Related
Hey all,
I figure this is probably a dumb question, but I'm looking for a way to swap my soft key menu and back buttons.
I just switched from CM to Stock so I could use Project Fi, and I'm missing that much more than expected.
I saw a flashable zip that will switch them, but it doesn't work on 5.1.1 (probably should have read that before trying it....)
Any luck with doing this? What are the ramifications of making this change in regards to getting OTA updates?
Guyanthalas said:
Hey all,
I figure this is probably a dumb question, but I'm looking for a way to swap my soft key menu and back buttons.
I just switched from CM to Stock so I could use Project Fi, and I'm missing that much more than expected.
I saw a flashable zip that will switch them, but it doesn't work on 5.1.1 (probably should have read that before trying it....)
Any luck with doing this? What are the ramifications of making this change in regards to getting OTA updates?
Click to expand...
Click to collapse
Try Pure Nexus ROM. Has those options built in and is optimized for Fi.
Guyanthalas said:
Hey all,
I figure this is probably a dumb question, but I'm looking for a way to swap my soft key menu and back buttons.
I just switched from CM to Stock so I could use Project Fi, and I'm missing that much more than expected.
I saw a flashable zip that will switch them, but it doesn't work on 5.1.1 (probably should have read that before trying it....)
Any luck with doing this? What are the ramifications of making this change in regards to getting OTA updates?
Click to expand...
Click to collapse
If your phone is rooted, use ultimate dynamic navbar. Search xda for apk. With that app, you can customize it the way you want.
Sent from my Nexus 6 using XDA Free mobile app
Maybe I should make a new thread for this, but I'll give this a go first (for less clutter).
I used pure nexus. Totally amazing rom, love it. Got the new version, (this one has a new custom settings option), but I can't find the option for the soft keys. Maybe it isn't implemented yet, but I thought I'd ask incase I was just blind.
Thanks!
Hello all. Here is little tool which gonna block all the annoying ads on your Redmi 2 ( may be other Xiaomi devices too ). This tool doesn't need any Pc , root or custom recovery. Flash the tool in Stock Recovery and you Rock.
Procedure:
1. Go to settings>about phone>system updates.
2. Tap three dots in top right corner and choose update package.
3. Navigate to the Ad Blocker.zip and tap it.
4. Your phone will reboot and all ads will be blocked on your device.
Unblocking Procedure:
1. Go to settings>about phone>system updates.
2. Tap three dots in top right corner and choose update package.
3. Navigate to the Ad Restore.zip and tap it.
4. Your phone will reboot and all ads will be unblocked on your device.
Note: This tool is created and tested by me on Redmi 2 prime, may also work on other Xiaomi devices too.
Google Drive Link
Please Hit Thanks Button
Cheers, works perfectly on Redmi 2 Prime
Xperia keyboard
lr7745 said:
Cheers, works perfectly on Redmi 2 Prime
Click to expand...
Click to collapse
Welcome bro, you will like my Xperia Keyboard as well
the hosts file is created by lucky patcher,xda doesn't like lucky patcher,better edit the hosts file.
Thanks, but is there anyway to give this a toggle?
Also how do I revert this?
two ways
~TheBasics~ said:
Thanks, but is there anyway to give this a toggle?
Also how do I revert this?
Click to expand...
Click to collapse
1. If you are rooted then simply replace the /system/etc/hosts file with one included in stock rom.
2. If not rooted then you will need flashable zip file for that. I'll create one tomorrow and will upload here.
rkmadotra said:
1. If you are rooted then simply replace the /system/etc/hosts file with one included in stock rom.
2. If not rooted then you will need flashable zip file for that. I'll create one tomorrow and will upload here.
Click to expand...
Click to collapse
Thanks a lot!
It really does work but some just get through like those on the Leo Master app, is there any way that you could add them as well so that they're blocked as well?
I would really appreciate that a lot... It's really annoying but I can understand if you don't want to do it as well, in that case could you please guide me on how to do it?
P.S I'm a noob, but I'll try my best to learn.
~TheBasics~ said:
Thanks a lot!
It really does work but some just get through like those on the Leo Master app, is there any way that you could add them as well so that they're blocked as well?
I would really appreciate that a lot... It's really annoying but I can understand if you don't want to do it as well, in that case could you please guide me on how to do it?
P.S I'm a noob, but I'll try my best to learn.
Click to expand...
Click to collapse
Ads Unblocking procedure is uploaded. and about Leo master app, i don't have time theses days, i'll look into this later on.
rkmadotra said:
Ads Unblocking procedure is uploaded. and about Leo master app, i don't have time theses days, i'll look into this later on.
Click to expand...
Click to collapse
Appreciate it, and please take your time It can wait... At least you fullfiled one of my requests.
Also it seems that Ads work on Asphalt 8 as well.
Again, Thanks!
Mi5 and Redmi Note 4 Compatibility
rkmadotra said:
Hello all. Here is little tool which gonna block all the annoying ads on your Redmi 2 ( may be other Xiaomi devices too ). This tool doesn't need any Pc , root or custom recovery. Flash the tool in Stock Recovery and you Rock.
Procedure:
1. Go to settings>about phone>system updates.
2. Tap three dots in top right corner and choose update package.
3. Navigate to the Ad Blocker.zip and tap it.
4. Your phone will reboot and all ads will be blocked on your device.
Unblocking Procedure:
1. Go to settings>about phone>system updates.
2. Tap three dots in top right corner and choose update package.
3. Navigate to the Ad Restore.zip and tap it.
4. Your phone will reboot and all ads will be unblocked on your device.
Note: This tool is created and tested by me on Redmi 2 prime, may also work on other Xiaomi devices too.
Google Drive Link
Please Hit Thanks Button
Click to expand...
Click to collapse
Hello, firstly congratulations for this very useful post!
Can you tell us if this method is safe to use with Xiaomi Mi5 and Xiaomi Redmi Note 4 phones? Thanks
fabioschmidt said:
Hello, firstly congratulations for this very useful post!
Can you tell us if this method is safe to use with Xiaomi Mi5 and Xiaomi Redmi Note 4 phones? Thanks
Click to expand...
Click to collapse
Same question for redmi note 4 here. want to block ads without root. Thanks.
arindam4u said:
Same question for redmi note 4 here. want to block ads without root. Thanks.
Click to expand...
Click to collapse
Yes u can flash this on Redmi note 4 and I have checked it personally it works with my friends phone perfectly but in some apps you may get ads asusual.
jakir69 said:
Yes u can flash this on Redmi note 4 and I have checked it personally it works with my friends phone perfectly but in some apps you may get ads asusual.
Click to expand...
Click to collapse
But I can't flash it via system update.
Won't work
This will not work with locked bootloader
I tried flashing that zip file on Redmi Note 4. Got the same error as arindam4u. Bootloader is unlocked! Any idea? ;-(
can i use this with one plus 5 ? with unlocked bootloader ?
it's still work on miui 9, thank u so much :*
Worked 100% on DotOS 7.1.2. Thank you so much!
MI6
rkmadotra said:
Welcome bro, you will like my Xperia Keyboard as well
Click to expand...
Click to collapse
Hi, I have a xiaomi MI6. Do You think I can safely try it out? It has MIUI 9 on it.
bejczyp said:
Hi, I have a xiaomi MI6. Do You think I can safely try it out? It has MIUI 9 on it.
Click to expand...
Click to collapse
Yeah
Hello !
I have some question, hope that you can help me.
1. I want to install the Xposed module but i want to knw if it's stable on the Mi Mix ROM.
I'm asking that because i came from a Xperia Z Ultra and the Xposed module wasn't that stable...
2. I want to change of ROM, how can i perform a clean install and kepp my actual apps, is there a way ?
ANNEXE : I encounter some issue on my Xiaomi eu ROM, hope you can help me to find something
Here is my problem :
1 - The first one is my fingerprint sensors works 1/2 on the lockscreen, it's like that since the stable update of the 14 jun 2017. You need to know that the fingerprint sensor works well for unlocking app and else..
2 - The research function doesn't work at all, I have an error (cf : video). whatever the choices that i make the problem will still the same...
Can you please help me ??
Best Regards,
LordBli
Sorry, I wish I could help. I to want to root my device so that I can flash custom roms too, but I've all but given up on that. I don't know why you mean though, when it comes to your second question -
"The research function doesn't work at all, I have an error (cf : video). whatever the choices that i make the problem will still the same..."
Xposed works great on MIUI 8 (8.5) (Android 6)
If u want keep MIUI or change ROM to pure android :
Universal method >
1 - Titanium backup 'but need some permissions for MIUI to works and need confirm manually for each apps who will be restored (MIUI and AOSP/LOS)
MIUI specific >
2 - MIUI integrate a similar function in backup/restore item in settings under factory reset (work like a charm too and no action is required > MIUI only)
Both store backuped elements in internal storage then u can easily clone it on ur desktop !!!
Phaze1585 said:
Sorry, I wish I could help. I to want to root my device so that I can flash custom roms too, but I've all but given up on that.
Click to expand...
Click to collapse
First of all you have to unlock your bootloader then flash your recovery, here is a link that might help you : http://en.miui.com/thread-424221-1-1.html
Then,
Phaze1585 said:
I don't know why you mean though, when it comes to your second question -
"The research function doesn't work at all, I have an error (cf : video). whatever the choices that i make the problem will still the same..."
Click to expand...
Click to collapse
When i'm pulling down the notification bar i have a search bar, when i want to search, the search crash and i have errors just like on the screenshot
LordBli said:
First of all you have to unlock your bootloader then flash your recovery, here is a link that might help you : http://en.miui.com/thread-424221-1-1.html
Then,
When i'm pulling down the notification bar i have a search bar, when i want to search, the search crash and i have errors just like on the screenshot
Click to expand...
Click to collapse
Settings » Installed apps » All(tab) » Search » App permissions; give these permissions(if did not). Besides; some themes have ability to disable the 'Search' feature on notification panel. Just saying.
lesscro said:
Xposed works great on MIUI 8 (8.5) (Android 6)
If u want keep MIUI or change ROM to pure android :
Universal method >
1 - Titanium backup 'but need some permissions for MIUI to works and need confirm manually for each apps who will be restored (MIUI and AOSP/LOS)
MIUI specific >
2 - MIUI integrate a similar function in backup/restore item in settings under factory reset (work like a charm too and no action is required > MIUI only)
Both store backuped elements in internal storage then u can easily clone it on ur desktop !!!
Click to expand...
Click to collapse
Oh Thanks i'll for that.
FYI. I want to change of Custom ROM (mi-globe).
So what can i do to do a clean install of the custom ROM ?
Go here...
https://forum.xda-developers.com/mi-mix/how-to/guide-flash-global-china-rom-root-gapps-t3510592
Konsstantine34 said:
Settings » Installed apps » All(tab) » Search » App permissions; give these permissions(if did not). Besides; some themes have ability to disable the 'Search' feature on notification panel. Just saying.
Click to expand...
Click to collapse
It works like a charm now ! Thanks a lot !
LordBli said:
Hello !
I have some question, hope that you can help me.
1. I want to install the Xposed module but i want to knw if it's stable on the Mi Mix ROM.
I'm asking that because i came from a Xperia Z Ultra and the Xposed module wasn't that stable...
2. I want to change of ROM, how can i perform a clean install and kepp my actual apps, is there a way ?
ANNEXE : I encounter some issue on my Xiaomi eu ROM, hope you can help me to find something
Here is my problem :
1 - The first one is my fingerprint sensors works 1/2 on the lockscreen, it's like that since the stable update of the 14 jun 2017. You need to know that the fingerprint sensor works well for unlocking app and else..
2 - The research function doesn't work at all, I have an error (cf : video). whatever the choices that i make the problem will still the same...
Can you please help me ??
Best Regards,
LordBli
Click to expand...
Click to collapse
Without additional information, it's quite difficult to assist.
Firstly, you came from the Z Ultra. I too purchased the Mi Mix to replace my Z Ultra, with its stock firmware being stuck on MM and the aftermarket support not being brilliant the Mix was a suitable choice. However I had no issue with Xposed on my Z Ultra, perhaps your choice of Xposed modules was the problem???
If you haven't unlocked your bootloader, then you need to do that first. Bear in mind, once unlocked you will lose all android pay functionality.
Which Mix do you have...? Mine is the 6GB/256GB variant, and certain system modifications only work on the specific versions.
Have you flashed TWRP, if so which version?
In answer to your first problem - remove all fingerprints and re-add them. On some of the stock miui.com firmware releases, it doesn't migrate fingerprint information correctly.
In answer to your second problem - you *should* try running the current weekly release from xiaomi.eu:
https://sourceforge.net/projects/xi.../files/xiaomi.eu/MIUI-WEEKLY-RELEASES/7.7.20/
If you are running *stock* firmware, you *will* need to factory reset.
-----
With regards to your "research" problem, I assume you mean the global search from the phone (If this is not the case then let us know what you mean).
Again, I've not experienced issues searching the phone since changing to the xiaomi.eu (weekly) global firmware which is based on Android 7.0 however Xposed support is minimal.
If you want to change firmware, unless you change to the same build structure then you won't be able to keep your current data.
e.g. stock miui.com firmware to xiaomi.eu firmware.
In this situation, root and titanium backup is your friend.
Thanks for your answer, it is really helpful !
acolwill said:
Without additional information, it's quite difficult to assist.
Firstly, you came from the Z Ultra. I too purchased the Mi Mix to replace my Z Ultra, with its stock firmware being stuck on MM and the aftermarket support not being brilliant the Mix was a suitable choice. However I had no issue with Xposed on my Z Ultra, perhaps your choice of Xposed modules was the problem???
Click to expand...
Click to collapse
Maybe you're right maybe this was the problem.
If you haven't unlocked your bootloader, then you need to do that first. Bear in mind, once unlocked you will lose all android pay functionality.
Which Mix do you have...? Mine is the 6GB/256GB variant, and certain system modifications only work on the specific versions.
Have you flashed TWRP, if so which version?
Click to expand...
Click to collapse
I have the same version as you do ! I have flashed TWRP v3.0.2-0 !
In answer to your first problem - remove all fingerprints and re-add them. On some of the stock miui.com firmware releases, it doesn't migrate fingerprint information correctly.
Click to expand...
Click to collapse
I'll try that and I'll let you know
In answer to your second problem - you *should* try running the current weekly release from xiaomi.eu:
https://sourceforge.net/projects/xi.../files/xiaomi.eu/MIUI-WEEKLY-RELEASES/7.7.20/
If you are running *stock* firmware, you *will* need to factory reset.
Click to expand...
Click to collapse
I'm actually running the last stable version of Xiaomi eu.
-----
With regards to your "research" problem, I assume you mean the global search from the phone (If this is not the case then let us know what you mean).
Again, I've not experienced issues searching the phone since changing to the xiaomi.eu (weekly) global firmware which is based on Android 7.0 however Xposed support is minimal.
Click to expand...
Click to collapse
It was a problem of permission, I fix it with the help of Konsstantine34 !
But do you have Xposed on your Mi Mix ?
If you want to change firmware, unless you change to the same build structure then you won't be able to keep your current data.
e.g. stock miui.com firmware to xiaomi.eu firmware.
In this situation, root and titanium backup is your friend.
Click to expand...
Click to collapse
I'm on xiaomi eu stable version and I'm thinking about passing to the mi-globe ROM version witch is based on the Xiaomi eu ROM !
LordBli said:
Thanks for your answer, it is really helpful !
Maybe you're right maybe this was the problem.
I have the same version as you do ! I have flashed TWRP v3.0.2-0 !
I'll try that and I'll let you know
I'm actually running the last stable version of Xiaomi eu.
Click to expand...
Click to collapse
No problems
-----
LordBli said:
It was a problem of permission, I fix it with the help of Konsstantine34 !
But do you have Xposed on your Mi Mix ?
Click to expand...
Click to collapse
Ah, I see.
I don't run Xposed on my Mix (Haven't found a real reason to...), I have it running on my Redmi Pro using dirty hacks from a thread on miui.com that really hurts my eyes... http://en.miui.com/thread-78894-1-1.html
LordBli said:
I'm on xiaomi eu stable version and I'm thinking about passing to the mi-globe ROM version witch is based on the Xiaomi eu ROM !
Click to expand...
Click to collapse
The only change I would personally use on a mi-globe firmware would be the three-way reboot menu, however that can be substituted with an application.
IMHO, I don't see any real reason to use "their" firmware as all they're doing is tweaking an already good release by an established team of developers
acolwill said:
No problems
Click to expand...
Click to collapse
-----
Ok so everything is great except for the fingerprint sensor, it doesn't work properly. I tried to delete all the fingerprint and then put them back but it still works 1/2 times...
Ah, I see.
I don't run Xposed on my Mix (Haven't found a real reason to...), I have it running on my Redmi Pro using dirty hacks from a thread on miui.com that really hurts my eyes... http://en.miui.com/thread-78894-1-1.html
Click to expand...
Click to collapse
You are right... It really hurts lol
The only change I would personally use on a mi-globe firmware would be the three-way reboot menu, however that can be substituted with an application.
IMHO, I don't see any real reason to use "their" firmware as all they're doing is tweaking an already good release by an established team of developers
Click to expand...
Click to collapse
Same for me but I wanted to test those tweak to see what it looks like
Any ideas for the fingerprint issue ?
Guys I've managed to create a navbar mod for the oreo carbon rom developed by rcstar6696. As the oreo carbon rom aint complete with customisations at the present which we had at the time of nougat.
The mod is : changed navbar height from 48dp to 32dp
(there is no color, navbar button theme, etc changed)
Required:
1. TWRP recovery
2. Obviously the rom for which the mod is
Root is not required
Installation:
1. Reboot to TWRP recovery
2. Install the attached zip
3. reboot
Bugs:
No bugs at all
Based on the OMS overlay system of android
It can bootloop 1-2 times after applying new mod. Just be patient and let it boot.
Testers needed:
This mod may work on other phones or roms running android 8.0 as long as they have the same Ids in the android framework. Which is most likely.
So someone with other phones on android 8.0 or other roms on z2(8.0 only) too plz test this out and let me know.
I cant test because i dont have any other device.
Plz let me know if it works so i can create a universal mod too.
In case if it bootloops, revert back by-
1. Reboot to TWRP
2. Mount system
3. Delete file "android.navbar_mod.apk" in system/vendor/overlay
4. Reboot
Also ive tried creating a dynamic navbar mod but it bootloops. So anyone with some info can help
Credits:
1. rcstar6696 and their team for an awesome oreo rom for our Z2 :good:
Press thanks if I Helped
Any screenshots?
kuba130000 said:
Any screenshots?
Click to expand...
Click to collapse
added
remove navbar
i want remove navbar. how do that? Please guide
Wrong section I suppose.
You should rather post this in Themes and Apps or General
DahakePL said:
Wrong section I suppose.
You should rather post this in Themes and Apps or General
Click to expand...
Click to collapse
Sry mate. I'm a bit new so didn't know where to put it...
manhlinhjp said:
i want remove navbar. how do that? Please guide
Click to expand...
Click to collapse
I can modify the framework for that but im not sure if the system will accept it. As 30dp results in bootloop if substratum theme is applied pre mod.
So for complete hiding i suggest u use the custom navbar app on the playstore...:good:
And if u wanna test the 0 dp navbar mod ill create it for u let me know.:angel:
So, please Create for me a file with 0px. Thanks you so much
manhlinhjp said:
So, please Create for me a file with 0px. Thanks you so much
Click to expand...
Click to collapse
Here u go.
Backup ur original framework-res.apk and restore via twrp if anything goes wrong.
2nd tip - uninstall all substratum overlays and try again.
Let me know if it works.
Hit the thanks button if i helped
PSaran said:
Here u go.
Backup ur original framework-res.apk and restore via twrp if anything goes wrong.
2nd tip - uninstall all substratum overlays and try again.
Let me know if it works.
Hit the thanks button if i helped
Click to expand...
Click to collapse
unsuccessful. Boot loop error. but thank you for the enthusiasm
manhlinhjp said:
unsuccessful. Boot loop error. but thank you for the enthusiasm
Click to expand...
Click to collapse
I'm sry to hear that. With me too the 30dp didn't work. 32dp only seems to have worked.
PSaran said:
I'm sry to hear that. With me too the 30dp didn't work. 32dp only seems to have worked.
Click to expand...
Click to collapse
Oh. No problem
can you make it new 8.1 update compatible ?
Hasanoz07 said:
can you make it new 8.1 update compatible ?
Click to expand...
Click to collapse
It works with 8.1 but in 8.1 the navbar icons scale with the navbar height so the back and the recents button become tiny as a dot. Functionality is not impaired though. Its 8.1 feature i dont think i can fix it.
But u can apply it and navbar will become small and at the same time use the pixel navbar app from playstore (with animation turned off in app) or use the custom navigation bar pro theme for the navbar(only available in pro).
The above apps apply a navbar button overlay and so u can see the buttons again. I'm using it the same way.
nice mod
Hi,
If you don't care about shelf launcher.
If you want to use instead Google feed launcher and keep OnePlus launcher.
Is there a app I built.
New app on play store :
On this version, the swipe version is deleted.
New tricks is setting up to trigger Google "feed".
Lite version (10 swipe by day)
https://play.google.com/store/apps/details?id=com.feedone.launcherlite
A paid version (no limitations)
https://play.google.com/store/apps/details?id=com.feedone.launcher
Let me know if something doesn't work
Old version:
version 2.0
- New option to customize the size and color of the sidebar
- More responsive
- long press on left border to force close the swipe zone
See on YouTube on this
Link
Thanks to VelianSpeaksTech for the video !
if you get some trouble please disable battery optimisations.
If you want to support my work or pay me a drink
I wish add more features
[url]https://www.paypal.com/pools/c/8ljFOgAJPC[/URL]
This app was developed with the magnificent application Tasker :good:by u/joaomgcd
Check the link
[url]https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm[/URL]
If you're rooted, this seems fantastic. If you are, quickswitch and lawnchair make OnePlus launcher totally unnecessary now that everything is nice and stable.
I'll give this a go and report back for science!
Edit: doesn't work, just keeps force closing.
xxBrun0xx said:
If you're rooted, this seems fantastic. If you are, quickswitch and lawnchair make OnePlus launcher totally unnecessary now that everything is nice and stable.
I'll give this a go and report back for science!
Edit: doesn't work, just keeps force closing.
Click to expand...
Click to collapse
I understand, but for me that's so interesting to root the phone.
That's why I do this
Ok thanks for feedback.
Could you check the permission and see if you're allowed all permission.
Like superposition ?
Sent from my GM1910 using XDA Labs
xxBrun0xx said:
If you're rooted, this seems fantastic. If you are, quickswitch and lawnchair make OnePlus launcher totally unnecessary now that everything is nice and stable.
I'll give this a go and report back for science!
Edit: doesn't work, just keeps force closing.
Click to expand...
Click to collapse
Can you try this version
https://drive.google.com/file/d/1OGCLyKSgjrgVryXtg3NxfNiXgQsgvnEN/view?usp=drivesdk
I didn't understand: this is for non rooted phones? Or root is still necessary?
--anx-- said:
I didn't understand: this is for non rooted phones? Or root is still necessary?
Click to expand...
Click to collapse
I just tried it and don't have root and it worked for me. Just follow the instructions ?
Thanks for the fillback
Sent from my GM1910 using XDA Labs
New update
I add a new feature, see the main post for the new option and app.
Enjoy:victory:
New version see the main post
I have a problem... My command prompt said ''adb: inaccessible or not found'' when I run a command. Actually, I can not find com.feedone.launcherlite in my data folder at all. Phone is not rooted. Do you how to solve such an issue?
thegolub said:
I have a problem... My command prompt said ''adb: inaccessible or not found'' when I run a command. Actually, I can not find com.feedone.launcherlite in my data folder at all. Phone is not rooted. Do you how to solve such an issue?
Click to expand...
Click to collapse
Hi, thank's fot test the app.
did you enable developper option ?
For more detail, follow this tutorial :
https://sites.google.com/view/lesscodeapp/tutorial-adb-command
abdess47 said:
Hi, thank's fot test the app.
did you enable developper option ?
Hi! Yes,but it's not a problem about it.I came to the last step of the instruction from the link which you provided,but like my phone does not have com.feedoneplus.launcherlite folder at all in Android/Data path,i.e. adb shell can not find that folder,despite the fact that application has been installed.
Click to expand...
Click to collapse
thegolub said:
abdess47 said:
Hi, thank's fot test the app.
did you enable developper option ?
Hi! Yes,but it's not a problem about it.I came to the last step of the instruction from the link which you provided,but like my phone does not have com.feedoneplus.launcherlite folder at all in Android/Data path,i.e. adb shell can not find that folder,despite the fact that application has been installed.
Click to expand...
Click to collapse
Permission don't need to access to folder.
What did you get if you write this command inside adb :
Code:
adb devices
For sure the good adb command is :
Code:
adb shell pm grant com.feedone.launcherlite android.permission.READ_LOGS
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
Does this work on android 11?
vinicioh23 said:
Does this work on android 11?
Click to expand...
Click to collapse
Test it. You should test the lite version
And let me know if you get trouble.
It's working for me.
I'm building a new