hi guys
after updaring to lol 5.1.1 b310 ed to install many RECOVERIES it failed itried to root it but i cannot i tri& emui 3.1 changed to download new version and recovery
after 3 hours i tried to enterrecovery again & i founded TWRP installed > i install root & every thing well but by mistake i wiped all thing by TWRP system & all thing after that my mobile still at honor powerd by android logo & i tried to enter to TWRP it says no system mounted & TWRP disappeard & emui recovery restord i tried to flash system.img by fastboot but fastboot says could not allocate can not load system.img
help me please important files of my job at internal storage what should i do
No solution? No roms for middle east version? Why did Huawei made this piece of sh**? I have been searching for roms for honor 4x che2-L11C185Bxxx (middle east version) and found nothing....?
did you tried force update by volume up + volume down + power without usb connected?
did you fixed your device?
Iam facing an issue while iam installing TWRP through odin with red message in download mode "only official binaries are to flashed" and the the status in KG-prenormal
Frp-off
Oem-off
As in developers option i see oem toggle on and off then whats the solution to install TWRP should i wait for 7 days is only solution
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
hello fellas , i have s10 ,problem : always booting up to recovery mode ( couldn`t find solution for it )
,,,, oem is locked and there is no way i can flash twrp or custom rom off course ( btw i am noob)
i tried flashing combination rom using odin ( just to enable usb debugging ) but many msesages of (please get the approval ) for pit ,bootloader, system ...etc
googled the issue , found someone saying it is sort of protection that requires unique key should be requested from samsung
So , how can in bypass it to make successful combination rom flashing ?
any extra files needed plus to the combination rom and pit file ?
please help me out
note : repeat: my phone is oem locked , at flashing stock rom is success but reboots directly to recovery mode ...this is my major problem ,
if anyone can post me sm-g973f (bit15) adb enabler file ?????
it might help
if you guys can hand me in either of those it will be deeply appreciated
thank you all
giants....does combination flashing successful with test points ? and where can i find them inside s10 ?
Hello Rossen, since you have no experience in this area, I know a lot of things that I took the simplest for my S10 exons SM-G973 F. Installation. John WU the official firmware with magisk modify AP official firmware that you transfer to your S10, then once do you transfer magisk patches with Adb to your PC with Adb pull.
Then with Odin you flash the following 4 files BL-AP magisk patched-Cp-Home CSC you let start, you open magisk active Zygisk restarted if rooted...
I forgot TRWP even if I managed once to install it with magisk then bugs and loss of rooting following updating magisk, normally to install TRWP you must already be rooted with magisk then install TRWP either by modify TRWP image with magisk or by the managed TRWP application you directly flash the TRWP image of the application.
https://topjohnwu.github.io/Magisk/install.html
meric57 said:
Hello Rossen, since you have no experience in this area, I know a lot of things that I took the simplest for my S10 exons SM-G973 F. Installation. John WU the official firmware with magisk modify AP official firmware that you transfer to your S10, then once do you transfer magisk patches with Adb to your PC with Adb pull.
Then with Odin you flash the following 4 files BL-AP magisk patched-Cp-Home CSC you let start, you open magisk active Zygisk restarted if rooted...
I forgot TRWP even if I managed once to install it with magisk then bugs and loss of rooting following updating magisk, normally to install TRWP you must already be rooted with magisk then install TRWP either by modify TRWP image with magisk or by the managed TRWP application you directly flash the TRWP image of the application.
https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
thanks for reply , sadly the device can take only the stock rom , any custom will be rejected due to oem lock , and if i flashed stock one it will boot up to recovery not the system ,
So you haven't done the unlocking of oem well you can't do anything, the best thing to do is redo these cleanly you reflash the official rom then you unlock your S10 you press power plus bixby and you connect to the pc, then you press and hold volume up and unlocking is done.
Then you will restart as at the first start you install magisk, activate developer mode about the phone press on low version 7 times then in developer you activate USB debugging.
And you do as I explained.
meric57 said:
So you haven't done the unlocking of oem well you can't do anything, the best thing to do is redo these cleanly you reflash the official rom then you unlock your S10 you press power plus bixby and you connect to the pc, then you press and hold volume up and unlocking is done.
Then you will restart as at the first start you install magisk, activate developer mode about the phone press on low version 7 times then in developer you activate USB debugging.
And you do as I explained.
Click to expand...
Click to collapse
already said when i flash stock rom device turns up to recovery mode not to the system . the only thing i see is flashing combinations which is now impossible without token , is there a trick or workaround to bypass getting in the recovery mode after flashing stock ?
put device in download mode start from scratch with odin official firmware
meric57 said:
put device in download mode start from scratch with odin official firmware
Click to expand...
Click to collapse
like i said before , successful flashing stock rom , after that the mobile goes to recovery mode not to the system
Hello Rose, I had the concern like you these for its that it is necessary to start from zero. I also did like you too when I start with power back TRWP direct, I had to reinstall official rom Android 12, use which TRWP for your S10 exynos the one the twrp-3.6.2_9-2-beyond1lte.img yes or no you know that you have to patch its image with magisk 25.2 then rename it in recovery and replace the one in AP with the recovery modify then flash with odin.
In your quote start with TRWP then you take the boot.img of the AP flashed it then try to restart in recovery.
watch this video
i dont have active android in my device and it can NOT boot up to system if i flashed stock
before stupidly activate oem lock i had zero problems , locked oem and flashed stock and then i got recovery interface , can not log in system
i have LG 4k tv which i messed its software , but managed to reset it all by shorting pins >>> can it be done the same way with my s10 ? if yes , anyone can show me where circuit shorting pins are ?
not at all the only thing to do if you manage to boot trwp recovery in boot do boot download and flash the official rom with csc and not home
meric57 said:
not at all the only thing to do if you manage to boot trwp recovery in boot do boot download and flash the official rom with csc and not home
Click to expand...
Click to collapse
not working ,,,, any instructions or updates to flash factory binary without fail via odin ?
googled to download sboot to fix the whole thing , no luck , can anyone attach it here please ? bit15 (uf protection)
Hello Roseen, so how does your S10 react starting on TRWP or getting stuck on the Samsung logo. I don't see that you tried to do things without having looked at the tutorials on XDA. well a 4G exynos G973F you have the Android 12 UI 4.1 rom.
Does your pc recognize the S10 when it starts up, did you get the message in red safety e and the yellow triangle plus the message, at worst try with another smartphone to film the start-up.
What does your last post mean with bit15.
I put you the link for the tutorial s 10 of the forum
Tutorial : Root Galaxy S10 Series Android 12 One UI 4.1 Stock Firmware
Root Samsung Galaxy S10 Series Android 12, WITHOUT Ramdisk Root Samsung S10+ - S10 - S10e SM-G97xxx, Stock Rom Android 12 - UI 4.1 Latest Version (I tested G970FXXSGHWC2) (Without combination keys for active Magisk after normal restart –...
forum.xda-developers.com
Hi,
I'm trying to install pixel plus ui rom on my redmi note 9 device.
I've unlocked the bootloader.
Now, I'm trying to install the custom recovery ( pixel exprience custom recovery ),
I followed the instructions and flashed the custom recovery but when i try to open it ( using power + volume up ) it doesn't show.
I tried to use twrp instaed and it didn't work too. but the system recovery works fine.
the fastboot mode also works fine.
any help?
Note:
When i use the comman ( fastboot reboot recovery.img ) I get an an error saying too many links command failed
I have the same issue. Can not enter recovery, but fastboot is working
Did you resolve this issue?
Hi im using POCO X3 GT ( CHOPIN) i have no twrp but i unlock bootloader , and try to flash magisk then boom i got bootloop , now i tried to flash my rom but when im flashing ( while in fastboot)
It keeps restarting worse my stock recovery is gone too ,
help also I try to install twrp but the Cmd or command promt say ( waiting for device its just like it cant read)
ANY HELP WILL BE APPRECIATED
also when im flashing on miflashtool , the timer doesnt end really im lost