Related
Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Try this to get CWM back on.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Try removing the battery and plugging the phone in to the PC.
Start SP Tools with CWM set in the scatter and only recovery ticked
Press Download in SP tools and then insert the battery
CWM should download to phone
If that fails repeat but plug the phone in once you press Download, then insert the battery.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Omg..i have almost exactly the same problem and the solution that MrAAnderson suggested didn't work.Here's how i ended in this problem.I was running VIBEUI_V3.0_1602_7.407.1_DEV_K50-T5 ROM on TWRP recovery made By Pr1nc3V app Lenovo K3 Note Manager [v2.1].Since i had annoying bug with "R" (roaming icon) and "gapps stopped working" issue i wanted to re-flash same ROM.I entered into TWRP recowery,cleared dalvik+cache,rebooted into recovery again.Now i wanted to flash ROM,but it didn't flash it gave me an error,same thing happens if i try to flash stock recovery (i even tried naming ROM and recovery as "recovery.zip" and "update.zip").Rebooted the phone but i'm also stucked on welcome screen where i can't pass it because of "Unfortunately,WLAN stopped working".
Tried to flash ROM and stock recovery with SPFlashTool but the tool doesn't see phone at all,same as Lenovo K3 Note Manager by Pr1nc3V .Right now i'm running out of solutions for this mess i created,any advice will help.Help me please to restore my phone.
EDIT: i just realized that i actually made a "factory reset" in TWRP recovery..not just wipe data,cache and dalvik.....what are my options now folks?
Ok i'm happy to announce that i resolved my problem (after a panic mode on,lol).Here is what i did..
1. Obviously you have to get back on your stock (original,ugly chinese-english one) recovery (in case you already didn't..).To do that i used SP Flash tool.(i wouldn't go into details but if you need just ask).
After that we have following situation..stock recovery + dev ROM (which isn't working well).
2.If you try to flash any ROM in this state it will fail (based on my experience,i tried to flash exactly same ROM which is already installed..no way.).So now next step is to get a CUSTOM (TWRP or CM) recovery,again flashing it with SP Flash tools.
From this point you can choose wher would you go...STOCK rom ,MODDED one ...anything actually.I hope i clarified a bit.
sptools is not detecting my device
So I recently tried updating MIUI v5 to MIUI v6. However, I stupidly opted for the FOTA update, rather than updating using recovery.
After running the update, my phone rebooted and it worked fine, MIUI v6 running great. However, because I'd updated using the in-built updater, my data and apps were still there from before. This was causing no-end of 'process stopped running' alerts, which drove me crazy after around 10 minutes.
Therefore, I decided to try and wipe my data. I went to the recovery menu and found that MIUI had installed its own Chinese recovery, my previous TeamWin one was gone. So I fumbled around and managed to find the 'Wipe data' etc. option, and chose it. I was presented with a couple more options which I didn't understand, and (stupidly) accepted both. This left me with a phone that would no longer boot past the 'Sony' logo. I was also unable to access the Chinese recovery menu.
Feeling a little worried at this point, I started to Google around for guides on how to flash a recovery back onto a phone stuck in a boot loop. After hours of searching, I decided it wasn't possible and instead follow a guide for fixing 'boot loops' through flashing an original Sony 'ftf' firmware using flashtool.
Now, the guide I was following was quite old, and provided a link to 'C6903_14.2.A.0.290_Global LTE' - so this is what I used to flash (which I'm now regretting). Before flashing, I was presented with some options, for which the guide I was following recommended I deselect the 'kernel' option. So I did this too.
After around 10-15 minutes and what seemed like a successful flash, I tried turning the phone on. This time, the Sony logo appears, then disappears to a black screen, and then the backlight turns off, followed by the Sony logo, then a black screen, then backlight turning off, etc. So slightly different behaviour to before, but still boot looping.
I think what may have happened is that MIUI includes an updated kernel, and through flashing the 14.2.A.0.290 firmware without a kernel, I've introduced some sort of incompatibility.
The problem I'm having now is getting another firmware onto the phone in order to resolve this. For some reason, despite flashtool recognising the phone being plugged in with flash mode, it refuses to load the firmware - I'm instead presented with the message:
"You must have the according fsc script to flash this device."
Does anyone know how I might be able to get around this? I admit to being a bit of a noob when it comes to flashing so have probably dug my own hole here, and seem to have left myself completely unable to work out what I need to do in order to get back out! Any help would be hugely appreciated.
Please see the attached screenshot of what I see when I try flashing with flashtool. The whole flash takes around 2 seconds, so it appears as though nothing's actually happening. However, it did flash successfully before, only without the kernel (which I think is what's causing my problems).
Please help!
langauld said:
Please see the attached screenshot of what I see when I try flashing with flashtool. The whole flash takes around 2 seconds, so it appears as though nothing's actually happening. However, it did flash successfully before, only without the kernel (which I think is what's causing my problems).
Please help!
Click to expand...
Click to collapse
This version of Flashtool you're using is known to require some files for your device to be able to work.
Try using the version before it.
Oh and NEVER:
- Wipe /system and /data using recovery with unlocked bootloader (it will remove everything and the phone will not be able to boot).
- Flash an ftf of a older android version (like flashing kitkat on top of lollipop) without including kernel because that will cause a bootloop. (not sure about flashing lollipop on top of kitkat but I think it's the same)
Just2Cause said:
This version of Flashtool you're using is known to require some files for your device to be able to work.
Try using the version before it.
Oh and NEVER:
- Wipe /system and /data using recovery with unlocked bootloader (it will remove everything and the phone will not be able to boot).
- Flash an ftf of a older android version (like flashing kitkat on top of lollipop) without including kernel because that will cause a bootloop. (not sure about flashing lollipop on top of kitkat but I think it's the same)
Click to expand...
Click to collapse
You sir, are a god amongst men. I'd never have thought to try the previous version of FlashTool. From reading around, I knew some devices had issues with it, but because it lists the Z1 as being 'supported', I didn't think that would apply to me.
I flashed again without deselecting the kernel and it booted first time. Thank you again.
langauld said:
You sir, are a god amongst men. I'd never have thought to try the previous version of FlashTool. From reading around, I knew some devices had issues with it, but because it lists the Z1 as being 'supported', I didn't think that would apply to me.
I flashed again without deselecting the kernel and it booted first time. Thank you again.
Click to expand...
Click to collapse
Glad I could help.
Hi all,
I have a big problem with my phone.
I wanted to try out Resurrection Remix on my phone.
I installed twrp-3.0.2-0-dogo.img with fastboot.
After reboot i saw the Teamwin logo and then i did a full wipe of everything, except SD Card (like i always do when i install a custom rom)
Then i installed Resurrection Remix M v.5.7.3.zip from sd and gapps, then wiped cache and pressed reboot.
No error with flashing, when the phone booted and i saw some logo's, took like 2-3 minutes and then the phone went off and started to reboot and reboot, had to take the battery off to let it stop.
Since then my phone isn't working properly, i tried to flash different kinds of stock roms with flash tool including wipe options.
No errors with flashing, but the phone still doesn't boot or it goes off after Sony logo then i leave the battery out for 10 mins or so then it starts and it looks normal, i can install aps, i can call, but the first time when i reboot my phone with this new install it's back to rebooting. I tried to leave my battery out for 10 hours but it doesn't help.
I tried to relock my bootloader and then unlock it again.
If i tried to install twrp-3.0.2-0-dogo.img it's going to reboot also, i tried airless or evomix kernel, then recovery starts but when i try to install a custom rom zip, and try to flash it my phone reboots after 5 seconds.
And now i don't know what to do anymore, so please anyone? help?
Thanks in advance!
did you try installing stock rom with flashtool ?
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
falptekin said:
did you try installing stock rom with flashtool ?
Click to expand...
Click to collapse
Yes, i tried atleast :
C5503_10.1.1.A.1.310_GLOBAL-LTE.ftf
C5503_10.6.A.0.454_HK.ftf
C5503_10.7.A.0.228_TR.ftf
And used all wipe options.
I used Emma tool, after that i removed the battery from the phone for 48 hours, then it booted the second time. I charged the battery and i left it like this for a few hours, then i tried to reboot but it went off after 20 seconds, tried to boot again but it goes off after Sony logo.
Røbin said:
What was your android version when you first flash TWRP 3.0.2 recovery?If you are coming from stock lollipop then you should flash TWRP 3.0.2 (.228).Make sure you unlocked phone bootloader.Use advance clean in the recovery,select all except sd card and clean all.Then try flashing RR Rom again.Do wipe cache/Delvik after flashing RR Rom and before flashing GAPPS.
Click to expand...
Click to collapse
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Fuchsia said:
My version was CM 13 (cm-13.0-20160801-UNOFFICIAL-dogo.zip) that was working very well, but before i flashed RR i did advanced cleaning and i checked everything except SD Card and USB OTG and a factory reset and after flashing pressed wipe cache/dalvik and then i rebooted.
The phone is off now without battery. This Sony doesn't have recovery, buttons aren't working and they never did, i can only flash twrp with fastboot wich makes it only boot into recovery and then i used this to flash custom roms.
I only started to flash custom roms about a month ago because someone gave me this Sony ZR, i bought a new original battery for it but when i call on speaker there is some underwater bubbling sound and i also wanted marshmallow and i hoped this may fix the bubbling sound, with CM 13 the sound was already better but didn't fix it completely.
TWRP won't let me flash anything anymore, it's starting to flash but after 5 seconds it reboots back into recovery.
Edit: Is it possible that there is still stuff in the RAM that is causing problems?
Edit: I thought i'm going to this phone another try. I installed twrp-3.0.2-0-dogo.img and it boots, also this version didn't want to boot anymore but now it does. I wiped everything, also SD Card, i checked everything is empty. Before i couldn't wipe my SD Card anymore and in Windows all files showed double and i couldn't copy files. Going to charge it first and think about what i want try to flash. Wipe cache/dalvik and then flash gapps is a good idea.
Edit: it almost charged now, when it charged i will remove the battery again for the night, i will decide later what i'm going to do.
Click to expand...
Click to collapse
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Røbin said:
Someone maybe played with your phone in underwater to cause bubbling sound.I don't see any hardware problem in your phone.You maybe did something wrong or anything else that your phone behaving like this.Listen,You first flash a stock rom.Lollipop would be better because you can flash flashable twrp 3.0.2(.228) via flash fire or flashify app.I once tried flashing twrp img through fastboot and it caused bootloop.So I always use flashable zip.Fastboot for emergency.And try to reformatting your system pertition.I hope this will work or you'll need expert developer to help you.Maybe Daedroza can help you if my sugg. don't work.
Click to expand...
Click to collapse
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Fuchsia said:
The bubbling sound is a known issue with some Sony smartphones, on google i have read more stories about this problem, not only zr but also other Z models. The problem is caused by the second mic i think, if i use loudspeaker when calling and i lay the phone on the back the sound is much better. I saw on other thread about this, http://forum.xda-developers.com/xperia-zr/help/disable-mic-t3434997
On YouTube you can find many movies about this, for example https://www.youtube.com/watch?v=fC6JbuQJ_gg
It's really annoying for the other person to hear these sounds when you are calling. They need to listen very carefully to understand you, but it's only when you call on speaker.
When i wanted to flash a custom rom for the first time i wanted to do this with apps on my phone. I rooted my phone with kingroot and used an app to check if the phone was really rooted. I installed twrp app and tried to install recovery but it gave an error. I tried to install recovery with Flashify but then it says that the recovery partition is not present. When i try to flash with Flashify it says it's going to reboot into recovery but then the the phone boots like normal. The only way for me to get a recovery on the phone is just flashing with fastboot or using flashtool. Doomlord kernel and XZDualrecovery don't boot, only twrp is working.
Click to expand...
Click to collapse
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Røbin said:
First of all change the kingroot with supersu.Kingroot root access control not so stable.Download selinux mode changer to set in permissive mode.If you are at LP version,twrp app won't install recovery or support it.flash twrp3.0.2(.228) via flashify or different flashing app.selinux permissive mode will let you to go to recovery mode.By the way,xzdualrecovery is for locked bootloader and should boot without any problem.I don't know it will work on unlocked bootloader or not.So try your best what I have told and this is all I have to share from my own experience.
Click to expand...
Click to collapse
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Fuchsia said:
I flashed the latest Lollipop and it's back to rebooting, i see the sony logo and before it says powered by android it goes off. I removed the battery again, i will try to root the phone and use selinux mode changer when it's booting. It wil take atleast 12 hours without battery before it boots.
Click to expand...
Click to collapse
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Røbin said:
Is there any problem with your phone?Did you experiment your phone too much?I don't get it,why after flashing stock rom via flashtool gives you bootloops if no error showed up while flashing!!Is this your battery problem?And I think so because few months ago my phone battery heavily damaged and therefor It don't charge and my phone didn't bootup but bootlooping.I first thought it was my mistake to flash rom incorrectly.So i had to flash stock rom via flashtool to go back to normal but unfortunetly PC don't recoznige my phone not even fastboot.I was worried and couldn't do anything and went to service center,they changed the battery with new one and my phone comes to life again.Mainly this was for my local charger fault.it also damaged in that day too.SO brought a orginal sony charger.But you said you brought a new battery too then how come you face bootloops.well if there is no error message shows up I can't help you with anything.Only better expert member can help you.By the way you can collect log via adeb fastboot if your phone fastboot mod work.
Here is the inst:
1. Install the Android Debug Bridge using http://developer.android.com/tools/help/adb.html
2. Instructions on installing Android Debug Bridge are located here:
http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android- debug-bridge-utility
3. Run the following commands:
“adb logcat -c" (This clears the logs.)
4. Reproduce the issue.
5. Then, run the following command to capture the logs in a file:
“adb logcat -d > Name_of_Log_File.txt"
maybe it will gives some clues what is happening.
Click to expand...
Click to collapse
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Fuchsia said:
I tried my old battery and it boots, already booted up 3x times. I never thought it maybe the battery because it's only 2 months old. Thanks so much for your help.
I tried to install recovery with selinux permissive mode and flashify but i stil can't install recovery.
It says: Partition not found, your recovery partition couldn't be found. You won't be able to flash recovery images. You can stil flash zip files.
I don't think it's possible to have recovery on this phone, atleast not the normal way.
Edit: I flashed RR and it's working fine. I'm so happy it's working again, i never really used this old battery but i think it's not so bad at all. I only lost 8% battery with flashing and booting RR. I never really thought it was the battery because it was charging normal, i used it for 2 months or something without problems.
Click to expand...
Click to collapse
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Røbin said:
If it was a battery problem then change it or carefully use it.And the error you are facing is because the latest flashify has some bugs.But now as you are already using RR MM rom.You can download twrp app and use this app to install recovery.
Click to expand...
Click to collapse
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Fuchsia said:
I tried to install recovery, flashify hangs all the time, twrp app gives an error when i try to install recovery and flashfire says there is no partition for this image. I thought i'll do a factory reset in RR and when the phone rebooted i saw twrp. I tried with pressing the buttons when booting but no luck. I used reboot into recovery option and it worked. This is the first custom rom that gave my phone recovery.
I will throw the battery away and use the old battery, i can always buy a new one later.
Click to expand...
Click to collapse
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Røbin said:
OH!So that the old recovery occupied all the recovery partition space that you are unable to install twrp recovery.But old recovery should be replaced by new recovery,that's strange.well I don't know how did this happen but don't use fastboot to install recovery or anything else,It's for emergency.I'm not fully familiar with fastboot though,I tried once before and caused trouble. I hope your troubles are gone now.
Click to expand...
Click to collapse
My phone don't have any partition recovery, i tried 100x times with stock rom to boot recovery, with buttons, with apps that boot in recovery. I do have recovery with RR rom, but it's not in the recovery partition. I tried Tesla, CM 13, XOSP but still no recovery. I tried to boot recovery with all roms, but it doesn't matter. It's fine now, been playing a bit with RR and it's a nice rom. Thank you for helping.
Hi,
Today my device was lagging and I restart it. Just after that I get the bootloop (showing MI.com logo). I can't open the recovery menu using the Power + Vol+ combination, but at least I could load FASTBOOT using Power + Vol-.
Using terminal command "fastboot reboot recovery" also doesn't help. I can't turn off the device as well - after some time showing me the logo device reboots again.
History - I have flashed my device ~1.5 year ago using OrangeFox + MIUI 11 raphael. The reason why I did it was my stock firmware didn't allow me to use NFC, there just was no option to enable it. After flashing everything was fine until today. Btw, device is unlocked. I am not sure what ROM version did use exactly because pretty much time passed already.
I spent a day googling for a solution, but didn't find anything.
What can be the reason? Is there a way to fix it?
If you haven't tried it yet, I'd suggest you flash your latest backup (if any) or flash the stock ROM again.
@TrulyPain no, I dont have any backup unfortunately.
Regarding the flashing stock ROM
1. Before I used OrangeFox to flash the device but now I cant boot recovery mode. Is there a safe way to do so?
2. Does only stock ROM fit? No custom?
Tried so many different approaches today. None of custom recoveries worked. I tried to use stock recovery - same result.
The only thing I didn't try is Mi Flash Pro stock ROM flash, but before that I wish to be sure I tried everything else.
Also, the repair specialist told me (remotely, he didn't check the device) that potentially it can be the memory hardware problem and advised me to visit Xiaomi official repair service. But.. it's pretty complicated for me currently.
romahaaa said:
Does only stock ROM fit? No custom?
Click to expand...
Click to collapse
I would recommend starting with the stock ROM as you can then more easily see if it is a hardware-related problem or not. Also, it sets a suitable environment for any custom ROM installed afterward. This, as many custom ROMs, don't contain all partitions and need some partitions to be written by the stock ROM, e.g., the "OEM" partition.
After you have installed stock ROM - if everything works fine - you can install any custom ROM of your choice following the recommended instructions.
We tried 2 difference ways to flash to phone using stock ROM, but no luck. Seems the problem was in the motherboard. Left it for repair, but.. doesn't mater already, as everything has lost. After that case I move to iPhone back - there would never happens this **** with data lost in unexpected cases.
Thanks for the help