Database Develop

Some Questions about G920T flashing / custom roms

Just bought S6 G920T so i'm still new to all the bootloader security issues, i flashed TWRP yesterday and got stuck on bootloop after that. Bootloop was fixed after flashing Twisted v4 rom. I set up everything including fingerprint and when i restarted the phone it gave the error "Custom Binary blocked by FRP".
Currently i am trying to revive the phone, about to flash 6.0.1 PK5 firmware.
Now i have a few questions, please answer whichever you can:
- In case flashing 6.0.1 fails the next solution is to flash 7.0 firmware, is it possible to flash Twisted v4 (6.0.1) after that? Or i have to go with Nougat roms only?
- What should i know to avoid ever having another FRP lock again with a custom rom? Dont set up fingerprint? Or enable OEM unlock option is enough?
- Any way to permanently disable this Custom Binary lock security feature?
I want to use Twisted v4 with root and fingerprint if possible (dont need Samsung Pay). Sorry if this is a repost, i tried gathering whatever info i could on this issue but still confused on these questions. Thanks in advance! :highfive:
EDIT: Looks like this forum is dead, so i'll just answer my own questions from what i learned today with first hand experience for the next confused soul.
- Flashing 6.0.1 PK5 firmware fixed the FRP lock issue (if you were on newer firmware you will need to flash that one or higher)
- Enable Developer Options by clicking Build Number a few times, in Developer Options allow OEM unlock to avoid "Custom Binary FRP lock"
Now i am using Twisted v4 with root and fingerprint enabled, TWRP is installed and no issues till now.

If root/TWRP is what you're after, is the Tmobile version the friendliest S6 to get?

RunNgun42 said:
If root/TWRP is what you're after, is the Tmobile version the friendliest S6 to get?
Click to expand...
Click to collapse
Yes. The TMobile Galaxy S6 is the last Galaxy model with an unlocked bootloader.
---------- Post added at 10:07 PM ---------- Previous post was at 10:06 PM ----------
killerxda said:
Just bought S6 G920T so i'm still new to all the bootloader security issues, i flashed TWRP yesterday and got stuck on bootloop after that. Bootloop was fixed after flashing Twisted v4 rom. I set up everything including fingerprint and when i restarted the phone it gave the error "Custom Binary blocked by FRP".
Currently i am trying to revive the phone, about to flash 6.0.1 PK5 firmware.
Now i have a few questions, please answer whichever you can:
- In case flashing 6.0.1 fails the next solution is to flash 7.0 firmware, is it possible to flash Twisted v4 (6.0.1) after that? Or i have to go with Nougat roms only?
- What should i know to avoid ever having another FRP lock again with a custom rom? Dont set up fingerprint? Or enable OEM unlock option is enough?
- Any way to permanently disable this Custom Binary lock security feature?
I want to use Twisted v4 with root and fingerprint if possible (dont need Samsung Pay). Sorry if this is a repost, i tried gathering whatever info i could on this issue but still confused on these questions. Thanks in advance! :highfive:
EDIT: Looks like this forum is dead, so i'll just answer my own questions from what i learned today with first hand experience for the next confused soul.
- Flashing 6.0.1 PK5 firmware fixed the FRP lock issue (if you were on newer firmware you will need to flash that one or higher)
- Enable Developer Options by clicking Build Number a few times, in Developer Options allow OEM unlock to avoid "Custom Binary FRP lock"
Now i am using Twisted v4 with root and fingerprint enabled, TWRP is installed and no issues till now.
Click to expand...
Click to collapse
Sorry I missed your post man. I am still rocking my S6 with Twisted Nougat so I could have helped ya out. I do not use the fingerprint option however.

cwhiatt said:
Sorry I missed your post man. I am still rocking my S6 with Twisted Nougat so I could have helped ya out. I do not use the fingerprint option however.
Click to expand...
Click to collapse
Its ok bro, experience is the best teacher

don’t mean to hijack, but
Saw this now after I posted and you’re saying it’s dead (which sucks, but oh well)
Which version were you on before flashing entirely?
Any chance you could lemme know what to google to grab the 6.01 fw? I’ll try that out I guess.
I’m having frp lock and can’t even flash anything it seems, but I’ll try anything.
killerxda said:
Just bought S6 G920T so i'm still new to all the bootloader security issues, i flashed TWRP yesterday and got stuck on bootloop after that. Bootloop was fixed after flashing Twisted v4 rom. I set up everything including fingerprint and when i restarted the phone it gave the error "Custom Binary blocked by FRP".
Currently i am trying to revive the phone, about to flash 6.0.1 PK5 firmware.
Now i have a few questions, please answer whichever you can:
- In case flashing 6.0.1 fails the next solution is to flash 7.0 firmware, is it possible to flash Twisted v4 (6.0.1) after that? Or i have to go with Nougat roms only?
- What should i know to avoid ever having another FRP lock again with a custom rom? Dont set up fingerprint? Or enable OEM unlock option is enough?
- Any way to permanently disable this Custom Binary lock security feature?
I want to use Twisted v4 with root and fingerprint if possible (dont need Samsung Pay). Sorry if this is a repost, i tried gathering whatever info i could on this issue but still confused on these questions. Thanks in advance! :highfive:
EDIT: Looks like this forum is dead, so i'll just answer my own questions from what i learned today with first hand experience for the next confused soul.
- Flashing 6.0.1 PK5 firmware fixed the FRP lock issue (if you were on newer firmware you will need to flash that one or higher)
- Enable Developer Options by clicking Build Number a few times, in Developer Options allow OEM unlock to avoid "Custom Binary FRP lock"
Now i am using Twisted v4 with root and fingerprint enabled, TWRP is installed and no issues till now.
Click to expand...
Click to collapse

p4cm4n88 said:
Saw this now after I posted and you’re saying it’s dead (which sucks, but oh well)
Which version were you on before flashing entirely?
Any chance you could lemme know what to google to grab the 6.01 fw? I’ll try that out I guess.
I’m having frp lock and can’t even flash anything it seems, but I’ll try anything.
Click to expand...
Click to collapse
You can download the PK5 Firmware here > https://www.sammobile.com/firmwares/galaxy-s6/SM-G920T/TMB/confirm/G920TUVU5EPK5/113173/
OR...you can try to use Samsung Kies or Samsung Smartswitch to restore your phone back to stock. You'll need the model and serial number which you can get by booting to Download mode and then pressing the home button. Once you get back up and running on stock firmware you can enable developer options then USB debugging and OEM unlock.
Once you have those taken care of you can root, install TWRP, Xposed, and flash Twisted Nougat.

hate to be annoying, but is there a better place to find this rather than a place that will take 12 hours to dl?
cwhiatt said:
You can download the PK5 Firmware here >
OR...you can try to use Samsung Kies or Samsung Smartswitch to restore your phone back to stock. You'll need the model and serial number which you can get by booting to Download mode and then pressing the home button. Once you get back up and running on stock firmware you can enable developer options then USB debugging and OEM unlock.
Once you have those taken care of you can root, install TWRP, Xposed, and flash Twisted Nougat.
Click to expand...
Click to collapse

p4cm4n88 said:
hate to be annoying, but is there a better place to find this rather than a place that will take 12 hours to dl?
Click to expand...
Click to collapse
Like I said u can try using Kies or Smartswitch. I have used Kies successfully on a handful of S6s without issue. Otherwise I could probably download it tomorrow at work and send you a link.
Sent from my [device_name] using XDA-Developers Legacy app

No worries. I’ll do it overnight. Thanks
Also Odin 3.10.6 started being able to flash where 3.12.? Failed.
I got the baseband you have in your sig I just installed. Still have FRP tho and was told to wait 72 hours.
Mean time my fiancé just bought an iPhone instead.
cwhiatt said:
Like I said u can try using Kies or Smartswitch. I have used Kies successfully on a handful of S6s without issue. Otherwise I could probably download it tomorrow at work and send you a link.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse

p4cm4n88 said:
No worries. I’ll do it overnight. Thanks
Also Odin 3.10.6 started being able to flash where 3.12.? Failed.
I got the baseband you have in your sig I just installed. Still have FRP tho and was told to wait 72 hours.
Mean time my fiancé just bought an iPhone instead.
Click to expand...
Click to collapse
Been away from xda for a while so didnt see your post. Instead of sammobile you can usuallly find firmware on androidfilehost. If you were on 6.0.1 before then you should be able to flash this file:
https://androidfilehost.com/?fid=745425885120707260
if that doesnt work then 7.0 file should work (basically you need the same version that was flashed or updated version, older versions not allowed):
https://androidfilehost.com/?fid=961840155545571517

[OFFICIAL] [TWRP] [SM-G9600] starqlte/chn

ONLY FOR Qualcomm SM-G9600
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
This will trip knox to 0x1, your phones warranty will be voided, flash at your own risk. Also, this process will wipe your personal data!
HOW TO INSTALL:
0. Make sure you enabled developer settings by pressing the build number several times and have the OEM unlock enabled. Also make sure you run CROM from the galaxy apps store to unlock the bootloader.
1. Boot into download mode by pressing: bixby, volume down and power
2. Download the latest Odin version, open it
3. Download the recovery file from below and put it into the AP tab
4. Untick "auto reboot" in odin and flash the file
5. After flashing, boot into twrp. Make sure to NOT allow system to be modified till you disable dm-verity! (otherwise your phone will be stuck at bootloop).
6. In order to fully and properly root, you will need to flash my kernel found here and flash Magisk.
7. To disable encryption you need to flash this RMM_patch+forceencrypt_remover.zip for pie or multidisabler.zip and forceencrypt_disabler_q.zip for Android 10 and format data. (can opt out of the forceencrypt_disabler if you want but internal storage will be inaccessable)
DOWNLOAD:
https://twrp.me/samsung/samsunggalaxys9qcom.html
BUGS:
- Samsung encryption is NOT supported
DONATION:
Via PayPal
https://www.paypal.me/klabit87
Contributors
klabit87
Source Code: https://github.com/klabit87/twrp_android_device_samsung_starqltechn
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 5-22-2019

Good job, as always you do high quality projects.
With GPU prices increasing exponentially over the past few months, it’s been hard to price out a good phone. This particular phone took us nearly a year to see; getting all the parts together was a challenge. (TK, our video producer, delivered the last piece of the puzzle after the Consumer Electronics Show in January.)
Our goal was to show what a decent budget can get you in an Samsung Galaxy S9 Plus, and what kind of performance you can expect from it. Thanks to Travis, Samsung and XDA, we were able to do just that.
Cheers,
Cricrocra.

solid thank you,

work on S9 9600 snapdragon "128gb" ? "C9600ZCU1ARBE" ?

Please Test this new build (June 14th 2018) HKT. https://github.com/travismills82/tw...n/raw/master/twrp-3.2.1-0-starqltechn.img.tar

alittle off topic, but I still dont have OEM Unlock option in Dev mode ive had the s9 more than 7 days. any ideas on what's wrong with that?

So is there no hope for usa unlock?

kushman said:
So is there no hope for usa unlock?
Click to expand...
Click to collapse
USA Models are never bootloader unlockable for S7/8/9 so nope. ONLY SM-G9650 and SM-G9600 are bootloader unlockable models for snapdragon S9/+. Amazon is your friend or newegg.

Where can I find CROM? Can't find it in the Galaxy apps store.

travis82 said:
USA Models are never bootloader unlockable for S7/8/9 so nope. ONLY SM-G9650 and SM-G9600 are bootloader unlockable models for snapdragon S9/+. Amazon is your friend or newegg.
Click to expand...
Click to collapse
Can we possibly Odin a sd stock from another company that's has oem unlock option? Is there a way to get hotspot that what I'm looking for. Is there a way to to about how we've seen for vzw where its stock rooted and inject three odin I mainly just need hotspot and bloat removed that is it any idea how to do so

i have OEM onlock and CROM service, but it doesnt work. I delete my samsung account too, but i have the same error.
help!

Thanks bro!!!!

Thanks for this amazing dev work @travis82
You mentioned the stock kernel but I am confused where to find it. I looked at the threads you have started and found out the combo firmware thread. Do I have to download the kernel from that thread and do I have to extract the img file and then use it? Or am I missing something here. I'm in a bit of a pickle here with my device right now and your reply will help me a lot. Thanks!

droidextra said:
Thanks for this amazing dev work @travis82
You mentioned the stock kernel but I am confused where to find it. I looked at the threads you have started and found out the combo firmware thread. Do I have to download the kernel from that thread and do I have to extract the img file and then use it? Or am I missing something here. I'm in a bit of a pickle here with my device right now and your reply will help me a lot. Thanks!
Click to expand...
Click to collapse
Stock kernel is included in the rom naturally.

travis82 said:
Stock kernel is included in the rom naturally.
Click to expand...
Click to collapse
Okay, my bad
I meant to ask about the stock patched kernel.

fe.floresy said:
i have OEM onlock and CROM service, but it doesnt work. I delete my samsung account too, but i have the same error.
help!
Click to expand...
Click to collapse
I have the same prob, I just activated the OEM unlock, my phone wype my data. Now I want to run CROM, but it fails so, no Idea.....

MCR31 said:
I have the same prob, I just activated the OEM unlock, my phone wype my data. Now I want to run CROM, but it fails so, no Idea.....
Click to expand...
Click to collapse
Well, I just waited to see the "OEM Unlock" Bootloader on the developer options, and I skept the CROM app, and on Odim I just Installed TWRP without any issues.
The prob was when I boot into TWRP and tried to install the custom kernel, TWRP couldn't see my internal storage just tell me "0Mbs" I do not have an extarnal SD card, so I couldn't install the kernel, I restarted the phone with a Data error, so I just format data and back to normal state. I have an 9600 Latin America Version, and I didn't need the CROM apk. Maybe is there a way to fix TWRP to "see" the internal storage.

Bear in mind, this is TWRP 3.2.1-0 and it is so slow that is barely usable

How enable OEM Unlock ? Qualcomm SM-G9600
How enable OEM Unlock ? Qualcomm SM-G9600
MCR31 said:
I have the same prob, I just activated the OEM unlock, my phone wype my data. Now I want to run CROM, but it fails so, no Idea.....
Click to expand...
Click to collapse

adolfomcd said:
How enable OEM Unlock ? Qualcomm SM-G9600
Click to expand...
Click to collapse
you just activate developer option, and after 7 days using your phone, you will see inside developer options the "OEM Unlock" option, just activate it, your phone will wipe all your data partions, and after it boots, you just wait 7 days more, when you see the option "OEM Unlock" activated in developers options, you jusr run odin and install recovery, you do not need CROM (If you phone is latin america version), if it's china, just run CROM.

Cannot find OEM Unlock option

Hello! I need a little help, and I'm hoping someone here has the answer.
I'm trying to install Magisk via Odin 3.13, but every time I try Odin gives me a "FAIL!" message. Now, I'm fairly certain this is because I haven't enabled "OEM Unlock" in my developer options. However, I don't have that option. A guide on this website involved changing my date and time and rebooting, but that hasn't worked. Besides, I've had this device for almost a year anyways.
My device is a Samsung Galaxy Tablet S3
Android version 8.0.0
Samsung Experience version 9.0
Baseband version T827R4TYS2BSA1
Any advice would be greatly appreciated, and if you need more information about the device just let me know. Thanks!

4MalDieHide said:
Hello! I need a little help, and I'm hoping someone here has the answer.
I'm trying to install Magisk via Odin 3.13, but every time I try Odin gives me a "FAIL!" message. Now, I'm fairly certain this is because I haven't enabled "OEM Unlock" in my developer options. However, I don't have that option. A guide on this website involved changing my date and time and rebooting, but that hasn't worked. Besides, I've had this device for almost a year anyways.
My device is a Samsung Galaxy Tablet S3
Android version 8.0.0
Samsung Experience version 9.0
Baseband version T827R4TYS2BSA1
Any advice would be greatly appreciated, and if you need more information about the device just let me know. Thanks!
Click to expand...
Click to collapse
Did you follow the installation procedure provided by the developer?

4MalDieHide said:
Hello! I need a little help, and I'm hoping someone here has the answer.
I'm trying to install Magisk via Odin 3.13, but every time I try Odin gives me a "FAIL!" message. Now, I'm fairly certain this is because I haven't enabled "OEM Unlock" in my developer options. However, I don't have that option. A guide on this website involved changing my date and time and rebooting, but that hasn't worked. Besides, I've had this device for almost a year anyways.
My device is a Samsung Galaxy Tablet S3
Android version 8.0.0
Samsung Experience version 9.0
Baseband version T827R4TYS2BSA1
Any advice would be greatly appreciated, and if you need more information about the device just let me know. Thanks!
Click to expand...
Click to collapse
Magisk with Odin?
OEM unlock is usually in developer settings. Tap build number in about device section A bunch of times to enable.
From there... Yeah read the manual linked in post above.
You can only flash a patched boot.img with Odin. Or a .tar file version of a boot.img

Oswald Boelcke said:
Did you follow the installation procedure provided by the developer?
Click to expand...
Click to collapse
I did, the issue was with the third step, "Flash the zip and reboot." I can't do this without OEM unlock being activated in my tablet's dev options, but it simply isn't there like it should be. Thanks though.

madbat99 said:
Magisk with Odin?
OEM unlock is usually in developer settings. Tap build number in about device section A bunch of times to enable.
From there... Yeah read the manual linked in post above.
You can only flash a patched boot.img with Odin. Or a .tar file version of a boot.img
Click to expand...
Click to collapse
Yeah, what I meant was flashing a TWRP .tar custom recovery via Odin to install Magisk. I'm pretty new to this. I unlocked my tablets developer settings in order to turn on USB debugging. OEM unlock simply isn't there.

did you bought your tab with EMI or subscription based with some operator ? then you will not have this option as it is disabled by service provider

Help with kg state prenormal latest bootloader binary 7 note n950f ! Cant root / twrp

Hi, I flashed via ODIN all 4 files of latest JULY PATCH and after that, I lose root and cant install TWRP, I had OEM UNBLOCK ON before all this, and it still showing OEM UNBLOCK on developers, I tried wiping, flashing others firmwares from others countrys, turned off oem, wiped, go recovery, wiped, install new firmware via odin, still OEM UNBLOCK show on developer and KG STATE still PRENORMAL

NONE REPLY? meh

Hey not sure if any of you on THIS thread could answer my question but my note 8 n950u is not rooted at all but i noticed today that in my stock bootloader i have the option of mount/ system, what would it do if i clicked it? I thought that was only available with a phone that's rooted. Just curious.

truenitos said:
NONE REPLY? meh
Click to expand...
Click to collapse
I really tried to help you, but u seems don't checking you msgs, good luck

Superloud024 said:
Hey not sure if any of you on THIS thread could answer my question but my note 8 n950u is not rooted at all but i noticed today that in my stock bootloader i have the option of mount/ system, what would it do if i clicked it? I thought that was only available with a phone that's rooted. Just curious.
Click to expand...
Click to collapse
Nothing will happen.

truenitos said:
Hi, I flashed via ODIN all 4 files of latest JULY PATCH and after that, I lose root and cant install TWRP, I had OEM UNBLOCK ON before all this, and it still showing OEM UNBLOCK on developers, I tried wiping, flashing others firmwares from others countrys, turned off oem, wiped, go recovery, wiped, install new firmware via odin, still OEM UNBLOCK show on developer and KG STATE still PRENORMAL
Click to expand...
Click to collapse
friend already solved the problem? help please, I have the same problem

Anyone has a fix for this? Can not flash, install twrp, wait 7 days, could not solve. This is a pain in the ass

ZeroXO said:
I really tried to help you, but u seems don't checking you msgs, good luck
Click to expand...
Click to collapse
Hi Can You help me m8?
same binary 7

There os no solution. That's the problem. We are stuck with ****y shamesung !!!

ZeroXO said:
I really tried to help you, but u seems don't checking you msgs, good luck
Click to expand...
Click to collapse
Need help with similar problem, Samsung S8 plus g55f

Iamnon binary 8 which is December update and the **** Samsung is not making kg state to normal or checking stuck at prenormal

General I have successfully installed Eu.rom

after alot of mixed info floating around I decided to take the risk, heres how I did it. Mi 11 Ultra 12/512 china varient
updated device to latest version via updater
unlocked bootloader via miFlash
Downloaded stable 12.5 rom https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
rebooted into fastboot and ran the windows bat file in the command promt
wait about 5-10mins for 1st boot
And magic!
been testing features and as i can see the rom is overall more smooth and polished, Im in th US on Tmobile and still getting 5g, banking apps work, google pay works, no more issues with needing to go into every app to enable notifications, any other questions let me know! now only waiting for root method and TWRP

rambo8987 said:
after alot of mixed info floating around I decided to take the risk, heres how I did it.
updated device to latest version via updater
unlocked bootloader via miFlash
Downloaded stable 12.5 rom https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
rebooted into fastboot and ran the windows bat file in the command promt
wait about 5-10mins for 1st boot
And magic!
been testing features and as i can see the rom is overall more smooth and polished, Im in th US on Tmobile and still getting 5g, banking apps work, google pay works, no more issues with needing to go into every app to enable notifications, any other questions let me know! now only waiting for root method and TWRP
Click to expand...
Click to collapse
How about VoLTE on tmobile ?
And which phone u have

Will you get OTA updates?

rambo8987 said:
after alot of mixed info floating around I decided to take the risk, heres how I did it.
updated device to latest version via updater
unlocked bootloader via miFlash
Downloaded stable 12.5 rom https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
rebooted into fastboot and ran the windows bat file in the command promt
wait about 5-10mins for 1st boot
And magic!
been testing features and as i can see the rom is overall more smooth and polished, Im in th US on Tmobile and still getting 5g, banking apps work, google pay works, no more issues with needing to go into every app to enable notifications, any other questions let me know! now only waiting for root method and TWRP
Click to expand...
Click to collapse
Did you have to do anything else special to get gpay and banking apps to work or they worked right from the start?

Congrats, great to hear it worked out nicely for you ! May I ask which the latest CN version was ? Was ist 12.0.13 or 12.5.2 ?

pafc66 said:
Will you get OTA updates?
Click to expand...
Click to collapse
Xiaomi.EU OTA requires functional TWRP - so presently: no ... you need to install updates via fastboot as well

rambo8987 said:
after alot of mixed info floating around I decided to take the risk, heres how I did it.
updated device to latest version via updater
unlocked bootloader via miFlash
Downloaded stable 12.5 rom https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/
rebooted into fastboot and ran the windows bat file in the command promt
wait about 5-10mins for 1st boot
And magic!
been testing features and as i can see the rom is overall more smooth and polished, Im in th US on Tmobile and still getting 5g, banking apps work, google pay works, no more issues with needing to go into every app to enable notifications, any other questions let me know! now only waiting for root method and TWRP
Click to expand...
Click to collapse
thats great new bro! After unlock bootloader did you turned on ur phone and did you do any steps? I mean can you guide me step-by-step what to do after unlock via miunlock, thanks!

avetny said:
How about VoLTE on tmobile ?
And which phone u have
Click to expand...
Click to collapse
yes yoiu just need to enable it with a dailercode
avetny said:
How about VoLTE on tmobile ?
And which phone u have
Click to expand...
Click to collapse
yes you have to enable it via phone dialer
https://www.reddit.com/r/Xiaomi/comments/cjuax5
i have the china varient mi 11 ultra

pafc66 said:
Will you get OTA updates?
Click to expand...
Click to collapse
not automatic as of now, but its easy enough to download from eu forums and flash via fastboot until we get twrp

sc954rr said:
Did you have to do anything else special to get gpay and banking apps to work or they worked right from the start?
Click to expand...
Click to collapse
worked right out the gate eu roms have google service running soon as you setup device

s3axel said:
Congrats, great to hear it worked out nicely for you ! May I ask which the latest CN version was ? Was ist 12.0.13 or 12.5.2 ?
Click to expand...
Click to collapse
the version i was on was 12.0.13

kuba319 said:
thats great new bro! After unlock bootloader did you turned on ur phone and did you do any steps? I mean can you guide me step-by-step what to do after unlock via miunlock, thanks!
Click to expand...
Click to collapse
once you unlock bootloader it will wipe all data and auto reboot, once it loaded up i turned off device and got into fastboot, then follow steps i listed. Profit!

rambo8987 said:
once you unlock bootloader it will wipe all data and auto reboot, once it loaded up i turned off device and got into fastboot, then follow steps i listed. Profit!
Click to expand...
Click to collapse
you dont have to go again to dev mode and turn on debbuging?

rambo8987 said:
worked right out the gate eu roms have google service running soon as you setup device
Click to expand...
Click to collapse
I thought with unlocked BL it wont pass safetynet check for gpay and banking apps or did you relock the BL

kuba319 said:
you dont have to go again to dev mode and turn on debbuging?
Click to expand...
Click to collapse
no after reboot after unlocking bootloader since its unlocked it remains unlocked so no need to mess with debug

sc954rr said:
I thought with unlocked BL it wont pass safetynet check for gpay and banking apps or did you relock the BL
Click to expand...
Click to collapse
i was surprised too, but i just ordered starbucks with gpay and it works flawless. not sure if unlocked BL it self triggers safetynet fail as there is no way far as i know to currentyl ROOT which i could see tripping it, but then there magisk which would solve that

rambo8987 said:
the version i was on was 12.0.13
Click to expand...
Click to collapse
Same, working fine now!

rambo8987 said:
i was surprised too, but i just ordered starbucks with gpay and it works flawless. not sure if unlocked BL it self triggers safetynet fail as there is no way far as i know to currentyl ROOT which i could see tripping it, but then there magisk which would solve that
Click to expand...
Click to collapse
All security checks passed for me and banking and payment stuff is working without issue!

rambo8987 said:
yes yoiu just need to enable it with a dailercode
yes you have to enable it via phone dialer
https://www.reddit.com/r/Xiaomi/comments/cjuax5
i have the china varient mi 11 ultra
Click to expand...
Click to collapse
This just worked for me on China 12.5.2 on AT&T for VoLTE/HD Calling

jmikepr said:
This just worked for me on China 12.5.2 on AT&T for VoLTE/HD Calling
Click to expand...
Click to collapse
It also enabled the toggled for WiFi Calling on AT&T as well. Which I then turned on and selected to prefer mobile data as I don't really care about WiFI Calling.