Hi all,
I am trying to open the Phone Information settings using *# *#4636# *# * and it crashes.
First was running LineageOS 15.1 last version and I thought it was that, then I just changed to Nitrogen OS, wiping System, Data, etc. Clean install and I get same problem.
When I click over Phone Information, crashes with "com.android.phone has stopped" error message.
Is anyone else experiencing this ?
Any advice?
My main target was to enable Volte. I don´t know any other way to get those settings.
Thanks
This seems to be a problem on Oreo ROMs back-ported to N6. Camcory recently patched the AOSIP Oreo ROM and I'm guessing that patch will find its way to other ROMs.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers
Just for a test, I´ve reinstalled the CM14.1 and it works as it should, I mean, I can access the settings, etc. but "Volte provisioned" is greyed out.
No idea how to enable it.
Ktmom thanks for your information. So, it´s seems is a general 8.1 issue ?? No one has noticed this before?
By the way, related to this matter, How can I access the IMS Settings?
I´ve installed original Google OTA image 7.1 to see how it behaves, and you can access the Phone Information settings, and you can enable/disable all those settings; Volte, WiFi calling, etc.
So it seems LineageOS, Nitrogen, etc they are doing something different.
Cheers
EA1DDO_SGS2 said:
I´ve installed original Google OTA image 7.1 to see how it behaves, and you can access the Phone Information settings, and you can enable/disable all those settings; Volte, WiFi calling, etc.
So it seems LineageOS, Nitrogen, etc they are doing something different.
Cheers
Click to expand...
Click to collapse
As I posted earlier, this problem was recently addressed. A patched release is in the camcory AOSIP thread. I suspect the fix will make it into future releases of other ROMs.
It is a small subset of users who access this feature. It took a long time for the problem to be reported.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers
This test build
AOSiP-8.1-Test-shamu-20180625.zip
Fixes the problem
Find it @ AFH
Sent from my Motorola Nexus 6 using XDA Labs
maddog3030 said:
This test build
AOSiP-8.1-Test-shamu-20180625.zip
Fixes the problem
Find it @ AFH
Sent from my Motorola Nexus 6 using XDA Labs
Click to expand...
Click to collapse
A patched release is in the camcory AOSIP thread.
Click to expand...
Click to collapse
Got it.
Big thank you.
https://androidfilehost.com/?fid=890278863836296729
I was nearly to brick my Nexus 6 yesterday. After run AquariOS image (to try Volte), something happened and didn´t recognize my pattern unlock, even after wipe system & data from TWRP, restore backup, etc.
That´s the reason I had to fastboot original OTA image. A nightmare. Now all is back in order, apparently.
was there a solution to the problem?
Up!)
rostop4a said:
was there a solution to the problem?
Up!)
Click to expand...
Click to collapse
These are the commits to fix.
Settings
Device
rostop4a said:
was there a solution to the problem?
Up!)
Click to expand...
Click to collapse
Did you read the thread? The (only) solution was discussed .
EA1DDO_SGS2 said:
Got it.
Big thank you.
https://androidfilehost.com/?fid=890278863836296729
I was nearly to brick my Nexus 6 yesterday. After run AquariOS image (to try Volte), something happened and didn´t recognize my pattern unlock, even after wipe system & data from TWRP, restore backup, etc.
That´s the reason I had to fastboot original OTA image. A nightmare. Now all is back in order, apparently.
Click to expand...
Click to collapse
The link seems dead. any other place? i need to enable VOLTE too.
chuckiler said:
The link seems dead. any other place? i need to enable VOLTE too.
Click to expand...
Click to collapse
The camcory AOSiP 8.1 [Official] thread. Else go on android file host and search for developer camcory then look for the shamu ROMs.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
camcory said:
These are the commits to fix.
Settings
Device
Click to expand...
Click to collapse
:good:
And what should I do about it?
Just that it would be clear! =)
rostop4a said:
:good:
And what should I do about it?
Just that it would be clear! =)
Click to expand...
Click to collapse
Three possibilities:
- build a rom yourself with the fixes
- ask the person who builds your rom to include them
- use a rom where they are already included
Related
The base rom turned out to be full of small bugs and just not worth it any future work on it. Sorry...
After two days of digging around finally managed to fix the only CM13 release that doesn't have the nasty and so far impossible to fix 3G bug some of us experience with all other CM based releases to date.
I think this ROM by itself deserves a new thread despite the many we have already... Don't you agree?
Fixed Video Playback, Video Recording, Network Location, Speaker Low Volume Level... Those were the major known issues with this version...
Will get us by till 3G bug is fixed(I hope) in later ROMs.
Credits and thank you to:
@ffboy2009[/MENTION] for his 2nd CM13 release this ROM is based on;
@ajsmsg78[/MENTION] for the helium video recording fix;
This is all-in-one Mi Max UNIVERSAL CM13 ROM for both hydrogen and helium devices. It will check an install the proper version for your device.
BUT MAKE SURE YOU ARE RUNNING THE CORRECT TWRP FOR YOUR DEVICE CODE!!! HELIUM WITH OLD TWRP FOR HYDROGEN WILL BRICK!!!
If you are coming from any CM13 rom you can dirty flash. From anything else including RR clean flash is recommended! Backup device before install etc but you know what to do if reading this...
As usual install gapps etc...
Report bugs and I will try fixing them but I am very time/resources limited during the week.
Download: cm-13.0-20160614-UNOFFICIAL-hydrogen+helium-fixed_nijel8.zip
PS. Will appreciate if you guys don't link the ROM download directly anywhere else... Refer to this thread instead... Let's keep it all in one place for better feedback. Thank you!
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
n1tro said:
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
Click to expand...
Click to collapse
It's not the build.prop...
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
nijel8 said:
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
Click to expand...
Click to collapse
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works with sound. I let the phone sleep for a bit and seems to be still working.
Same here in another helium, just start to records and stop suddenly :crying:
n1tro said:
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works. I am letting the phone sleep and will test again.
Click to expand...
Click to collapse
Ok... I'll fix it... Just to be clear you are talking about this file for helium, right? Because it is not needed for hydrogen...
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
nijel8 said:
Ok... I'll fix it... Just to be clear you talking about this file for helium, right?
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
Click to expand...
Click to collapse
Yes, that is the file I used to flash after installing this rom.
n1tro said:
Yes, that is the file I used to flash after installing this rom.
Click to expand...
Click to collapse
Ok, thank you for the quick reply... We'll get it fixed right away...:good: Fixed... Uploading... Done...
Glad no flashing problems on helium. Took a slim chance by not having you or @ajsmsg78 test it on your heliums before publish it.
Skalexs said:
Same here in another helium, just start to records and stop suddenly :crying:
Click to expand...
Click to collapse
Please redownload... Just fixed it...
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
ajsmsg78 said:
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
Click to expand...
Click to collapse
Yeah... data bug is going to be difficult without proper debugging and taking logcat/dmesg logs. We both can't do that...
Let me know if you want to fix RR5.7.0 and I will give you details...
nijel8 said:
Please redownload... Just fixed it...
Click to expand...
Click to collapse
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
nijel8
Thank you!:good:
Skalexs said:
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
Click to expand...
Click to collapse
That's why I fixed exactly this one...
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Great job bro..3g working here..Greeting from Malaysia...
Helium 64gb
Sent from my MI MAX using XDA-Developers mobile app
Great Job!
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
techy97 said:
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
Click to expand...
Click to collapse
Ii didn't build this rom... I am just the fixer... Adding things is not that easy in prebuilt roms.
Even if I can add it I can't test LTE at all and I hate doing things I can't test... So probably not gonna happen, sorry...
panyan said:
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Click to expand...
Click to collapse
for me: normal use on Miui--> 1,5 days, normal use on CM-->3,5 days
This ROM should tie people over until xiaomi releases the kernel for our devices and some developers come into the picture. Amazing how much was accomplished by nijel8 and asjmsg78, both who aren't developers but had enough curiosity about our devices to tinker with it to make it a better device for all. Show some appreciation by making a donation to these guys or we all be stuck with the crappy miui ROM with no android auto and delayed notifications!
Hello guys and girls,
As some of you already know Android 8.1 suffers from a severe Multi-Touch Issue. This issues makes the smartphone randomly jumping between the two touching points on the screen when touching with two or more fingers.
The issue is known to google since the preview of 8.1. It isn´t only affecting pixel but most probably all devices running 8.1. The issue is also present on P.
An issue got created here: https://issuetracker.google.com/issues/70344455
There is a fix since mid march in review on google gerrit. But that didn´t make it into the april release, obviously.
To visualize the issue refer to the following videos:
https://youtu.be/wgYN5GwIgIc
https://youtu.be/2Vv584tvVyg
https://www.youtube.com/watch?v=4dnIk_5qdK8&feature=youtu.be
This is especially bad for gamers. With the recent release of PUBG this issues seems dramatic to some, less to others.
I´m no gamer but I noticed the issue on the google foto app.
This issue has nothing to do with the corners badly reacting to touches, or touch sensitivity etc.
So but now to the fix. It seems the issues is only related to resampling but not to touching specific points of the screen ( not related to crossing x and y axis).
That also explains why the issue wasn´t happening when using the touch tracking tool in dev settings but on various multi touch test apps.
The fix is on google gerrit currently under review here:
https://android-review.googlesource.com/c/platform/frameworks/native/+/640605
https://android-review.googlesource.com/c/platform/frameworks/native/+/640606
Last week I compiled myself a DU build with the changes included and I couldn´t trigger the issue at all. I found no other side effects caused by the two patches.
For now I decided to provide a Magisk Module which replaces the changed libs that fixes the issue.
I compiled the libs while doing my april build of DU. The magisk module can be found on the link a little bit down.
The download is here:
https://www.androidfilehost.com/?fid=890129502657595755
A few disclaimers here.
1. That fix should in theory work for most 8.1 devices, including the likes of pixel 1st gen, pixel 2nd gen, one plus, xiaomi which suffer from this severe issue.
1a. It works only for AOSP/LOS based roms on the essential phone. It seems like stock isn´t close enough to aosp.
2. I didn´t fix this, I just compiled the libs with the fix found on google gerrit.
3. Rom devs you are very welcome to include this fix. I found no ill consequences as of yet but I can understand google taking it slow and reviewing it longer. Maybe they will find a better fix, but as of now this is the best thing we have.
Donations:
Donations are not mandatory but very welcome.
If you like my work: http://paypal.me/freak07
this was confirmed working on the xda portal post by @crixley for the essential phone running a custom aosp/los based rom.
Big thanks to you!
Freak07 said:
this was confirmed working on the xda portal post by @crixley for the essential phone.
Big thanks to you!
Click to expand...
Click to collapse
Huge difference, including touch latency! I'm super pumped about it.
Work perfectly!!! Thank you so much!
Guys, does it work? For me I ended up in bootloop
xorwin said:
Guys, does it work? For me I ended up in bootloop
Click to expand...
Click to collapse
Omg you're right it actually causes my phone to not boot. I wiped my entire phone thinking it was some kind of module conflict and now it still wont boot.
xorwin said:
Guys, does it work? For me I ended up in bootloop
Click to expand...
Click to collapse
wind711 said:
Omg you're right it actually causes my phone to not boot. I wiped my entire phone thinking it was some kind of module conflict and now it still wont boot.
Click to expand...
Click to collapse
I bootlooped too. Flashing the stock boot image fixed it and my phone booted right to Android.
Jank4AU said:
I bootlooped too. Flashing the stock boot image fixed it and my phone booted right to Android.
Click to expand...
Click to collapse
Once I flashed the stock boot image I lost magisk so that wouldn't work.
wind711 said:
Once I flashed the stock boot image I lost magisk so that wouldn't work.
Click to expand...
Click to collapse
I wasn't worried about losing Magisk. I was trying to get my phone to boot.
@crixley what did you do to get it to work? For three of us it results in a bootloop.
Jank4AU said:
I wasn't worried about losing Magisk. I was trying to get my phone to boot.
@crixley what did you do to get it to work? For three of us it results in a bootloop.
Click to expand...
Click to collapse
I'm not on stock rom, that might be it. Should have been clear on that
crixley said:
I'm not on stock rom, that might be it. Should have been clear on that
Click to expand...
Click to collapse
Yeah, I'm on stock so you're probably right, that might be it.
Thank you soo much @Freak07 !
I installed with with magisk app as a module. Booted perfect
tomzefi said:
I installed with with magisk app as a module. Booted perfect
Click to expand...
Click to collapse
Are you on stock or custom ROM?
Jank4AU said:
Are you on stock or custom ROM?
Click to expand...
Click to collapse
Should have mentioned that. I am on resurrection remix and rooted.
Confirmed that it also bootloops on stock ROM, if you have ElementalX Kernel installed.
It seems that the stock rom isn’t close enough to aosp so this fix will only work on custom roms!
I edited the OP accordingly to the stock rom issue.
In the meantime can one of you guys on the stock rom do me a favour and check if you have libinputflinger.so and libinput.so located in system/lib and system/lib64 or if the libs are somewhere in vendor for you?
They exist both files.
hypnz said:
They exist both files.
Click to expand...
Click to collapse
It should be 4 files overall. libinput.so and libinputflinger.so have to be in system/lib and additionally in system/lib64.
but if they are in system and not in system/vendor then I have no way of fixing it atm I fear.
Hi There Everyone!First a brief: I've been a longtime XDA user, but never found the need to create an account. Now, I bought a Redmi 6 and I'm really disappointed by the development:crying:, so I thought i'd chip in a bit I don't have permission yet, so I posted this here.
As you know, till now there are NO Custom ROM's available. This is really sad, and I can't live with MIUI. So I decided to give GSI (Generic System Image) ROM's a try.
And guess what? They work! I tried installing Lineage OS 15.1 on our cereus. The rom is really fast and smooth. Here's what I found:
Working:
Wifi
Bt
Camera
Vibration
Sound
Finger Print
Bugs:
SIM detected, but no range found. RIP calls/sms/data. Looks like a problem with the raido's.
Headphones don't work
I couldn't test hotspot and gps.
Even though there is a bad bug, it still works surprisingly on this MediaTek SoC with no drivers / kernels. All we need is a little paching and we should be good to go!
Give it a try. Ill post guide on how to do this later. For now, i'm using miui cuz i wanna make phone calls
Here are screenshots:
https://ibb.co/J7FRk9K
https://ibb.co/sbNk3N4
https://ibb.co/K5KDW43
https://ibb.co/5Mfrz0d
https://ibb.co/kHCwqb2
https://ibb.co/S3X9gkv
https://ibb.co/1JYNmqp
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
What about finger print reader?
TanRayCz said:
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
Click to expand...
Click to collapse
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
hiitsrudd said:
What about finger print reader?
Click to expand...
Click to collapse
It works! Sorry, I forgot to mention that - added it now :good: Btw, even though it works, it isn't as accurate and as fast as MIUI.
Tech_Expert said:
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
Click to expand...
Click to collapse
I meant to say good job about putting this all together. Nice.
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
TanRayCz said:
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
Click to expand...
Click to collapse
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Tech_Expert said:
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Click to expand...
Click to collapse
All i tried was LOS and Pixel Eperience. Both are same, except PE has Android 9.0. I tried treble RR, it had really cool logo while booting, and i was really excited for RR because i never tried it. But i never made it to boot. Boot logo is looping infinitely and i tried fresh installing (With MiFlash clear) about 10 times.
Edit: Maybe if you would want to, you can give it a try https://forum.xda-developers.com/pr...0-resurrection-remix-v7-0-arm64-32-b-t3891636
Edit: I didn't understand most of it, but i could start adb logcat while booting. From all i could understand, all apps were dying and restarting all over.
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
[email protected] said:
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
Click to expand...
Click to collapse
That's nice and all, but more info would be cool. SIM works?
TanRayCz said:
That's nice and all, but more info would be cool. SIM works?
Click to expand...
Click to collapse
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
[email protected] said:
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
Click to expand...
Click to collapse
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
JosifBoga666 said:
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
Click to expand...
Click to collapse
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
[email protected] said:
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
Click to expand...
Click to collapse
But this doesn't fix ussd right?
JosifBoga666 said:
But this doesn't fix ussd right?
Click to expand...
Click to collapse
I haven't tested this, but why do you think so?
[email protected] said:
I haven't tested this, but why do you think so?
Click to expand...
Click to collapse
Since you said ussd is broken by default i thought that that wouldn't fix it.
JosifBoga666 said:
Since you said ussd is broken by default i thought that that wouldn't fix it.
Click to expand...
Click to collapse
By default — right after installing, without adding this line.
[email protected] said:
By default — right after installing, without adding this line.
Click to expand...
Click to collapse
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
JosifBoga666 said:
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
Click to expand...
Click to collapse
It doesn't work for me. Same as every single other GSI rom.
Your warranty is now void blah blah blah I'm not responsible for your toaster going rogue on you.
LAST AOSiP10 BETA BUILD?? SEE THIS POST - https://forum.xda-developers.com/showpost.php?p=80702799&postcount=86
EOL = THIS ROM IS NOW FINITO! AICP15 COMING SOON!
---
Bugs? You tell me. With logs. Pretty stable tho and most stuff working.
Q is still very early on in its development. I find it works decently enough for a daily driver.
Trees used are on my github. Kernel tree so mods don't delete the thread: [url]https://github.com/celtare21/kernel_essential_msm8998-1[/URL]
NOTE: This thread is maintained by me. The ROM is built by KuranKaname using his own sources (which you can see above).
Thank you so much for your work
Just one question: is the trusted face (face unlock) working? Thank you very much, I'll test it out and I'll let you know if are there any bugs ?
...
SteLomby said:
Just one question: is the trusted face (face unlock) working? Thank you very much, I'll test it out and I'll let you know if are there any bugs ?
Click to expand...
Click to collapse
Thanks! Myself I know that trusted face is from the gapps selection, which right now it's pretty minimal so it's not present. Haven't tried installing P one or Pixel dump one tho
First update is live, edited link in thread
Does this support f2fs like your other builds ?
Jz5678910 said:
Does this support f2fs like your other builds ?
Click to expand...
Click to collapse
yes, f2fs is supported.
Update 2 is live. Link and changelog updated
KuranKaname said:
Thanks! Myself I know that trusted face is from the gapps selection, which right now it's pretty minimal so it's not present. Haven't tried installing P one or Pixel dump one tho
Click to expand...
Click to collapse
I've tried flashing pie open gapps but they won't install as it detects the Android version as incompatible.
I also found this one: cyanogenmods.org/downloads/bitgapps-for-android-10-download
But when I flash it from twrp, the ROM won't boot anymore.
Can you fix it plz?
Man, i love you!
Now it's time to switch to Android 10!
Edit: It looks like ROM download link is not working, can you fix please?
dark.wizard said:
Man, i love you!
Now it's time to switch to Android 10!
Edit: It looks like ROM download link is not working, can you fix please?
Click to expand...
Click to collapse
My bad forgot up update. Link and update up
SteLomby said:
I've tried flashing pie open gapps but they won't install as it detects the Android version as incompatible.
I also found this one: cyanogenmods.org/downloads/bitgapps-for-android-10-download
But when I flash it from twrp, the ROM won't boot anymore.
Can you fix it plz?
Click to expand...
Click to collapse
Gapps will come with time, the packages are still alpha/beta
Lineage has too few customization options. I hope other roms will appear earlier. Do you know if it will appear within a month?
冰糖葫芦娃 said:
Lineage has too few customization options. I hope other roms will appear earlier. Do you know if it will appear within a month?
Click to expand...
Click to collapse
PIxel Experience 10 will come with gapps soon
How do I install an update? I'm in update 2
I like cake
HueyT said:
PIxel Experience 10 will come with gapps soon
Click to expand...
Click to collapse
PIxel Experience also has a few custom options, expect more rom
---From Google Translation---
giovann134 said:
How do I install an update? I'm in update 2
Click to expand...
Click to collapse
Flash ROM
Flash twrp
Reboot twrp
Flash Gapps
then magisk if you want.
Am I being dumb? The gapps package doesn't install anything. No Play Store, no setup on first boot. Just doesn't do it on a completely clean install.
Third flash is a charm I guess. Weird... Still no setup on a factory reset though which sucks since you can't restore your info from Google.
Tanner1294 said:
Am I being dumb? The gapps package doesn't install anything. No Play Store, no setup on first boot. Just doesn't do it on a completely clean install.
Third flash is a charm I guess. Weird... Still no setup on a factory reset though which sucks since you can't restore your info from Google.
Click to expand...
Click to collapse
Yeah there's no setup wizard. But don't worry, compiled Aosip Q and put in built in pixel gapps. Will release later
:good:Thank you for the hard work
vlad3647 said:
:good:Thank you for the hard work
Click to expand...
Click to collapse
Naaaa...Tanks to @pduper:silly:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
pmduper said:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
Click to expand...
Click to collapse
yes...I installed earlier and I think its the best of the new Android 10 Roms for our device....I installed the Intelli Kernel and raised the volume levels....the lag in settings is a pain... I noticed the gear on the footer of quick settings wont work unless you bring the pull down all the way out....My guess is an overlay is probably in conflict with the system ui
Test Build Upload ...
Download.
luisgonzales1977 said:
Test Build Upload ...
Download.
Click to expand...
Click to collapse
Would love to test this but very happy with your other test build MSM Xtended that I have been using it all day with no problems..thanks again for the work you are putting into these roms
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
SmgKhOaRn said:
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
Click to expand...
Click to collapse
Lineage os is ****..best pie os is DOT OS 3.1
Skerleton said:
Lineage os is ****..best pie os is DOT OS 3.1
Click to expand...
Click to collapse
Wrong thread mate. Take your disrespectful comments elsewhere!!
Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
Oh no!! And on top of all that mummy didn't give you any lunch money! I feel for you my friend, I really do. It must be so tough going through life with no respect for anyone, especially when they are working hard and free of charge to bring your aging device up to date, God that sucks doesn't it.l?! Tell you what, you go and enjoy your pie and the grown ups will come and let you know when all these iddy biddy widdle bugs have gone.
I can't download the link, because the file was deleted.
Who can give me a download link?
Thanks!
Access denied where can I download the rom?
n_boy86 said:
Access denied where can I download the rom?
Click to expand...
Click to collapse
Try this link ?
https://qc5.androidfilehost.com/dl/...3197/Bliss-v12.2-klte-UNOFFICIAL-20200130.zip
I expected many Problems when migrating to a q Rom. Waited until today and started with Bliss.
And all i can say is that this Rom is awesome in responsiveness and Options. Everything is working so far. Only Thing is that there is no selinux set for now.
But that is okay. Everything else just works amazingly good!
Phone (with Recorder outofthebox), Camera, all Google Apps, WiFi, Mobile Data, Magisk
Also my 128g sd was set up as adopted storage and uses f2fs by Default. Nice!
Not a single glitch or freeze.
Will consider using this as my daily Driver.
Coming from LineageOS16
Big thanks to the devs from bliss project and OP of this Thread!!!!
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
ajox said:
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
Click to expand...
Click to collapse
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
You have to disable gesture navigation bar to remove that blank.
SmgKhOaRn said:
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
Click to expand...
Click to collapse
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to usw F2FS formated system Partition right?
Think i will give it a chance this weekend.
SmgKhOaRn said:
You have to disable gesture navigation bar to remove that blank.
Click to expand...
Click to collapse
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
ajox said:
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to use F2FS formated system Partition right?
Think i will give it a chance this weekend.
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
Click to expand...
Click to collapse
IDK since I don't like that kernel...
I didn't tested on this rom (using other Q rom now) so You can try and tell about the results... (Backup data first, don't need it on cache if you want...)
Just search it in setting's search section (type gesture if you can't find)...
Or remove qemu.hw.mainkeys=0 in build prop...
Can't use f2fs in System partition lol...
It will force to install as ext4 even you format it to f2fs...
This is all same in other roms...