapse
Okay, i started to searching for peoples who have access to build.prop and can send the getprop result UNDER EMUI 8.
surma1231 said:
Okay, i started to searching for peoples who have access to build.prop and can send the getprop result UNDER EMUI 8.
Click to expand...
Click to collapse
it can be also emui5.. just the device should have the desired option enabled.
DallasCZ said:
it can be also emui5.. just the device should have the desired option enabled.
Click to expand...
Click to collapse
Already got P9 Lite EMUI 5.0.3
getprop result
EDIT #1: Second getprop -> Result
No need for build prop or to be rooted.
I just found the solution. Hallelujah!
Download the Settings Database Editor app on Google Play:
https://play.google.com/store/apps/details?id=by4a.setedit22
In the System Table screen, scroll down to the bottom towards the 'T' section and find "Touch Disable Mode 1". Tap on it and change it to 0 to turn it off and hit save.
Please thank if it works for you ?
tboy2000 said:
No need for build prop or to be rooted.
I just found the solution. Hallelujah!
Download the Settings Database Editor app on Google Play:
https://play.google.com/store/apps/details?id=by4a.setedit22
In the System Table screen, scroll down to the bottom towards the 'T' section and find "Touch Disable Mode 1". Tap on it and change it to 0 to turn it off and hit save.
Please thank if it works for you
Click to expand...
Click to collapse
Dude, it works!!! Huawei P10 Lite EMUI 8.0.0 Beta Android 8.0