ACEPC Mini PC Windows & AV IN - MTCB Android Head Units General

Given that most or all of the MTCB units have a AV in option, would it be possible to connect a mini pc and use the screen as the display and would the touch screen fucntion still work ???
I've given up hope on this thing working properly so I'm thinking out the box now, failing that I'm gonna scrap it and buy a branded headunit.
Cheers

DylanHarper said:
Given that most or all of the MTCB units have a AV in option, would it be possible to connect a mini pc and use the screen as the display and would the touch screen fucntion still work ???
I've given up hope on this thing working properly so I'm thinking out the box now, failing that I'm gonna scrap it and buy a branded headunit.
Cheers
Click to expand...
Click to collapse
Unless your head unit exposes the touch screen on an interface you can connect to, it won't work

Related

Logitech Dinvo Edge BT KB, working anyone?

Is there a way for me to use a regular PC Bluetooth keyboard for my TyTN II?
I have this keyboard that would really work well with the device.
It would prove to be a really cheap alternative to the keyboard that is made for the PDA's, plus, it would make alot of things alot easier.
I would assume you must make a program that can read the signals made by the keyboard, but is this possible?
Any help would be greatly appreciated
Bluetooth is Bluetooth, no? What happens when you try to pair the two devices? That's a sweet idea, by the way.
I think this might interest you as well. There's a way to connect a BT mouse to WM devices. I found it on Handango.com, although, strangely, it doesn't show up if you select the AT&T Tilt as your device (but it does show up with any WM5 device).
BlueMouse
I'm going back to grad school soon, and am loving the prospect of carrying 3 small devices that (almost) do the same thing as one heavy laptop!
EDIT: Just read through this thread, and WM6 actually has native support for BT mice! Except for Microsoft's own BT mice... lol. However, I think BlueMouse supports them.
Have a look at this link for a cheap alternative :
http://www.amazon.com/Stowaway-Ultra-Slim-Bluetooth-Blackberry-Handhelds/dp/B0002OKCXE
Buy it while stocks last, I would have brought one but I live in the UK and shipping will be too expensive along with any other taxes they may want to add unless one of you guys can send me one.
Pairing
I have a Logitech bluetooth keyboard with an integrated touchpad. But when I try to pair them, my device just doesn't find the keyboard.
Although I find it amusing, I believe it is even slower using a bluetooth mouse for my phone, than actually using the touch function
But we are atleast on the right track.
For now, I use pocket controller for using my keyboard. But the downside is that it's slow and you need your device connected to the computer at all times.
Imagine using a regular bluetooth keyboard! What a dream ^^
Have you tried using a regular bluetooth keyboard that doesn't have an integrated touchpad? There could be something about that configuration that WM can't handle.
Tec1106 said:
Is there a way for me to use a regular PC Bluetooth keyboard for my TyTN II?
I have this keyboard that would really work well with the device.
It would prove to be a really cheap alternative to the keyboard that is made for the PDA's, plus, it would make alot of things alot easier.
I would assume you must make a program that can read the signals made by the keyboard, but is this possible?
Any help would be greatly appreciated
Click to expand...
Click to collapse
Assuming your PC BT keyboard supports the HID profile (it probably does), it should work with the Kaiser right out of the box, as the WM6 Bluetooth stack has HID drivers built-in.
Connecting
3waygeek said:
Assuming your PC BT keyboard supports the HID profile (it probably does), it should work with the Kaiser right out of the box, as the WM6 Bluetooth stack has HID drivers built-in.
Click to expand...
Click to collapse
Ok. Now my device actually finds the keyboard, but I can't connect it. When I click connect, it asks for a password. I enter nothing, and it continues to where I can select the purpose for the keyboard. When I press finish, my device tells me that the keyboard wants to connect to my phone. Now I need a password to continue, so therfore I enter a random password, like 1111. Then my device waits for a few minutes, and tells me the keyboard has failed connecting.
I have a DiNivo Edge keyboard, if it's any help
Any ideas?
Thx ^^
Maybe...
Maybe I need a specific code, or a way to make the keyoard agree to the connection.
Difficult
Try 0000 -- that's almost always the default password for BT devices.
3waygeek said:
Try 0000 -- that's almost always the default password for BT devices.
Click to expand...
Click to collapse
Thank you, but I've already tried it. The keyboard behaves like a phone, making my phone waiting for the keyboard to input a password. Damn :\
Tec1106 said:
Thank you, but I've already tried it. The keyboard behaves like a phone, making my phone waiting for the keyboard to input a password. Damn :\
Click to expand...
Click to collapse
Sorry this may seem stupid, but have you got the user maual for the keyboard? Or tried the manufacturers site if not? They may have a general config for it (PC and WM device association key will be the same).
Otherwise, look around the keyboard (and even in the battery compartment of the keyboard) for a four digit number to try.
Farsquidge said:
Sorry this may seem stupid, but have you got the user maual for the keyboard? Or tried the manufacturers site if not? They may have a general config for it (PC and WM device association key will be the same).
Otherwise, look around the keyboard (and even in the battery compartment of the keyboard) for a four digit number to try.
Click to expand...
Click to collapse
No, it doesn't sound stupid Sometimes even the smartest person forgets the simpliest resolutions
But I have already tried that, except for the battery compartment. I have no idea how to open it, cause it's an internal rechargeable battery. But if there is an opening somewhere, I'll take a peek inside for a four digit number
Thanks!
Been looking ...
... everywhere on the net, but still haven't found a way to connect the keyboard :\ Anyone that has the DiNivo Edge keyboard, and could help me with this? It would be more than appreciated
Thank you!
Nothing works
I'm giving up
Tec1106 said:
I'm giving up
Click to expand...
Click to collapse
Don't,
I've looked up the Logitech Dinvo Edge and it looks as if it comes with a proprietory BT USB dongle for PC connection and all setup is done through an install CD (for the PC).
Do you have the CD because the 4-digit pin may be on the setup instructions. Failing that, it may be best to go to your first post on this thread and edit the title to be a bit more specific such as ' Logitech Dinvo Edge BT KB, working anyone?'
Give it a go.
Farsquidge said:
Don't,
I've looked up the Logitech Dinvo Edge and it looks as if it comes with a proprietory BT USB dongle for PC connection and all setup is done through an install CD (for the PC).
Do you have the CD because the 4-digit pin may be on the setup instructions. Failing that, it may be best to go to your first post on this thread and edit the title to be a bit more specific such as ' Logitech Dinvo Edge BT KB, working anyone?'
Give it a go.
Click to expand...
Click to collapse
Now, two months later, I am still clueless about how to get this working. Anyone having better luck than me?
I think you should enter your own passcode first on your PDA, and quickly typing the passcode on your BT KBD while PDA is waiting..
I could connect with Apple BT, Microsoft BT kbd..

9.2" touchscreen headrest monitor

Assuming the USB input for the touchscreen works with the Athena, this could be a nice in-car dash accessory. It would make GPS/map use really sweet, and phone dialing easier. $195.
Anyone want to test it?
http://www.digital4cheap.com/Shop/Control/Product/fp/SFV/31341/vpid/3917049/vpcsid/0/rid/124129
that would be pretty cool
I keep talking myself out of buying it. At $195 its almost cheap enough to get even if the touchscreen part didn't work with the Athena... but then I would talk myself into getting a mini-PC, and at that point I could have just bought a cheap laptop.
techntrek said:
Assuming the USB input for the touchscreen works with the Athena....
Click to expand...
Click to collapse
as long as the usb output act's like a standard pc mouse it works. and thats where the problem starts the manual (see the grey box at right side at the bottom) says somthing from 'install the usb drivers first!' so i think there is no luck with these thing. elsewhise a cool idea as an addon in the car.
greet's mad
I figured it would come down to a driver issue for the touchscreen. Still an off-chance it might work out-of-the-box, or that the company offers a WM driver.
for me, i think that would be a bit expensive, i bought a car headrest monitor at Eonon.com, which just need $175USD!

Kaiser and Power Point

Does anyone know if it is possible to use Kaiser to project a power point presentation, bypassing the need for a laptop, and without the use of an intermediate device like the Margi PDA presenter? I read that the new HTC phones may be able to do that, if so is this a software or special hardware wiring? is it a function of the device being VGA or qVGA display? I would appreciate an explanantion by one of the experts.
You are hearing about a technology that hasn't yet been released... it will be a micro projector built into the phone or as an ipod sized accessory.
researchermd said:
Does anyone know if it is possible to use Kaiser to project a power point presentation, bypassing the need for a laptop
Click to expand...
Click to collapse
If you mean the sort of video output dongle thats possible to use with the Touch Pro and other devices, no it won't work if used with the Kaiser. I've not tried it with my Kaiser, I've just read it here somewhere on XDA-DEV that it doesn't work with a Kaiser.
I am talking about the ability of the new devices e.g. Fuze to connect directly to a TV or slide projector using a special cable from the mini USB on on one end and has RCA connections on the other to attach to the external display device. See this:
http://www.htc.com/us/product.aspx?id=58080
Kaiser doesn't support/have the TV Out feature, this was asked and explain before, just search the kaiser forum and you will get your answer.
DG

Which OBD2 adapter?

I have old OBD2 v1.5 adapter. Chinese, big one. Which pairs with HU and works well.
I wish to buy new one, that call 'mini'. I know I have to look for v1.5 (as 2.1 is a crap) and with PIC18F25K80 chip.
But I read that even much of these new mini are PIC based, that have some strange Mac address like AA:BB:CC:11:22:33.
Anyone has experience with such adapters? Do they pair and work with Torque on our HUs?
If anyone is using such an 'mini' adapter, please post link to eBay/AliExpress where you purchased it. Will be very grateful (and it may help other people here, too, as many have issues pairing/using crap adapters).
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
PekeMM said:
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thank you for sharing. I was not considering USB option, but it sounds interesting.
I see you both the 'big' one (same as my old one). And they really work very good.
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving. Here is obe model I consider
Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
There are 2 models of these (not colours): old design with 2 PCB boards, and new one with just 1 board. I wonder if anyone has any of these?
pa.ko said:
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving.
Click to expand...
Click to collapse
:silly: I do not see the problem there as if you checked both links from my post you would see that I use extension cable that do not have issue with connector position. Mine is located right above gas pedal so I could not drive car normally with any OBD Adapter unless I used extension cable.
pa.ko said:
Here is obe model I consider Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
Click to expand...
Click to collapse
PIC is programmed micro controller and not actual ELM327 see https://www.elmelectronics.com/products/ics/obd/ and v1.5 nor v2.1 exist officially as they are clones and you should use https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier to test actual model and support.
Re which one: I ordered 6 different models and kept two that worked flawlessly with my car 1 was broken (got refund) and resold other 3 to get my money back.
PekeMM said:
I personally bought so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
How did you mod this?
gazenbeek said:
How did you mod this?
Click to expand...
Click to collapse
It is fairly simple MOD:
1. Soldered positive wire of lighter connector that have power only when Ignition is turned on.
2. Bought FLAT cable that I can easily cut the wires like in picture s-l1600.jpg
3. Cut Wire on pin 16 BAT power see ODBII%20Master%20Pinout.jpg
4. Connected wire that goes to OBDII to Positive wire I prepared in step 1
5. Connected OBDII to connector from FLAT CABLE
6. Connected USB to HU SINGLE USB CABLE
7. Tested if all works with Toque
8. Used cable ties to secure all cabling behind dashboard
and now I enjoy the all the diags on HU
PekeMM said:
so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
To change BATT to ACC, is that just so it's ' done properly'?
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
abbots said:
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
Click to expand...
Click to collapse
Glad I helped someone
abbots said:
To change BATT to ACC, is that just so it's ' done properly'?
Click to expand...
Click to collapse
Yes, it is safe no issues at all
abbots said:
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Click to expand...
Click to collapse
It is not the problem that it drains a ot but all small drains can pile up so eventually you have a problem. I have park mode security enabled on my dashcam system so it drains some, OBDII can drain a littl, but it is known that in some cases keeps ECU awake that can drain a lot due teh number of sensors it keeps awake also
abbots said:
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
Click to expand...
Click to collapse
All was ECU side due the different pinouts see my pics, I have seen in the past several USB -> COM chips that are not supported on Android due the OEM build and specific drivers like some factory that are not recognized on laptop till you install their licensed software (Usually JUNGO Based Drivers).
---------- Post added at 00:24 ---------- Previous post was at 00:20 ----------
abbots said:
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
Click to expand...
Click to collapse
Only if you got specific cables with canbus decoder (black little box). even then USB OBDII is used to diagnostic and clear codes. I use Toque 1.83 and it works on one unit that v1.52 didn't worked with. Usually ELM v1.5 works better than v2.1
thanks! I have now got USB OBD unit 1.5 (still need splitter/extender), tried yesterday with Torque as well as with Palmer's DashCommand:
it kinda worked - during first trip, 45min, Torque app crashed twice or more, worked after restart, on return trip, DashCommand also choked once or twice, thenm I relaized, as fuel tank level is not reported, unless I run app 100% of the time, fuel consumption won't be correct - and, realsiticall, I need TomTom on the screen more than gauges....
I see there are OBD spliters that 'allow' two or three OBD devices plugged in, wouldn't you know, is it OK to split/use multiple OBDs ?
like, I have TomTom 'Curfer' OBD data logger - just logs 'quality of driving", thoiught to get splitter to log data, AND, if so desire, call gauges on screen ?
thanks for explaing CANBUS!
do you use TPMS tyre pressure units, if so, which ones ? my radio has an app to read such, wonder if it's worth it ?
I have connected my USB OBD. Torque not recognised device. How to check that Scanner is properly installed on android system?
OBD scanner is generic just like this:
https://www.amazon.co.uk/ELM327-USB-Interface-Diagnostic-Scanner/dp/B00IWLLX1Y
BTW I have MTCE with android 8.0 with KLD MCU.
Torque lite ain't work with android/usb, only in bluetooth mode.
I have torque pro so there is no problem there.
Any way problem solved. Bought Bluetooth version.

CarDroid Car PC - What is this?

https://www.indiegogo.com/projects/cardroid-car-pc-android-auto-usb-computer-dongle#/
Is this just a basic Android device using some mirroring software? Would it be possible to do this with a phone?
CarDroid is not a mirror dongle. The link shared has a comparison chart. Mirroring dongles don't have their own operating system and you are pretty much stuck with Android Auto.
The CarDroid is an alternative to Android Auto as it has its own operating system and memory. Also, it doesn't require you to pair with your phone to "mirror" content on your screen. Apart from connecting to BT/Wifi, your phone is basically "set free" and not required to operate CarDroid.
Is it real? Safe to buy?
cesar2010 said:
Is it real? Safe to buy?
Click to expand...
Click to collapse
I bought it this weekend. I hope it will be shipped...
Fishcat7 said:
I bought it this weekend. I hope it will be shipped...
Click to expand...
Click to collapse
Here as well.
Let's see what happens with this thing.
take a video about using
at least on my car, I can not be connected to the car with Bluetooth and android auto at the same time. This could be an issue for me.
Witam i jak urządzenie dotarło? Jak działa jakieś filmiki?
There is this Italian video but it is not too much...
Hi guys,
I received this thing and I must say I am disappointed.
Concept is great and to be honest this is clone of Korean Fine Drive AI 2.
But as RayBomb says device hijack your Bluetooth connection with headunit and you cant use phone just for calling over headunit.
The other big issue is non functional GPS (or missing one I'm not sure).
The project owner is trying to override this with some workaround with GPS tether from your phone but in that case you don't need this device at all.
And cherry on the top.
While flashing it with new firmware it just stopped and now I have something nice looking usb stick.
Device is probably in boot loop and nothing cant see it on usb port. I would feel better if this was my first flashing. When I think a little it is my first time to flash something regular. Since today I was only flashing custom roms and rooted devices and something like this never happened.
My advice is to stay away from this.
Better investment is to make your dedicated AA phone or just to buy phone and root it and install screen2auto what actually I did and it is working like a charm. Bugger is that you need to connect your phone every time with cable but even that is better than non functional device like this.
Only my 2 cents.
Interesting, I'm going to keep my eye on this. It seems like it has potential if they can get the bugs worked out.
I'm using Screen2Auto on a 2 phone setup because I don't want to root my main phone, but it has some problems. Hopefully, they'll get this working.
If they can get it working as intended would you be able to do a Google Assistant search for a phone number and have it make a phone call through your phone?
It's a scam ...
https://www.reddit.com/r/AndroidAuto/comments/m1py7p
...
I can confirm that Cardongle is removing critical reviews and negative comments from their Indiegogo comment section so that they can appear more legitimate and awesome.
DevAuto said:
It's a scam ...
https://www.reddit.com/r/AndroidAuto/comments/m1py7p
...
I can confirm that Cardongle is removing critical reviews and negative comments from their Indiegogo comment section so that they can appear more legitimate and awesome.
Click to expand...
Click to collapse
Exactly like you said.
I was the one refunded and removed after few comments they didnt like.
On their forum also lot of my comments are removed and as I sad I was the one who bricked device. My first brick after so many years without any chance to revive it.
Only thing I regret is that I didnt backed all apps from device with app monster because I like the feature you can use your own launcher like you are on your phone. No annoying AA with his launcher and restrictions what app you can use even when you patch it.
If your device is still alive can you investigate how did they do it yo use AA on headunit as a screen.
Sorry for my bad Enlish but I hope you understood what I meant to say.
CarPC AADongle add Android, GPS, 4G Mini PC to Car
Add Mini PC to Car. Download apps like Netflix from Playstore & emulate games. With GPS & 4G Option | Check out 'CarPC AADongle add Android, GPS, 4G Mini PC to Car' on Indiegogo.
www.indiegogo.com
Any news about this scam ?
GPSSlovakia said:
CarPC AADongle add Android, GPS, 4G Mini PC to Car
Add Mini PC to Car. Download apps like Netflix from Playstore & emulate games. With GPS & 4G Option | Check out 'CarPC AADongle add Android, GPS, 4G Mini PC to Car' on Indiegogo.
www.indiegogo.com
Any news about this scam ?
Click to expand...
Click to collapse
That appears to be different from the CarDongle but it looks similar.
Google CarPlay AI box. They use the wired CarPlay interface to project an Android OS on the car's infotainment screen. They are available now and have more features.

Categories

Resources