Is there anyway to force LTE band change between bands 13 and 4? At home, I have one bar on band 4, but get 60 dl, and 30 up. However, on band 13 I'll get full bars and get 30 dl, 15 up. I don't use my data at home as I am always on wifi, so this cell standby battery drain is murder. If I reset my data connection it will connect to band 13 initially, but it will then change to band 4. Switching my carrier is not an option as T-Mobile, Sprint, and AT&T get equally crap reception and I'm still under contract with Verizon which ends in October. Maybe then I might think about switching to project fi.
I've seen other threads on disabling certain bands, but those bands are only used by T-Mobile and Sprint, so they are of no use to me. Any ideas?
There is a thread about 4G/LTE.
http://forum.xda-developers.com/showthread.php?p=55635555/
Further search the play store for 4g switching apps.
NLBeev said:
There is a thread about 4G/LTE.
http://forum.xda-developers.com/showthread.php?p=55635555/
Further search the play store for 4g switching apps.
Click to expand...
Click to collapse
I've seen that thread but it doesn't say anything about removing or blocking certain bands. As for the 4g switcher apps they only have he ability to change LTE modes via CDMA or GSM
The last idea, in case you use a Nexus 6.
There is thread with flashable radio's.
Maybe you can find an older radio that doesn't have the bands you don't want.
http://forum.xda-developers.com/showthread.php?p=59728002/
NLBeev said:
The last idea, in case you use a Nexus 6.
There is thread with flashable radio's.
Maybe you can find an older radio that doesn't have the bands you don't want.
http://forum.xda-developers.com/showthread.php?p=59728002/
Click to expand...
Click to collapse
Yeah, i tried flashing the oldest radio listed and it's still a no go, band 4 still seems to be enabled. :/
aroy97 said:
Yeah, i tried flashing the oldest radio listed and it's still a no go, band 4 still seems to be enabled. :/
Click to expand...
Click to collapse
No more ideas; think it is not possible to disable band 4, without hacking/patching the radio image.
NLBeev said:
No more ideas; think it is not possible to disable band 4, without hacking/patching the radio image.
Click to expand...
Click to collapse
For now I have my connection as 2g whenever I'm on wifi so that should fix the cell standby for now.
aroy97 said:
For now I have my connection as 2g whenever I'm on wifi so that should fix the cell standby for now.
Click to expand...
Click to collapse
I have the same because here in the Netherlands we have the so called 4G. But when I am home (inside) there is bad connection. Phone calls are disconnected frequently.
With 2G very good reception at home.
On the road I switch to 4G when I need internet.
I use an app to quickly switch 2G-4G.
It's a rather old app of CurveFish and is in the play store - 2G 3G -
I have exact same problem but problem of speed.
There are 3 lte bands 850mhz,1800mhz and 2300 mhz.
2300 mhz has highest speed which i want my redmi note 3 to run on only but in my home it only switches between 850 mhz and 1800 mhz.
Searched a lot but not able to find any guide which allows to lock the frequency to 2300 mhz band only. The signal bar is also 3-4 on 2300 mhz still it connects to 850 and 1800 mhz most of the time unless i am in open area outside house then it switches to 2300mhz band.
Use QXDM
aroy97 said:
Is there anyway to force LTE band change between bands 13 and 4? At home, I have one bar on band 4, but get 60 dl, and 30 up. However, on band 13 I'll get full bars and get 30 dl, 15 up. I don't use my data at home as I am always on wifi, so this cell standby battery drain is murder. If I reset my data connection it will connect to band 13 initially, but it will then change to band 4. Switching my carrier is not an option as T-Mobile, Sprint, and AT&T get equally crap reception and I'm still under contract with Verizon which ends in October. Maybe then I might think about switching to project fi.
I've seen other threads on disabling certain bands, but those bands are only used by T-Mobile and Sprint, so they are of no use to me. Any ideas?
Click to expand...
Click to collapse
Hi - not sure if this is still a topic of interest, but you can use QXDM software to achieve this - you just need to change NV line 6828 to be "4096" decimal value. On the Nexus 6, this is a fairly easy process as you just need to boot to bootloader and select "BP Tools" as your boot-up option and then the phone will be in diagnostic mode to connect to a PC. There's info out there on XDA with more detail, but as long as you can successfully install the Motorola/Qualcomm drivers you can fairly easily restrict LTE bands to whatever combination you'd like.
Be aware - some say this is a risky operation but I've not found that to be the case. But there is a chance of messing up your device if you're not careful.
Take a look at the "NV Calculator" app in the Play Store for additional info on determining decimal values for the LTE bands (you might want to keep band 2, for instance, as Verizon uses that sometimes as well).
Here's more info on this on XDA:
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Good luck!
I changed by accident a radio band to usa band (by phoneinfo). How to return to European version. I tried to upload different roms but no effects. I saw a post about le max 2 but not mine. Any ideas?
Dial *#*#4636#*#* Select Phone Information and select radio band from 3 dot option button on top right.
In this way I broke phone. There was only one band - USA. In others ROMs also I had only one choice - USA band, even stock ROM. Thanks to this post https://forum.xda-developers.com/le-max-2/how-to/guide-unlock-bands-leeco-le-max-2-fix-t3439154 phone log on to the network. 5 minutes ago I made the first conversation. But I don't now about stability. I chose the frequency according to the attached screen in that post. In LE2max there is another processor (820 not 652). The changes appear now 3 options - USA Band/ JAPAN Band/ Band mode 6.
Would anyone be able to install DFS Studio and make a two screens with original frequencies (read for RF BC Config and read Bands Preffered)?
Hi, is it possible for me to change (and stay that way) the LTE bands on my phone without root? My network seems very slow on band 5 LTE and I'm looking to change it to band 38 or 40 instead. Thanks
Base on my experience, it's impossible not to root your phone and change system files.
I already have both bands on, it's just the matter of preferring one band over the other. I tried manually to search networks in the advance tab and managed to connect manually for a minute to band 40 network before it automatically changes back to band 5 ( even i selected thr the network manually)
Hey guys,
xda still going strong. nice to see.
need some help though.
i bought a note 8(yes in 2020) for some reason(side device) and i got stuck with a problem right away.
i noticed that TDD LTE bands(band 34,38,39,40,41) are all missing from my device.
i am having an exynos varient (n950f)
i was monitoring my network from past 2 days and 3ca was working fine. i was connected to 3,5 and band 40 all together.
i wanted better reception so went in network selection mode and selected band 5 preffered. i dialed *#0011# to check my ca status and i was still transmitting on all 3 bands with speeds well over 100mbps.
after some time my speeds died and i no longer see band 40 in *#0011# menu and i have tried restarting device and what not but still cant connect to band 40.
i am pretty sure TDD LTE bands including band 40 was missing from band selection menu earlier too but things were just fine. not i am stuck with a expensive device that fails badly.
please help.
on some inspection i observed that my phones is continously doing 2ca even when using no major data on band 3 and 5.
basic is stuck on band 3 and s1 on band 5. me changing to whatever setting in band selection in hiddennetworksetting dont affect it.
tried selecting bands that my operator dont even support. not in preffered mode but as the only hard selection. makes no diffrence. network signals shuts for a second and i am back on band 3 and 5 combo
Good day . Just want to ask help how can I manually select band(s) in samsung a71? It has only auto detection of bands and default carrier aggregate.
What I want is manual selection of bands and locking 3 bands because I assume samsung A71 is capable of 3cc or 3 band carrier aggregation.
Thank you and more power. Hoping to hear from you soon.
Here is listed of supported Carrier Aggregation combinations:
US-model: https://cacombos.com/device?model=SM-A716U
EU-model: https://cacombos.com/device?model=SM-A715F
US-model doesn't support Carrier Aggregation with B3.
May work
beloybilly said:
Good day . Just want to ask help how can I manually select band(s) in samsung a71? It has only auto detection of bands and default carrier aggregate.
What I want is manual selection of bands and locking 3 bands because I assume samsung A71 is capable of 3cc or 3 band carrier aggregation.
Thank you and more power. Hoping to hear from you soon.
Click to expand...
Click to collapse
This may work for band selection, install Activity Launcher by Adam Szalkowski, search for hiddennetworksetting, found under Calls, long press to create shortcut or just select it to launch it. Once lauched, select the menu, select Band Selection, select the bands you want then toggle on the Selection toggle.