Database Develop

Can't Boot Into System, Only TWRP

Here's the whole story:
I was on an unofficial build of RR CM13, encrypted, using TWRP 3.0.2-1.
I wiped data, dalvik, cache, and flashed the newest Official RR 7.1.1 and open-gapps.
I boot into the new ROM and start setting stuff up.
I restore some apps' data using Titanium Backup, then reboot.
On reboot I'm greeted with the device setup screen
I reboot, wipe, reflash a bunch of times
A few times:
When I rebooted after using the system my PIN doesn't decrypt the system/data (booting into the system)
When I rebooted after using TWRP my PIN does decrypt (booting into the system)
At some point during this I try wiping everything from TWRP, but it freezes, goes black, and then the notification LED turns white. I hold the power button and boot back to TWRP.
Apparently wiping /data is the problem (everything else wipes just fine if I do them individually)
I boot back into the system, set it up, and do a full factory reset from there (after offloading my stuff from Internal Storage)
Back to TWRP, now no matter what I flash or restore, I don't end up booting into the system, only into TWRP
I've also tried TWRP 3.0.4-0 (which wouldn't decrypt my data), and I've reflash TWRP a few times.
How do I actually boot into my system? It's been 7 hours, and I'm losing my mind.

Deleted

Boot to your ROM through the power button...
Manually..

Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Do what he said. You've already wiped your internal storage, so just start from scratch.

Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?

RustySpackleford said:
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
Click to expand...
Click to collapse
flash twrp
adb push os zip
adb push su
flash all , if needed format data.
This is what I have done yesterday,
edit: If u brick I don't take any responsibility.

Deleted

TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .

uttam.ace said:
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
Click to expand...
Click to collapse
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:

bluuquthug said:
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
Click to expand...
Click to collapse
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306

uttam.ace said:
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?

bluuquthug said:
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
Click to expand...
Click to collapse
Your TWRP is working right!
go to TWRP/ Advanced/ADB Sideload
type "adb sideload /path/to/rom.zip"

Mate, recommend using ADB Sideload on TWRP itself is the only viable option you have. OR if that doesn't work and you still have the PIN issues, you should definitely use the Unbrick Tool and get everything back to Stock, and then reflash everything
Note: Using the unbrick tool will cause it to relock bootloader, so you're gonna have to start over again.
Cheers!

{ONE THREAD}Oneplus 3/3T OXYGEN OS 4.1.0 Stable 7.1.1 Installation/Changelogs (video)

This is an update of stable oxygen os 4.1 based on 7.1.1
Here are some highlights:
Upgraded Android 7.1.1
Updated Google security patch to 1st March 2017
Added expanded screenshots
Improved picture taking of moving objects with blur reduction
Improved video stability when recording
Improved WiFi connectivity
Improved bluetooth connectivity
General bug fixes
Downloads:
OP3T:
https://mega.nz/#!nhsVyJQR!2kegOJbHAVh-CmcelNkoKicQ_Mq16dcYlbkyUOKOGtw
https://drive.google.com/file/d/0B0pr-ZA5b-1pYUZoTHZNSi0xYmM/view
OP3:
https://mega.nz/#!CUVmkICS!oOvhFwbF5icXQS60gpZNVqnpWe7UbMX9IttKtLNhwA4
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
thanks @Viren for link
Steps:
download the zip
factory reset
use twrp/official recovery or adb to install
U R DONE
Video:
https://youtu.be/E7QtX9ug1pM

Official OTA links
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:

Can I flashed this from beta 12 with TWRP?

What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?

i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???

Can someone extract the gallery and camera app in oos and post it. Thanks

Pritster5 said:
What steps should I follow to flash this ROM if I am coming from a custom ROM? I was on VertexOS with 4.0.3 firmware and using RENDER KERNEL. Do I just wipe system, data, and cache and then flash OOS and SuperSU?
Click to expand...
Click to collapse
Clean flash include system wipe

HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
Boot ur phone take complete backup than go to recovery n do wipe

evertking said:
Can I flashed this from beta 12 with TWRP?
Click to expand...
Click to collapse
Yes u cn do dirty flash

ashokmor007 said:
Boot ur phone take complete backup than go to recovery n do wipe
Click to expand...
Click to collapse
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.

HatRiGt said:
i cudnt even boot my phone. when i boot it shows , encryption unsuccessful screen.
Click to expand...
Click to collapse
Which twrp u r using?

Viren said:
Dear OP,
If you do not mind, please add these official OTA links that I extracted to the Opening Page. It will help those people who want to download from an official source.
From 4.0.3 > 4.1.0
http://otafsc.h2os.com/patch/amazon...A_041-047_patch_1703132116_199c3467b469b7.zip
Full install of 4.1.0
http://otafsc.h2os.com/patch/amazon...Oxygen_16_OTA_047_all_1703132116_f7372e67.zip
Enjoy, everyone :good:
Click to expand...
Click to collapse
Thanks man ill do that now

ashokmor007 said:
Which twrp u r using?
Click to expand...
Click to collapse
3.0.4-1

HatRiGt said:
i have flashed the full rom.zip on twrp . now when i boot into recovery, twrp is asking to enter password ?? what should i need to do ?? i guess phone is encrypted .. How can i get my files back ???
Click to expand...
Click to collapse
What version of TWRP that you are using? Mine is 3.0.4.1 and i have no issue on the encryption error. Try to flash the latest TWRP version to see if that can bypass the error message or not.

Google Drive link for OP3. anyone? Thank you.

I have also decrypted memory. How to upgrade to the new version without encrypting memory again (and loosing everything)?

HatRiGt said:
3.0.4-1
Click to expand...
Click to collapse
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..

null0seven said:
Reboot to bootloader & reflash recovery. And save youre stuff to laptop for safety..
Click to expand...
Click to collapse
Flashed stock recovery n also tried twrp recovery.. Nothing bypassed the encryption. Asked for password. Finally decided to wipe the internal storage.
Lost all my personal data n pics :crying:

Video installation guide? I may not want to have TWRP problems..

Just one simple question: Why are you all staying at 3.0.4-1, when official 3.1.0.0 is out, able to get the job done without any problem? Just asking.

[Q] Flashing custom ROM issue (mount system)

Hi everyone,
I've encountered a big problem on my zuk z2 pro :
I used the Cosme Rom for a while and I wanted to upgrade the ROM via Twrp. As advised I wiped the system, cache, data. But since then, I can't flash any ROM : I've got the error 7 and "failed to mount /system" every time I try.
I have already tried to reflash custom recoveries (twrp 3.2.1.0, 3.1, redwolf) and got the same issue every time
I also tried to flash by QFIL the zui 1.9 and 2.3 with the stock recovery, the unlocking bootloader again and then flash a custom recovery, but without success
If someone can help me, i would be very gratefull, i got this problem for about a month and my only way to keep the phone running is to use Zui...
Thanks !

Liugen said:
Hi everyone,
I've encountered a big problem on my zuk z2 pro :
I used the Cosme Rom for a while and I wanted to upgrade the ROM via Twrp. As advised I wiped the system, cache, data. But since then, I can't flash any ROM : I've got the error 7 and "failed to mount /system" every time I try.
I have already tried to reflash custom recoveries (twrp 3.2.1.0, 3.1, redwolf) and got the same issue every time
I also tried to flash by QFIL the zui 1.9 and 2.3 with the stock recovery, the unlocking bootloader again and then flash a custom recovery, but without success
If someone can help me, i would be very gratefull, i got this problem for about a month and my only way to keep the phone running is to use Zui...
Thanks !
Click to expand...
Click to collapse
Go to twrp / wipe / format data/ "yes" / enter . Watch out ! You lost your all data . Then restart to twrp again . By the way , you must have at least 2.5 firmware if you want to flash custom ROMs based on Android 7.1 and above .

mar.ur said:
Go to twrp / wipe / format data/ "yes" / enter . Watch out ! You lost your all data . Then restart to twrp again . By the way , you must have at least 2.5 firmware if you want to flash custom ROMs based on Android 7.1 and above .
Click to expand...
Click to collapse
Thanks for the answer,
I just did what you said but innfortunely nothing have changed, got the same problem. I am acutally running Zui 3.1.194 ST.
I forgot to mention that if I try to flash the Cosme rom and only this one,the flashing process is just stuck

Liugen said:
Thanks for the answer,
I just did what you said but innfortunely nothing have changed, got the same problem. I am acutally running Zui 3.1.194 ST.
I forgot to mention that if I try to flash the Cosme rom and only this one,the flashing process is just stuck
Click to expand...
Click to collapse
Could you give some error log ? Do you use official 3.2.1-0 twrp ?

mar.ur said:
Could you give some error log ? Do you use official 3.2.1-0 twrp ?
Click to expand...
Click to collapse
Yup
I use TWRP 3.2.1.0, the official one
here some screenshot
https://imgur.com/a/MncFK

Have you unchecked zip signature verification ?

mar.ur said:
Have you unchecked zip signature verification ?
Click to expand...
Click to collapse
Yes, it still uncheck

Liugen said:
Yes, it still uncheck
Click to expand...
Click to collapse
Mount system partition read-only as well ?
https://ibb.co/eNJLhx

mar.ur said:
Mount system partition read-only as well ?
https://ibb.co/eNJLhx
Click to expand...
Click to collapse
Oh thank you so much ! well it's not the problem that you askes but ifinally managed to flash something
I do not know why, i wiped the system ( advanced wipe > system > wipe), then format data, and check system (mount > system) and flash AEX and it worked
Thank you again for the help !

Twrp disappeared

after updating to xiaomi.eu 9.5.1 I lost Twrp and can no longer install. any suggestions thanks

Updating stock rom overwrites always recovery so far I know. Reflash TWRP again and you are fine.

baggino said:
after updating to xiaomi.eu 9.5.1 I lost Twrp and can no longer install. any suggestions thanks
Click to expand...
Click to collapse
What twrp are u using before?

derKoder said:
What twrp are u using before?
Click to expand...
Click to collapse
I tried them almost all, maybe the installation procedure is wrong

the procedure I follow is:
1-I install my stock with Miflash
2 - Developer Options
3- Usb debugging
4- fastboot flash etc ..
5- start Twrp - I see the encrypted files,
6- format date
7 - restoration.
* It's correct?
solved

Try using TWRP from LR.Team/wzsx150 which in guide, news discussion forum

Question Help wiith sending sparse 'super'

Hi i got this error after trying to install the latest eu rom I installed it through the download and i clicked windows fastboot update rom then it took me to twrp but i cant get out of twrp I tried installing the rom using twrp again but it gives me errors of the modules and such im in loss of what to do ive spent almost 6hrs trying to fix this..

Ritual224 said:
Hi i got this error after trying to install the latest eu rom I installed it through the download and i clicked windows fastboot update rom then it took me to twrp but i cant get out of twrp I tried installing the rom using twrp again but it gives me errors of the modules and such im in loss of what to do ive spent almost 6hrs trying to fix this..
Click to expand...
Click to collapse
Which rom?
Which TWRP?

xiaomi.eu_multi_XM12Pro_V14.0.22.12.26.DEV_v14-13-fastboot.zip
eu rom was trying to flash my cn phone to eu
im not sure about the twrp version it installed with the rom

Ritual224 said:
xiaomi.eu_multi_XM12Pro_V14.0.22.12.26.DEV_v14-13-fastboot.zip
eu rom was trying to flash my cn phone to eu
im not sure about the twrp version it installed with the rom
Click to expand...
Click to collapse
Here is the method, no TWRP.
Use First install.bat
https://forum.xda-developers.com/t/rom-miui-zeus-xiaomi-eu-rom-for-xiaomi-mi-12-pro.4400035/

NOSS8 said:
Here is the method, no TWRP.
Use First install.bat
https://forum.xda-developers.com/t/rom-miui-zeus-xiaomi-eu-rom-for-xiaomi-mi-12-pro.4400035/
Click to expand...
Click to collapse
yes i used that but im stuck on twrp and now I cant do anything about it, i try to wipe data and everything but it gives me errors

Ritual224 said:
yes i used that but im stuck on twrp and now I cant do anything about it, i try to wipe data and everything but it gives me errors
Click to expand...
Click to collapse
On which rom before.
Twrp
/wipe format data type yes, reboot TWRP(if error red lines,try again and restarting on the twrp each time).
then try again with the First install.bat file

NOSS8 said:
On which rom before.
Twrp
/wipe format data type yes, reboot TWRP(if error red lines,try again and restarting on the twrp each time).
then try again with the First install.bat file
Click to expand...
Click to collapse
thanks man i installed it over again then it was giving the option to wipe it now i got it working appreciate the help now if i want to update it i have to do the same process right?

FWIW, I have a utility for expanding sparse files.
Then you can flash them with any utility like a flat file.
Yeah, there are a zillion utilities that do that.
They are mostly named simg2img.

Ritual224 said:
thanks man i installed it over again then it was giving the option to wipe it now i got it working appreciate the help now if i want to update it i have to do the same process right?
Click to expand...
Click to collapse
Nope, the update is done with OTA(Zip.format) then the Twrp.
update the TWRP first.