Related
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
cfw950116 said:
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
Click to expand...
Click to collapse
I was in the same situation. Mi recovery without adb and
and fastboot only. I'm on the phone and can't post links but if you go to the repartitioning thread and find my posts(there are not many)read it through and you will find a link to "how to fastboot" thread. If your computer recognizes your phone in fastboot mode than you'll be fine. Download from the same thread repartitioning to stock from the HTC mania guy if you want to flash miui with miflash. Otherwise it won't work. Good luck.
ashish289 said:
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
Click to expand...
Click to collapse
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
gauravsaini964 said:
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
Click to expand...
Click to collapse
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
ashish289 said:
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
Click to expand...
Click to collapse
can i flash repartition stock zip by eaxir via twrp ? please answer
Can anyone tell me what this (remote: Flashing is not allowed in Lock State).
What exactly is locked? Is my cell OEM unlocked?
I flashed the wrong TWRP (for the 2017 Red Magic-NX209J) and even though I have been able to unlock my cell via CMD commands; it remains permanently in fastboot mode?
If I send a CMD command to reboot it reboots straight back to fastboot mode.
No form of ADB connect seems to work an my windows PC cannot see/show the cell?
How the hell do I fix this? It's been in this state for a week.
Can anyone help?
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
xronaldx said:
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
Click to expand...
Click to collapse
Thanks for the suggestion. I have no recovery back up Is it possible to get past TWRP being locked and use CMD to flash the International or chinese ROM? Or recovery image?
Unless tools are developed to unbrick this device I am scared this problem might be permanent
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Secretcow said:
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Click to expand...
Click to collapse
Thanks but what do i do with it? Its all in an asain language?
Link not open bro
The TWRP does not work
Sorry. That link to the twrp does not result in a bootable twrp recovery for me.
I am starting to think my cell is not fixable.
I did not do that much wrong I just flashed the twrp for 2 models of red magic earlier. It only has a fastboot mode. I either get a boot screen then fastboot mode or a warning about the bootloader being unlocked.
Whatever is wrong with my cell prevents ADB connect an the cell is not able to be seen by windows.
This $1100 New Zealand dollar cellphone may be permanently bricked by my mistake.
I might just need to bin it an buy another one.
Lesson learned.
It confusing....
My cell acts like it has a softbrick (can turn off an on an has fastboot options and I have erased it an OEm an bootloader unlocked it)
And also behaves like a hard brick (resists every method of repair).
I just do not understand it or Nubia products. I am unfamiliar with this phone.
Does anyone have any clue how I can see this cell on my windows pc or ADB connect it an boot into TWRP?
Are there any Nubia repair software tools?
I already share nubia red magic 3 twrp check my all post
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Thanks for that. I'm talking about using CMD to totally wipe everything in the cell an reflash the Chinese ROM that came with it. Repair software. Might take months to develop software like that.
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Also it isn't a zip. It's some other kind of file. And does not boot into TWRP on my unit
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Sent from my NX629J using Tapatalk
terrapin4 said:
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Click to expand...
Click to collapse
Terrapin. Absolutely nothing worked. I am the 3rd person who has had this issue I know of. 2 other xda members had the same issue. One with TWRP like me an the other got stuck in fastboot mode after trying g to flash an apk of Gapps? I think these cells do not like tinkering. But your advice enabled me to be OEM and bootloader unlocked. But always.....straight back to fastboot mode no matter what I flash? My red magic 3 device is currently at a service center with a technician trying to solve the problem. I have 3 repayments left on my Xiaomi Mi9 that has zero flashing issues. O admit i.may be ignorant of the ways of Nubia ?
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
emmegitony said:
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
Click to expand...
Click to collapse
Thank God. Maybe the Chinese service guy I'm paying will get on xda an try your idea. I'm being lazy saying that lol. Thanks very very much. I will show your post to the service guy who has my red magic 3 or try it myself.
There's no way your a junior member working all this out. I'm a junior member listed as a senior member who makes rookie flashing errors with Chinese cellphones lol.
I will share if I can implement your ideas successfully. Thanks buddy my missus really loved this phone I felt really bad when I incapacitated it.
Fingers crossed.....
I have no idea how did you managed to flash the system.img
C:\adb>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi
LE: After this error, somehow it manages to continue and flash all partitions of the system, but after above tutorial, the phone still reboots in fastboot mode and cannot access recovery
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
sakilxda said:
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
Click to expand...
Click to collapse
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Bryceicle1971 said:
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Click to expand...
Click to collapse
Hane you fixed the phone or not?
JerryYin said:
Hane you fixed the phone or not?
Click to expand...
Click to collapse
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Bryceicle1971 said:
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Click to expand...
Click to collapse
My suggestions is, download a full sd card update package, unlock the bootloader temporarily,extract the update file and flash the vbmeta.img to vbmeta partion, then flash the recovery.img to recovery partition, after that, try to boot into recovery through bootloader. You have to make sure that you use all the same file from same package, if you are use a low version vbmeta file to boot a high version system (or recovery ) it will not boot. the vbmeta is very important on this phone.
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Try another recovery and if it failed try full flash latest stable rom
Well, I have been warning so many times that use any TWRP in MI9:
1. format data partition
2. reboot TWRP and then enter twrp. Make twrp mount data partition
3. wipe everything BUT please keep system partition only
4. reboot twrp and then enter twrp again
5. Now wipe system partition and then flash any rom you want
6. reboot
How to save your phone now ? Please try fastboot ROM and use miflash app to save your phone !
Kris
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Some questions here:
1. Is Redmi K20 CN the same as Mi9T?
If yes, that twrp is correct and the best one
2.After flashing twrp, can you enter twrp by general
method : power + volume up to enter twrp?
If yes, I think the problem is coming from your data
partition. Please format your data partition first and
then reboot to Twrp again. Then copy your rom in your
phone and then wipe cache/ dalvik cache/system. Next
to flash rom. Always Remeber not to reboot your
phone if you haven't flashed rom under twrp after
flashing system partition.
Kris
Ardysan said:
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Click to expand...
Click to collapse
Thank you Kris!
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Failykun said:
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Click to expand...
Click to collapse
This is what I had to do both times this happened.
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
RebornCheiko said:
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
Click to expand...
Click to collapse
As i understand, you wiped system and then restarted? And now you can enter only fastboot?
When you wipe system you must flash a ROM without restart or after restart, only fastboot available. TWRP version has nothing to do with this.
Now you must use mi flash or adb and fastboot utility. Download fastboot version of ROM, then open archive and flash it using mi flash or flash_all.bat script. flash_all_lock.bat will also lock your bootloader and mi flash has that option too, so check twice what option you choose
After flashing ROM you can flash TWRP again and it will be available, because by flashing ROM you restored system
I had the same problem.
Try to flash vbmeta.img via fastboot (fastboot --disable-verity flash vbmeta vbmeta.img) and then flash recovery then boot recovery.
Or try to flash boot.img (fastboot flash boot boot.img) then flash recovery.
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
I got you chief. Make sure you have adb and fastboot installed.
No you don't need Mi flash tool for this. All you need is a computer.
Go to fastboot mode, plug in your device and expand cepheus.tgz file you downloaded. Link below
https://xiaomifirmwareupdater.com/
Now open the folder. You have the flash_all files in there. Any .bat file is for Windows only. Any .sh files are for Mac and Linux.
Make sure the device is recognized in fastboot via cmd or terminal
WINDOWS ONLY: Open Command prompt and drag flash_all.bat into the cmd window and press enter
MAC/LINUX: Open terminal and drag flash_all.sh into the terminal window and press enter.
This part requires some patience. Wait until everything is finished.
Reboot using power button and it should be back to normal.
Hello everyone!
I have a huge problem with my Mi9 and I need your help.
I tried to install magisk, but once I flashed it any version of magisk (19.3, 20 etc...) the phone was rebooting in recovery mod insted of rebooting normaly. I have the version 10.2.30 PFAEUXM.
I've downloaded this ROM (zip) and extracted it. I then flashed the boot.img file thanks to the command "fastboot flash boot boot.img" but the phone stay stuck in fastboot mod and can't restart anymore!
I tried to re-flash the entire ROM via "fastboot flash system ROM.zip" but it didn't work. I also tried to flash TWRP-3.3.1-0601 via command "fastboot flash recovery TWRP-3.3.1-0601.7z".
I hope you guys will be able to help me...
Thanks in advance and have a good day.
tom1909 said:
"fastboot flash system ROM.zip" "fastboot flash recovery TWRP-3.3.1-0601.7z"
Click to expand...
Click to collapse
О_о
Seeing this i must ask you how flashed magisk? fastboot flash boot magisk.tgz ?)))) And how you even managed to boot to recovery?
g_seva said:
О_о
Seeing this i must ask how flashed magisk? fastboot flash boot magisk.tgz ?)))) And how you even managed to boot to recovery?
Click to expand...
Click to collapse
First, thanks for your answer
I tried to flash magisk.zip by TWRP
I tried to reboot in recovery mod by "vol+" + "power" and "adb reboot bootlaoder, but it doesn't work, it is written "error: no devices/emulators found"
"fastboot reboot" reboot my device in fastboot mod. But when i try "adb devices" it's written "List of devices attached"
tom1909 said:
First, thanks for your answer
I tried to flash magisk.zip by TWRP
I tried to reboot in recovery mod by "vol+" + "power" and "adb reboot bootlaoder, but it doesn't work, it is written "error: no devices/emulators found"
"fastboot reboot" reboot my device in fastboot mod. But when i try "adb devices" it's written "List of devices attached"
Click to expand...
Click to collapse
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
g_seva said:
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
Click to expand...
Click to collapse
Unfortunately, I tried to install TWRP-3.3.1-42-cepheus-mauronofrio.img. too but it doesn't work. My phone reboot in fastboot mod. :crying:
I found a fastboot rom but in 10.2.22 not in 10.2.30. I'm going to try with this, and update the rom after.
I'll tell you back soon. Thanks for all.
tom1909 said:
Unfortunately, I tried to install TWRP-3.3.1-42-cepheus-mauronofrio.img. too but it doesn't work. My phone reboot in fastboot mod. :crying:
I found a fastboot rom but in 10.2.22 not in 10.2.30. I'm going to try with this, and update the rom after.
I'll tell you back soon. Thanks for all.
Click to expand...
Click to collapse
Have you wiped system?
g_seva said:
By fastboot flash recovery TWRP-3.3.1-0601.7z you flashed twrp in archive i didn't know it even possible You must extract the archive and in archive must be file "twrp name".img or recovery.img. Then you can flash TWRP with fastboot flash recovery recovery.img or for example fastboot flash recovery twrp-3.3.1-42-cepheus-mauronofrio.img.
If after this you will manage to boot into twrp, you can flash a ROM in TWRP using install option. I don't know what you did before so before flashing ROM wipe cache/dalvik cache and format data all this in TWRP. After flashing ROM you can flash magisk, same as ROM.
If you can't enter TWRP, you must download fastboot ROM, extract it and flash it via Mi flash. Don't use flash all and lock or you will lock your bootloder.
Click to expand...
Click to collapse
I'm sorry, but I finaly didn't find a link to download the fastboot rom. I only find recovery rom .zip. Can you help me and send me a link pleeease.
tom1909 said:
I'm sorry, but I finaly didn't find a link to download the fastboot rom. I only find recovery rom .zip. Can you help me and send me a link pleeease.
Click to expand...
Click to collapse
Download Mi Flash tool pro: https://jumpmobile.ru/download/miflashpro-3-3-1212-88/?wpdmdl=286&refresh=5da2215f6f9e21570906463
Enter with your account choose "ROM packages", search for your device, and choose one of available fastboot ROMs, tap on copy and paste the download link in browser or download manager.
g_seva said:
Have you wiped system?
Click to expand...
Click to collapse
Yes, when my phone rebooted in recovery I tried to wipe system and reflash the rom. It worked but when I reinstalled magisk the bug came back
tom1909 said:
Yes, when my phone rebooted in recovery I tried to wipe system and reflash the rom. It worked but when I reinstalled magisk the bug came back
Click to expand...
Click to collapse
You sure that you reinstalled ROM after wiping system? Because if you just wiped system and flashed magisk that's the problem You must flash a ROM after wiping system without reboot or you will stuck in fastboot after reboot And there is no need in system wipe, don't touch it
g_seva said:
Download Mi Flash tool pro: https://jumpmobile.ru/download/miflashpro-3-3-1212-88/?wpdmdl=286&refresh=5da2215f6f9e21570906463
Enter with your account choose "ROM packages", search for your device, and choose one of available fastboot ROMs, tap on copy and paste the download link in browser or download manager.
Click to expand...
Click to collapse
I tried to flash the fastboot rom 10.2.15 by Miflash and it works ! I upraged this just after :fingers-crossed:
Yes, I remote system just before flash a rom but maybe I forgot.
My problem is solve ! Thanks for all (sorry for my bad english, I'm french)
How can I get my topic "Solved" ?
Cordialy
tom1909 said:
I tried to flash the fastboot rom 10.2.15 by Miflash and it works ! I upraged this just after :fingers-crossed:
Yes, I remote system just before flash a rom but maybe I forgot.
My problem is solve ! Thanks for all (sorry for my bad english, I'm french)
How can I get my topic "Solved" ?
Cordialy
Click to expand...
Click to collapse
Just add to the thread name [SOLVED]. Edit first post and then you can edit thread name.
Greetings from Israel.
This is maximum stupid. I need the xiaomi flash tool to repair it and the tool wants to verify my telephone number by sending me a code by SMS...
Fix for "The system has been destroyed" Redmi note 8/8T
This will only work for unlocked bootloader...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
Method 1:
1. Install the .exe from here (PC installation).
2. Download Vbmeta and copy to the installed folder.
3. Connect the phone with PC in Fastboot mode.
4. Run "cmd-here.exe" from the installed folder.
5. Run this command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6. Download and Flash recovery using this command fastboot flash recovery recovery.img and Boot to recovery (Vol+ and Power).
7. Flash recovery.zip again in Booted recovery.
If this doesnt work try with the next method
Method 2
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked but wipe everything
2. save user data: will save your data if any and bootloader unlock
3. clean all and lock: wipe everything and will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
5. Internet to download files
enweazudaniel said:
For unlocked bootloader only...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
SIMPLE SOLUTION:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
Click to expand...
Click to collapse
To be fair you dont even need the flash tool having the fastboot rom. Which is really nice if you are not running Windows. Just extract the fastboot package and run the script you need from the folder ( *.sh for mac and linux, bat for windows).
Worked like a charm and fixed my destryoed system.
Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Sent from my Redmi Note 8 using Tapatalk
DailyRoutine said:
Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Click to expand...
Click to collapse
This didn't work for me
Itemt said:
This didn't work for me
Click to expand...
Click to collapse
Maybe you put the wrong command?
It did work for me. Destroyed after flashing custom rom, flash vbmeta, back to normal.
Sent from my Redmi Note 8 using Tapatalk
Itemt said:
This didn't work for me
Click to expand...
Click to collapse
enweazudaniel said:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
Click to expand...
Click to collapse
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
thanks @the_weird_aquarian, will try it next time if i face this again!
have a good day
Worked
the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Wow Thanks a lot. Xiaomi ADBFastbootTool was not working on my systems had tried everything. But thanks to you I was able to boot into recovery within minutes :good:
geekyhellboy said:
Wow Thanks a lot. Xiaomi ADBFastbootTool was not working on my systems had tried everything. But thanks to you I was able to boot into recovery within minutes :good:
Click to expand...
Click to collapse
Happy to help
I wanted to thank you very much because your advice saved my phone
:highfive: :good:
enweazudaniel said:
For unlocked bootloader only...this guide will help you recover from the System has been destroyed when trying to install custom rom or recovery or maybe some other actions!
SIMPLE SOLUTION:
If you can enter fastboot screen download stock miui fastboot rom its like 3gb+. and miflash tools and flash remember in miflash tool at the bottom check the
1. clean all: this will still keep bootloader unlocked
2. save user data: will save your data if any
3. clean all and lock: will lock bootloader again
NEEDS:
1. A PC and A USB cord for your device
2. MIUI fastboot rom
3. Miflash tools
4. Xiaomi driver and ADB
Click to expand...
Click to collapse
Phone not detecting in mi flash tool what should I do now
---------- Post added at 07:49 AM ---------- Previous post was at 07:48 AM ----------
DailyRoutine said:
Or you can flash vbmeta.img (which is just 4 KB) using fastboot mode. Without downloading the entire MIUI fastboot rom (1GB+)
Sent from my Redmi Note 8 using Tapatalk
Click to expand...
Click to collapse
Give vbmeta link or attached file
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
Itemt said:
This didn't work for me
Click to expand...
Click to collapse
Update drivers and try again
Even with the drivers, my phone is no longer recognized on the pc with fastboot, when sending the command, Wait devices...
mudinhu said:
Even with the drivers, my phone is no longer recognized on the pc with fastboot, when sending the command, Wait devices...
Click to expand...
Click to collapse
try this, in mi flashing tool, first send command then connect device
Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.
the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Can you give more details about the last step i am trying to go into recovery and cant
the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
Yup, this method saved me from a bootloop!!!
RoxtarKaran.RK said:
Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.
Click to expand...
Click to collapse
I saw your video, followed link to your zip file. Nothing to download but wave browser and other junk. Lots of thank u comments but no file.
RoxtarKaran.RK said:
Very Simple to Fix, Just watch my Video on YouTube "Tech Karan"[YT Channel] or Search System has been Destroyed for Redmi Note 8, You'll get Video there.
Hope it helps.
Click to expand...
Click to collapse
I found your video and the links are to malware and there are 100 nearly identical videos with the same people thanking different presenters. That is very suspicious sir.
I havew a redmi note 8 global
System has been destroyed after trying to update magisk on Lineage OS
I am unable to boot into "FASTBOOT"
Is there a solution "fix" for that?
I had this happen once before and was able to boot into "fastboot" and fix the problem but this time the only thing I get is "System Has Been Destroyed"
the_weird_aquarian said:
honestly flashing full fastboot rom isn't required...
Download latest adb and fastboot package
now copy the vbmeta.img file from the fastboot rom into the platform tools folder...open command prompt in this path...connect your device in fastboot mode and flash vbmeta using following command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after that flash recovery.img.
Click to expand...
Click to collapse
unknown option --disable-verity. Can u help me?