Related
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
cfw950116 said:
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
Click to expand...
Click to collapse
I was in the same situation. Mi recovery without adb and
and fastboot only. I'm on the phone and can't post links but if you go to the repartitioning thread and find my posts(there are not many)read it through and you will find a link to "how to fastboot" thread. If your computer recognizes your phone in fastboot mode than you'll be fine. Download from the same thread repartitioning to stock from the HTC mania guy if you want to flash miui with miflash. Otherwise it won't work. Good luck.
ashish289 said:
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
Click to expand...
Click to collapse
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
gauravsaini964 said:
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
Click to expand...
Click to collapse
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
ashish289 said:
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
Click to expand...
Click to collapse
can i flash repartition stock zip by eaxir via twrp ? please answer
I dirty flashed a new version of xiaomi.eu stable build, and it caused TWRP to uninstall itself.
Whenever I hold power on and volume up it just goes to fastboot.
Now I tried reinstalling TWRP like I've done many times before, but it keeps throwing an error. The error I get is when trying to boot without flashing the img. When I do this, I get the error:
Code:
fastboot boot TWRP.img"
downloading 'boot.img'...
OKAY [ 1.609s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.675s
Anyone gotten any ideas on what could be going on here? I'm scared to try anything as my phone currently works, but I need TWRP back to update my phone to a different versions and to install the clock mod again.
Thanks!
Got it to load once, but now back to square one. Throwing same error.
Now when running the command fastboot reboot recovery it's saying
Code:
fastboot: usage: unknown reboot target recovery
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.
Try on a computer with a USB 2.0 port, or a different usb cable, had the same issue once
Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.
I have the same error. How can I fix this pls?
MrkoZino said:
I have the same error. How can I fix this pls?
Click to expand...
Click to collapse
Flash the latest official rom then start all over again. Follow the post above you about miflash.
Hello, I've had the same problem, then flashed latest dev rom via MiFlash and it booted, but now after I flash any custom ROM in TWRP i have this issue again and need to reflash chinese ROM. How can I flash any custom rom?
i'm stuck in the same issue. stuck in fastboot and it would not load recovery. any fix?
Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
greendra8 said:
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.
Click to expand...
Click to collapse
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?
DJPlaya said:
Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?
Click to expand...
Click to collapse
long time ago now. but i remember at one point having to flash the stock firmware using the mi unlock tool. i also remember trying every single version of twrp and rom until one finally worked. sorry i can't help much but i believe that's how i eventually fixed it.
hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp
Marihot said:
hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp
Click to expand...
Click to collapse
Where do you get these .img files?
iconoclasthero said:
Where do you get these .img files?
Click to expand...
Click to collapse
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder
Marihot said:
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder
Click to expand...
Click to collapse
Please tell the details for this method
greendra8 said:
Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.
Click to expand...
Click to collapse
BROOOOOOOOOO HAHAHAHAHAHA I LITERALLY JUST READ YOUR COMMENT AND 10 SECONDS LATER I FLASH THE ROM WITH "CLEAN ALL AND LOCK" Im a f-king dumb bro
Marihot said:
你好，我也经历过同样的事情。
这个方法帮助我摆脱它。
尝试使用 adb 从要在 hh 中安装的 rom 中重新刷新一些文件映像。
将下面的文件从 rom 映像复制到 adb 文件夹
1.system.img（adb >> fastboot flash system system.img中的命令）
2. boot.img（adb 中的命令，如#1，更改 img 文件的名称）直到 #6
3. 供应商.img
4.dtbo.img
5. 自定义.img
6. 杂项.img
7. 现在用adb刷twrp/recovery.img（选择twrp与你要安装的rom兼容）
8. adb 的“fastboot boot recovery.img”
9. twrp刷入rom
Click to expand...
Click to collapse
Thank you, brother
try fastboot set_active a
or fastboot set_active b
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Try another recovery and if it failed try full flash latest stable rom
Well, I have been warning so many times that use any TWRP in MI9:
1. format data partition
2. reboot TWRP and then enter twrp. Make twrp mount data partition
3. wipe everything BUT please keep system partition only
4. reboot twrp and then enter twrp again
5. Now wipe system partition and then flash any rom you want
6. reboot
How to save your phone now ? Please try fastboot ROM and use miflash app to save your phone !
Kris
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Some questions here:
1. Is Redmi K20 CN the same as Mi9T?
If yes, that twrp is correct and the best one
2.After flashing twrp, can you enter twrp by general
method : power + volume up to enter twrp?
If yes, I think the problem is coming from your data
partition. Please format your data partition first and
then reboot to Twrp again. Then copy your rom in your
phone and then wipe cache/ dalvik cache/system. Next
to flash rom. Always Remeber not to reboot your
phone if you haven't flashed rom under twrp after
flashing system partition.
Kris
Ardysan said:
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Click to expand...
Click to collapse
Thank you Kris!
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Failykun said:
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Click to expand...
Click to collapse
This is what I had to do both times this happened.
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
RebornCheiko said:
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
Click to expand...
Click to collapse
As i understand, you wiped system and then restarted? And now you can enter only fastboot?
When you wipe system you must flash a ROM without restart or after restart, only fastboot available. TWRP version has nothing to do with this.
Now you must use mi flash or adb and fastboot utility. Download fastboot version of ROM, then open archive and flash it using mi flash or flash_all.bat script. flash_all_lock.bat will also lock your bootloader and mi flash has that option too, so check twice what option you choose
After flashing ROM you can flash TWRP again and it will be available, because by flashing ROM you restored system
I had the same problem.
Try to flash vbmeta.img via fastboot (fastboot --disable-verity flash vbmeta vbmeta.img) and then flash recovery then boot recovery.
Or try to flash boot.img (fastboot flash boot boot.img) then flash recovery.
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
I got you chief. Make sure you have adb and fastboot installed.
No you don't need Mi flash tool for this. All you need is a computer.
Go to fastboot mode, plug in your device and expand cepheus.tgz file you downloaded. Link below
https://xiaomifirmwareupdater.com/
Now open the folder. You have the flash_all files in there. Any .bat file is for Windows only. Any .sh files are for Mac and Linux.
Make sure the device is recognized in fastboot via cmd or terminal
WINDOWS ONLY: Open Command prompt and drag flash_all.bat into the cmd window and press enter
MAC/LINUX: Open terminal and drag flash_all.sh into the terminal window and press enter.
This part requires some patience. Wait until everything is finished.
Reboot using power button and it should be back to normal.
Hello everyone!
I have a huge problem with my Mi9 and I need your help.
I tried to install magisk, but once I flashed it any version of magisk (19.3, 20 etc...) the phone was rebooting in recovery mod insted of rebooting normaly. I have the version 10.2.30 PFAEUXM.
I've downloaded this ROM (zip) and extracted it. I then flashed the boot.img file thanks to the command "fastboot flash boot boot.img" but the phone stay stuck in fastboot mod and can't restart anymore!
I tried to re-flash the entire ROM via "fastboot flash system ROM.zip" but it didn't work. I also tried to flash TWRP-3.3.1-0601 via command "fastboot flash recovery TWRP-3.3.1-0601.7z".
I hope you guys will be able to help me...
Thanks in advance and have a good day.
tom1909 said:
"fastboot flash system ROM.zip" "fastboot flash recovery TWRP-3.3.1-0601.7z"
Click to expand...
Click to collapse
О_о
Seeing this i must ask you how flashed magisk? fastboot flash boot magisk.tgz ?)))) And how you even managed to boot to recovery?
g_seva said:
О_о
Seeing this i must ask how flashed magisk? fastboot flash boot magisk.tgz ?)))) And how you even managed to boot to recovery?
Click to expand...
Click to collapse
First, thanks for your answer
I tried to flash magisk.zip by TWRP
I tried to reboot in recovery mod by "vol+" + "power" and "adb reboot bootlaoder, but it doesn't work, it is written "error: no devices/emulators found"
"fastboot reboot" reboot my device in fastboot mod. But when i try "adb devices" it's written "List of devices attached"
tom1909 said:
First, thanks for your answer
I tried to flash magisk.zip by TWRP
I tried to reboot in recovery mod by "vol+" + "power" and "adb reboot bootlaoder, but it doesn't work, it is written "error: no devices/emulators found"
"fastboot reboot" reboot my device in fastboot mod. But when i try "adb devices" it's written "List of devices attached"
Click to expand...
Click to collapse
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
g_seva said:
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
Click to expand...
Click to collapse
Unfortunately, I tried to install TWRP-3.3.1-42-cepheus-mauronofrio.img. too but it doesn't work. My phone reboot in fastboot mod. :crying:
I found a fastboot rom but in 10.2.22 not in 10.2.30. I'm going to try with this, and update the rom after.
I'll tell you back soon. Thanks for all.
tom1909 said:
Unfortunately, I tried to install TWRP-3.3.1-42-cepheus-mauronofrio.img. too but it doesn't work. My phone reboot in fastboot mod. :crying:
I found a fastboot rom but in 10.2.22 not in 10.2.30. I'm going to try with this, and update the rom after.
I'll tell you back soon. Thanks for all.
Click to expand...
Click to collapse
Have you wiped system?
g_seva said:
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
Click to expand...
Click to collapse
I'm sorry, but I finaly didn't find a link to download the fastboot rom. I only find recovery rom .zip. Can you help me and send me a link pleeease.
tom1909 said:
I'm sorry, but I finaly didn't find a link to download the fastboot rom. I only find recovery rom .zip. Can you help me and send me a link pleeease.
Click to expand...
Click to collapse
Download Mi Flash tool pro: https://jumpmobile.ru/download/miflashpro-3-3-1212-88/?wpdmdl=286&refresh=5da2215f6f9e21570906463
Enter with your account choose "ROM packages", search for your device, and choose one of available fastboot ROMs, tap on copy and paste the download link in browser or download manager.
g_seva said:
Have you wiped system?
Click to expand...
Click to collapse
Yes, when my phone rebooted in recovery I tried to wipe system and reflash the rom. It worked but when I reinstalled magisk the bug came back
tom1909 said:
Yes, when my phone rebooted in recovery I tried to wipe system and reflash the rom. It worked but when I reinstalled magisk the bug came back
Click to expand...
Click to collapse
You sure that you reinstalled ROM after wiping system? Because if you just wiped system and flashed magisk that's the problem You must flash a ROM after wiping system without reboot or you will stuck in fastboot after reboot And there is no need in system wipe, don't touch it
g_seva said:
Download Mi Flash tool pro: https://jumpmobile.ru/download/miflashpro-3-3-1212-88/?wpdmdl=286&refresh=5da2215f6f9e21570906463
Enter with your account choose "ROM packages", search for your device, and choose one of available fastboot ROMs, tap on copy and paste the download link in browser or download manager.
Click to expand...
Click to collapse
I tried to flash the fastboot rom 10.2.15 by Miflash and it works ! I upraged this just after :fingers-crossed:
Yes, I remote system just before flash a rom but maybe I forgot.
My problem is solve ! Thanks for all (sorry for my bad english, I'm french)
How can I get my topic "Solved" ?
Cordialy
tom1909 said:
I tried to flash the fastboot rom 10.2.15 by Miflash and it works ! I upraged this just after :fingers-crossed:
Yes, I remote system just before flash a rom but maybe I forgot.
My problem is solve ! Thanks for all (sorry for my bad english, I'm french)
How can I get my topic "Solved" ?
Cordialy
Click to expand...
Click to collapse
Just add to the thread name [SOLVED]. Edit first post and then you can edit thread name.
Greetings from Israel.
This is maximum stupid. I need the xiaomi flash tool to repair it and the tool wants to verify my telephone number by sending me a code by SMS...
BUT no free space, can't transfert a rom to install, whatt can i do? i did all things in TWRP. Plz NEED A ROM :crying::crying::crying::crying::crying::crying::crying::crying:
what did u do? why r u stuck in fastboot? tell us the reason m8
Srormer89 said:
BUT no free space, can't transfert a rom to install, whatt can i do? i did all things in TWRP. Plz NEED A ROM :crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Restore the phone with an official MIUI fastboot ROM.
https://c.mi.com/oc/miuidownload/detail?guide=2
If viewing the page on a mobile, you'll need to change the browser to desktop mode.
In step 5 change the flash option, at the bottom of the Mi Flash Tool, to 'clean all'
Afterwards you'll be able to try and install the ROM you want.
A. Download
1. vbmeta. Img for your device.
2. Twrp
3. Fastboot for desktop
B. Then Flash it with fastboot.
How?
Note: Copy the vbmeta.img to the fastboot folder.
1. At the folder of the downloaded fastboot,
Hold shift and right click of your computer keyboard.
Click open power shell window.
2. Type
Fastboot flash vbmeta vbmeta.img
Fastboot flash recovery twrp.img
Fastboot boot recovery.img
Hope it helps