Hi guys, I'm a bit frustrated since I bought my Nokia 8 TA-1012.
[INTRO]
Besides the seller sent me a used phone, with an already opened screen, my real issue right now is with the Wifi.
My phone came from Israel and I'm using it in Brazil.
The Android is in the 8.1 version, still waiting for the camera update.
[ISSUE]
I'm having huge problems with Wifi Networks, both 5GHz and 2,4GHz, where after some time connected, the phone will disconnect and give me the following message when I try to connect again:
NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION = #
where # is a number counter that increments everytime the phone tries to reconnect.
All my other devices are working fine on my networks, including a Galaxy S7 Edge, a Moto X 2013, a Motorola Moto Z2 Play, my Nintendo Switch, PS3, notebooks and guest devices that come here.
[WHAT I TRIED ALREADY]
setting a fixed IP in the router
resetting the router configs to default
clearing the phone cache and rebooting (solves temporarily)
rebooting in safe mode (still happens)
factory reset on the phone, install nothing and wait (still happens. Google Play Store is the first app to update)
changing network from 2,4GHz to 5GHz
changing networks channels and bands
[DISCOVERIES]
I have enabled the Developer mode and the extended Wi-Fi registry, where I can see the error message mentioned above. I see that a score is set to the network and when this error happens, the score is set at ZERO.
I read that Pixels phones had a similar issue, but none of the information provided on different sites solved for me.
[END]
I'm waiting for the camera update and hoping to fix it bt that. But, what if it don't solve it?
Does anyone have any idea how to solve this?
Device with unknown name
I found out that my device has no name at any router. Could be that be the issue, since all other devices have their name attached in the device list of the router?
When looking at the device name in the WiFi setting, it is set as Nokia 8.
Could be possible that all the routers are rejecting my phone because it has no name transmitted? I think the MAC address it's the only necessary information.
Somebody??? Please???
Debug info
I've got some information from the debug.
The file is huge, but there some information related to the WiFi, as follows:
06-13 20:38:49.639 1000 1441 1913 D WifiService: New client listening to asynchronous messages
06-13 20:38:49.640 1000 1441 1913 D WifiService: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
06-13 20:38:49.640 1000 1441 1913 D WifiService: Connect with config ID: 0 SSID: "Rezende" PROVIDER-NAME: null BSSID: null FQDN: null PRIO: 0 HIDDEN: false
06-13 20:38:49.640 1000 1441 1913 D WifiService: NetworkSelectionStatus NETWORK_SELECTION_TEMPORARY_DISABLED
06-13 20:38:49.640 1000 1441 1913 D WifiService: mNetworkSelectionDisableReason NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION
06-13 20:38:49.640 1000 1441 1913 D WifiService: NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION counter:5
06-13 20:38:49.640 1000 1441 1913 D WifiService: hasEverConnected: true
06-13 20:38:49.640 1000 1441 1913 D WifiService: numAssociation 8
06-13 20:38:49.640 1000 1441 1913 D WifiService: validatedInternetAccess
06-13 20:38:49.640 1000 1441 1913 D WifiService: KeyMgmt: WPA_PSK Protocols: WPA RSN WAPI
06-13 20:38:49.640 1000 1441 1913 D WifiService: AuthAlgorithms: OPEN
06-13 20:38:49.640 1000 1441 1913 D WifiService: PairwiseCiphers: TKIP CCMP
06-13 20:38:49.640 1000 1441 1913 D WifiService: GroupCiphers: WEP40 WEP104 TKIP CCMP
06-13 20:38:49.640 1000 1441 1913 D WifiService: PSK: *
06-13 20:38:49.640 1000 1441 1913 D WifiService: sim_num
06-13 20:38:49.640 1000 1441 1913 D WifiService:
06-13 20:38:49.640 1000 1441 1913 D WifiService:
06-13 20:38:49.640 1000 1441 1913 D WifiService:
06-13 20:38:49.640 1000 1441 1913 D WifiService:
06-13 20:38:49.640 1000 1441 1913 D WifiService: Enterprise config:
06-13 20:38:49.640 1000 1441 1913 D WifiService: IP config:
06-13 20:38:49.640 1000 1441 1913 D WifiService: IP assignment: DHCP
06-13 20:38:49.640 1000 1441 1913 D WifiService: Proxy settings: NONE
06-13 20:38:49.640 1000 1441 1913 D WifiService:
06-13 20:38:49.640 1000 1441 1913 D WifiService: blackListed: 1528932708sec cuid=1000 cname=android.uid.system:1000 luid=1000 lname=android.uid.system:1000 lcuid=1000 userApproved=USER_UNSPECIFIED noInternetAccessExpected=false roamingFailureBlackListTimeMilli: 1000
06-13 20:38:49.640 1000 1441 1913 D WifiService: recentFailure: Association Rejection code: 1
06-13 20:38:49.666 wifi 952 952 W wificond: Scan is not started. Ignore abort request
06-13 20:38:50.698 wifi 952 952 I wificond: Connect timeout
06-13 20:38:50.740 wifi 796 796 E [email protected]: Failed to get firmware debug dump: NOT_SUPPORTED
06-13 20:38:50.740 wifi 796 796 E [email protected]: Failed to get driver debug dump: UNKNOWN
I hope can help someone to help me.
Dear Sirs, i have the same problem with my Samsung J3 2017 with Android 8.0. All other devices can connect to the hotspot; my J3 can't connect and i have the same NETWORK_SELECTION_TEMPORARY_DISABLED and NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION.
The phone can connect seamless to other wifi networks.
Could you please tell me how can i solve this issue?
Thank you very much in advance.
Hello.
=> can't connect and i have the same NETWORK_SELECTION_TEMPORARY_DISABLED and NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION.
Exact same problem from the beginning with new Galaxy A8 (december 2018), Oreo 8.0.0 updated Tue 4 dec, + updated today -did not change anything re: Wifi).
Any luck with solution?
PS:
- this happens when I try to connect to my windows Asus Laptop dual band 2.4 and 5.0 Ghz wifi hotspot (from 2015);
- the new A8 connects perfectly on my old S5 hotspot, and various other wifi hotspots;
- the old S5 connects perfectly to the windows Asus Laptop dual band 2.4 and 5.0 Mhz wifi hotspot, just as any other android phone in the past 3 years.
Wifiman sees the hotspot created with Intel Dual Band Wireless AC 7265, sees SSID, sees channel 11 2452 - 2472 MHz - 38 dBm, does not see anything at 5.2 MHz.
Device manager on Laptop lets me change channel for Ad Hoc Channel 802.11b/g, but WifiMan still detects only channel 11 (channel number parameter change has no effect after restarting hotspot).
Of course: resetting network settings didn't do anything (Only sugestions by Samsung Members Experuence, other than Factory reset cellphone just out of box + updated).
Private DNS?
Maybe some help:
Some people mentioned to remove the auto DNS option, but that would not make sense in the context of DHCP options.... But....
There is this new Private DNS setting that you might wanna turn off (from auto)
Follow these steps to setup Private DNS on Android:
Open Settings and go to Network & Internet – Advanced – Private DNS or just search for “Private DNS” in settings search bar.
It s been good for me so far, but I let you confirm that it last for you too.
Hello,
Have faced similar problem with "Xiaomi Mi A2 Lite" and I've fixed it by changing 5G band from AC to A/N (in my case) worked fine, but once I change to A/N/AC doesn't works (my router MikroTik AC Lite)
Hope helps for somebody
Possible solution association rejection
Rebooting the phone has always worked for me. But issue will come back in days. I connect to a lot of different WiFi networks during the week, but happens with my home network only.
The second solution that works often is turn off Bluetooth and mobile data and then set the phone in airplane mode for a couple of minutes.(not too shortly)
Have you tried another network? I had this issue in a ****ty hotel in Norway but home it works fine. Also, everyone else had the network working perfectly. Maybe this phone is a bit picky with networks.
I found the same problem with Redmi A2, the problem was solved after disabling the 5 GHz band in the Access Point configuration, in other words my AP only uses the 2.4 GHz band.
Acir said:
Hi guys, I'm a bit frustrated since I bought my Nokia 8 TA-1012.
[INTRO]
Besides the seller sent me a used phone, with an already opened screen, my real issue right now is with the Wifi.
My phone came from Israel and I'm using it in Brazil.
The Android is in the 8.1 version, still waiting for the camera update.
[ISSUE]
I'm having huge problems with Wifi Networks, both 5GHz and 2,4GHz, where after some time connected, the phone will disconnect and give me the following message when I try to connect again:
NETWORK_SELECTION_DISABLED_ASSOCIATION_REJECTION = #
where # is a number counter that increments everytime the phone tries to reconnect.
All my other devices are working fine on my networks, including a Galaxy S7 Edge, a Moto X 2013, a Motorola Moto Z2 Play, my Nintendo Switch, PS3, notebooks and guest devices that come here.
[WHAT I TRIED ALREADY]
setting a fixed IP in the router
resetting the router configs to default
clearing the phone cache and rebooting (solves temporarily)
rebooting in safe mode (still happens)
factory reset on the phone, install nothing and wait (still happens. Google Play Store is the first app to update)
changing network from 2,4GHz to 5GHz
changing networks channels and bands
[DISCOVERIES]
I have enabled the Developer mode and the extended Wi-Fi registry, where I can see the error message mentioned above. I see that a score is set to the network and when this error happens, the score is set at ZERO.
I read that Pixels phones had a similar issue, but none of the information provided on different sites solved for me.
[END]
I'm waiting for the camera update and hoping to fix it bt that. But, what if it don't solve it?
Does anyone have any idea how to solve this?
Click to expand...
Click to collapse
Oo @Acir aqui é dbpm1 direito de Santa Catarina rs
It may be a little too late but have you tried the "Reset Wi-Fi, mobile and Bluetooth" option in the 3dots top right corner on Network & Internet settings?
That by itself should resolve the issue, but if you did a factory restore and even after that if the wifi isn't connecting, you may have (had?) a defective device or an incorrect rom written to it.
Let us know in a reply below!
xau brigadu :silly:
Hi, now i have the some problema, how did you solve it?
Thanks
moteroforever said:
Hi, now i have the some problema, how did you solve it?
Thanks
Click to expand...
Click to collapse
Try to disable Protected Management Frames and Wi-Fi Agile Multiband in your router option.
I have an ASUS RT-AX58U and this was the problem for me.
I was trying to connect an old Galaxy TAB 3 10.1, with a 14.1 lineage OS (Android 7.2).
FYI
This 2 options permits to prevent hack by eavesdropping & forging management packets. source: wi-fi.org/knowledge-center/faq/what-are-protected-management-frames
I think it's safe to remove in home condition, not for sensible network
CQMantis said:
Hello,
Have faced similar problem with "Xiaomi Mi A2 Lite" and I've fixed it by changing 5G band from AC to A/N (in my case) worked fine, but once I change to A/N/AC doesn't works (my router MikroTik AC Lite)
Hope helps for somebody
Click to expand...
Click to collapse
How to change 5G band? Please tell the process. I am facing same problem now.
Have similar issue with my redmi Note 4 while it is trying to connect to iphone12's hotspot it is not having any issues with connection to any other network it's just very specific to this iPhone only.
Tried changing the network band tried resetting wifi setting tried disabling wifi assistant nothing is working this error of (NETWORK_SELECTION_TEMPORARY_DISABLED,33m12s)NETWROK_SELECTION_DISABLED_AUTHENTICATION_FAILURE=1
Related
Has anyone got tethering working with the Kaiser/Tilt on Linux? I cannot seem to get it working with the builtin Wmodem program (ipaq module) or MobileStream's USB modem (cdc_adm module).
I am new to AT&T from Verizon, and may simply be having GPRS ppp chat-script issues. So anyone with experience in getting this working... I would appreciate any help you could offer.
Regards,
SC
the way I've been tethering is with bluetooth. I found this tutorial and followed it: http://klamstwo.org/evad/archives/40
I run Fedora 7 (Moonshine) and it works flawlessly.
Thanks for the info... I will give that a shot. Also, when I tethered my Treo on Verizon with bluetooth it was really slow. Since this is BT 2.0 and I have a BT 2.0 module for my laptop... how much difference do you think there will be between BT/USB tethering.
Thanks,
SC
When I tethered my MDA it was slow too, mainly because of lack of 3G. Connecting was slow as well.
I've yet to get USB to work, actually I havent tried but I've done it in XP Pro and there wasn't much of a difference IMO.
Got it working with wvdial
After many hours of tinkering, I got USB tethering with wvdial.
First, start the Wmodem program on the Tilt and select USB. Then click Menu-->Start
On the command line type: /sbin/modprobe ipaq vendor=0x0bb4 product=0x00cf
Now plug in your USB cable
If you type dmesg you should see that ttyUSB0 is now initialized
Create a /etc/wvdial.conf with the following:
[Dialer Defaults]
Modem = /dev/ttyUSB0
ISDN = off
Modem Type = Analog Modem
Baud = 460800
Init = ATZ
Init2 = ATZ+CGDCONT=1,"IP","ISP.CINGULAR"
Init3 =
Init4 =
Init5 =
Init6 =
Init7 =
Init8 =
Init9 =
Phone = *99#
Phone1 =
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATDT
#Ask Password = on
Password = CINGULAR1
Username = [email protected]
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
Lastly create a file called /etc/ppp/peers/wvdial containing the 2 lines:
lcp-echo-failure 0
lcp-echo-interval 0
Now at a command prompt type wvdial
You should see it connect and get an IP address
You can put the modprobe statement in /etc/rc.local
Hope this helps... it works for me (I am posting this via the USB tether right now)
Also, can an admin change this thread name and add a SOLVED to it?
Regards,
SC
Hi.
Ive been using cyanogenmod since i got my nexus.
Been running gr8. No problems what so ever.
Now however my wlan suddenly decided to be unavailable.
I was running CM5.0.6 + DesireCamera OC/UV kernel.
Symptoms: When enabling Wifi i get no Icon and if i scan for networks I see no networks.
What ive tried so far without luck in order.
Reflash cm 5.0.6. <- multiple times
reflash desirecam <- multiple times
push bcm4329.ko <- multiple times
wiped all and
Kang-o-rama 0.6
Edit
Just tried reflashing radio and then pushing bcm4329.ko.
still no go
And it still isnt working
Am i missing something ?
Heres what i got from lolcat.
V/WifiStateTracker( 134): Connection to supplicant established, state=SCANNING
D/NetworkStateTracker( 134): setDetailed state, old =DISCONNECTED and new state=SCANNING
V/WifiStateTracker( 134): Changing supplicant state: SCANNING ==> SCANNING
D/ConnectivityService( 134): Dropping ConnectivityChange for WIFI: DISCONNECTED/SCANNING
D/SettingsWifiEnabler( 187): Received wifi state changed from Enabling to Enabled
I/wpa_supplicant( 550): CTRL-EVENT-SCAN-RESULTS Ready
thanks in advance for any help.
I know some people may have discussed this issue but I haven't got an answer yet.
Similar to others, my phone sleeps with Wifi on and after an hour or too, Wifi is disconnected when I woke the phone up. Note I have already set the Wifi sleep policy to "Never".
So i went into the log and saw these:
D/WifiService( 85): acquireWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
D/WifiService( 85): releaseWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
D/ConnectivityService( 85): ConnectivityChange for WIFI: DISCONNECTED/FAILED
V/ConnectivityService( 85): Attempt to connect to WIFI failed.
D/WifiService( 85): acquireWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
D/ConnectivityService( 85): Dropping ConnectivityChange for WIFI: DISCONNECTED/SCANNING
D/ConnectivityService( 85): ConnectivityChange for WIFI: CONNECTING/CONNECTING
D/ConnectivityService( 85): Dropping ConnectivityChange for WIFI: CONNECTING/AUTHENTICATING
D/ConnectivityService( 85): Dropping ConnectivityChange for WIFI: CONNECTING/OBTAINING_IPADDR
D/WifiService( 85): releaseWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
D/WifiService( 85): acquireWifiLockLocked: WifiLock{NetworkLocationProvider type=2 binder=[email protected]}
D/ConnectivityService( 85): ConnectivityChange for WIFI: DISCONNECTED/FAILED
V/ConnectivityService( 85): Attempt to connect to WIFI failed.
then it kept looping these, for so many times:
D/WifiService( 85): acquireWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
D/WifiService( 85): releaseWifiLockLocked: WifiLock{NetworkLocationProvider type=2 [email protected]}
are there any good samaritans who can help me with this piece?
no one else has any comment on this?
actually i asked my friend to try to same thing, let the phone sleep at home (he got also the iphone as main phone, ha) so he left his N1 at home on, and the phone stayed connected to wifi the whole time.
so i tried to eliminate factors between his and mine.
1. we both use the same router
2. he uses STOCK home, I use Launcher Pro / Sweeter Home 2
I am just wondering, if using Launcher Pro / Sweeter Home, which I found out both of these theme takes up quite a big deal of CPU usage (i am not sure) or RAM (i am sure, as they restart themselves sometimes and I checekd logcat and found out they restarted because of insufficient VM), would this be the problem of Wifi Cutting Off?
please help?
Check MAC addresses, bet his starts 00 and yours starts 38
Rusty! said:
Check MAC addresses, bet his starts 00 and yours starts 38
Click to expand...
Click to collapse
thanks for the reply.
why would you think so? i am not a tech guy so I am not sure
but i checked and my MAC address start with 00 (Wireless MAC Address: 00-13-xx-xx-xx)
and my previous Hero worked sleeplessly before.
its just this N1 with all those home replacement that might be suspicious?
There is a big thread on wifi sleep issues, mostly folks with 38 suffer and 00 don't. Probably best to have a read: http://forum.xda-developers.com/showthread.php?t=731395
Rusty! said:
There is a big thread on wifi sleep issues, mostly folks with 38 suffer and 00 don't. Probably best to have a read: http://forum.xda-developers.com/showthread.php?t=731395
Click to expand...
Click to collapse
thanks man, i will head over and take a look.
usually my phone's wifi drops after an hour or so, not like 15 min.
but anyway, let me do some more test
and try to get wifi fixer to see if it helps.
Hey has anyone tried connecting to a windows VPN using PPTP on Galaxy S I9003 (android 2.2.1) and not suceeding?
I've traced the problem down to this log:
.
.
.
I/SProxy_mtpd( 2139): Stop VPN daemon: mtpd
D/SProxy_mtpd( 2139): mtpd is stopped after 0 msec
D/SProxy_mtpd( 2139): stopping mtpd, success? true
I/SProxy_racoon( 2139): Stop VPN daemon: racoon
D/SProxy_racoon( 2139): racoon is stopped after 0 msec
D/SProxy_racoon( 2139): stopping racoon, success? true
D/VpnService( 2139): Local IP: 192.168.0.9, if: tiwlan0
D/VpnService( 2139): VPN UP: down
I/SProxy_mtpd( 2139): Start VPN daemon: mtpd
D/SProxy_mtpd( 2139): mtpd is running after 0 msec
D/mtpd ( 3662): Waiting for control socket
D/SProxy_mtpd( 2139): service not yet listen()ing; try again
D/mtpd ( 3662): Received 20 arguments
I/mtpd ( 3662): Using protocol pptp
I/mtpd ( 3662): Connecting to 192.168.0.1 port 1723
I/SProxy_mtpd( 2139): got data from control socket: 20
I/mtpd ( 3662): Connection established (socket = 16)
D/mtpd ( 3662): Sending SCCRQ
D/mtpd ( 3662): Received SCCRP -> Sending OCRQ (local = 12414)
I/mtpd ( 3662): Tunnel established
D/mtpd ( 3662): Received OCRQ (remote = 8000)
I/mtpd ( 3662): Session established
I/mtpd ( 3662): Creating PPPoX socket
F/mtpd ( 3662): Socket() Address family not supported by protocol
.
.
.
which is the source of the problem, does anyone have any idea what can be done to fix it?
In a dark back alley of my mind, there's a memory of a tweak at least in the speedmod kernel. It's about VPN or something else about networks.
I don't know whether the kernel is even compatible but maybe reading up on that can give you some more information.
good luck
A lot can go wrong with VPN.. can you access it from pc?
I'm seeing this as well. Trying to connect to StrongVPN from CM7-03232011-nightly. I can connect to this VPN with Windows and Linux.
Thanks man, I'm now tryin' to figure out the compatibility issues
Auzy said:
A lot can go wrong with VPN.. can you access it from pc?
Click to expand...
Click to collapse
@Auzy:
I can connect through PC. This log snippet confirms that something is missing in socket framework of this firmware. Moreover, a friend of mine has Galaxy S I9003 and I did the same procedure on his phone and the log shows smooth progress of the same VPN host, so there is something wrong inside and I'm trying to dig it. Since the phone is released pretty recently, there are few resources which can be relied upon. Even CWM does not support this phone yet.
Having the same problem.
Hamid, I guess you are from Iran like me. It must be a problem with middle eastern firmwares because I don't see anyone else complaining.
I took my phone to ParsMicrotel guarantee services and they couldn't help.
Did you had any luck solving this problem?
I don't know if it's just the Middle-East firmwares or not. I live in Kuwait, and I had the same problem with the stock Middle-East firmware that came on the phone, so I flashed one of the other ROMs available from samfirware.com , I9003XWKB1, and got the same result. Since the phone was new I completely wiped the phone before and after the firmware upgrade. I still had the same problem. So then I tried the newest European ROM, I9003XXKB3. Again, wiped the phone before and after the flash, as well as cleared the dalvik cache...........same problem. I have tried connecting via 3G as well as Wi-fi with no luck. I know it's not the ISP since I can connect using my computer, even when using the i9003 as a mobile AP. Also, a co-worker of mine has the i9000 on the same network and I am able to connect to the VPN on his phone using either PPTP or L2TP/IPSec PSK VPN. I think it may be something with either the phone hardware, or maybe a bug in the phone baseband software.
Has anyone been able to connect to any type of VPN using the i9003?
Hi,
I am trying to get my chromecast to connect to the 7800N router but it wont connect and im starting to pull my hair out.
I'm running the device on an extender and I have changed some settings but still no luck. eg
Wireless multicast forwarding = disabled
802.11g and N on channel 13. I do this because other networks in the area clash on lower channels.
igmp snooping = enabled
igmp proxy = disabled
upnp = enabled (port 2800)
I was wondering if there are any other settings i should check?