Related
I recently destroyed my OM headphones that came with the phone and had the arduous task of finding a compatible headset that offered quality and functionality.
I found out that these do not work
iBeats Dr Dre edition- mic does not work and volume buttons do not work (100)
Skull Candy- Mic does not work but the play and pause buttons do(60)
and finally the one that did work
V-moda vibe duo- full functionality but only comes with an answer button which does play an pause. (100)
feel free to add your experience with purchased headsets
Sound quality was the best on V-moda, then iBeats, then skull candy
Skull candy is a company and not a specific headphones... they have many models. As for the skull candy full metal jackets, the mic does work. I cannot compare them to the others mentioned, but the sound is very good.
My Marshall Minors work on the focus. Not the cheapest but they are pretty cool looking and sound great.
this might be a little late but I need some new headphones for use at work and do not want to spend a lot. I searched "ehs60annbe" on amazon and found plenty of merchants selling what appear to be the exact headphones that come with the phone.
These ones are $6.83 +free shipping
http://www.amazon.com/Samsung-EHS60...EEZO/ref=sr_1_1?ie=UTF8&qid=1299825988&sr=8-1
I lost my pair that came with the phone, so I was excited to see these.
I ordered a pair and they should arrive tomorrow.
If they are indeed the same as those that came with the phone, I might order me a couple more - I really liked them, and they worked perfectly with the phone (control wise).
Thanks for the post.
hapa papa said:
this might be a little late but I need some new headphones for use at work and do not want to spend a lot. I searched "ehs60annbe" on amazon and found plenty of merchants selling what appear to be the exact headphones that come with the phone.
These ones are $6.83 +free shipping
http://www.amazon.com/Samsung-EHS60...EEZO/ref=sr_1_1?ie=UTF8&qid=1299825988&sr=8-1
Click to expand...
Click to collapse
Unfortunately I'm having problems with these headphones - for some reason, the controls will only increase the volume - you can't decrease the volume.
Perhaps I received a "bad" pair? Anyone else tried these?
The Focus has a VERY clean audio output. I've fed it into my home stereo and was impressed with the detail and clairity. I listened with Etymotic 6i headphones and was blown away. After that, the included headset sounds muddy with a artificial bass boost.
For those who can afford to splurge on a headset, consider the Etymotic mc3
Any recommendations for matching the original pair that came with the Focus?
My priorities:
-Must be able to trigger voice control
-Must have working microphone
-Must be able to answer/hangup calls
-Must have volume up and down
-Must not be expensive
-Should be gel like for in-ear
I've tried iPhone ones, they don't do volume/up down.
I've tried tried the common silver Samsung one with one button - the button doesn't pick up or hangup calls.
Help!
This ones looks identical to the oem ones and they are pretty cheap!:
http://cgi.ebay.com/In-Ear-Headset-...090511?pt=PDA_Accessories&hash=item20b64777cf
http://www.wpcentral.com/klipsch-working-wp7-compatible-headphones
Headphones that WILL be fully compatible with wp7, and sound pretty decent as well.
Though it will probably be a few more months until they are released.
Anyone had any luck finding headphones with working volume and answer call buttons? Preferably ones with a more sturdy cover over the connector since my cable broke because of too much twisting and bending.
jkimrey said:
Unfortunately I'm having problems with these headphones - for some reason, the controls will only increase the volume - you can't decrease the volume.
Perhaps I received a "bad" pair? Anyone else tried these?
Click to expand...
Click to collapse
jkimrey, Did you find a solution? I have the same problem. I read somewhere that it's because Samsung is using a newer standard that allows for TV Out or something. But this is really annoying.
same here i cant find any that the buttons fully work on, that i'm willing to buy. I got some on amazon that only volume up works. my wifes blackberry ones that came with her torch work but i cant find them anywhere. The cat ate my original ones
jkimrey said:
I lost my pair that came with the phone, so I was excited to see these.
I ordered a pair and they should arrive tomorrow.
If they are indeed the same as those that came with the phone, I might order me a couple more - I really liked them, and they worked perfectly with the phone (control wise).
Thanks for the post.
Click to expand...
Click to collapse
I can say that these are the ones i got from amazon same thing with the button... It doesnt even look the same as the OEM ones.
Has anyone tried the Zagg Smartbuds? they appear to have all the controls that one could want [play/pause, skip FW/BK, Volume, answer/hangup(I assume would work with voice activation as well)] but they are a bit pricey.
Am I the only one who would like a non-in ear headphone that works with the Focus?
At this point, I just want something that's compatible! I have had zero luck so far in getting earphones compatible with my Focus. I too found the common Samsung ones. Thankfully, I got two pairs for less than $10. Guess what they work perfectly with? My effing iPod touch. GAH.
I honestly have no idea why this is so hard...
V-Moda =
I have to second the V-Moda headphones. I'm currently using them in conjunction with Monster replacement foam tips (medium) and the sound is amazing (albeit the highs are a little muffled but the bass is punchy and responsive). It is a one button setup which bothered me at first, but with a dedicated volume rocker on the device it's really not so much of an issue that I thought it would be. If the Focus only had an equalizer of some sort to bring out the highs, these headphone would be perfect. The mic quality in the headset is beautiful and these 'phones are as durable as all heck (they've been: stuck in a car door for 50 miles, went through the wash, stepped on, trampled, chewed on by a dog, caught on bushes etc.) and have never even began to show signs of wear. If you can live with pocket adjusting the volume, I would recommend getting these.
I should probably mention that I DO NOT work for V-Moda despite how it sounds... I just happen to be a sort of audiophile and while the Focus itself doesn't have the BEST sound quality (I'm coming from a Cowon S9 lol) these heaphones help to bring out its above average playback capability. Another side note is that in response to the OP, the Modas don't only pause/play/answer call/hang up. While listening to music playback you can double tap the button to skip to the next song or triple tap it to skip back.
Entegy said:
At this point, I just want something that's compatible! I have had zero luck so far in getting earphones compatible with my Focus. I too found the common Samsung ones. Thankfully, I got two pairs for less than $10. Guess what they work perfectly with? My effing iPod touch. GAH.
I honestly have no idea why this is so hard...
Click to expand...
Click to collapse
The iPhone headphones work decently. They don't fully work (microphone / volume up and down), but pause / play / next song/ previous song does work. Before the mango update, I was only able to get the play to work. It seems Microsoft is slowly making the iPhone headphones compatible with the Focus.
Diablosblizz said:
The iPhone headphones work decently. They don't fully work (microphone / volume up and down), but pause / play / next song/ previous song does work. Before the mango update, I was only able to get the play to work. It seems Microsoft is slowly making the iPhone headphones compatible with the Focus.
Click to expand...
Click to collapse
Does anybody have a link to a hardware specification for what these in-line buttons actually do for the WP7 phones?
Pretty much all the headphones with in-line controls and a microphone have 4 conductors which are:
- left-audio
- right-audio
- common/ground
- signalling/mic
Here is the spec for IPod Shuffle remote headsets:
pinouts.ru/PortableDevices/iphone_headphone_pinout.shtml
david.carne.ca/shuffle_hax/shuffle_remote.html
So the three buttons operate as follows:
Button 1 - short to ground through 10K resistor (up)
Button 2 - short to ground (answer/hangup/play/pause)
Button 3 - short to ground through 4.7K resistor (down)
But the ipod remote (no mic) has an onboard microcontroller that receives DC power on the mic line as well and is used as a sort of authentication device allowing the Ipod Shuffle to uniquely identify the remote through a challegage response tone scheme. I'm not sure if this is included in the iphone remote cause the circuitry would probably interfere with the mic signal.
Headphones with only one button always short mic/4th conductor to ground so that will always work, but I bet WP7 and Iphone/ipad specs for the resistors for the up/down buttons are different.
I hope WP7 remotes don't have the microcontroller.
I may disassemble my OEM Samsung headphones and try to figure this out. It would be nice to get some Shure or Sennhesier hi-end headphones and plug them into a little adapter that provided to correct buttons. All the hi-end earbuds are iphone/ipad-only.
Presumably I could just cut off the ear-buds on the samsung headphones and solder some of the Shure connectors on there - then just plug in the Shure ear-buds. (all high-end Shure earbuds have replaceable cords
Hello everyone. A few days ago I started having a problem with my cappy, and I can't put my finger on the cause.
My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
In short, Working: In-call loud speaker, sms and calls.
Not working: everything else - music, alarm clock, in-call sound.
In summery, I can't decide if it's a software or a hardware problem.
I'm running CM 10.1 M2 with devil 4.2.
I should also note that I disassembled my phone to try and apply the
"loosen the screw" fix on the speaker assembly with no luck, nothing changed.
I think both. Earpiece and speakers are different devices.
Hardware - earpiece, software - speakerphone alarms, music etc.
One simple idea: take a piece of something thin, like needle and clean 3.5mm port.
I had almost-same issue 1 year ago. just dust formed wool and began shorting contacts inside port.
Yuna said:
I think both. Earpiece and speakers are different devices.
Hardware - earpiece, software - speakerphone alarms, music etc.
One simple idea: take a piece of something thin, like needle and clean 3.5mm port.
I had almost-same issue 1 year ago. just dust formed wool and began shorting contacts inside port.
Click to expand...
Click to collapse
Thank you for the reply. Let me get this straight, you suggest I clean the 3.5mm port even though earphones work fine? (I haven't mentioned this but with earphones, everything works properly).
earphones = headphones = ear plugs? no, not this.
> My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
Your phone has 2 speakers - front, and back.
As i understand, your front speaker (for usual calls) is malfunctioning.
And if you turn SpeakerPhone in call, then you can hear oponent?
Try to clear port, this wont hurt. But might fix issue. You don't need to disassemble phone, wooden match will do too for cleaning.
Just nothing wet, and don't do rough movements inside port.
It's a bit fragile.
gosha100 said:
Hello everyone. A few days ago I started having a problem with my cappy, and I can't put my finger on the cause.
My speaker stopped working. Partially. When I'm on the phone with someone, I can't hear anything from them. If I turn the loudspeaker on, I can hear them just fine. Phone rings and notifies me of smses but I can't hear anything else. I don't hear music or video playing on the phone or the alarm clock.
In short, Working: In-call loud speaker, sms and calls.
Not working: everything else - music, alarm clock, in-call sound.
In summery, I can't decide if it's a software or a hardware problem.
I'm running CM 10.1 M2 with devil 4.2.
I should also note that I disassembled my phone to try and apply the
"loosen the screw" fix on the speaker assembly with no luck, nothing changed.
Click to expand...
Click to collapse
When it happened to me I had to re-seat the ribbon going from the speaker to the sim board. it is very sensitive and I had to do it twice before I got connection back....i just banged the phone around too much and the ribbon lost contact....After the ribbon is seated correctly then just don't tighten that screw too much as it will unseat the ribbon again.
So, gosha.
Anything fixed?
I did as you suggested Yuna, I tried cleaning the 3.5mm port but I'm afraid it had no effect.
Then I disassembled the phone again and as Rmntruexjr suggested, I tried re-seating the ribbon connecting the speaker module to the circuit board several times while the phone is turned on and I'm trying to play music throughout the ordeal. That didn't help either. As previously, ringers work and the loud speaker works but alarm clock, music and the front speaker for calls do not.
Does anyone know if the music and alarm clock are being played by the front or back speaker?
If they are played by the front speaker then the problem is obviously a malfunction in the front speaker and I should just get a new one. Otherwise, there is something weird going on and the back speaker only plays some of the sound and then I can't explain it.
music is played from back speaker.
stupid q: did you checked volume levels?
Yuna said:
music is played from back speaker.
stupid q: did you checked volume levels?
Click to expand...
Click to collapse
Yup. Just to make sure, we are talking about System Settings -> Sound -> Volumes?
However, your question has just made me recheck all the settings and apparently the alarm clock does work!
The current situation is music and front speaker in-call sound doesn't work, but back speaker in call sound works and so do all of the ringers, notifications and alarms.
So, if you play music - no go? Try volume buttons in-playing.
There are 4 different volumes, and 1 hidden.
Front speaker might be broken. Try stock rom, if not helping - service.
And also in call try to adjust volume.
Try kernel with/without voodoo sound. Install/uninstall voodoo sound.
Yuna said:
So, if you play music - no go? Try volume buttons in-playing.
There are 4 different volumes, and 1 hidden.
Front speaker might be broken. Try stock rom, if not helping - service.
And also in call try to adjust volume.
Try kernel with/without voodoo sound. Install/uninstall voodoo sound.
Click to expand...
Click to collapse
No go on the music, same with the volume buttons in call.
As for the kernel, I don't think there is a voodoo and cmc version for the 4.2 Devil kernel (for whatever reason), I only found one version of it - set me straight if i'm wrong.
I'll try rolling back and flashing CM 10.0, i'll see if it helps and report back.
Servicing the phone here is probably out of the question since i897's don't exist in my country, only i9000's so if it comes down to hardware, i'll just order a new speaker module from ebay and install it myself.
But to order, you must be sure its speaker itself.
Sounds like software issue now...
Crazyness...
Рус?
I'm actually surprised the ribbon trick didn't work. I know your issue sounds messed up, but what you describe is detail for detail what I was seeing. It made no sense what so ever to me how for instance no front speaker in call but still speaker phone worked, but then no music, yet alarm works....(i think the ribbon can lose contact on just the right side so you only get some things working).
Sorry it didn't work for you, but it might be worth it to try again if you exhaust all other possibilities. If you do, keep the phone off while trying to seat the ribbon(and make sure the little black fastener is all the way open(up) when inserting the ribbon). Then to test without putting it all back together I used an elastic to hold the battery and tested that way........
If it really does turn out to be the front speaker/jack/sensor unit, I found one last month on ebay for around $2 for a cappy with a bad Jack and it was fairly easy to replace.
For what it's worth, mine stopped working the other day for no reason. Hit it, and now it works. Just something to try (not too hard of course, just a light tap on the hand )
x0ne215 said:
For what it's worth, mine stopped working the other day for no reason. Hit it, and now it works. Just something to try (not too hard of course, just a light tap on the hand )
Click to expand...
Click to collapse
Same issue....That is how mine started...I dropped it one day then I went to play music and the sound would just cut out for no reason it seemed...I could shake or tap on the phone and it would come back on for a while, then nothing again....for me, it was the speaker ribbon.
Ahh that's kinda crappy (no pun intended). As soon as I hit mine, it worked the whole time the phone wasn't bricked .
PS I keep getting outbid on these alltechwholesale auctions by the same guy -_-"
x0ne215 said:
Ahh that's kinda crappy (no pun intended). As soon as I hit mine, it worked the whole time the phone wasn't bricked .
PS I keep getting outbid on these alltechwholesale auctions by the same guy -_-"
Click to expand...
Click to collapse
lol, it's not me I swear....:angel:
You suck lol, thought I'd have an easy fix one with just a bad speaker which I happen to have a working spare for! Damn lol.
Anyway, OP, if you continue to have a speaker problem, did you try swapping it out for a spare one?
Yuna said:
But to order, you must be sure its speaker itself.
Sounds like software issue now...
Crazyness...
Рус?
Click to expand...
Click to collapse
So, I rolled back to CM 10.0 and no change, which means that it's probably a hardware issue, albeit, a very weird one.
And no, Israel.
rmntruexjr said:
I'm actually surprised the ribbon trick didn't work. I know your issue sounds messed up, but what you describe is detail for detail what I was seeing. It made no sense what so ever to me how for instance no front speaker in call but still speaker phone worked, but then no music, yet alarm works....(i think the ribbon can lose contact on just the right side so you only get some things working).
Sorry it didn't work for you, but it might be worth it to try again if you exhaust all other possibilities. If you do, keep the phone off while trying to seat the ribbon(and make sure the little black fastener is all the way open(up) when inserting the ribbon). Then to test without putting it all back together I used an elastic to hold the battery and tested that way........
If it really does turn out to be the front speaker/jack/sensor unit, I found one last month on ebay for around $2 for a cappy with a bad Jack and it was fairly easy to replace.
Click to expand...
Click to collapse
I didn't realize earlier that you had the EXACT same problem so I'll give it another go. It's a good idea with the rubber band, I had to hold the battery throughout the ordeal last time. Even if I order one of these units on ebay now, it'll take about a month to arrive.
x0ne215 said:
You suck lol, thought I'd have an easy fix one with just a bad speaker which I happen to have a working spare for! Damn lol.
Anyway, OP, if you continue to have a speaker problem, did you try swapping it out for a spare one?
Click to expand...
Click to collapse
I'm afraid I tried everything I could which relates to the common Cappy speaker malfunction, that's not it i'm afraid.
I spent 10 days in the desert prior to this malfunction so it's very possible sand caused something (there is sand inside the phone ) or I may have dropped it or something. I didn't want to mention this earlier so I don't throw you guys off straight into a hardware issue.
Well imo hardware is usually an easy fix, so long as it's not the main board (at that point it'd make more sense to just buy a new phone). Open the phone up (don't be scared, there's a tear-down guide on this section w/ pictures), take a can of compressed air, and lightly go over all of the parts inside the phone. Take care not to knock anything out of place. You may also want to re-connect all of the ribbon cables, just in case one came loose (very VERY high possibility). If you need any extra help you can pm me here or shoot me an email (I work in IT and do hardware repairs all the time ).
hey guys, i was wondering if there is a possibility to hack my phone, so my Moto X use the back mic instead the front one?
The reason im asking if someone can help me its because my front mic its totally dead, and thats not the worst part, i went with a dude he say he can fix it, but instead he just stock two of the screws, now, i dont know what to do, and i realize that the back microphone works well, so i was wondering if there is some kind of hack, so the Moto X detects the back mic as the front one, hope you can help me, and sorry for my bad english.
- You sure the front mic is really dead? I didn't understand what you said you tried, but sometimes if people can't hear you the mic might just be clogged and you could try cleaning it, with a swab or compressed air or something.
- You can always fall back on using a headset with a mic, Bluetooth or wired. You could also try speakerphone.
- As for your original question, you might be in luck. Looks like there's a recording app in the play store that claims to be able to pick between front and back mics. The description says:
★ Selectable microphone (front or back/rear)
I haven't tried it myself but you could give it a try. It is a voice recording app, so unless you're really lucky choosing the back mic in the app probably won't carry over to regular calling, but you never know till you try. Try putting the app in the background without closing it, and if that works you can check what happens when you close it.
If that doesn't work don't lose hope. You can try contacting the developer and explaining your situation. He/she/they might be able to help you out.
Link to app: https://play.google.com/store/apps/details?id=yuku.mp3recorder.lite
It works but....
Yep in fact I already try the front mic and the only thing I get from it, is noise, about the app works great but it's not permanent it's just for sound recording, what I want, it's a way to make the phone believe back mic it's front one, so I can use touchless commands again.
Front Mic
Hrhigher said:
Yep in fact I already try the front mic and the only thing I get from it, is noise
Click to expand...
Click to collapse
- Well maybe it's not totally dead, just sick. What is it that you tried? Because if you google around you'll find people have had success cleaning defective mics with toothbrushes, pins, etc. just do it carefully.
- If you have root access on your phone, there is a Nexus 5 build.prop solution that you could try on your Moto X (link below). again, know what you're doing and be careful.
Back Mic
Hrhigher said:
about the app works great but it's not permanent it's just for sound recording, what I want, it's a way to make the phone believe back mic it's front one, so I can use touchless commands again.
Click to expand...
Click to collapse
- Yeah guess there's a built in option that devs can use in their apps to change audio source (link below). But it looks like it only works within that app. And unfortunately there doesn't seem to be an easy way to trigger the change for entire system.
- That said, it might be possible with root access. The method that comes to mind is using Xposed. I'd suggest putting in a request over at the Xposed section (link below). Looks like someone else had the same idea on reddit (link below).
Links
- build.prop solution to front mic (post #169) : http://forum.xda-developers.com/goo...ue-nexus-5-t2538979/post52006598#post52006598
- code to manage audio source: http://developer.android.com/reference/android/media/MediaRecorder.AudioSource.html
- Xposed section: http://forum.xda-developers.com/xposed
- Reddit xposed request (you could add to): http://www.reddit.com/r/xposed/comments/2fysbi/request_change_the_default_mic/
GOOD LUCK.
Hey all,
So I searched the forum and found quite a few headphone port issues discussed, but no mention of my exact problem. And yes, I looked inside my port and scraped around with a toothpick... there is nothing immediately obvious obstructing the port- hence the need for my post
My headphone port seems to be short on depth. I have a pair of headphones with an inline mic. There are perfectly fine for listening to music (they even snap into place as they should). But the mic doesn't work. I don't use that often so i forgot about it.
Well the other day I bought a selfie stick (I know... I know... don't kick me! My fiance and I travel a lot and sometimes it is impossible to find someone to take a photo for you in front of a landmark). I bought a wired one to avoid the battery drain of BT (which I don't use much except in the car). Well, the shutter button on the stick doesn't work with my N6. I have 5 camera apps installed and all have the volume buttons mapped to the shutter...I tried it with my fiance's LG G4 and my old GS2, it works on both of them.
So while trying to trouble shoot this issue, I plugged my headphones into her phone and made a call... low and held, the mic worked. Next I searched the forums and Google and found the issues of clogged ports. Mine isn't. And I used a bright halogen light to peer inside. Nothing but port. So I measured it.
Here is the interesting part, my first measurements just involved watching how far the jack entered the port. I tried my phone, my S2 and the LGG4... the S2 and the G4 both ingested the entire jack. My N6, about 1mm was left out. So I measured by inserting a tooth pick and measuring how far it went in, sure enough, my N6 is about 1mm shallower then the others.
I did find one post here on XDA where people suggested that you had to press very hard to fully insert a jack. I tried, I nearly broke the headphones in the attempt... and no change.
Has anyone else had this exact issue? Were you able to solve it?
Has anyone attempted to replace the port?
Just a bump...
Anyone? TIA
Those mics don't tend to work in most cases if they work on an iphone vice versa, there are converters on dx.com as example. Sony headphones are known to work fine on android phones, I got a sony mdr-1 with an inline mic and controls that works fine on my n6.
If you want I can send pictures of the headphone jack connector when the back panel is removed, my back panel is currently loose after replacing the battery and I'm still waiting for the replacement ^^
seahorsepip said:
Those mics don't tend to work in most cases if they work on an iphone vice versa, there are converters on dx.com as example. Sony headphones are known to work fine on android phones, I got a sony mdr-1 with an inline mic and controls that works fine on my n6.
If you want I can send pictures of the headphone jack connector when the back panel is removed, my back panel is currently loose after replacing the battery and I'm still waiting for the replacement ^^
Click to expand...
Click to collapse
Sure, the photo would be great.
The headphones I have work on two other Android devices, as well as the selfie stick. So it doesn't appear to be a comparability issue with Android.
Thanks!
So,
When I had a Moto X (V2) I asked moto about the volume controls and was told that they did not implement them, as it was not an Android standard feature. My guess it that it is the same with the Nexus 6 (I now use bt headphones, so haven't tried). My guess is that the microphone doesn't work on your headphones (try another set) and that the volume control over the headphone jack is not implemented.
Note10.1Dude said:
So,
When I had a Moto X (V2) I asked moto about the volume controls and was told that they did not implement them, as it was not an Android standard feature. My guess it that it is the same with the Nexus 6 (I now use bt headphones, so haven't tried). My guess is that the microphone doesn't work on your headphones (try another set) and that the volume control over the headphone jack is not implemented.
Click to expand...
Click to collapse
Hey Note Dude.
Thanks for responding. It's an interesting theory, but I have an inline volume control on this headset that does indeed adjust the volume. So, it's really just the mic.
Thanks, though!
Hi! Running OP3T, OOS 9.0.6, simple TWRP/Magisk install with no major fiddling (did it mostly for the adblockers tbh).
A while ago I started noticing the handset speaker would sound really low in a call compared to, say, the phone speaker or wired/bt headphones. I'm not 100% sure when it started happening but I've been trying to solve this for about 3 months now.
It seems to be a common enough issue that it shows up in multiple sites, for instance https://innov8tiv.com/fix-low-call-volume-oneplus-3t-calls/ has several different fixes. I even tracked down the TWRP file they mention here to xda -- https://forum.xda-developers.com/showpost.php?p=72825218&postcount=9 -- but for some reason, none of those fixes work for me. I can't find any of the files they mention I should be editing anywhere or with any of those names, and the link to the TWRP file shows no mirrors. I can't find that file (by that name at least) anywhere else either. I've tried messaging Creeper36 here on xda (he's the guy who posted the original TWRP fix, and he's listed as the file owner on AFH), but no response. I've even tried installing Viper4Android and whilst my headphone/bt experience has improved, that's not really where my problem is, and I can't seem to figure out if/how V4A can even affect in-call volume. I think it's not supposed to.
So I'm running out of ideas and it's really annoying me. It's low enough that every time I get a call I scramble to find some form of headset before I pick up, and that's just annoying as hell. Does anyone please, for the sake of my mental sanity, have a fix for this?
Thanks!
I had this problem on mine and my mother's OnePlus 3T after 3 years use. Turns out the speaker grill is really good at collecting all kinds of scrap. I noticed this as I had ordered two new speakers for the phones, and when I was swapping them up I realized the problem wasn't with the speakers but with all the dirt clogging up the speaker grills tiny holes. After cleaning up, volume level was restored.
But I guess you could do a "dirty fix" by just increasing the volume hoping it will get through, and also hurting the speakers in the process.
Check out my LOS daily builds at https://lineageos.wickenberg.nu
How would you suggest I went about that cleaning? Toothbrush maybe? Slightly wary of poking through something and making it worse...
pqueiro said:
How would you suggest I went about that cleaning? Toothbrush maybe? Slightly wary of poking through something and making it worse...
Click to expand...
Click to collapse
I'd say will need to dismantle the phone and remove the speaker to be able to remove the dirt between the grill and the filter as it's not accessible through the front simply by the means of a brush.
Check out my LOS daily builds at https://lineageos.wickenberg.nu
Hi,
I had this problem when I bought mine, since I bought it used. And it really was just the dirt on the speaker so probably nothing serious. You can get just a simple needle or toothpick and clean it but gently. If it still sounds low then you can disassemble it. Please, let me know if that works for you.
Rather than using something to poke INTO the speaker, is recommend using a vacuum attachment to suck debris out.
If that doesn't work, then disassemble the phone to clean it out. The difference is staggering.