Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
Related
First of all, I have checked around quite a bit on this forum as well as others to try and avoid having to ask a question that's already been answered. Here's my problem/ what happened. I was rooted (one-click with locked bootloader) and had tried out several roms for a couple of months now. A few days ago I reverted back to an old stock 2.2 backup. My phone received two ota updates and I'm pretty sure I lost root. I had just went on using the phone for about two days when I ran into a problem today. After shutting the phone off I have now become "stuck" at the initial "X" screen (not animated). I pulled the battery and tried again several times. I then tried to reboot into recovery from the bootloader/ 3 skateboards screen with no luck. Any time I hit recovery it simply takes me back to my stuck "X" screen. I have an entire backup of my SD card from earlier as well as at least 4 nandroid backups (one of which was the stock 2.2 before the latest ota). I am thinking I need to somehow put clockwork recovery back on my phone so I can restore to one of my backups. I do not know how to do this. Sorry for the lengthy post but I want to provide as much information as possible. Any help at all would be greatly appreciated.
Just like you restore to stock 2.2. You should have used recovery.img. use adb fastboot to put the stock or anom recovery. I am not am expert but I have had the same problem few times. Always use adb commands
Sent from my Nexus One using Tapatalk
Does my n1 have to be in usb debugging mode because it's acting like it's not connected or something. I get the message "error: device not found." I'm on the fastboot screen on my n1 and using terminal on a mac. I usually didn't leave debugging mode on
No it doesn't but you have to have the drivers installed as well as the SDK with dependencies.
Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.
fastbook oem unlock
install Amon RA recovery
flash new rom.
Caseyp789 said:
Whew! Thank God! I ended up getting a FRG33 stock rom onto the sd card and the bootloader detected it. I'm not sure what happened but when I tried recovery after that it took me to the android with an "!" point (meaning no recovery?) and then back to the X. This time however it loaded on through and went right back to the way it was before it was stuck. Again, not sure what happened but thanks for the replies and help.
Click to expand...
Click to collapse
The exclamation mark is just the stock Android recovery - it was re-installed when you loaded the stock FRG33 ROM.
Performing OTA updates requires you to have the stock recovery installed. Simply reverting to a stock 2.2 nandroid isn't sufficient, so trying to install those OTAs (which should have failed without stock recovery) may have broken something there.
GldRush98 said:
fastbook oem unlock
install Amon RA recovery
flash new rom.
Click to expand...
Click to collapse
This is by far the easiest (and safest) way. Google/HTC provided us an easy and safe method for gaining full access to our phones.... Why so many people refuse to use it is beyond me. If you root it the proper way (with fastboot oem unlock), it will make recovery from any further issues a lot more simple.
From what I can tell, I am having the same symptoms as the topic creator. I believe the problems started during a failed flash of cyanogenmod 6, but I am not sure by what means the flashing took place.
I can't boot the phone normally, it hangs on the X splash screen and the same occurs when trying to enter recovery mode.
I have tried the passimg approach to fix this, it either doesn't recognize my zip or starts loading it and freezes on a loading bar.
Fastboot flashing recovery completes, but doesn't fix the issue.
I can fastboot flash every image partition except system or radio, both hang.
As danger rat and dude random both know, I have posted this problem on the nexus one forums but I thought I'd post here to have some more minds look at it.
Hi,
Full version as a note. Droid 1
Flashed clockworkmod recovery (2.5.0.1), went fine. Made a backup of stock rooted ROM, worked fine. Next flashed bugless beast .6, while clearing data & cache, no problem.
Now i want to flash to cm - trying out different ROMs - trying to reboot into recovery or flash another ROM both fail to get me to a bootloader. Instead i see the motorola boot logo for 30-45 seconds, followed by what looks like a regular boot (motorola M, then Droid eye, & booted.). I have also tried fixing permissions.
If anyone has any idea why this is happening or can direct me to a forum link it would be greatly appreciated. Sorry if this is in the wrong section, and yea I've tried looking through the forums for a while.
Thanks
just a little baby sized pump...
This happened to me too after working perfectly for several months. All of the sudden I just couldn't get to clockwork. I am running CM7 Nightlies. After not being able to fix the issue for several days I decided that a full wipe via the .sbf method was in order. I've got everything up and running again but it was an annoying process. Can anyone out there help us to understand why this happened so we don't have to deal with this again?
Do you have a link for the method you described about? That would be really helpful!
An ever so slightly larger bump
I really am not trying to be lazy, but all the .sbf methods I've read so far seem require you getting to a boot loader. If I could get to a boot loader this wouldn't be a problem, as I made a back up of my stock ROM. I have a functioning bugless beast ROM, just no recovery / boot loader, and no way to flash back to my recovery.
And possibly solved..
One: Please pardon my ignorance, doing these things on my Eris was far easier, or at least what I got used to.
Two: Please also ignore the word boot loader in my previous posts, as it was the recovery console that I could not get to load. Sorry Again.
Three: Its magically working. My methods were unscientific to say the least, but the Droid is now in "ClockworkMod's Recovery v2.5.0.1".
Things I finally did:
NOTE - I DO NOT BELIEVE ANY OF THIS TO BE THE PROPER ORDER OF THINGS. PLEASE VERIFY WITH SOMEONE FAR MORE INTELLIGENT THAN ME. THE FOLLOWING REFLECTS THE PROCESS I DID, AND SHOULD PROBABLY NOT BE FOLLOWED UNLESS A MOD ACTUALLY SAYS THIS WAS CORRECT
1. Pulled Battery, hold power button down for a few seconds, and then put back in
2. Hold Up on D-pad while holding the Power Button
3. You see the following
Code:
bootloader 2c.7c
battery ok
ok to program
connect usb
data cable
4. Connect USB data cable to PC running RSD Lite. You will also want a .sbf recovery file from a trusted source.
5. Select the .sbf in RSD Lite. Tell it to start. I used the clockwork recovery only .sbf
*** Where things got officially weird for me ***
6. The .sbf file I told it to load seemed to work, as the progress bar moved. The phone almost instantly rebooted, back to the ROM I was running minutes earlier. Clockwork had not been working previously trying to reboot into recovery, but almost instantly upon trying this time, I was in recovery mode.
NOTE - The USB cable was still plugged in as well. I don't know which combination of things actually got this to work, but it did.
Hope this helps someone else out.
i rooted my droid 3 and changed the battery icon and notification panel backround installed mavrom it was giving me lots of errors so i did a factory reset i think it failed now the phone starts but if i open any apps except the phone app or the stock messaging app the phone restarts and any apps i have are gone but the changes to the notification bar are still there i have tried every recovery method i can find and nothing can fix it can nayone help?
Did you do a wipe of data ?
Sent from my XT862 using Tapatalk
If u have tried everything u can think of the last step is .Sbf
Sent from my DROID3 using XDA App
Here is a link to a thread that will get you back to stock:
http://forum.xda-developers.com/showthread.php?t=1255198
Sent from my XT862 using XDA App
did a whipe and what was on the link dident fix it when i use rsd lite it gets to 3/18 and fails
What recovery are you using?
stock recovery cant get any other ones to work
Try this. Follow the directions in the OP. It'll take about 5 mins to get back to a box stock D3.
http://forum.xda-developers.com/showthread.php?t=1339816
went to the link downloaded it, flashed it everything went good then phone restarts and everything is back to stock except the things i changed with rom manager and still resets everytime my phone turns off
htimes said:
went to the link downloaded it, flashed it everything went good then phone restarts and everything is back to stock except the things i changed with rom manager and still resets everytime my phone turns off
Click to expand...
Click to collapse
Then ROM Manager is clearly the issue. That link gets you to box stock software. I'm not a fan of RM because I feel that unless 110% understood, it can cause way more headaches than it fixes. What do you use it for? What changes did you make after flashing to stock?
used rom manager to change battery icon 3g icon signal icon and the notification bar backround
I don't think that MavROM is compatible with Rom Manager tweaks. I believe that they only work with CM based ROMs. Try reflashing to stock, rerooting, and reROMing it. Don't make the changes and see if the issues persist.
i tried reflashing to stock like 10 times and it never fully goes back to stock
How about going to cwm through odin and deleting your catch data and your delv catch. I had the same issue when reverting back to stock ( it wasnt fully there) but when i erased all the data and delv catch it reverted to the stock rom properly. Just a thought
Sent from my GT-I5500M using xda premium
i cant get into cwm not sure how to do it
htimes said:
i cant get into cwm not sure how to do it
Click to expand...
Click to collapse
Well, the previous is strange, because I've used that to recover from all different causes of bricks and bootloops and reboots and etc. All took me back to box stock software...
Anyways, I would flash back to stock-ish with it, re-root, install CWM, boot into recovery, and then wipe /system /data /cache /dalvik cache.
Using X + Power then VOL Up + Down, you can get into stock recovery and wipe data and cache. This puzzles me though, because that quick SBF wipes data, system, and cache.
Just for my curiosity, what ISN'T stock after the quick unbrick method?
htimes said:
i tried reflashing to stock like 10 times and it never fully goes back to stock
Click to expand...
Click to collapse
Oops, bumped Thanks trying to quote this. When the DOS-looking window prompts you to press any key to exit, and I'm assuming you do, do you let the phone go through it's process where the yellow bar inches across the screen and completes the reset?
tried odin said it isent compatible with my device
htimes said:
tried odin said it isent compatible with my device
Click to expand...
Click to collapse
Odin is for samsung devices
Sent from my XT860 using xda premium
redsox985 said:
Well, the previous is strange, because I've used that to recover from all different causes of bricks and bootloops and reboots and etc. All took me back to box stock software...
Anyways, I would flash back to stock-ish with it, re-root, install CWM, boot into recovery, and then wipe /system /data /cache /dalvik cache.
Using X + Power then VOL Up + Down, you can get into stock recovery and wipe data and cache. This puzzles me though, because that quick SBF wipes data, system, and cache.
Just for my curiosity, what ISN'T stock after the quick unbrick method?
Oops, bumped Thanks trying to quote this. When the DOS-looking window prompts you to press any key to exit, and I'm assuming you do, do you let the phone go through it's process where the yellow bar inches across the screen and completes the reset?
Click to expand...
Click to collapse
the phone doesent go through the yellow bar process it just restarts to the first part of recovery menu all that is on my screen is the triangle and droid
htimes said:
the phone doesent go through the yellow bar process it just restarts to the first part of recovery menu all that is on my screen is the triangle and droid
Click to expand...
Click to collapse
Are you sure you have the latest drivers installed? Head over to that thread one more time, re-download the quick unbrick, boot up with M + Power, select AP Fastboot, open the shortcut for "CLICK HERE - Something something something", allow it to go through it's 20 or so lines of actions, and when it says to press any key to exit, do so. Now just let the phone sit there while still plugged in (IIRC, this is what I did last time). If this all fails to return you to stock settings... 1. I'll be surprised 2. I'll nand backup mine and make a video for you of quick unbricking mine and everything it does.
If it does work, please don't change things in ROM Manager, IIRC, those tweaks are only for CM based ROMs, and not Mav.
I apologize in advance if this same issue has been replied to elsewhere. I'm in kind of a unique situation and couldn't find an answer anywhere.
I'm got an N1 with 2.3.6 stock ROM, rooted. Recently I downloaded Titanium Backup PRO and while attempting to integrate dalvik cache to ROM, my phone rebooted into a bootloop. I'm assuming this is a bootloop. I get the colorful splash screen, it freezes for a second of two, then continues on, and on, and on....
Is there a way to get me out of this loopwithout having to wipe all my data, so I can backup all my stuff before I flash a custom ROM?
Everything I see about bootloops, mentions unlocking the bootloader and wiping all your data. I've seen downgrading using PASSIMG and loading stock rom. I'd really just like a simple way to get out of this loop hell and get my phone back up. It's in teh ship now getting it's power button fixed.
Thanks in advance
first thing i do on bootloops is pull battery
if no go pull battery and then pwr on by pressing pwr and trackball at same time--you can then get to recovery and maybe wipe dalvik and cache and reboot
i have never used TB for anything other than backup/restores, so can't help with dalvik integration
You might be able to fix it by wiping your cache from recovery.
Sent from my Nexus One using xda premium
Thanks for the advice! I'll give it a try as soon as I get my phone back from being fixed.
Hey guys, I hope you can help. I got my phone back with new power button, Yay! When I try to boot into recovery, teh Nexus X logo comes on for a moment and then I get a white triangle with an orange exclamation point. Do I need to use ADB to try and go to recovery and wipe my cache? I've never installed a recovery image. Do I need to do that or should there be a stock image already on my phone? Am I SOL?
One more thing that might help. I notice that when I go into HBOOT, the phone searching for 4 images from my SD card and can't find them. They go by too fast to write them all down but I think some are PASSIMG, PASSDIAG, etc. Again, do I need to load a recovery like clockworkmod on my phone first and then go into recovery to attempt to wipe my cache?
I get the same passimg all the time--no problem
If your phone came back from repair, you are probably unrooted and hence the triangle. At least that is the way I remember it, but has been two years since I rooted
If that is comfirmed by someone else, you wil need to reroot and install a recovery
A good time, if you haven't, to install android sdk and root/install recovery the right way and have full adb/fastboot features
there other ways I am not familiar with
does the lock show unlocked on the screen, they could have relocked bootloader
the wiki has the instructions, just have to navigate to the htc smartphones and N1
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Thanks I'll check. I only had teh power button fixed and not by HTC so I doubt they unrooted it. I'm still in a bootloop but I can use superoneclick still, so I'll give that a try.
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
holtonhj said:
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
Click to expand...
Click to collapse
You really know nothing huh. The triangle is the recovery. Press power button and volume up at the same time, it will the show you some options like wipe cache.
n1newbie said:
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
Did you miss the "stuck in boot loop" part?
sorry,
meant that the triangle is your stock recovery--
you install recovery thru fastboot not adb
i would still, if you haven't, install android sdk on pc-unlock bootloader (fastboot oem unlock) and fastboot recovery--all in wiki
i think it was mentioned--holding down pwr and tb will get you into fastboot mode--phone connected and usb debugging selected on phone
you'll just have more flexibility with flashing roms etc and getting out of trouble
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.