I've tried flashing the Unknown (XAS) version of the N920PVPS3DRD1 firmware coming from the N920PVPS3DRD1 Sprint (cdma) Through odin. It got stuck on finding pit file, so I closed odin and now my device is stuck in a bootloop. It stays on samsung galaxy note 5 screen then restarts and goes to TWRP. When I go into download mode it doesn't display any information in the top left. I have a backup of the sprint version which I have tried restoring to (I haven't wiped any data in fear of losing the backup) However I have the backup on my PC too which I should be able to send to the device using ADB. This didn't work. And it is still stuck in a bootloop. Does anyone know how to solve the issue? Thanks.
Related
Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours buy than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?
Hi,
Okay so I have a Galaxy Ace S5830. It was rooted etc with no problems. I was just running the stock ROM (Koodo) that it came with.
Earlier I took a backup with CWM, then I used ODIN to flash a different ROM that I got from a different thread. However this ROM was not working well for me, the network connection kept winking in and out, so I wanted to go back to my stock ROM.
I got the stock firmware from SamFirmware using my model + country. I then used ODIN to flash the stock ROM.
When I boot after doing this, I go into a bootloop between the Koodo splash screen and the glowing SAMSUNG logo.
To hopefully remedy this, I used CWM to restore the backup I had taken previously.
However, when I boot after doing this, there is no loop, the phone simply sits at a screen with a black background that says Samsung GALAXY Ace GT-S5830D in white lettering. I have left it for a substantial amount of time and nothing changes.
I have read some other threads and they all suggest re-flashing stock rom with ODIN which I have done to the same result. So at this point the firmware will not fully boot, whether or not I have restored the backup.
Any help in fixing this will be appreciated! I'm stuck and I don't know what to do at this point, other than try some other firmwares.
Thanks!
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
frozenreddy said:
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
Click to expand...
Click to collapse
Before restoring your back up, do 3 the wipes and then restore your backup
I flashed Virginity Rom.
Afterwards my phone infinitely keeps coming up with the 'Samsung Galaxy SIII Mini I8190T.'
I think the problem was when I chose the virginity setting to keep default bootscreen.
I can access Download Mode/Odin Mode but I can't access recovery.
I have a backup but as I said, No recovery so I cant restore.
I have CWM Touch Recovery if that helps.
I tried flashing PAC Android with Odin but that didn't work.
What do I do?
I am willing to completely refresh my phone, backups and all It doesn't matter.
I just can't lose this phone!
Update: I flashed a file called 'PARAM_I8190.tar.md5' and now it doesn't even show the Samsung Galaxy Screen.
It mainly just shows up with the Downloading... Screen sometimes distorted.|
bigdaddybioshock said:
I flashed Virginity Rom.
Afterwards my phone infinitely keeps coming up with the 'Samsung Galaxy SIII Mini I8190T.'
I think the problem was when I chose the virginity setting to keep default bootscreen.
I can access Download Mode/Odin Mode but I can't access recovery.
I have a backup but as I said, No recovery so I cant restore.
I have CWM Touch Recovery if that helps.
I tried flashing PAC Android with Odin but that didn't work.
What do I do?
I am willing to completely refresh my phone, backups and all It doesn't matter.
I just can't lose this phone!
Update: I flashed a file called 'PARAM_I8190.tar.md5' and now it doesn't even show the Samsung Galaxy Screen.
It mainly just shows up with the Downloading... Screen sometimes distorted.|
Click to expand...
Click to collapse
i think you should flash official stock rom for you to revive your phone
hi my name is hackmii i need some help
basicaly my samsung galaxy s (i9000) was running very slowly so i got cwm and then installed cm11 snapshot the installion said: installion aborted!: code (0)
then i restarted the phone expecting nothing to been changed then the phone came up with cyanogen(mod)
and then came up with a updated cwm then some error then it restarted and kept doing the same thing then i eventualy got into cwm and tryed restoreing it failed at /boot after that i tried to install cm11 again this time everything went smoothly but then i restarted expecting to see the cyanogenmod boot up but the phone would not get past the samsung galaxy s logo i then tried to get into recovery but it did not work after that i tried download mode that did work. so my question is can i fix my /boot with odin because right now im attempting to flash the stock firmware with odin
any help?
(fingers crossed)
Note i also have a nandroid backup from cwm on my pc on top of that my phone is a orange (carrier) GT-I9000 this is my only phone in a long time and it would really upset me if i couldnt recover it.
Hi everyone,
I've had numerous problems with OTA updates with my AT&T SM-G900A since I got it. I'm not in the US anymore and my phone was unlocked, so I thought "hey, how hard could it be" and tried to flash it.
I used the following binaries that were posted here a couple of days ago: http://forum.xda-developers.com/att-galaxy-s5/general/g900aucs4cpa2-odin-files-em-hot-t3372388
I ran them through Odin3 3.09, and got a PASS - but the phone is stuck at the boot logo screen ("Samsung Galaxy S5 Powered by Android" screen).
Download mode still works, but normal booting, recovery booting and safe mode do not.
Any suggestions on what I could do?
EDIT: I used the stock image located here: http://forum.xda-developers.com/showthread.php?t=2714455 to reflash it using Odin again. It seems to have worked, though all sorts of apps were crashing. I've just done a factory reset and am in the process of restoring it, but it seems promising for now. Never trying to update AT&T crap again.
Hey man, are you still having troubles? I just rooted my Sm-G900A, and then decided to use Odin to flash it with the 5.1.1 files. So this is what happened to me:
1: Flashed AP with the 5.1.1 file, passed but stuck at the Samsung Logo- Powered by Android.
2: rebooted into download mode and flashed "BL" or Bootloader with the 5.1.1 file and I got passed that screen. Now I'm waiting for it to optimize my apps.
My guess is after we flash the AP file we then have to flash the bootloader as well. So if you haven't tried that I'd suggest it to see what happens.