Database Develop

[Q] Problems with Odin, phone bricked?? Need help.

OK here we go, I'm no idiot, I've been flashing phones etc for a good couple of years, consider myself excellent as a computer user, was a repair technician.
With that out the way;
I downloaded a 4.2 BETA for my Galaxy s3 mini, used Odin to try and flash it and received "<ID:0/008> Complete(Write) operation failed." first time, no other errors.
Phone has usb debugging enabled.
Do I tried again, same thing. Then tried once more, and received;
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
Now as far as I know, one should only get this error when a re-partition has gone wrong. I did NOT check the re-partition option.
So having a read around, I saw someone had posted a .pit file for my phone, so went to use this, and now this is my error;
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Could anyone help at all?
MY log, as far back as it shows;
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008>
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007>
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008>
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUFME7_I9300OXAFME7_I9300XXUFME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Oh and trying to start the phone normally, mostly just hangs at the Samsung logo, though when trying a hard reset, it would hang at a spinning "wheel", which in itself was stuck.
Many thanks

OK, update, flashed stock FW back, worked fine, now phone is just stuck at the Samsung logo. Can't get into recovery. The hell is going on?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190NXXAMB1_I8190NEVRAMB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.img
<ID:0/009> NAND Write Start!!
<ID:0/009> modem.bin
<ID:0/009> STE_boot1.img
<ID:0/009> STE_boot2.img
<ID:0/009> system.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!

hevydani said:
OK, update, flashed stock FW back, worked fine, now phone is just stuck at the Samsung logo. The hell is going on?
Click to expand...
Click to collapse
Boot into stock recovery and wipe data, note that you will lose all your files (are your files on internal storage or extsdcard, if the latter you should be safe.
Sent from my SGH-I747 using Tapatalk 2

rani9990 said:
Boot into stock recovery and wipe data, note that you will lose all your files (are your files on internal storage or extsdcard, if the latter you should be safe.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I can't even get into recovery mode.
Thanks for the reply

hevydani said:
I can't even get into recovery mode.
Thanks for the reply
Click to expand...
Click to collapse
Try this PARAM or I8190N PIT file I presume you're phone is NFC version. Find them here:
http://forum.xda-developers.com/showthread.php?t=2159660 use the PARAM as PDA in Odin first.
Sent from my GT-I8190 using Tapatalk 2

kicker63 said:
Try this PARAM or I8190N PIT file I presume you're phone is NFC version. Find them here:
http://forum.xda-developers.com/showthread.php?t=2159660 use the PARAM as PDA in Odin first.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Jesus christ you just saved my ass!
I literally love you, thanks so much.

CWM-Recovery installing problem on i9295

Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise

what Rom are you on?
nixon.itai said:
Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise
Click to expand...
Click to collapse
What rom are u using ? resurection - carbon - aopk - aosp ? or even stock? ... android 4.2.2 , 4.4.2 etc.... ?

nixon.itai said:
Trying to root my galaxy s4 active I had the following problem :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
i also tried to use a pit that i found here
with no luck:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please advise
Click to expand...
Click to collapse
Recovery does not care about the crappy PIT partition as it does not care about which ROM you're in!!!!
Try to close kies from the task manager,
if not helped simply turn off your WiFi or apply flight mode!
SIMPLE!!!

Jhon998 said:
Recovery does not care about the crappy PIT partition as it does not care about which ROM you're in!!!!
Try to close kies from the task manager,
if not helped simply turn off your WiFi or apply flight mode!
SIMPLE!!!
Click to expand...
Click to collapse
i have the same problem

You can flash CWM from http://forum.xda-developers.com/showthread.php?t=2752469 and flash http://download.chainfire.eu/446/SuperSU from recovery .. you shoud then have root

I have a problem with odin ?! help !

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070JVBMD1_I9070OJVBMD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> hidden.img.md5
<ID:0/009> __XmitData_Read ..
<ID:0/009> XmitData Fail..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that's what i got when i'm trying to flash stock jb 4.1.2 :/
it's not the first time that i flash stock jb
edit: solved by flashing custom recovery by odin then reflash stock GB

Phone doesn't turn on.

Hello.
Recently my phone got stuck so i decided to reboot it, after reboot theres just a logo screen.
Recovery mode doesnt work.
Charging works (but after yesterday's manipulations charging logo is turning on but seem to be stuck either (though i guess its working just not animated anymore)).
Download mode works.
My OS was Cyanogen (i dont remember version).
I am kinda newbie but i ve read some stuff on the intenet and tried to solve the problem with Odin. I used N7000XXLSZ_N7000OXELS7_N7000XXLSO_FACTORY_SER with Odin versions: 1.83, 1.85 and 1.87 with
boxes checked PDA, PHONE, CSS.
1. Odin 1.85 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
2. Odin 1.83 is getting stuck on "zImage".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
3. Odin 1.87 is getting stuck on "NAND Write Start".
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLSO_REV_05_CL1240075.tar.md5 is valid.
<OSM> CSC_OXE_N7000OXELS7_975051_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
I ve tried about 5+ times with each version.
You are my last hope fellas

Try just flashing an Odin version of philZ kernel. Also try another laptop with freshly installed samsung USB drivers.

Flash PhilZ kernel from Odin 3.07. After this, you'll have working PhilZ Touch Recovery

Try flashing philz cwm as they said or try flashing a stock ROM from sammobile.com .. And only use PDA and untick auto reboot ..

Flashing Stock Firmware Isn't Working

I have a note 5 SM-N920C and it's rooted, I'm trying to flash the stock firmware but it won't work for some reason.
For odin version 3.09 I get this, I left it on for a hour but still the same thing.
I used N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 for flashing
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!

mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1

Had the same issue while flashing auto-root via odin.
It just stays stuck at NAND write part.

Familiaaa said:
mhm,whats problem do you have exactly?,i cant see nothing in the log.
maybe you need the last odin version 3.11.1
Click to expand...
Click to collapse
The problem is that I can't install the stock firmware, it doesn't complete the installation for some reason. Also when I am in TWRP, it said that there isn't a OS installed and I have seen that I have to install stock firmware.
I did try odin 3.12.3 and it failed, then I tried odin 3.10.6, it failed but now it also stops at a certain point and won't complete the installation. I could try odin 3.11.1, thanks for response.
I just tried Odin 3.11.1, failed
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that I tried odin 3.10 and 3.10.5, stuck again but at setupconnection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920CXXU1AOH2_N920COJV1AOH2_N920CXXU1AOH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..

I think the problem is my stock firmware, I can't seem to find the stock for a SM-N920CZDAXSG. Help plz

It was the stock firmware, wrong version, I cry today.