Database Develop

[guide] steps to flash gsi on redmi note 7

[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this

shouldn't you be flashing disable_encrypt zip too?

repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside

PROdelision said:
shouldn't you be flashing disable_encrypt zip too?
Click to expand...
Click to collapse
No, its not required.
chiplovez9x said:
repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside
Click to expand...
Click to collapse
Make sure you have allowed modifications on system partition and also you dont have system as read only.

Does fingerprint working on GSI?

what is gsi?

I don't know much but gsi means u can flash almost all roms (which have images). And most of ROMs do have gsi images.. So u can install any rom on your phone. I don't know the steps to do so.. ?

bryanngapopala said:
what is gsi?
Click to expand...
Click to collapse
Simple speaking it's a image with clear android from google

Has anyone tested RR PIE GSI on RN7? Does it work?

Is it possible to boot Android O GSI? :silly:

letsmakecakes said:
No, its not required.
Click to expand...
Click to collapse
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.

Is the. Method the same for the global version with global rom?

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Which GSI should be needed to take? A-only or A/B ?

PROdelision said:
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.
Click to expand...
Click to collapse
I have no experience with GSI images, but I know in general that PIE breaks the encryption, if you roll back the security patch level. I don't know it this happened in your case, but I have lost couple of times my encrypted storage when I have tried to restore a backup of rom with older android patch level. After that, the bootup encryption pin is no longer accepted, neither by android nor by twrp, so the only option is to format data to remove encryption and start from scratch.
Were your miui beta and rr gsi of the same android security patch level?

Getting WRONG PIN error after setting up pin ???

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Hi!
Did you not disable dm-verity and force-encryption?
Another question, the dev MIUI roms contain both the system and vendor partitions, right? How do you install only the vendor partitions from them? Or do you just flash MIUI and then reflash the custom ROM system? In that case, won't that affect dm-verity and encryption on the data partition?

Flashing correctly a GSI like in this guide; with vendor ecc ecc, will gcam work? Actually i'm on stock MIUI 10 and obv all working fine with a perfect version. My doubt is it.

Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?

any recommended gsi rom with no bug?

booladi said:
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Did you not erase your /data partition through TWRP?
Click to expand...
Click to collapse
I did wipe userdata but not internal storage. heard its because i have unencrpyed data partition?

Magisk Bootloop on MIUI 11 11.0.1.0 Global Version

Hi friends, every time I try to root the 11.0.1.0 Global, my phone end up in Bootloop (goes to TWRP every time). I tried to flash disable dm verity, but same results.
I'm using TWRP unnoficial (twrp-3.3.1-25-raphael-mauronofrio.img) but tried with the official too, same results.
This time I will try to flash Magisk v18, or older.
I'm using Mi 9T Pro Global Rom.

Clear Cache and Dalvik cache in TWRP

XblackdemonX said:
Clear Cache and Dalvik cache in TWRP
Click to expand...
Click to collapse
Okay, now I'm unrooted, what steps I need to do? TWRP >> Flash Magisk >> Flash DM Verity >> Wipe Cache/Dalvik? Or only Flash Magisk via TWRP and Wipe Caches?
Edit: same results, tried to flash magisk and clear cache and dalvik, bootloop again.
Edit²: tried to do a Factory Reset on TWRP and system booted up normally, Magisk Manager says that I'm rooted, but I can't install any module. Tested AdAway do get root, and all ok.
Edit³: Magisk Manager requested for some "additional files", I pressed to install and he rebooted the phone, now I'm stuck again in TWRP. Tried to clear Cache and Dalvik cache, same results.

RobertPirainoBR said:
Hi friends, every time I try to root the 11.0.1.0 Global, my phone end up in Bootloop (goes to TWRP every time). I tried to flash disable dm verity, but same results.
I'm using TWRP unnoficial (twrp-3.3.1-25-raphael-mauronofrio.img) but tried with the official too, same results.
This time I will try to flash Magisk v18, or older.
I'm using Mi 9T Pro Global Rom.
Click to expand...
Click to collapse
install magisk 19.3
Video install
https://drive.google.com/file/d/16vDfZDWBgtY8_ECB8aRWNed_6mqctY5T/view
 @redmiK20ProIndonesia

RobertPirainoBR said:
Hi friends, every time I try to root the 11.0.1.0 Global, my phone end up in Bootloop (goes to TWRP every time). I tried to flash disable dm verity, but same results.
I'm using TWRP unnoficial (twrp-3.3.1-25-raphael-mauronofrio.img) but tried with the official too, same results.
This time I will try to flash Magisk v18, or older.
I'm using Mi 9T Pro Global Rom.
Click to expand...
Click to collapse
To install magisk on the global version, you must first remove the encryption.
1. return the system to its original state so that it boots, most likely it is flash via MiFlash (or via twrp ROM version for twrp)
2. flash DFE-script, reboot from twrp in twrp ( https://drive.google.com/open?id=1mFVdDlnp32g2AjdKlMq6tZcqK0krP-js )
3. format data-yes, reboot in system
4. check in the settings that encryption is disabled
5. flashing magisk in twrp

kancutluh said:
install magisk 19.3
Video install
https://drive.google.com/file/d/16vDfZDWBgtY8_ECB8aRWNed_6mqctY5T/view
@redmiK20ProIndonesia
Click to expand...
Click to collapse
alex9yust said:
To install magisk on the global version, you must first remove the encryption.
1. return the system to its original state so that it boots, most likely it is flash via MiFlash (or via twrp ROM version for twrp)
2. flash DFE-script, reboot from twrp in twrp ( https://drive.google.com/open?id=1mFVdDlnp32g2AjdKlMq6tZcqK0krP-js )
3. format data-yes, reboot in system
4. check in the settings that encryption is disabled
5. flashing magisk in twrp
Click to expand...
Click to collapse
I will try this now. I can do this with dirty flash? I'm able to boot system, with Magisk v20.1 installed and partially working (if I install the additional content in Magisk Manager will Bootloop again, and I can't install modules).

RobertPirainoBR said:
I will try this now. I can do this with dirty flash? I'm able to boot system, with Magisk v20.1 installed and partially working (if I install the additional content in Magisk Manager will Bootloop again, and I can't install modules).
Click to expand...
Click to collapse
You can flash the magisk-uninstaller 20.1.
and after format data-yes all your data will be gone.

Go to /data/adb/magisk/chromeos find "futility" file. Permission 644 for it.
Go to /data/adb/magisk find "BusyBox" file and permission 664 for it.
Reboot and done.
In future, when you flash any rom on k20 pro. Remember that do it if you flash magisk.
Good luck!
(Solution from 4pda)

shinigami_tsin said:
Go to /data/adb/magisk/chromeos find "futility" file. Permission 644 for it.
Go to /data/adb/magisk find "BusyBox" file and permission 664 for it.
Reboot and done.
In future, when you flash any rom on k20 pro. Remember that do it if you flash magisk.
Good luck!
(Solution from 4pda)
Click to expand...
Click to collapse
Wow this seems to have worked!

shinigami_tsin said:
Go to /data/adb/magisk/chromeos find "futility" file. Permission 644 for it.
Go to /data/adb/magisk find "BusyBox" file and permission 664 for it.
Reboot and done.
In future, when you flash any rom on k20 pro. Remember that do it if you flash magisk.
Good luck!
(Solution from 4pda)
Click to expand...
Click to collapse
This is great. I downloaded magiskhide and had to enable it through terminal then it showed up in the drop down browser for magisk but wasnt in modules list of magisk. None of the modules seem to download and go there. Is it supposed to be like that?

Vanmanman said:
This is great. I downloaded magiskhide and had to enable it through terminal then it showed up in the drop down browser for magisk but wasnt in modules list of magisk. None of the modules seem to download and go there. Is it supposed to be like that?
Click to expand...
Click to collapse
Same here, trying to install modules but don't show up on modules tab.

RobertPirainoBR said:
Same here, trying to install modules but don't show up on modules tab.
Click to expand...
Click to collapse
Yeap!
1. Flash magisk via twrp (suggest pitchblack)
2. Delete 2 files
3. Reboot (→solved bootloop)
4. Open magisk manager and update (if failed, close app and try again and agian) → after auto reboot (after 5 seconds), can solved issue "can not flash modules - of course with all modules flashed, it's showed in list).

RobertPirainoBR said:
Same here, trying to install modules but don't show up on modules tab.
Click to expand...
Click to collapse
Solution is here https://forum.xda-developers.com/mi-9t/help/phone-stuck-bootloop-try-to-install-t4007259
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/and...crypt-t3817389

Vanmanman said:
Solution is here https://forum.xda-developers.com/mi-9t/help/phone-stuck-bootloop-try-to-install-t4007259
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/and...crypt-t3817389
Click to expand...
Click to collapse
doesn't work, tried and stuck on boot loop

Vanmanman said:
Solution is here https://forum.xda-developers.com/mi-9t/help/phone-stuck-bootloop-try-to-install-t4007259
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/and...crypt-t3817389
Click to expand...
Click to collapse
I tried in many ways but did not succeed

Khaledms said:
I tried in many ways but did not succeed
Click to expand...
Click to collapse
Not sure sorry. I ended up waiting for a better version of Magisk to come out. Have you tried Magisk 20.3 on K20/mi96t android 10 miui 11?

Hi guys,
Try to format data in TWRP before the first reboot. Remember, this will clear your data.
It is very easy to get bootloop because of cryptography.
Good luck!

REALME X2 PRO (CN version) bricked... TWRP backup.

Hi , guys.
I have bricked my real x2 pro (CN version).
I tryed to restore several ways (MSMDOWNLOAD, QPST, QFiL) , but none of them leaded me success.
The frail possibility is It still works in TWRP mode.
So maybe it is impudent favor to ask you,
Can someone give me the clean backup of its system etc. of TWRP ?
It seems to me the final way to resolve this problem.:crying:

You try this, install twrp-3.3.1-12-RMX1931-mauronofrio.img , flash official ozip file with this version twrp, then fastboot official recovery.img, clear data under official recovery. this work for me. but I lost modemst1 modemst2 fsg persist partition( bakcup and restore with Chinese version twrp 3.3.1-1107 zwsx), and brick my x2 pro too.

Thank you, friend !
The official .ozip is chinese version ?
I could'nt find one than for RMX1931EX.
I already tried to flash it from TWRP.
But it is for RMX1931EX not for RMX1931 (installer showed me just 1931, no EX nor CN), so I could'nt.

yox2580 said:
Thank you, friend !
The official .ozip is chinese version ?
I could'nt find one than for RMX1931EX.
I already tried to flash it from TWRP.
But it is for RMX1931EX not for RMX1931 (installer showed me just 1931, no EX nor CN), so I could'nt.
Click to expand...
Click to collapse
the official ozip for RMX1931CN chinese version is this:
https://www.realme.com/support/software-update
direct link is:
https://download.c.realme.com/osupdate/RMX1931_11_OTA_0130_all_3jeZN7pIEWts_local.ozip

yox2580 said:
Thank you, friend !
The official .ozip is chinese version ?
I could'nt find one than for RMX1931EX.
I already tried to flash it from TWRP.
But it is for RMX1931EX not for RMX1931 (installer showed me just 1931, no EX nor CN), so I could'nt.
Click to expand...
Click to collapse
Flash the ozip
Rename system root to system
Flash the cn fw via fastboot enjoy
Sent from my RMX1931 using Tapatalk

I tried to flash CN rom from TWRP.
Not successed.
flash the ozip
failed saying ,For RMX1931CN not for RMX1931.
TWRP version is twrp-3.3.1-12-RMX1931-mauronofrio.
I'm sure my phone is CN version.
I just want clean backup file of system by TWRP...

Try changing file system in advanced wipe from ext 4 > ext 2 then back to ext 4 before flashing CN ozip.

chino1234 said:
Try changing file system in advanced wipe from ext 4 > ext 2 then back to ext 4 before flashing CN ozip.
Click to expand...
Click to collapse
thx ,
Now I tried .
'sysyem_root' and 'vendor' files
advanced wipe format ext4 →ext2 →ext4
then flash ozip.
Same resulted...
Didn't I do correctly ?

https://fixerrorcode.com/status-error-7-in-twrp-recovery/
maybe this will help you out.

Hi,
Now I dont know how to overwrite recovery image from PC.
The phone doesnt be accessed in debugging mode.
Just external memory of PC.
And my phone wakes only in TWRP.
So for flashing, I send files from PC to twrp folder of my phone.
This is why I begged for the backup of system by TWRP.

Dude if you would follow my unbrick guide your phone would work
---------- Post added at 03:39 AM ---------- Previous post was at 03:36 AM ----------
Fix
natedogg20050 said:
I Went totally nuts last night when i bricked my phone so i did figure out my self how to unblock the phone.
First you need to BE ABLE TO ENTER FASTBOOT it won't work without it and you need working TWRP.
First you need to go to TWRP and go to mount and unmount everything and disable MTP.
Then go to Advanced and select Terminal
type in LS make sure there is 2 Folders one called system and one called system_root
make sure that the system folder is empty if empty type in rm -r system
and rename the system_root folder to system using mv system_root system
after that boot into Fastboot mode and Flash your Rom for your Device using the Fastboot Tool
Hope that works for you guys.
Click to expand...
Click to collapse

I have resored my phone after install the official .ozip file with OTG, and everything went back. then I tried follow:
install magsick 20.3, reboot, worked.
install opengapps, brick too.

springwind said:
I have resored my phone after install the official CN versiom .ozip file with OTG, and everything went back. then I tried follow:
install magsick 20.3, reboot, worked.
install opengapps, brick too.
Click to expand...
Click to collapse
BTW, I install the official ozip file with offcial recovery.

[Treble Project] How to download and install Treble Project for J7 Prime

Steps to install Treble ROMs on Galaxy J7 Prime.
Prerequisite:
1. Flash TWRP recovery. For Treble Project I suggest version 3.2.1 here because there is an issue about mounting /preload partition with 3.2.3+. You can try newer versions for your choices. If you see /preload error, Some suggested to ignore this error.
2. For emergency, please download Stock ROM here. If you accidentally mess up your partitions or consistently bricks, Stock ROM will reset everything back to start.
Needed Files:
1. Files from Project Spaget X here.
Exynos7870_CreateVendor.zip is to create /vendor partition.
Exynos7870_ProjectSpaget_V3.0.zip is to install necessary for Treble Project.
Exynos7870_RevertVendor.zip is to delete /vendor partition, in case of uninstalling Treble Project.
2. Treble ROM with ARM64 A only here. My favorite Treble ROMs are Lineage, Arrow and Havoc. I am currently using Arrow.
3. ARM64 GAPPS here.
4. Kraken Kernal here or here. Please download for Treble only. RC12 is universal.
5. Magisk here.
Step I Flash Treble project:
1. boot TWRP recovery
2. wipe Data, Cache, Dalvik, System
3. flash Exynos7870_CreateVendor.zip and reboot to recovery
4. flash Exynos7870_ProjectSpaget_V3.0.zip
Step II Flash Treble ROM:
1. flash Treble ROM ARM64 A only, no need to reboot to recovery in order to install the ROM.
Edit: Reboot to Recovery > Install > press Install Image > choose your Rom.img
2. After flashing the ROM, I usually reboot to system in order to test whether or not the flashed ROM can boot nicely.
2.1 If the flashed ROM cannot boot or brick or bootloop in Logo, press Home + Power + Vol Down to force reboot to Bootloader and boot to recovery.
2.2 Back to recovery. wipe Data, Cache, Dalvik, System
2.3 flash Exynos7870_ProjectSpaget_V3.0.zip before flashing new Treble ROM.
Step III Flash ARM64 GAPPS:
1. Choose Wipe > Advanced Wipe > choose System > Repair > Resize. Sometimes you need to do this twice in order to resize since the first time will show error.
2. flash GAPPS
Step IV Flash Kraken Kernal:
1. Mount > System and Vendor partitions
2. flash KRAKEN-Kernel-RC12-universal7870-Treble-20200314.zip (The latest version of Kraken)
3. reboot to system
I usually reboot once to system before flashing Magisk.
Step V Flash Magisk:
1. Mount > System and Vendor partitions
2. flash Magisk to root
3. reboot to system
4. run Play Store and set up your account
5. run Magisk Manager. When you press Tap to start SafetyNet check, you will find out that ctsProfile: false.
Please note that Usually it will be installed when you have GAPPS installed. If not, you can install Magisk Manager manually.
6. choose Downloads > search "SafetyPatch by hackintosh" > download and install > reboot This will fix ctsProfile false to be true.
Now you are done the basice steps to flash Treble ROMs for your J7 Prime. Any questions please leave a message under the thread.
Cheers, :highfive::highfive::highfive:

Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
Click to expand...
Click to collapse
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help

dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
Click to expand...
Click to collapse
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.

siamese007 said:
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
Click to expand...
Click to collapse
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much

dctviphb2 said:
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
Click to expand...
Click to collapse
You're welcome. I honestly never experience this kind of error.
I found a solution about this error on youtube.
This solution is to extract ROM file and edit updater-script file with notepad++.
Edit: try this Spaget X file. I followed this youtube tutorial trying to fix error 7 that you got when flashing Spaget X.
Another possibility of this error is Partition messed up.
I would try to flash stock ROM with Odin to reset everything to factory default.
Caution: Back up your data before flashing Stock ROM.
Follow the instruction of how to flash Stock ROM in the Stock ROM page or here. Flashing Stock ROM will also remove TWRP recovery and re-partition.
Hope one of this solution help, :highfive::highfive::highfive:

Thank you so much. I think the problem is I am using HROM, which has Repatition.zip, so I think that my partition has messed up, that the reason I face the issue. I will try to solve it with your idea. Thanks so much for helping me, if I can solve the problem I will tell you

Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much

dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
That's great NEWS. You've managed to find a solution for No OS installed error.
By the way, for the deep sleep problem that you mentioned, I also experience the same thing. My solution is to press home button to immediately wake the phone up from deep sleep.

[HELP]Treble Incompatible device (J7 PRIME)
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone

hussain_mdj said:
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
Click to expand...
Click to collapse
Unpack .xz file

TWRP still doesn't detect the image
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
...
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
i'm dummy dum so forgive and thenk

dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
There is a solution...in phh treble settings go to doze then turn on out of pocket feature....works like a charm for me.....
------------
HAPPY TO HELP..

Question Block device required error

I have Redmi Note 10 Pro I watched trough the internet but nothing helped if you know how to fix please help.

download the stock rom for your phone copy sd card or xiaomi.eu rom V14.0.1.0..TKFMIXM
[ROM][MIUI][sweet] Xiaomi.eu ROM for Redmi Note 10 Pro
How to install Xiaomi.eu ROM for Redmi Note 10 Pro We will release fastboot ROM versions until TWRP for sweet is released TWRP is released, so install our ROM as usually Steps to install xiaomi.eu ROM for first time from China ROM (All your...
forum.xda-developers.com
TWRP
1. Advanced wipe> Cache, Data,
Format Data - yes
2. Flash rom
3. Format Data - yes
4.Reboot system

Sorry i t doesnt work it wright updater process ended with ERROR: 1 and all previous errors

Yes ... You must in twrp What twrp do you have? https://forum.xda-developers.com/t/...dmi-note-10-pro.4248353/page-14#post-87788963
1. Advanced wipe> Cache, Data,
Format Data - yes
2. Flash rom - stock rom
3. Format Data - yes
4. Reboot system

Ashle said:
Yes ... You must in twrp
1. Advanced wipe> Cache, Data,
Format Data - yes
2. Flash rom - stock rom
3. Format Data - yes
4. Reboot system
Click to expand...
Click to collapse
The same errors it doesnt work for me

What twrp do you have? https://forum.xda-developers.com/t/...dmi-note-10-pro.4248353/page-14#post-87788963
if the error persists, just flash the rom

Ashle said:
What twrp do you have? https://forum.xda-developers.com/t/...dmi-note-10-pro.4248353/page-14#post-87788963
Click to expand...
Click to collapse
3.7.0_12-0

1.try the flash rom...
2. Advanced wipe> Cache, Data,
Format Data - yes

Ashle said:
1.try the flash rom...
2. Advanced wipe> Cache, Data,
Format Data - yes
Click to expand...
Click to collapse
every time flash rom failed

Download fastboot rom https://xiaomifirmwareupdater.com/miui/sweet/
you can also do this https://forum.xda-developers.com/t/...dmi-note-10-pro.4248353/page-12#post-86808617 ..
Fastboot version - Unzip in PC
Connect the phone ( power + volume down ) to the computer - Fastboot mode
And run windows_fastboot_first_install_with_data_format.bat

Ashle said:
Download fastboot rom https://xiaomifirmwareupdater.com/miui/sweet/
you can also do this https://forum.xda-developers.com/t/...dmi-note-10-pro.4248353/page-12#post-86808617 ..
Fastboot version - Unzip in PC
Connect the phone ( power + volume down ) to the computer - Fastboot mode
And run windows_fastboot_first_install_with_data_format.bat
Click to expand...
Click to collapse
Thank you so mutch now everething is fine