Database Develop

Bricked my HTC One M7

Honestly, this happened randomly (as far as I remember). My phone rebooted itself and got stuck in bootloop. I turned it off and now it doesnt turn back on. Computer does recognize it when plugged in (makes the connection sound) but doesnt show in my computer. Phone doesnt show any LED lights. Need help. Can't stand my backup phone :'(

EvoTheBoy said:
Honestly, this happened randomly (as far as I remember). My phone rebooted itself and got stuck in bootloop. I turned it off and now it doesnt turn back on. Computer does recognize it when plugged in (makes the connection sound) but doesnt show in my computer. Phone doesnt show any LED lights. Need help. Can't stand my backup phone :'(
Click to expand...
Click to collapse
Is the phone listed as QHSUSB_DLOAD in the device manager when its connected to your computer?

alray said:
Is the phone listed as QHSUSB_DLOAD in the device manager when its connected to your computer?
Click to expand...
Click to collapse
This is all I got
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Bump. Any suggestions?

Bump

EvoTheBoy said:
Bump
Click to expand...
Click to collapse
Boot the phone in bootloader / fastboot usb mode
using fastboot you can first try to erase the cache:
Code:
fastboot erase cache
fastboot reboot
If it snot working then you can try a factory reset which will wipe your phone. Boot in bootloader mode, exit the fastboot menu (if needed) by selecting "bootloader" and then do the factory reset selecting "factory reset"
If its still not booting then boot in bootloader / fastboot usb mode and using fastboot type:
Code:
fastboot getvar all
ad copy paste the output here

alray said:
Boot the phone in bootloader / fastboot usb mode
using fastboot you can first try to erase the cache:
Code:
fastboot erase cache
fastboot reboot
If it snot working then you can try a factory reset which will wipe your phone. Boot in bootloader mode, exit the fastboot menu (if needed) by selecting "bootloader" and then do the factory reset selecting "factory reset"
If its still not booting then boot in bootloader / fastboot usb mode and using fastboot type:
Code:
fastboot getvar all
ad copy paste the output here
Click to expand...
Click to collapse
I can't even boot into bootloader

I would suggest you try it on Windows 7.

Kasia said:
I would suggest you try it on Windows 7.
Click to expand...
Click to collapse
The computer OS won't make any difference if OP can't even boot in bootloader mode.
EvoTheBoy said:
I can't even boot into bootloader
Click to expand...
Click to collapse
Sorry but if the phone can not go in bootloader mode, even by forcing it using power and volume down, then there is nothing we can do.

In that case, I would try this on Ubantu.
http://forum.xda-developers.com/showthread.php?t=2770684

Your device is corrupt.... Bootloop LG k8 . Recovery doesn't work

Hi guys, i was rooting my phone LG k8 using adp method get form here : https://forum.xda-developers.com/lg-k10/how-to/friendly-root-method-lg-k8-k10-t3531223
but in the last step in the rooting part i noticed that the SuperSU archive didn't appear in the TWRP manager so i got no more choise than reboot. Now the problem is that after the LG logo appears the message saying "Your device is corrupt...", then restarts - logo - your device is corrupt - restarts - logo - your device .... well, a bootloop, is so anoying. I tryed to use recovery funcion of LG, but when it ends, phone reboot and the problem is still there: bootloop. I can't boot in fastboot mode or anything elese form the PC so i don't know what to do. How can i fix this problem? hope my phone doesn't become a brick.....

1. Download LG K8 firmware (k350n) here or here.
2. Download LG UP software and the dll for LG K8.
3. Boot your phone into Download Mode (hold Volume-Up key & connect the phone to your computer via USB).
4. Upload firmware to your phone (update mode).
Your phone should be reset and working, but not rooted...
I hope this helped

If you cant boot into download mode, connect the phone without the battery to computer. It will find 3 devices. then put the battey back and press volume up. You'll get to download mode. Download and install lg bridge. s. Restart pc. If your device is in download mode lg bridge will see it. Go to update tab, try it. If your device is up to date an option will come up after trying to update to the right of the update tab saying error during update. Press on it and then wait. It will download install and reboot.

Experiencing similar problem on my LG K8 (K350Z).
I've successfully rooted device using guide: https://forum.xda-developers.com/lg-k10/how-to/friendly-root-method-lg-k8-k10-t3531223
Later I decided to recover to stock KDZ, but did very stupid thing first - I've entered recovery mode (by pressing down+power, then down+power+up) and selected "Yes". After that green droid shown, and phone restarted, showing logo, then "Device is corrupt" message then off.
Starting it goes through logo"Device is corrupt" loop.
I've tried many suggestions to use LGUP and LG Bridge, but PC simply doesn't see the phone correctly.
Driver re-install didn't help much, it's still shown in Device Manager as "LTE Android MTP Device" with yellow exclaim triangle, but LGUP and LG Bridge can't connect to it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I select in LGUP it says "LGUP can't load the model[C:\Program Files (x86)\LG Electronics\LGUP\model\com"

Finally! Resolved the problem. Looks like I've installed different driver versions and LGUP and LG Bridge in wrong order.
Re-installing everything helped and LG Bridge was able to flash the updated software version (V10f-AME-XX) and now my K8 works fine
Going to try post 2017 rooting methods soon.

yukosteel said:
Finally! Resolved the problem. Looks like I've installed different driver versions and LGUP and LG Bridge in wrong order.
Re-installing everything helped and LG Bridge was able to flash the updated software version (V10f-AME-XX) and now my K8 works fine
Going to try post 2017 rooting methods soon.
Click to expand...
Click to collapse
Hi, i have same phone and same problem. And i dont know which driver should i install because its keeps rebooting my phone. Can you help me plss

OSAL said:
Hi, i have same phone and same problem. And i dont know which driver should i install because its keeps rebooting my phone. Can you help me plss
Click to expand...
Click to collapse
hi, i got bootloop and phone just rebooting every time, no matter i hold pwr_up or not, it is not entering download mode anywaw, can you help me??? pls

farxad007 said:
hi, i got bootloop and phone just rebooting every time, no matter i hold pwr_up or not, it is not entering download
Click to expand...
Click to collapse
i can't go to download mode bc the phone say that is corrupted

Have you tried doing a long reset for your phone type by holding the correct buttons before the phone starts. Let it die first then charge it and try a long reset

Z3 compact destroyed after root/unroor trial?!

Hi guys,
I need your help!
I have had a rooted Z3compact and i wanted it to unroot. But I did a mistake and now it looks like that the phone is dead.
What I did:
1. I wanted to unroot my phone. So I restarted it to enter the recovery menu. (pushing power button and loudspeaker buttons). Because of the fact that I rooted my phone the TWRP Menu appeared.
2. I entered the "Wipe-Menu" and selected all:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dont want to select system, but I already pushed the button
I thought I can anyway at least enter the TWRP, but no!
When I now start the phone just the Sony Logo appears and that's all.
I already tried:
a. PC Companion -> Phone not detecting
b. Flash Tool -> Detects the phone but shows " This phone is locked"
-> This why the question to all of you. Is there a possibility to fix this?
THANK YOU!!!

Try using Emma
https://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/

Hello as I wrote before I already tried "Emma or Flashtool" and unfortunately It appears "This phone is locked"
So I don't know what eslse I can do because I am not an expert.
I would appriciate if someone have some other ideas or hinds.
Thanks

sogblade said:
Hello as I wrote before I already tried "Emma or Flashtool" and unfortunately It appears "This phone is locked"
So I don't know what eslse I can do because I am not an expert.
I would appriciate if someone have some other ideas or hinds.
Thanks
Click to expand...
Click to collapse
Well, there is actually 2 completely unrelated tools that is both using the name flashtool.
In this case the unofficial Flashtool is what you should try as it can work on a phone with a locked bootloader as well.
So download this and try to flash a stock rom (make sure you select one that is compatible with your mode [l/B])
Flashtool can automatically grab the firmware and download it for you.
Please let me know if this works for you
http://www.flashtool.net/index.php

So what you did is,since you have a locked bootloader,the recovery is actually located in the system partition,so then when you wiped it you removed recovery as well.
As @-Zteam- said try using the unofficial Flashtool and you should be good.

Hi Zteam thank you for this tip.
I installed the tool.
I connected the phone (I just connected the USB cable) and the tool shows "Device connected in flash mode".
When I do nothing after a while the phone starts (Sony Logo on display) and the tool shows "Device disconnected".
Can you give me a short instruction which steps I have to do?!
This would be perfect.
Thanks alot!

sogblade said:
Hi Zteam thank you for this tip.
I installed the tool.
I connected the phone (I just connected the USB cable) and the tool shows "Device connected in flash mode".
When I do nothing after a while the phone starts (Sony Logo on display) and the tool shows "Device disconnected".
Can you give me a short instruction which steps I have to do?!
This would be perfect.
Thanks alot!
Click to expand...
Click to collapse
You want to select the ftf file you're going to flash, and then choose flash. It takes a while to become ready, perhaps its unpacking the file to be flashed (don't know why but it takes a fair bit of time). The phone will reboot during this wait as you've experienced. You can hold down the power button and the volume up button together for a number of seconds to power it off, unplug the cable, then replug it in flashmode again, or from memory you can just wait until the file is ready to be flashed, then plug the phone in flashmode in which case it isn't going to reboot because its powered off and disconnected.
One of those things will work, either not plugging it in until it tells you it needs to, after choosing to flash the ftf, or by forcing it off and back on in flashmode using the power button and volume button.

Hi,
the phone works again! Thanks to all!
For all who have the same problem

I really can recommend this tool. It is very easy to handle.

Nokia 8 TA-1004 Bricked

Hi all, I just bricked my phone and was wondering how to recover it, the following list details all that was done before the brick occurred:
Brand new phone on Android 7, updated to 9 through OTA
Tried to unlock the bootloader, received the "Device not support"[SIC] message
Downgraded to 8.1 following the instructions from this thread
Successfully unlocked bootloader
Updated to Android 9 again over OTA, got security patch 2019-05
Rebooted into download mode using adb reboot bootloader
Flashed twrp-3.2.3-1-NB1.img
Booted into TWRP
TWRP asked for pattern, said it was incorrect, phone stopped being recognized by adb devices
Rebooted into OS, removed Google account and pattern
Tried: adb reboot bootloader, command was not accepted (this was how I booted into download mode up until this step). Tried adb devices and my phone was marked as offline, even though USB debugging was enabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disconnected USB cable, turned phone off, held down Volume Down Key, connected USB cable.
Warning Screen appeared:
It's been stuck that way, I cannot get past that screen nor turn the phone off. PC recognizes it under Portable Devices->Nokia 8, when I try adb devices it is not listed.

Angcrad said:
Hi all, I just bricked my phone and was wondering how to recover it, the following list details all that was done before the brick occurred:
Brand new phone on Android 7, updated to 9 through OTA
Tried to unlock the bootloader, received the "Device not support"[SIC] message
Downgraded to 8.1 following the instructions from this thread
Successfully unlocked bootloader
Updated to Android 9 again over OTA, got security patch 2019-05
Rebooted into download mode using adb reboot bootloader
Flashed twrp-3.2.3-1-NB1.img
Booted into TWRP
TWRP asked for pattern, said it was incorrect, phone stopped being recognized by adb devices
Rebooted into OS, removed Google account and pattern
Tried: adb reboot bootloader, command was not accepted (this was how I booted into download mode up until this step). Tried adb devices and my phone was marked as offline, even though USB debugging was enabled.
Disconnected USB cable, turned phone off, held down Volume Down Key, connected USB cable.
Warning Screen appeared:
It's been stuck that way, I cannot get past that screen nor turn the phone off. PC recognizes it under Portable Devices->Nokia 8, when I try adb devices it is not listed.
Click to expand...
Click to collapse
Try to press all tree buttons at same time and keep them for a 3/4 minutes.
I had a similar problem and solve like that.

Allek84 said:
Try to press all tree buttons at same time and keep them for a 3/4 minutes.
I had a similar problem and solve like that.
Click to expand...
Click to collapse
Many, many, many thanks. After pressing all the buttons for about two minutes, the screen turned off, then I turned the phone on and it booted into the OS.
Any comments on the device offline front?

Question Bricked My Redmi note 10 5g Device

Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..

dannykuma said:
Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
Click to expand...
Click to collapse
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.

1lopes said:
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
View attachment 5733123
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
Click to expand...
Click to collapse
Thank you very much for the help....
Let me try

indonesian rom is fully compatible. sure u made something bad.
your bootloader is unlocked???? u have downloaded fastboot version? clean flash selected? write al steps u did with precision. i'm 100% sure is not a compatibility problem. i have installed indonesian rom more then one time without any problems
IF U CAN ENTER INTO FASTBOOT, U CAN RESTORE YOUR PHONE WITHOUT PROBLEMS. stay away from advanced procedures like restore preloader. First try the easyest solutions. If didnt work i suggest mtkclient under arch linux for reflash boot vbeta and preloader. But follow my tip: enter into fastboot and reflash stock using adbdastboot tool. Is the easyest solution