hello, i need help
i rebranded a PRA-LA1 to PRA-LX1 and downloaded the official rom thru erecovery.
i wanted to backup my rom, so i
unlocked bootloader
flash twrp
enter twrp and backup the rom
i flashed stock rom, and relocked bootloader.
now am stuck at factory reset 99%
fastboot, rescue mode and dload wont work.
i let the battery discharge, and when i put it into charge, it boots to system but when i type the pin to enter, it reboots into factory reset 99%.
how to solve that problem ??
Related
Hey all. I was trying to rollback my P9 to a stock ROM, but it failed and now I am stuck with a bricked P9 (bootloop).
My phone is a European P9 (EVA-L09C432). I have an unlocked bootloader.
- Huawei eRecovery and HiSuite restore does not work.
- I've tried forcing the update using the SRK Tool brick utility, but receive the message "FAILED (remote: sparse flash write failure)" when it's strats writing 'system'.
- My TWRP backup does not work, I had a 7GB backup that installs fine, but the phone is still stuck in a bootloop.
- I can flash EVA-L09C432B378 ROM using the SRK brick utility fine, but the phone is still stuck in a bootloop.
- After I have installed B378 and try to force flash B136 using the dload method, it either gets stuck on the "going into restore mode" or it goes to the "installing package" screen, where it is stuck at 5% until it reboots.
Any suggestions?
try one more time install rollback package by download mode
I've tried. Several times, all day :crying: My process:
Write TWRP from fastboot so I can boot into TWRP and transer UPDATE.app to the dload folder
Reboot into fastboot
Write stock recovery image from fastboot
Boot into recovery mode
Get stuck at 5% on the "Installing update" screen.
I've tried the UPDATE.app or firmware B136 (stock), and UPDATE.app for B378 (Nougat)
Both get stuck at 5%.
I'm stuck at the bootloop
isn't srk tool only for MM?
maybe try extract recovery , boot and system partition from b378 and flash by fastboot , next start flash rollback package by download mode
I noticed when I tried to restore my backup using TWRP it failed at "vendor" (Failed to wipe vendor). I receive this issue at vendor and product.
I tried using fastboot to flash vendor and product manually, I receive these error messages:
"failed: remote command not allowed"
The phone won't allow me to write vendor and product.img... but my bootloader was unlocked?
Is it possible I could have relocked my bootloader? How am I supposed to get the bootloader code for my P9 again :/ It's nearly impossible.
I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.
Highfall said:
I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.
Click to expand...
Click to collapse
I'm having similar issues. Have you solved your problem? What have you tried so far?
Same problem here! Did you resolve?
Thanks you.
Try unplug charger or usb cable then do it
WTF, that ist the solution to the whole damn problem! Just unplugging the damn usb cable and it installs the update just fine. ive spend 2 whole days on this, almost giving it up beacuse everytime it got stuck at 5% and then this...
seriously thank you!
JimmyEatFood said:
Try unplug charger or usb cable then do it
Click to expand...
Click to collapse
thx i managed to boot my device, but i relocked bootloader and factory reset doesnt work correctly it deleted 3rd party apps and leaved few system apps and blotware. what should i do.
and really thanks, you saved me.
Removing cabled worked for me also
Hi, i managed to brick my p9 eva-l19, i was having the stock rom with the latest update, bootloader unlocked, twrp, rooted and i managed to brick him by wiping all. Now all it does is entering in bootloader mode, recovery (twrp) and that's it. I downloaded the stock rom with the latest update, put the update.app on an sdcard but it doesn't work in download mode, the update is not made, error.
What i have to do to unbrick my phone? i'm sure this question has been asked a lot of times but i didn't find a good answer.
When you downloaded the stock rom you got a update.zip and a full_data.zip (or something along these lines). Just Install them via TWRP ( VERY IMPORTANT: first update.zip and then full_data.zip). after that go back and wipe chache and dalvik, then go in the main menu of twrp and klick on reboot and then on recovery. You should boot into stock recovery where you need to wipe cache and do a factory reset. You should boot into stock firmware
Hello Everyone,
I tried to revive my P8 Lite 2017 and it's impossible. I followed every guide I found but anything work for me.
I have access to bootloader also recovery.
erecovery not working, fail when try to download.
recovery not working factory reset stock at 99%
bootloader I can flash but maybe i didn't find the right firmware.
The version I had was PRA-LX140B105.
More information.
I deleted some picture so I tried to recover this photo so I used undeleter, diskdigger and these app said if you're rooted you have more change to find things.
I rooted the phone and when I used this apps, wanted to come back to factory so I flashed supposedly a stock rom from firmware finder huawei. I flashed boot, recovery and system. The first time I boot stuck on your device is booting now, after that i swith off my phone and tried recovery I do wipe cache also wipe data and factory reset then again 99%. I swith off again my phone start again the factory reset by itselft and then say completed, phone reboot and then i see the animation and stuck on huawei logo after that reboot by itselft and then open erecovery. Again I Turn off phone try to swith on and stuck on your device is booting now..
I don't know what more I can do.
I tried to put update.app inside dload folder in sd card but it fails
flash TWRP, restore this https://mega.nz/#!vspAXIZI!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo in TWRP, flash stock recovery, update to the newest firmware, do a factory reset and flash a recovery of your choice.
to get the backup to work, first create a random backup in TWRP then go to TWRP/BACKUPS/*random numbers* and put the downloaded backup there
How to root this big brick?! Damn huawei site not allows me to login! Need root bcs of few apps dmn **** nobody dont know and dont want to help me here???
thebdl said:
Hello Everyone,
I tried to revive my P8 Lite 2017 and it's impossible. I followed every guide I found but anything work for me.
I have access to bootloader also recovery.
erecovery not working, fail when try to download.
recovery not working factory reset stock at 99%
bootloader I can flash but maybe i didn't find the right firmware.
The version I had was PRA-LX140B105.
More information.
I deleted some picture so I tried to recover this photo so I used undeleter, diskdigger and these app said if you're rooted you have more change to find things.
I rooted the phone and when I used this apps, wanted to come back to factory so I flashed supposedly a stock rom from firmware finder huawei. I flashed boot, recovery and system. The first time I boot stuck on your device is booting now, after that i swith off my phone and tried recovery I do wipe cache also wipe data and factory reset then again 99%. I swith off again my phone start again the factory reset by itselft and then say completed, phone reboot and then i see the animation and stuck on huawei logo after that reboot by itselft and then open erecovery. Again I Turn off phone try to swith on and stuck on your device is booting now..
I don't know what more I can do.
I tried to put update.app inside dload folder in sd card but it fails
Click to expand...
Click to collapse
You can use DC-Phoenix to restore your device.
Hey... how can I help you man?
Hi guys, I need your backup of your P10 to unbrick mine.
Short story: I have update xposed v90 then the phone bootloop, I have try a recovery but it was a Nugat recovery, then now my phone still want to boot on Erecovery that did'nt work for me. SO Your backup could probably save my phone. I have try to install the Stock firmware, nothing to do
Probably best off paying to use Dc Phoenix to unbrick your phone. That's what i had to do ?
If u have unlocked bootloader try to unbrick phone by flashing system via fastboot, like in that guide https://forum.xda-developers.com/p10/how-to/how-to-unbrick-p10-fail-wipe-tutorial-t3666659
I tried to root my huawei p9 earlier on this year.I got my bootloader unlocked before flashing twrp.Then I decided to install custom rom to root it.I wiped made a full system wipe before flashing resurrection remix and gapps and supersu.Somehow my huawei p9 got into a bootloop.I decided to flash back to stock through fastboot method (flashing every file one by one through cmd.)Since then,my huawei p9 got stuck in a hard brick. Only can boot into fastboot and rescue mode using volume down and power button.But no recovery at all.I thought I still had warranty and u managed to lock back the bootloader.Yet,the warranty period was over.Cant get to huawei repair centre.I also tried to flash stock firmware using UPDATE app in SD card but to no avail.Volume +,-,power button does not work.All it does is reboot and get stuck in huawei logo.Any developers know how to fix this dead phone?I'm using huawei p9,Eva-L19.Thanks!
it happened to me, pretty much same thing, i flashed back to the original firmware and fixed it, it has to be the same firmware, not newer or older