Database Develop

[MIUI9] Latest stable recovery & fastboot ROMs for Redmi 6A (cactus)

Hi all, as you know miui download page is down now. So, here are the latest ROMs for Redmi 6A
Latest stable recovery ROM
http://bigota.d.miui.com/V9.6.3.0.OCBCNFD/miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip
Latest stable fastboot ROM
http://bigota.d.miui.com/V9.6.3.0.O...CBCNFD_20180602.0000.00_8.1_cn_8908f50f02.tgz

Twrp out?

Looking for twrp myself.

Grahaman27 said:
Looking for twrp myself.
Click to expand...
Click to collapse
redmi 6a twrp by jemmini
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser

some bs there. it doesnt work. neither is it mentioned anywhere in the twrp official site.

atvator said:
redmi 6a twrp by jemmini
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser
Click to expand...
Click to collapse
this twrp not active , tested on miui 9.6.3 9.6.5 and 9.6.6

empty.cad said:
this twrp not active , tested on miui 9.6.3 9.6.5 and 9.6.6
Click to expand...
Click to collapse
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.

atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
I also can not find it anywhere
---------- Post added at 05:11 PM ---------- Previous post was at 04:36 PM ----------
This is global but recovery rom
http://bigota.d.miui.com/V9.6.2.0.OCBMIFD/miui_CACTUSGlobal_V9.6.2.0.OCBMIFD_a9380c9697_8.1.zip

root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/

Grahaman27 said:
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
Click to expand...
Click to collapse
This doesn't work

o it doesn't. Twrp leads to data partition being encrypted. Whenever WIPE data partition to decrypt, all files are deleted. When reboot into fresh system, copy files again, and reboot into reflashed twrp, data partition is enrolled encrypted again. And no MTP so it's an endless loop.
---------- Post added at 06:21 PM ---------- Previous post was at 06:18 PM ----------
atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
o it doesn't. Twrp leads to data partition being encrypted. Whenever WIPE data partition to decrypt, all files are deleted. When reboot into fresh system, copy files again, and reboot into reflashed twrp, data partition is enrolled encrypted again. And no MTP so it's an endless loop.
Sd card? What sdcard

Sd card? What sdcard
Sd card =external Sd card

hi just want to ask if i had a redmi 6a china stable unlocked bootloader can i just use miflashtool to flash global stable rom?
http://bigota.d.miui.com/V9.6.11.0....FD_20180726.0000.00_8.1_global_f6cf0f4231.tgz
here is the global stable fastboot rom cant seem to find anyone tried yet

gsc_hd2 said:
This doesn't work
Click to expand...
Click to collapse
I guess mine is the only one it works for then.

redmi 6a global v 9.6.3 version
atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
same problem

geogetski666 said:
hi just want to ask if i had a redmi 6a china stable unlocked bootloader can i just use miflashtool to flash global stable rom?
http://bigota.d.miui.com/V9.6.11.0....FD_20180726.0000.00_8.1_global_f6cf0f4231.tgz
here is the global stable fastboot rom cant seem to find anyone tried yet
Click to expand...
Click to collapse
I also want to know ?

sushmoyhossain said:
I also want to know ?
Click to expand...
Click to collapse
I think you can, if you have unlock bootloader

[guide] steps to flash gsi on redmi note 7

[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this

shouldn't you be flashing disable_encrypt zip too?

repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside

PROdelision said:
shouldn't you be flashing disable_encrypt zip too?
Click to expand...
Click to collapse
No, its not required.
chiplovez9x said:
repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside
Click to expand...
Click to collapse
Make sure you have allowed modifications on system partition and also you dont have system as read only.

Does fingerprint working on GSI?

what is gsi?

I don't know much but gsi means u can flash almost all roms (which have images). And most of ROMs do have gsi images.. So u can install any rom on your phone. I don't know the steps to do so.. ?

bryanngapopala said:
what is gsi?
Click to expand...
Click to collapse
Simple speaking it's a image with clear android from google

Has anyone tested RR PIE GSI on RN7? Does it work?

Is it possible to boot Android O GSI? :silly:

letsmakecakes said:
No, its not required.
Click to expand...
Click to collapse
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.

Is the. Method the same for the global version with global rom?

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Which GSI should be needed to take? A-only or A/B ?

PROdelision said:
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.
Click to expand...
Click to collapse
I have no experience with GSI images, but I know in general that PIE breaks the encryption, if you roll back the security patch level. I don't know it this happened in your case, but I have lost couple of times my encrypted storage when I have tried to restore a backup of rom with older android patch level. After that, the bootup encryption pin is no longer accepted, neither by android nor by twrp, so the only option is to format data to remove encryption and start from scratch.
Were your miui beta and rr gsi of the same android security patch level?

Getting WRONG PIN error after setting up pin ???

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Hi!
Did you not disable dm-verity and force-encryption?
Another question, the dev MIUI roms contain both the system and vendor partitions, right? How do you install only the vendor partitions from them? Or do you just flash MIUI and then reflash the custom ROM system? In that case, won't that affect dm-verity and encryption on the data partition?

Flashing correctly a GSI like in this guide; with vendor ecc ecc, will gcam work? Actually i'm on stock MIUI 10 and obv all working fine with a perfect version. My doubt is it.

Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?

any recommended gsi rom with no bug?

booladi said:
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Did you not erase your /data partition through TWRP?
Click to expand...
Click to collapse
I did wipe userdata but not internal storage. heard its because i have unencrpyed data partition?

/system corrupted

Hello, last night I have unlocked the bootloader flashed twrp -0 official build and magisk it was all good and was working then i wanted to install the last eu beta and flashed but flashing it always corrupting the file system, to solve it I have flashed stock rom via fastboot
Problem here I do not wipe /system directory but whenever I try to flash a custom rom the file system directory is corrupting and consequently the device is stucking on twrp. Is there an idea?

MertFatih said:
Hello, last night I have unlocked the bootloader flashed twrp -0 official build and magisk it was all good and was working then i wanted to install the last eu beta and flashed but flashing it always corrupting the file system, to solve it I have flashed stock rom via fastboot
Problem here I do not wipe /system directory but whenever I try to flash a custom rom the file system directory is corrupting and consequently the device is stucking on twrp. Is there an idea?
Click to expand...
Click to collapse
1. It must to be in QUESTIONS & ANSWERS and not in GUIDES, NEWS, & DISCUSSION.
2. What exactly corrupted? There is system partition which is not file system And there is a data partition which you can call a file system
3. If the problem was in system partition you would be stuck in fastboot.
4. What steps did you make after flashing stock rom via fastboot?
For flashing eu beta ROM after flashing stock rom via fastboot, the steps are:
1. FORMAT (not wipe) data.
2.Wipe cache/dalvik cache (don't wipe system or flash a ROM without reboot).
3.Flash eu ROM.
You can try another TWRP for example: https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825 , official TWRP is based on it or from Chines team: http://files.mi-room.ru/files/twrp/cepheus/3.3.1-1030/recovery.img . Both very good.

g_seva said:
1. It must to be in QUESTIONS & ANSWERS and not in GUIDES, NEWS, & DISCUSSION.
2. What exactly corrupted? There is system partition which is not file system And there is a data partition which you can call a file system
3. If the problem was in system partition you would be stuck in fastboot.
4. What steps did you make after flashing stock rom via fastboot?
For flashing eu beta ROM after flashing stock rom via fastboot, the steps are:
1. FORMAT (not wipe) data.
2.Wipe cache/dalvik cache (don't wipe system or flash a ROM without reboot).
3.Flash eu ROM.
You can try another TWRP for example: https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825 , official TWRP is based on it or from Chines team: http://files.mi-room.ru/files/twrp/cepheus/3.3.1-1030/recovery.img . Both very good.
Click to expand...
Click to collapse
Update: after format, it stucks on twrp(directories are not encrypted), and rom is not flashing at all I mean it is not writing to /sdcard (loading screen says it successfully flashed but not in the reality )and there are only 'obb' and 'TWRP' directories in the /sdcard also the twrp version is not even change by fastboot or flashing img after a reboot it recovers itself to build -0
I will try it with the Chinese teams's twrp build for this time
Solved with another twrp version

Error installing rom via mi flash / error when updating phone to android 10 global st

I would like a help, so I'm trying to install the rom via mi flash, but not installing the rom, it's in 500sec and nothing to complete the installation, luckily I was able to install via TWRP, however when I try to update via Android OTA 10 I get stuck in the bootloop.

need more info.
You installed Twrp I assume over the stock rom?
if so boot into TWRP and format user data. ( note this wipe completely erase the phone. but you have no choice it must be done. if you have files that you want on the phone, see you can access them via Windows explorer and copy them over to your desktop.
Basic Instructions
FORMAT /data partition (Important Never Ever Wipe System Or Persist!)
Copy our ROM to the internal storage or use external USB drive ( must choose which device to install from in twrp)
Install ROM, and anything else depending on rom if needed such as gapps
Reboot to recovery
Reboot to system and setup

tsongming said:
need more info.
You installed Twrp I assume over the stock rom?
if so boot into TWRP and format user data. ( note this wipe completely erase the phone. but you have no choice it must be done. if you have files that you want on the phone, see you can access them via Windows explorer and copy them over to your desktop.
Basic Instructions
FORMAT /data partition (Important Never Ever Wipe System Or Persist!)
Copy our ROM to the internal storage or use external USB drive ( must choose which device to install from in twrp)
Install ROM, and anything else depending on rom if needed such as gapps
Reboot to recovery
Reboot to system and setup
Click to expand...
Click to collapse
Now I managed to install the rom with Android 10 global, but the region is only in China, I can't change it and this one without facial unlocking.

NikolasG. said:
Now I managed to install the rom with Android 10 global, but the region is only in China, I can't change it and this one without facial unlocking.
Click to expand...
Click to collapse
I believe that @Agimax has a flashable mod on his stable page for changing regions, that seems to be a bug with the latest stable version.
Check here, and maybe tried pinging Agimax, if you need assistance.
https://forum.xda-developers.com/mi-8/themes/mods-miui-global-beta-region-free-t3898459/page5
Another option is flashing the latest Xiaomi.EU, which has every available feature some of which have not yet found their way to the stable build.
For the download links check Option 2
https://forum.xda-developers.com/mi-8/how-to/miui-11-xiaomi-eu-rom-released-t3974643

[Treble Project] How to download and install Treble Project for J7 Prime

Steps to install Treble ROMs on Galaxy J7 Prime.
Prerequisite:
1. Flash TWRP recovery. For Treble Project I suggest version 3.2.1 here because there is an issue about mounting /preload partition with 3.2.3+. You can try newer versions for your choices. If you see /preload error, Some suggested to ignore this error.
2. For emergency, please download Stock ROM here. If you accidentally mess up your partitions or consistently bricks, Stock ROM will reset everything back to start.
Needed Files:
1. Files from Project Spaget X here.
Exynos7870_CreateVendor.zip is to create /vendor partition.
Exynos7870_ProjectSpaget_V3.0.zip is to install necessary for Treble Project.
Exynos7870_RevertVendor.zip is to delete /vendor partition, in case of uninstalling Treble Project.
2. Treble ROM with ARM64 A only here. My favorite Treble ROMs are Lineage, Arrow and Havoc. I am currently using Arrow.
3. ARM64 GAPPS here.
4. Kraken Kernal here or here. Please download for Treble only. RC12 is universal.
5. Magisk here.
Step I Flash Treble project:
1. boot TWRP recovery
2. wipe Data, Cache, Dalvik, System
3. flash Exynos7870_CreateVendor.zip and reboot to recovery
4. flash Exynos7870_ProjectSpaget_V3.0.zip
Step II Flash Treble ROM:
1. flash Treble ROM ARM64 A only, no need to reboot to recovery in order to install the ROM.
Edit: Reboot to Recovery > Install > press Install Image > choose your Rom.img
2. After flashing the ROM, I usually reboot to system in order to test whether or not the flashed ROM can boot nicely.
2.1 If the flashed ROM cannot boot or brick or bootloop in Logo, press Home + Power + Vol Down to force reboot to Bootloader and boot to recovery.
2.2 Back to recovery. wipe Data, Cache, Dalvik, System
2.3 flash Exynos7870_ProjectSpaget_V3.0.zip before flashing new Treble ROM.
Step III Flash ARM64 GAPPS:
1. Choose Wipe > Advanced Wipe > choose System > Repair > Resize. Sometimes you need to do this twice in order to resize since the first time will show error.
2. flash GAPPS
Step IV Flash Kraken Kernal:
1. Mount > System and Vendor partitions
2. flash KRAKEN-Kernel-RC12-universal7870-Treble-20200314.zip (The latest version of Kraken)
3. reboot to system
I usually reboot once to system before flashing Magisk.
Step V Flash Magisk:
1. Mount > System and Vendor partitions
2. flash Magisk to root
3. reboot to system
4. run Play Store and set up your account
5. run Magisk Manager. When you press Tap to start SafetyNet check, you will find out that ctsProfile: false.
Please note that Usually it will be installed when you have GAPPS installed. If not, you can install Magisk Manager manually.
6. choose Downloads > search "SafetyPatch by hackintosh" > download and install > reboot This will fix ctsProfile false to be true.
Now you are done the basice steps to flash Treble ROMs for your J7 Prime. Any questions please leave a message under the thread.
Cheers, :highfive::highfive::highfive:

Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
Click to expand...
Click to collapse
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help

dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
Click to expand...
Click to collapse
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.

siamese007 said:
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
Click to expand...
Click to collapse
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much

dctviphb2 said:
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
Click to expand...
Click to collapse
You're welcome. I honestly never experience this kind of error.
I found a solution about this error on youtube.
This solution is to extract ROM file and edit updater-script file with notepad++.
Edit: try this Spaget X file. I followed this youtube tutorial trying to fix error 7 that you got when flashing Spaget X.
Another possibility of this error is Partition messed up.
I would try to flash stock ROM with Odin to reset everything to factory default.
Caution: Back up your data before flashing Stock ROM.
Follow the instruction of how to flash Stock ROM in the Stock ROM page or here. Flashing Stock ROM will also remove TWRP recovery and re-partition.
Hope one of this solution help, :highfive::highfive::highfive:

Thank you so much. I think the problem is I am using HROM, which has Repatition.zip, so I think that my partition has messed up, that the reason I face the issue. I will try to solve it with your idea. Thanks so much for helping me, if I can solve the problem I will tell you

Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much

dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
That's great NEWS. You've managed to find a solution for No OS installed error.
By the way, for the deep sleep problem that you mentioned, I also experience the same thing. My solution is to press home button to immediately wake the phone up from deep sleep.

[HELP]Treble Incompatible device (J7 PRIME)
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone

hussain_mdj said:
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
Click to expand...
Click to collapse
Unpack .xz file

TWRP still doesn't detect the image
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
...
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
i'm dummy dum so forgive and thenk

dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
There is a solution...in phh treble settings go to doze then turn on out of pocket feature....works like a charm for me.....
------------
HAPPY TO HELP..