Okay I have these three issues with my phone...
1. Bluetooth: Sometimes when I enable bluetooth and connect it to my headset and try and play something no sound comes through and then the phone becomes redicuasly laggy. To fix this I power down the phone, then when I try to power it back up there is no response from the phone. After pulling and reinserting the battery the phone manages to boot and then connects to bluetooth headset & works fine. This has happened multiple times.
2. 3 Button: I know a lot of people have this but my phone has no recovery mode by the 3 button combo. I see there is a sort of firmware fix that people aren't sure is the real deal yet
3. Battery Loose: When I shake my phone, tap my screen or hold it tight you can hear the battery blatantly rocking around. It feels so loose and makes the phone feel patheticly cheap, I've resorted to stuffing folded paper in there to make it feel at least a little bit solid.
Amounst these I also have a few GPS issues and lag issues which I'm not worried about as I see there is the upcoming Froyo rom and Voodoo lag fix which will fix there however on the issues above I'm considering trying to return my phone under warrarnty (which might prove difficult as its parralell importers I got it from ) what do you guys recon? Try to get a replacement or these issues common and not worth it?
Bluetooth: sounds like you have an A2DP capable headset and when it connects it's scanning your phone for medias to play and it's slow due not enough memory, due all the extra background process running that are not needed.
3 Button modes: the fixes on the Dev forum works install them if you dare, and want some protection, otherwise don't flash any ROM if you are not confortable with the idea
Batter Loose?! really? no way! WTF? how? there's no room in the compartment to move at all, are you sure it's not a used phone or a fake battery?
About the battery...
My SGS battery fit nicely & tightly in the compartment and won't easily drop out even shaking with the case removed.
Maybe should return & swap a new battery or the whole unit
edwinlinkt said:
Maybe should return & swap a new battery or the whole unit
Click to expand...
Click to collapse
yup! i agree, it sounds waaaaaaaay too fishy, probably some one messed up with that phone and re-sold it
i'll return the phone and demand a new one
I would also agree with returning it. Mine has no wobble or rocking around so i'd be inclined to think its faulty or fake.
Also we've heard how these type of battery's can explode so i wouldn't take any risks with a dodgy one.
Mine kind of shakes but I blame myself as I've taken the battery in and out alot to flash new roms and updates so I kind of bent the back cover a little. Thank god I didn't snap the back (yet). I also have a full leather case so the back cover issue isn't a problem at all
Hey guys i just bought a nook color and had it shipped to my country but i think i am already regretting it now.
The touch screen starts behaving very weird randomly at any times, it automatically registers touches and keyboard automatically typing own it own, and what ever i touch just goes straight to hell and this continues as long a i don't lock and unlock it again.
Even when i am reading it automatically starts zooming.
I was think about rooting it and installing a custom Rom, will that fix the problem? because giving it back to B&N is not an option for me.
Also i don't have screen guard, and the screen is always smudged with fingerprints, can that trigger this sort of behavior?
I'm using mine in Australia and have a similar problem but only when using the supplied USB cable to charge it.
I've heard stories about faulty USB cables which might be the case as I don't have this problem when I use the cable for my desire. The problem with this is that the cable isn't long enough for practical use and the supplied cable apparently has extra pins which would explain why it still discharges (although slower) when using my desire micro USB cable.
For now I'm limited to only using my nook without the cable plugged in but I'm thinking about finding another cable as sending it back to B&N and then paying to ship it back here isn't really a viable option.
Let me know if you figure something out though.
Well the one with usb cable is a known issue and u can still use it otherwise, mine just happens randomly at any time, its almost unusable.
Does installing a custom rom help?
It wouldn't hurt to try. I know some kernals make changes to the touchscreen sensitivity but I don't know whether that would apply to your problem or not. A nook is very easy to un-root anyways so as far as I know (and don't quote me on this), you should be able to return it if you absolutely have to.
Don't give up though. I'm loving mine and for the price it's an awesome little accessory when it works.
Hi,
Make sure to clean the touch screen - last night I had a different looking
smudge on my screen that was causing huge problems - as soon as I cleaned
it off, back to normal. Are you in a humid location? Condensation will cause
problems too.
Also you may want to search for 'calibrate' in the forums, there is a way to
recalibrate the touchscreen sensitivity, I believe that this is mostly for
low sensitivity at the corners though.
Here are two links I found:
http://forum.xda-developers.com/showthread.php?t=943358&highlight=calibrate
http://forum.xda-developers.com/showthread.php?t=934500
Good luck!
Peter
My touch screen acts up as well. I turn the screen off for a couple minutes to "reset" it. It will work OK for a little, then it goes back to wonky.
Hey guys i finally found a solution to this problem, well my touch screen is behaving normally when its not not connected to the power cable. I hope thats a solution good enough for you.
Just go to
h**p://nookdevs.com/Recalibrate_the_NookColor_touch_screen
I tried all the custom roms but that didn't help very much, so i tried this on CM7
and so far my screen is giving totally normal tests results when not plugged in and lets hope that it stays that way.
My daughter had a similar wonky-screen problem when she plugged in a particular set of portable music player speakers. Not another pair she has, just that one.
And I was able to replicate it on my nook. It wasn't specific to her nook.
okay, it seems that my excitement didn't last that long but
After a lot of testing, it turned out that the only problems was my oily or moist fingers.
so i got a screen guard and tested it for more than two hours and i haven't had any problems yet. So even if i do see that happening again, once in two hours is not that bad.
rigy73 said:
okay, it seems that my excitement didn't last that long but
After a lot of testing, it turned out that the only problems was my oily or moist fingers.
so i got a screen guard and tested it for more than two hours and i haven't had any problems yet. So even if i do see that happening again, once in two hours is not that bad.
Click to expand...
Click to collapse
I think I'll try this cause I have oily fingers as well and I'm getting the wonky screen issue while NOT plugged in as well.
rigy73 said:
Hey guys i finally found a solution to this problem, well my touch screen is behaving normally when its not not connected to the power cable. I hope thats a solution good enough for you.
Just go to
h**p://nookdevs.com/Recalibrate_the_NookColor_touch_screen
I tried all the custom roms but that didn't help very much, so i tried this on CM7
and so far my screen is giving totally normal tests results when not plugged in and lets hope that it stays that way.
Click to expand...
Click to collapse
I'd add my vote to this link...worked for me:
http://nookdevs.com/Recalibrate_the_NookColor_touch_screen
Assumes you have ADB working via USB or wireless
NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.
That didn't work for me, I had no option but to replace the touchscreen/gorila glass.
I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted
AirLancer said:
I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted
Click to expand...
Click to collapse
I have to admit, I cared litte whether or not this actually worked. I just wanted to toast it But it did work, so
Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?
Lesiroth said:
Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?
Click to expand...
Click to collapse
If it DOES indeed work on hot days, then it means the phone is not entirely dead. But I would suggest you do something less drastic first, such as the Glove Compartment method. No responsibility though
If you're trying to remove moisture, you could also try putting it in a baggie of crystaline cat litter (NOT the clay kind!) - this stuff is sold at a MUCH higher price as a way to save a phone from water damage, but it's the exact same substance. Does a great job removing moisture. It's the same sort of silica gel that's in those packets in medicine/vitamins that says "Dessicant - do not eat".
Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk
CybeRNerO said:
Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Pretty sure that rice doesn't do anything, I don't know how that started as a suggestion, but its not better than anything else; its not known to be absorbant, but the silicon is.
I've tried the method but the right segment of the digitizer still doesn't work.
My biggest issue with regards to "lack of responsiveness" are the 4 capacitive buttons. Pressing the Home key is always hit and miss. I know I hit it all the time because I can feel the vibration feedback but it only goes to homescreen 50% of the time.
Will also be testing this out as soon as I have the spare time. My screen started acting up after I accidentally put my milestone in a small beer spill at a party Hopefully this will work out for me too!
Abazel said:
I've tried the method but the right segment of the digitizer still doesn't work.
Click to expand...
Click to collapse
Luckily for me, I was still under warranty, heh. Cause I had insurance. This is my second Droid this has happened to. Hopefully my replacement won't do the same thing.
How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.
decon89 said:
How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.
Click to expand...
Click to collapse
I feel I am on a cooking show
Well, depends on your over. Mainly I was trying to maintain a temp varying between 50-60 c. Mostly 50, but sometimes 60 to up the ante a bit and make sure things stay warm. 30 minutes at least. However, I have to say that I did this twice in 6 weeks, and after that the phone just died again, and I found my warranty card and sent it there to be fixed, and they fixed it, but ruined something else.
If you have the warranty card, take your phone and send it to them Someone told me the method worked and the phone has been good for quite a while, but most of us seem to re-experience the issue after a while.
I've been having these issues for a few days now too, and I think I know why. I've been using this Milestone for 4 months now, and I never had this problem until a few days ago. What I noticed yesterday was that after some acting up, the phone started working properly again. So I ran Touch Test. And I noticed that if I pressed really hard on the top side of the phone(where the logo and the ear piece are located) it started acting up again. My first impression was that the glue holding down the gorilla glass was loose. So I left the phone as usual on my night stand and then I tried the same thing with the pressing on the same area. Guess what? It didn't happen again. Now there seems to be no problem. So I tried to remember what happened yesterday before the screen started acting up, and I remember talking to my wife for a while when I was in my car. Yesterday was a pretty hot day and I was a little sweaty when I talked to her. Now since only that specific part with the earpiece was causing this issue(I tried pressing equally hard on other areas without any problem my guess is that the insulation between the earpiece and the touchscreen has been breached. Maybe because of all the sweat that went in there in time. You know the salt and acids in the swear are known to melt things, and poor quality glue is among them.
How to fix this? I do not know yet, but I do have a good idea that I'd like to share. I want to buy a screen protector foil, and put just a little band around the ear piece. That would probably lower my in-call volume, but since the Milestone is very loud anyway I hope it the quality of the calls won't be too much affected. After that I'll use it in normal conditions again and see if the ghosting happens again.
try completely formatting your SD CARD/PARTITION.
& then reinstalling using (FAT 32/EXT 2, 3, or 4)
sometimes traces from the previous ROM might interfare with touch codecs (maybe)
just trying to help. had similar issue & this is what i did.
bandroid842 said:
NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.
Click to expand...
Click to collapse
Thank you for that Solution.
It fixed the Issue of my friends MS without other problems
I'll have to try and the oven methode again. My phone has started to really act up again.
I've tried to install new roms, wipe ect. and it doesn't help with the screen.
Have anyone tried to replace the digiziter? They are pretty cheap on ebay
My milestone started freaking out just an hour ago. No more warranty here but I'm not brave enough to do the oven method. Had anybody tried the Rice alternative?
Hello all, I just replaced a broken LCD and digitizer on my HD7 with a unit bought from eBay. It's from a supplier that I've used very frequently, so I trust the component. When I got the phone back together, it will sometimes boot, sometimes not. It will also sometimes display just fine, and other times it looks like it's garbled, or just not display at all. The screen will be blank and not react. I'm pretty versed at repairing phones, I've probably done 30 for myself and friends, so I'm pretty good at reassembly. Is anyone familiar with this issue and can maybe give me some ideas? Cause I'm flat out of them.
The other thing is that when I start moving the phone around after reassembly, this is when I start experiencing troubles. I tried putting electrical tape in places under the mobo to keep from grounding something out, but it doesn't seem to help. Any ideas would be great.
Did you put on gloves when you were doing the replacement. Cause like you I have done alot of screen replacements on a wide range of phones and I would have to say that there are devices out there were if something got grounded out while you are doing the replacement it tends to start doing all kinds of goofy things once the phone is back together. I have found that by wearing "gloves that do not conduct electricity" the chances of something like that happening is gone. Ive only had two devices do weird and strange things like some of what you have said. These were some of my first repairs and after changing to putting gloves on I haven't had a problem since.
Hope that helps and also I am about to replace the screen on a HD7 that I just bought just wanting for the screen so, I will let you know what happens.
Thanks, probably good advice. I've been very lax about using grounding protection of any kind. I've seen those guys who use the "finger condoms" where the rest of their hand is open. Couldn't hurt to use a grounding strap too, pretty cheap and easy precaution. The other thing I noticed about the phone was the SD that came with it isn't recognized by any OS, so wondering if there wasn't something else wrong with the phone.
As we all know, the phone is pretty darn well put together and surprisingly durable. But, unfortunately, it is not invincible. About a month and a half ago I cracked my screen. The phone had a case, but it wasn't anything hefty (the HTC Double Dip case). The phone was still completely usable, but I like the phone and wanted to keep it nice so I decided to replace the screen. I ordered the screen + framework assembly and it was about $55. In the past when I have replaced screens on a few iPhones and an ASUS tablet the parts were quite a bit cheaper, but whatever. My phone is the black model, but I decided to try something different and ordered the new part with red speaker grills. Most guides and such said that the M7 is a pretty hard phone to repair, but I have worked on a couple other phones before, so I gave it a go. After many, many hours of carefully prying apart the phone and transplanting the logic boards to the new screen framework I put it all back together and powered it up. To my surprise the phone powered up and the screen worked fine. (And let me tell you the red and black looks damn good). The first thing I noticed was that vibration didn't work. A bit annoying, but the phone looked good enough that I could get past that. Next I tested the speakers and noticed that at full volume the speakers sound a little bit messed up. Again, a little annoying, but I'm not a professional so I wasn't overly disappointed. Then came the real problem...
THE REAL PROBLEM:
When I put the SIM card in the phone didn't detect it. After a reboot it still didn't detect it. After a factory restore it still didn't detect it. Perhaps the ribbon cable connecting the SIM reader to the board was not all the way secured? After how hard it was to take the phone apart the first time I was not a fan of the idea of doing it again. But alas, the next day I opened the phone back up super carefully so not to damage the new parts. It was thankfully a little bit easier the second time. I made sure the SIM reader was all the way connected, but the phone still wouldn't read the SIM. I pulled the old SIM reader out from the old screen framework assembly and plugged it into the board, but the SIM was still not detected, indicating that the new screen did not come with a bad SIM reader. Has this problem happened to anyone else? What steps should I take? I now have really nice looking M7 that is essentially useless.
So does anyone have input on this?
Pr.TOSHIBA said:
So does anyone have input on this?
Click to expand...
Click to collapse
Same thing happened to me. Also swapped out the old reader without any luck.... Any update on this?
Does it detect it at all? Like ask for the pin code if you use that?
Do you have to disconnect the battery when replacing the screen on this phone? I know on some phones I repaired I had to manually set the current time and date (resets to year 1970 or something like that if you disconnect the battery) to get a signal.
Otherwise I have no idea