Database Develop

My banking app is not starting bc xposed installed

Guys I need your help. My banking app won't start since it is finding xposed framework installed. Since it is Android OS I don't believe there is no way to change it. I have marshmallow 6.0.1 and the app is vr banking (https://www.vr-banking-app.de/service/hookinghinweis.html). I checked xprivacy and blocked there all except Internet access but either it didn't work or I did smt false.
Gesendet von meinem SM-N910F mit Tapatalk

Dexter666 said:
Guys I need your help. My banking app won't start since it is finding xposed framework installed. Since it is Android OS I don't believe there is no way to change it. I have marshmallow 6.0.1 and the app is vr banking (https://www.vr-banking-app.de/service/hookinghinweis.html). I checked xprivacy and blocked there all except Internet access but either it didn't work or I did smt false.
Gesendet von meinem SM-N910F mit Tapatalk
Click to expand...
Click to collapse
There is no way to hide Xposed, you'll have to remove it or use something like rootswitch to temp disable it with a soft reboot
Sent from my SPH-L720 using Tapatalk

Dexter666 said:
Guys I need your help. My banking app won't start since it is finding xposed framework installed. Since it is Android OS I don't believe there is no way to change it. I have marshmallow 6.0.1 and the app is vr banking (https://www.vr-banking-app.de/service/hookinghinweis.html). I checked xprivacy and blocked there all except Internet access but either it didn't work or I did smt false.
Gesendet von meinem SM-N910F mit Tapatalk
Click to expand...
Click to collapse
As an alternative to what Matt has suggested, you could use SuperSU and suhide in combination with Root Switch and Xposed. All required information can be found in the suhide thread here on XDA. Just search for it.

Dexter666 said:
Guys I need your help. My banking app won't start since it is finding xposed framework installed. Since it is Android OS I don't believe there is no way to change it. I have marshmallow 6.0.1 and the app is vr banking (https://www.vr-banking-app.de/service/hookinghinweis.html). I checked xprivacy and blocked there all except Internet access but either it didn't work or I did smt false.
Gesendet von meinem SM-N910F mit Tapatalk
Click to expand...
Click to collapse
A little surprised by this. What kind of security does the bank use? Are there no security ID system connected to the German state? In Sweden there's Bank-ID for computers, Mobilt bank-ID for smartphones. Authorities, banks and other companies use it. Banks are indirectly required to by law since +1 year. No login by just a simple ATM like code allowed anymore.
A last resort, if everything else fails, is to simply change bank.
[Written by my thumbs on a state-of-the-art Nokia 3110.]

All my banking apps threw errors and I installed Root Cloak module and added them there. And things were good.
But then an e-wallet app showed error "app has been hooked by 3rd party app" because it was checking Root as well as Xposed. so a XDA member wrote a module which just returns 'No' when the app checks fro Xposed.
You can try a similar thing. here's the thread.
http://forum.xda-developers.com/xposed/modules/xposed-freecharge-unblocker-t3511904

Hey there,
I just found this thread and got the exact same problem.
A few weeks/months ago, my banking app (VR Banking as described in OP) started crashing
if XPosed was installed. They tell you something about security, but it works fine with root and uninstalled XPosed.
There already was a link to this thread (https://forum.xda-developers.com/xposed/modules/xposed-freecharge-unblocker-t3511904)
providing a seemingly working solution for another app.
VR Banking seems to react to installed XPosed-binary AND installed Xposed-App, but isn't it possible to hook into the checking-process
and just return true/false ("everything is fine")?
Don't want to switch my bank because of this (although their policy of accepting root but not xposed is 100% ridiculous)
as it seems like such an easy solution. I already PM'd a developer of a module that hides root from certain bank app, but sadly no response yet...

Same problem here with another bank/country and MM (cm13).
The problem is only xposed manager itself. As soon as have it installed (even without framework) the bank app stops. Root only (cm or supersu) is not a problem.
I tried magisk + systemless root + systemless xposed (framework) + hide apps (like rootcloak, anrc,...) and no success. Bank always find the xposed manager (probably because I couldn't hide it completely).
We need a better general hide everything xposed solution. Hope some developer can work on that. Maybe magisk can be the way.

wilsonhlacerda said:
Same problem here with another bank/country and MM (cm13).
The problem is only xposed manager itself. As soon as have it installed (even without framework) the bank app stops. Root only (cm or supersu) is not a problem.
I tried magisk + systemless root + systemless xposed (framework) + hide apps (like rootcloak, anrc,...) and no success. Bank always find the xposed manager (probably because I couldn't hide it completely).
We need a better general hide everything xposed solution. Hope some developer can work on that. Maybe magisk can be the way.
Click to expand...
Click to collapse
Just a quick thought to add to the mix... specifically for your banking app, have you tried the Sudohide Xposed module? It allows you to hide any app from any other app. I'm not sure at which level it happens in the boot process, but for your scenario, it's worth a try. You could just hide the Xposed manager app from the banking app and see if it works.
Let us know if it does!

Hi,
I gave it a quick try:
SudoHide Xposed Installer from VR Banking App and Rootcloak for VR Banking App, but the app still detects it on open.
SudoHide lists only Xposed Installer, no other Xposed app/module.

Dexter666 said:
Guys I need your help. My banking app won't start since it is finding xposed framework installed. Since it is Android OS I don't believe there is no way to change it. I have marshmallow 6.0.1 and the app is vr banking (https://www.vr-banking-app.de/service/hookinghinweis.html). I checked xprivacy and blocked there all except Internet access but either it didn't work or I did smt false.
Gesendet von meinem SM-N910F mit Tapatalk
Click to expand...
Click to collapse
Simply just uninstall Xposed Framework and Xposed Installer from your. Then backup the data and perform factory reset and then try it will 100 % work. Good luck

Sony developers said:
Simply just uninstall Xposed Framework and Xposed Installer from your. Then backup the data and perform factory reset and then try it will 100 % work. Good luck
Click to expand...
Click to collapse
Yes, exactly. You are the kind of people why we got Donald Trump for president of the United States.
Seriously, if you can't help, don't answer.
I have the same problem, and it seems that german banking apps are somewhat stupid.
Root is allowed (which can be done by almost everybody), but xposed is denied, because PRO developers might hack their sh1tty apps with hooks...?

Lonesome Walker said:
Yes, exactly. You are the kind of people why we got Donald Trump for president of the United States.
Seriously, if you can't help, don't answer.
I have the same problem, and it seems that german banking apps are somewhat stupid.
Root is allowed (which can be done by almost everybody), but xposed is denied, because PRO developers might hack their sh1tty apps with hooks...?
Click to expand...
Click to collapse
I like this comment, :laugh::laugh::laugh::laugh::laugh::laugh:

Get a cheap Android phone there u go

Magisk and MagiskHide are working fine to hide root from my German VR banking app.
Sent from my EML-L29 using Tapatalk

PokemonGO won't work with Magisk

I'm using ResurrectionRemix Rom on my LG G3 Beat and Pokemon GO v. 0.67.2 and as soon as I install Magisk (used MagiskHide and tried many things) v. 12 or v. 13 beta it stops working. My device passes SafetyNet so it should not be a issue. Someone having this issue too? How can I fix that?
Edit: I finally found the issue. It's KernelAdiutor.

Thinkofname said:
I'm using ResurrectionRemix Rom on my LG G3 Beat and Pokemon GO v. 0.67.2 and as soon as I install Magisk (used MagiskHide and tried many things) v. 12 or v. 13 beta it stops working. My device passes SafetyNet so it should not be a issue. Someone having this issue too? How can I fix that?
Click to expand...
Click to collapse
Why do you use a pogo version that isn't forced yet? 0.67.1 works totally fine.
No need to update, especially not, if you don't know what the update contains and what it is doing.

Go to magisk settings and then to tick the "core only mode" checkbox. Reboot and you are done.
Google has strenghten SN policies and now Magisk modules functionality makes you fail SN check. The temporary solution is to disble all modules related functionality following the steps above.
Sent from my SM-G930F using Tapatalk

I've created a Pokemon Trainer Club account, just for these occasions, when once in a while someone comes in and have issues with PoGo not starting. Anyway...
Tried both 0.67.1 and 0.67.2 and they start up just fine on Magisk v13.0 (54e6a79) beta, OnePlus 3T, OxygenOS 4.1.6, Franco Kernel r24 and nothing else done except having enabled Magisk Hide. Does Resurrection Remix have ro.build.tags set to "release-keys" (and so on)?

DaSoul said:
Why do you use a pogo version that isn't forced yet? 0.67.1 works totally fine.
No need to update, especially not, if you don't know what the update contains and what it is doing.
Click to expand...
Click to collapse
On 0.67.1 I had the same issues
coto39 said:
Go to magisk settings and then to tick the "core only mode" checkbox. Reboot and you are done.
Google has strenghten SN policies and now Magisk modules functionality makes you fail SN check. The temporary solution is to disble all modules related functionality following the steps above.
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Tried it, but it won't work, I'm using this module to fix my safetynet bypass but it still don't work with it.
Didgeridoohan said:
I've created a Pokemon Trainer Club account, just for these occasions, when once in a while someone comes in and have issues with PoGo not starting. Anyway...
Tried both 0.67.1 and 0.67.2 and they start up just fine on Magisk v13.0 (54e6a79) beta, OnePlus 3T, OxygenOS 4.1.6, Franco Kernel r24 and nothing else done except having enabled Magisk Hide. Does Resurrection Remix have ro.build.tags set to "release-keys" (and so on)?
Click to expand...
Click to collapse
Checking that, I'll edit this comment when I've done that
Edit: Universal SafetyNet Fix edits them already

Are you able to pass safetynet check?
Sent from my SM-G930F using Tapatalk

coto39 said:
Are you able to pass safetynet check?
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
That's what it says in the OP...

Didgeridoohan said:
That's what it says in the OP...
Click to expand...
Click to collapse
Ups. My bad.. I forgot about that.
Sent from my SM-G930F using Tapatalk

Btw. I found out using Magisk v. 13 beta with Core Modules Only does not pass SafetyNet, not even Basic Integrity. Seems a bit strange.

Found something in the magisk logs, there is a entry for every app that is listened in my Magisk hide List but not for pokemon go

Thinkofname said:
Found something in the magisk logs, there is a entry for every app that is listened in my Magisk hide List but not for pokemon go
Click to expand...
Click to collapse
It doesn't have to be on the list. It's using SafetyNet that is on there by default.

Didgeridoohan said:
It doesn't have to be on the list. It's using SafetyNet that is on there by default.
Click to expand...
Click to collapse
But what exactly makes it don't run?
Rootbeer sample in hide-list does not detect root at all...

Thinkofname said:
But what exactly makes it don't run?
Rootbeer sample in hide-list does not detect root at all...
Click to expand...
Click to collapse
No idea... If you're passing SafetyNet you've got some other issue than it detecting root.

Thinkofname said:
Btw. I found out using Magisk v. 13 beta with Core Modules Only does not pass SafetyNet, not even Basic Integrity. Seems a bit strange.
Click to expand...
Click to collapse
Try Using Universal SafetyNet Fix v2 Beta 3 with Magisk v12
and, what did you mean when says doesn't work? I guess you may have mock locations in dev settings enabled or Xposed installed.

I think I found the issue! I completly reinstalled RR, Magisk etc. with my apps but don't configured my other apps. Pokemon GO worked fine. After configuring Kernel Adiutor it doesn't let me in.
Edit: Yep, uninstalled it, reboot and started PoGo, it's working.

Thinkofname said:
I think I found the issue! I completly reinstalled RR, Magisk etc. with my apps but don't configured my other apps. Pokemon GO worked fine. After configuring Kernel Adiutor it doesn't let me in.
Edit: Yep, uninstalled it, reboot and started PoGo, it's working.
Click to expand...
Click to collapse
Would interesting know what configuration you did in Kernel Adiutor, it can helps others.
Edit: @Didgeridoohan how many times did occurs this to we? xd

Thinkofname said:
I think I found the issue! I completly reinstalled RR, Magisk etc. with my apps but don't configured my other apps. Pokemon GO worked fine. After configuring Kernel Adiutor it doesn't let me in.
Edit: Yep, uninstalled it, reboot and started PoGo, it's working.
Click to expand...
Click to collapse
Great. I'm curious as to what you're doing with Kernel Adiutor to cause this issue?
Edit: Ninja'd!

Didgeridoohan said:
Great. I'm curious as to what you're doing with Kernel Adiutor to cause this issue?
Edit: Ninja'd!
Click to expand...
Click to collapse
Just lowered my max. cpu freq, max. gpu freq, edited some cpu governor settings and edited my lmk settings.

Guys, I wonder, is anyone able to run Pokemon Go with other modules enabled in Magisk or is it still not possible ? With Viper4Android to be precise.

MartinMGS said:
Guys, I wonder, is anyone able to run Pokemon Go with other modules enabled in Magisk or is it still not possible ? With Viper4Android to be precise.
Click to expand...
Click to collapse
Did you try Universal SafetyNet Fix v2 Beta 4? Is in the first page of this sub-forum

When is safetynet needed?

I want to use a few xposed modules but it causes magisk to no longer pass safetynet check.Using "magisk core only mode" lets it pass but disables xposed. I know I need safetynet check when I log into snapchat, but what else is it needed for? Am I able to disable it when I need to re-log into snapchat etc, then re-enable it after that?

Android Pay requires a passing SN.
Sent from my A0001 using Tapatalk

JJohnson1988 said:
Android Pay requires a passing SN.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
No it doesn't, not a full pass anyway, I have xposed therefore SafetyNet partly fails but I still use Pay
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk

y2klol said:
I want to use a few xposed modules but it causes magisk to no longer pass safetynet check.Using "magisk core only mode" lets it pass but disables xposed. I know I need safetynet check when I log into snapchat, but what else is it needed for? Am I able to disable it when I need to re-log into snapchat etc, then re-enable it after that?
Click to expand...
Click to collapse
Some banking apps need it. If none of your other apps stop working then nothing. Safetynet is only needed for apps that require it.

Mr.R™ said:
No it doesn't, not a full pass anyway, I have xposed therefore SafetyNet partly fails but I still use Pay
Click to expand...
Click to collapse
How have you achived, that you partly pass SafetyNet?

retip94 said:
How have you achived, that you partly pass SafetyNet?
Click to expand...
Click to collapse
No Device Check module on Xposed
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk

Interesting that Android Pay doesn't use the full SafetyNet check (basic integrity)...

Mr.R™ said:
No it doesn't, not a full pass anyway, I have xposed therefore SafetyNet partly fails but I still use Pay
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk
Click to expand...
Click to collapse
What version of android are you on - 6 or 7?
Magisk or SuperSU?
Systemless Xposed?

For me-Android Pay, Banking App, Netflix, Snapchat, peace of mind.
Pokemon go(if somebody is still playing)

n19htmare666 said:
What version of android are you on - 6 or 7?
Magisk or SuperSU?
Systemless Xposed?
Click to expand...
Click to collapse
7
Magisk
Systemless
Sent from my SM-G935F/FD/W8/S/K/L using Tapatalk

Barclays banking app

I have installed the canary build as suggested by other people then used magiskhide to hide the banking app. I have also hidden the magisk app but still detects root.
Any other ideas?
Anyone got the barclays app working?

You need to hide magisk manager too inside its options. When you hide it (the option to hide is inside Magisk Manager) the app will be renamed Manager only
https://imgur.com/gallery/3Cc9ELx

Add Rootbeer to the Hide list as well, so you know for sure that MagiskHide is working as it should. If MagiskHide works all checkmarks should be green.
More hiding tips here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
@joluke They already have, as stated in the OP and it's also seen in the screenshot of the Manager.

Didgeridoohan said:
Add Rootbeer to the Hide list as well, so you know for sure that MagiskHide is working as it should. If MagiskHide works all checkmarks should be green.
@joluke They already have, as stated in the OP and it's also seen in the screenshot of the Manager.
Click to expand...
Click to collapse
Oh. Didn't notice then. Thanks for correcting me

stephenuk1996 said:
I have installed the canary build as suggested by other people then used magiskhide to hide the banking app. I have also hidden the magisk app but still detects root.
Any other ideas?
Anyone got the barclays app working?
Click to expand...
Click to collapse
Does it mean Paypal and Barclays app won't work because they see the root? I wanted to root my OP6 but didn't want to be in same position. I need either Paypal and Barclays app working... Thank you
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk

Didgeridoohan said:
Add Rootbeer to the Hide list as well, so you know for sure that MagiskHide is working as it should. If MagiskHide works all checkmarks should be green.
More hiding tips here:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
@joluke They already have, as stated in the OP and it's also seen in the screenshot of the Manager.
Click to expand...
Click to collapse
Have done that now but still red Cross on the busybox section

islandman75 said:
Does it mean Paypal and Barclays app won't work because they see the root? I wanted to root my OP6 but didn't want to be in same position. I need either Paypal and Barclays app working... Thank you
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk
Click to expand...
Click to collapse
PayPal app works but barclays app is hard to bypass

stephenuk1996 said:
Have done that now but still red Cross on the busybox section
Click to expand...
Click to collapse
There you go... It's perfectly possible that's what the app is looking for. Remove any previously installed busybox (some systems comes with it preinstalled), and if you need it install from the Manager downloads instead.

Tried to remove it but can't find it, I reinstalled over it but still showing red cross

stephenuk1996 said:
Tried to remove it but can't find it, I reinstalled over it but still showing red cross
Click to expand...
Click to collapse
Disable the busybox module and reboot. After that, type which busybox in terminal and you'll find where it's located.

I deleted it from the sbin but after reboot it came back still red cross on the busybox section

Didgeridoohan said:
Disable the busybox module and reboot. After that, type which busybox in terminal and you'll find where it's located.
Click to expand...
Click to collapse
I deleted it from the sbin folder but comes back after reboot so still red cross showing

stephenuk1996 said:
I deleted it from the sbin folder but comes back after reboot so still red cross showing
Click to expand...
Click to collapse
In other words it's a part of your system and you won't be able to use the app until you figure that out (I've tested Barclays and Magisk can hide from it just fine). Could be the kernel that's installing it, as an example. If you're using a custom ROM and/or a custom kernel, ask for advice there.
And why the double posting in the general thread? As you see your just getting the same answers, and also adding noise...

stephenuk1996 said:
PayPal app works but barclays app is hard to bypass
Click to expand...
Click to collapse
Did you make Barclays works eventually?

islandman75 said:
Did you make Barclays works eventually?
Click to expand...
Click to collapse
See my previous post:
(I've tested Barclays and Magisk can hide from it just fine)
Click to expand...
Click to collapse

Didgeridoohan said:
See my previous post:
Click to expand...
Click to collapse
Thank you

Didgeridoohan said:
See my previous post:
Click to expand...
Click to collapse
Hi I'm still stuck. OP6, SmurfKernel and xXx Rom. Before the Rom, the Barclays app was working fine. After that when I open it, it recognizer that the device is rooted. I've notice the Rom installed BusyBox... Àny idea on how to make it work again? Thank you

islandman75 said:
Hi I'm still stuck. OP6, SmurfKernel and xXx Rom. Before the Rom, the Barclays app was working fine. After that when I open it, it recognizer that the device is rooted. I've notice the Rom installed BusyBox... Àny idea on how to make it work again? Thank you
Click to expand...
Click to collapse
Sounds like it's the ROM then. And, Busybox would be a likely suspect. I'd start by removing it...

Any news? Did you manage to understand if it's the rom giving you the problem?

push TAN - app detecting root

The Problem:
The App detects the device is rooted and thus redirects to a browser with a message saying it can not be run on a rooted device etc.
What I've got so far:
-Magisk hide does nothing
-https://forum.xda-developers.com/apps/magisk/santander-app-custom-rom-root-device-t3794753/post77321403 A could be hint to a solution
It works once the Magisk app is deleted
My Question:
How could I have Magisk installed and still have the push TAN app work?
APP:https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan&hl=de

Have you renamed magisk apk? There's an option in settings.
Sent from my M2002J9G using Tapatalk

renaming does nothing,here in germany its easy to use push tan apps,in my case and i am by the Sparkasse Leverkusen just go to your Sparkasse and say ur phone is not rooted,just old,after some minutes you can use spush tan app with every root method or magisk!!!!Cheers!!!

TheOne9373 said:
The Problem:
The App detects the device is rooted and thus redirects to a browser with a message saying it can not be run on a rooted device etc.
What I've got so far:
-Magisk hide does nothing
-https://forum.xda-developers.com/apps/magisk/santander-app-custom-rom-root-device-t3794753/post77321403 A could be hint to a solution
It works once the Magisk app is deleted
My Question:
How could I have Magisk installed and still have the push TAN app work?
APP:https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan&hl=de
Click to expand...
Click to collapse
I have seen this post today and remebered your problem, check this out.
https://forum.xda-developers.com/apps/magisk/guide-how-to-hide-root-bank-applications-t4172127
Enviado de meu POCOPHONE F1 usando o Tapatalk

[email protected] said:
I have seen this post today and remebered your problem, check this out.
https://forum.xda-developers.com/apps/magisk/guide-how-to-hide-root-bank-applications-t4172127
Enviado de meu POCOPHONE F1 usando o Tapatalk
Click to expand...
Click to collapse
It does not work on this application, the problem is solved by the latest magisk manager 8.0.0 and repackaging it to a different name, hiding S-pushTAN and it works :highfive:

Spartacus500 said:
It does not work on this application, the problem is solved by the latest magisk manager 8.0.0 and repackaging it to a different name, hiding S-pushTAN and it works :highfive:
Click to expand...
Click to collapse
Confirmed with DKB PushTAN App

I tried it like this, but it's still not working. What magisk version are you on?

Dark_Lion64 said:
I tried it like this, but it's still not working. What magisk version are you on?
Click to expand...
Click to collapse
Today New version magisk manager update

pushTAN App by Sparkasse is not working with LOS 18.1 @OP6 with latest Magisk 23. Any solutions?

Hi guys
After a while of test try test try So on. I find a solution that work for the one of my devices that I use for. Its a huawei p10 lite. So first it had openkirin lineagos 16 build 6 but this Firmware have to many little Bugs like Bluetooth no connection with Mi Band Smartwatch but with soundbar no problem, then camera Bug...often it doesn't safe the createt pics and vids. Thats very argh when snapshots not safe and not Anke to reproduce, and some other. Some time goes by and now I have lineagos 18.1 for p8 lite 2017 codename prague. The p10 lite warsaw WAS-LX1A working well with it. I just had to downgrade the Stock ROM from 8.0.0C432B398 to B378 for headshot the build number error. The settings in magisk should be clear for every one...i think
So first I reboot TWRP and clear Cache and Dalvik. Reboot to System and adjust magisk (hide and repack) the repack needs a little while so just keep cool and wait. Then install the pushtan App Version 1.50. ask Google for apk. Or pm me and I send you This is the last that working for me. My different magisk version I use was 19.3 phh, 20,4 phh and one for Android 11. that is moddet for huawei p10 lite. Take a look in xda forum and you will find it. If the normal magisk for A11 running on your device then use it. On huawei we need the mod one.
So now the apk was installed you first open magisk and choose pushtan in hide Option. Then reboot to TWRP and delete Cache and Dalvik again. After that you can reboot to System...fingerscross could not be wrong in this moment hihi...now the great moment is coming. Start the app and your Facial expression would show if it work or not for me it does.
Hmmm Warum schreibe ik eigentlich english bei ner Sparkassen App xD
So good luck for you
solong
speedson

Pundy said:
pushTAN App by Sparkasse is not working with LOS 18.1 @OP6 with latest Magisk 23. Any solutions?
Click to expand...
Click to collapse
Use Magisk Canary, use Hide Magisk for "S-pushTAN", Repack Magisk with another name like "Manager" f.e. , get the App "Airfrozen" and freeze Magisk Manager with it.
After this steps you can use "S-pushTAN" without any problems.
If its still not working after that, make sure everything named "Magisk" like ZIPs or Folders are deleted.

bLack_Q said:
Use Magisk Canary, use Hide Magisk for "S-pushTAN", Repack Magisk with another name like "Manager" f.e. , get the App "Airfrozen" and freeze Magisk Manager with it.
After this steps you can use "S-pushTAN" without any problems.
If its still not working after that, make sure everything named "Magisk" like ZIPs or Folders are deleted.
Click to expand...
Click to collapse
Thank you very much! Now it works.
Renaming the App and Airfrozen is the key.

Pundy said:
Thank you very much! Now it works.
Renaming the App and Airfrozen is the key.
Click to expand...
Click to collapse
Nice, glad I could help. If you dont use "S-pushTAN" anymore you can simply unfreeze Magisk.

bLack_Q said:
Nice, glad I could help. If you dont use "S-pushTAN" anymore you can simply unfreeze Magisk.
Click to expand...
Click to collapse
Not working with comdirect phototan.
Any suggestions?

Laptapper said:
Not working with comdirect phototan.
Any suggestions?
Click to expand...
Click to collapse
Unfortunately I have never used that app. But if I come up with something I will let you know.