Related
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Unlock and flash recovery
Backup
Format Data! (It's important if you come from Miui)
Install Q Firmware + vendor
Install LineageOS followed by gapps
Reboot into system and setup device.
Reboot into recovery and flash magisk
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
I also dont know if its possible to get recovery and rom on android 10 versions.
Thanks
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Flash a custom recovery
Create a backup
Root???
Install LineageOS
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
Thanks
Click to expand...
Click to collapse
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
You could also check LOS thread: Here and here
Remember:
Chinese firmware: Widevine L3 and NFC support
Indian firmware: Widevine L1 but no NFC support
ishaqtkr said:
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
They may work as it but I was just wondering if anyone could go into more detail or if there was a better approach and from what Kollachi said there clearly is a better way that what I said.
Since I'm in stock ROM and haven't ever flashed AOSP ROM in this phone I'll just back off lol
Sent from my Redmi K20 Pro using Tapatalk
Kollachi said:
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
Click to expand...
Click to collapse
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Any of the two recoveries will work. Q firmware means Android Q. Wile data/cache dalvik that's it. Regarding firmware, there's a clear topic of Lineage OS in K20 Pro forum which is still in unofficially state
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
1. You can take what you want. Orangefox is based on TWRP.
2. Format data is needed if you come from miui. If you did it you are good to go. But it wouldn't be false to wipe system, dalvic, cache
3.https://downloads.akhilnarang.me/MIUI/raphael/ --> Take 10.4.6.0 or 10.4.8.0 (Android 10 = Q)
4. No there is no specific version.
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
I would recommend the latest TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
https://forum.xda-developers.com/k20-pro/development/rom-lineageos-17-0-t3976469/post80406191
Robbo.5000 said:
I would recommend the latest TWRP from here
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
Click to expand...
Click to collapse
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Kollachi said:
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Click to expand...
Click to collapse
Yes flashing the whole fastboot ROM does add the risk, if you forget to change the flash option, but you are guaranteed a clean slate and so less likely to have any niggling issues that nobody else has. I would bet large sums of money that many of the issues you see on here, where only one person has some problem and everyone else is fine, would be solved by fastboot flashing MIUI before installing the ROM of choice.
If you know what you're doing and know when you'll be OK with what you've got and know when it's best to start clean, then going with the vendor and firmware is easier.
But if your unsure and new to flashing on Android phones, I will always suggest go with the overkill and know you've got the clean slate to start with.
---------- Post added at 10:56 AM ---------- Previous post was at 10:36 AM ----------
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
Click to expand...
Click to collapse
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
You connect your phone to computer while in recovery to transfer the OS zip
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
After format data, reboot your device into recovery again and transfer LOS, gapps and all files you need.
Format data kills the storage.
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes I did that and it worked, unmounting and remounting helps detect the storage in PC
Sent from my Redmi K20 Pro using Tapatalk
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes that works. Tried it myself but prefer to reboot into recovery again.:laugh:
Finally Successful
After a long post I have finally finished the process successfully. This was pretty educational for me since I didn't understand any of this at the start I would like to thank everyone who reply's and all the information that you have provided.
need help guys, i stuck in bootloop.
- fastboot rom global china V10.3.17.0 PFKCNXM
- fastboot twrp 3.3.1
- format data
- flash vendor image cn 10.4.6.0
- wipe cache/dalvik
- flash lineage os
- flash gapps nano
- reboot
- stuck bootloop
TL;DR - Tried to downgrade Android 10 Xiaomi EU to Android 9 Xiaomi EU, tried wiping the device (besides storage). I can get into TWRP and Fastboot, just won't boot OS.
Detailed:
I was running the latest Android 10 Xiaomi EU Stable Rom MIUI 11 (11.0.2) and wanted to downgrade because I had a few issues.
I reinstalled the last stable Android 10 Xiaomi EU Stable Rom for MIUI 10 (10.3.17) and it ran fine. I then realized that I wanted to be back on Android 9....
I went and tried to install Android 9 Xiaomi EU Stable Rom for MIUI 10 (10.3.16) and then ran into boot looping.
So then I got into TWRP and erased all data and then tried to copy over the old update file and realized I can't copy over anything even with MTP Enabled.
All the folders in the sdcard are random letters and numbers..
So now I can't send any files over and im stuck wondering how to fix this problem and then go over to Pixel Experience.
Send help! Please!
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
thiagodark said:
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
Click to expand...
Click to collapse
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
originalwill23 said:
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
Click to expand...
Click to collapse
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
thiagodark said:
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
Click to expand...
Click to collapse
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Robbo.5000 said:
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Click to expand...
Click to collapse
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Doing that is just making sure its a clean flash and not a dirty one?
originalwill23 said:
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Click to expand...
Click to collapse
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Robbo.5000 said:
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Click to expand...
Click to collapse
I successfully got everything up and running in PE and im loving it. Thanks!!
Hey everyone - long time lurker/researcher, but generally good at searching for answers without bugging anyone. This one has me stumped.
I have a Mi 9 CN model (6/128) that has been unable to make phone calls with the main mic without having to toggle Speakerphone on/off
I've tried 3 different custom roms (Xiaomi.eu, Pixel Experience, Evolution), and the Global MIUI 11 rom, but nothing seems to help fix it.
I have the newest version of TWRP installed right now (3.3.1-46), I have tried with and without Magisk installed....right now I don't even have TWRP installed at all on the Global rom.
Same happens for my SO's Mi 9 too as well.
Is there something I'm missing? I've tried turning off WiFi Calling/OK Google detection/VoLTE, rebooted, cleared cache/ cleared data inbetween new ROM installs....
Hardware test shows Main and Top as PASS.
Any tips would be appreciated! I feel like I've tried everything possible.
Thanks in advance~
AZ_Miss_Murder said:
Hey everyone - long time lurker/researcher, but generally good at searching for answers without bugging anyone. This one has me stumped.
I have a Mi 9 CN model (6/128) that has been unable to make phone calls with the main mic without having to toggle Speakerphone on/off
I've tried 3 different custom roms (Xiaomi.eu, Pixel Experience, Evolution), and the Global MIUI 11 rom, but nothing seems to help fix it.
I have the newest version of TWRP installed right now (3.3.1-46), I have tried with and without Magisk installed....right now I don't even have TWRP installed at all on the Global rom.
Same happens for my SO's Mi 9 too as well.
Is there something I'm missing? I've tried turning off WiFi Calling/OK Google detection/VoLTE, rebooted, cleared cache/ cleared data inbetween new ROM installs....
Hardware test shows Main and Top as PASS.
Any tips would be appreciated! I feel like I've tried everything possible.
Thanks in advance~
Click to expand...
Click to collapse
Your TWRP is right.
Try to flash syberia with recommended vendor exactly step by step and of course really clean install with formatted data yes.
If this isn't working I'll think you've got to flash via pc the stock and then again a custom ROM.
Laptapper said:
Your TWRP is right.
Try to flash syberia with recommended vendor exactly step by step and of course really clean install with formatted data yes.
If this isn't working I'll think you've got to flash via pc the stock and then again a custom ROM.
Click to expand...
Click to collapse
I'm actually going to follow the Evolution instructions (just missed the part about flashing EEA)
So i'm using MiFlash with the MIUI11 EEA boot rom file, then I'll do the normal TWRP -> format data -> install Evolution ROM and test.
Thanks!
So it seems like I'm completely out of luck at this point - I've tried basically everything I can think of, and I think something big must be wrong with the phone's file system.
I've followed Evolution's steps to a T (minus MiFlash having an error at the end of the EEA flashing, but the firmware seeming to load fine) and still run into the no Mic issue.
"Flash MIUI11 eea with miflash
Flash vbmeta.img with "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification" (Download here)
Flash TWRP
Wipe (dont wipe system/vendor)
Format data
Reboot recovery
Flash rom
Reboot system"
Wipe (don't wipe system/vendor) I assume means just a normal factory reset wipe via TWRP, which I've tried.
I've tried both fw+vendor files (the newest for Android 10 and newest from Xiaomi.eu)
Any other last suggestions before I assumed the phone is broken?
Try to flash xiaomi.eu_multi_MI9_9.11.7_v11-10.zip
With miflash and after factory reset.
https://sourceforge.net/projects/xi...iaomi.eu_multi_MI9_9.11.7_v11-10.zip/download
SO! Update here
I was able to use Evolution X's Android 9 instructions to get everything working fine....but everytime I try to duplicate that for MIUI 11 it does not work.
Reboot to recovery
- Flash the latest 9.8.1 vendor image or full stock ROM.
- Reboot to twrp and format data
- Wipe cache/dalvik
- Reboot back to recovery and flash
I tested using the newest Xiaomi.EU Vendor for Android 10 and the stock one with no luck....more thoughts?
Did you try turning off the VoLTE?
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Astrek said:
Okay. Am currently on MIUI 11.0.3 (the latest one available for RaphaelIN)
So, the problem am facing is that, when i flash a custom rom, my phone gets rebooted to recovery and sometimes to fastboot(this happens occasionally) and i just simply cant get the rom to load.
Sometimes my phone gets into a state which resembles hardbrick (none of the buttons work, even holding the power button for 10secs doesn't) and after sometimes, usually 15 to 20 mins it restarts itself. This has happened thrice till date and all while booting to system.
The Roms i have tried-
-Pixel experience (unofficial) (android Q)
- Lineage OS 17 (unofficial)
- Havoc OS (both official and unofficial) (both pie and Q versions)
-MIUI (European rom)
I have also tried flashing the chinese, indian and global vendor (all done separately) thinking it was a vendor issue, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking was done through the official method and the official app.
Any solutions for this problem and has anyone faced these problems or is it only me?
Click to expand...
Click to collapse
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Thnx for the guide. i will do this within a day or two and update you if it worked or not.
Kollachi said:
You didn't format data that's why your rom doesn't boot. Follow Robbos nice guide and you are good to go.:good:
Click to expand...
Click to collapse
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Astrek said:
I did format the data partition coz that's one thing I and my friends always do when flashing new rom. I don't exactly remember but i think, the pseudo hardbrick thingy started after i formatted the system, data, cache & internal storage.
I will follow Robbos guide adn keep you guys updated on what happened.
Click to expand...
Click to collapse
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
Ohhh *****...!!!! It ****ing worked!!!! Though i made some mistakes like clean all and lock in first step, but was able to unlock bootloader almost instantly, no idea why but i can almost instantly unlock certain mi phone's bootloader instantly. But a lot of thanx for taking your time and writing this up... You really saved me from being stuck in MIUI forever!
A lot of thnx.... and also happy new year... 1st day of 2020 went quite well for me all thnx to you and i hope yours goes well too.!
Robbo.5000 said:
Consider this an overkill solution that always works for me if I run into issues with other methods. It will wipe everything so backup your data and apps.
Download the latest fastboot Indian MIUI ROM (for anyone else reading this download the ROM that is the same region as your phone)
Fully extract the ROM and flash it - make sure, if you use the Mi Flash Tool, that you change the flash option to 'clean all'
Boot into MIUI once, you don't need to actually go through the set-up, just let it fully load.
Boot the phone into fastboot and install TWRP - I recommend the latest mauronofrio TWRP.
After installing TWRP boot immediately into TWRP.
Format the data partition - don't skip this step.
Wipe cache and dakvik - don't wipe anything else.
In TWRP goto the mount menu and unmount the data partition then mount it again - others would suggested rebooting back into TWRP, either way works, you just need to make sure the data partition is properly mounted after formatting it.
Install the ROM of your choice - either have the ROM on a USB OTG stick, or copy it onto the phone from a PC whilst still in TWRP.
If your ROM doesn't include Google apps and services and you want Google, then install GApps - at the time of writing this Android 10 GApps is still in beta and packages bigger than nano may cause issues, so stick with pico or nano, assuming your installing an Android 10 ROM.
Boot into the ROM.
If you want Magisk, once the ROM has loaded, boot back into TWRP and flash the latest Magisk installer - it is possible to flash Magisk without booting into the ROM first and you'll probably be OK, but occasionally it can cause problems, I can't remember the details, but for the sake of 30 seconds I now boot into the ROM before flashing, just to be on the safe side.
At the time of writing this people have recently reported issues flashing GApps immediately after flashing Havoc 3.0 and recommend booting Havoc before flashing GApps. Although others say they've not had any problems. So if you choose to install Havoc you 'might' have problems if you install GApps without booting into Havoc at least once first.
I've never had problems when following this method.
Click to expand...
Click to collapse
thanks for help
but no work for me
after flash rom and reboot booting to twrp auto..
Kollachi said:
Format data = (you will need to type in "yes")
Note: Format data or wipe data isn't the same thing.
Click to expand...
Click to collapse
many times the tiniest msg has the greatest significance. thanks mate!!!
Guys i need your help,, i flashed my phones custom Rom tecno 7cs using sp flashing tool.
That worked and it showed the tick icon on my pc.
The problem is that it does nothing to my phone because the software issues are still there
my phone keeps restarting itself almost all the time and sometimes won't even boot it takes longer to boot,,, apps keep on crushing and many more.AM tired am going to break it and throw it if i don't get solutions asap!
So the flashing process only wiped data on the phone nothing else whatsoever.
tecno 7cs p121 Bi safaricom ke 20151111
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
dev-DaT said:
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
Click to expand...
Click to collapse
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Robbo.5000 said:
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Click to expand...
Click to collapse
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... now iam stuck again on fastboot screen because i wiped + formatted everything.
Edit:
When i want to flash recovery it says "OKAY" but it is unable to boot:
Sending 'recovery' (65536 KB) OKAY [ 1.562s]
Writing 'recovery' OKAY [ 0.333s]
Finished. Total time: 1.989s
Sending 'boot.img' (65536 KB) OKAY [ 1.547s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
dev-DaT said:
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... If i wipe all data trough TWRP and then reboot, i don't have OS but i do reboot back into TWRP, because well, there is nothing else...
Click to expand...
Click to collapse
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Robbo.5000 said:
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Click to expand...
Click to collapse
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
dev-DaT said:
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
Click to expand...
Click to collapse
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Robbo.5000 said:
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Click to expand...
Click to collapse
Ok thanks a lot! So no need to wipe system partition after stock rom install. just wipe cache/dalvik/data, got it.
Most ROM install guides tell you to wipe /system when coming from stock rom. I guess this requirement has changed? or depends on what ROM you're coming from?
Use can use my guide
https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
it has how to flash roms, and fastboot fix. (which tells why the Recovery isn't staying)
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
I need help... The reason why I'm flashing custom rom is, when the latest update came MIUI 12.5 android 11, all sensors of my phone stopped working like (Gyroscope, accelerometer, proximity sensor) I tied to flash the rom by fastboot method but still the problem persists. because of that I unlocked bootloader and flashed twrp. After flashing custom rom when I tried to boot it, it stuck on booting screen and when I tried to reboot into recovey it is showing fastboot mode. I'm unable to boot into custom rom.
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
Bro I have one doubt, I installed pixel os successfully then I roll back into stock os(miui) with locking bootloader, the. Again I unlock bootloader successfully, but the problem is I am unable to install os, i tried wipe data, catch. But the stock rom was not removed. What can I do?
Using orange fox in resmi note 10 pro