My phone is reacting like I clicked on the power button when I put it on a wireless charger.
1. It start's iris scanner.
2. Shows a "hold phone closer" at the top and "use biometrics or swipe screen to unlock" at the bottom.
3. After some time it shows the tap icon to try iris recognition again.
4. It turns off the screen.
Any setting or fix for it?
Ruturaj001 said:
My phone is reacting like I clicked on the power button when I put it on a wireless charger.
1. It start's iris scanner.
2. Shows a "hold phone closer" at the top and "use biometrics or swipe screen to unlock" at the bottom.
3. After some time it shows the tap icon to try iris recognition again.
4. It turns off the screen.
Any setting or fix for it?
Click to expand...
Click to collapse
I know I my phone when I plug it in to charge it automatically turns on the screen. So maybe you have the automatic unlock option turned on where you don't have to swipe up to start the Iris unlock process
Frozenrosen said:
I know I my phone when I plug it in to charge it automatically turns on the screen. So maybe you have the automatic unlock option turned on where you don't have to swipe up to start the Iris unlock process
Click to expand...
Click to collapse
Found it, thank you. Iris unlock when screen turns on. I think I turned it on in winter when I wasn't able to use it because of gloves. I wish there was an option to not turn on the screen when putting on charge.
Ruturaj001 said:
I wish there was an option to not turn on the screen when putting on charge.
Click to expand...
Click to collapse
Just out of curiosity, what's the disadvantage of it briefly turning on then? I don't see what good or harm it does.
Gary02468 said:
Just out of curiosity, what's the disadvantage of it briefly turning on then? I don't see what good or harm it does.
Click to expand...
Click to collapse
It's distracting as it is in my line of sight, right below monitor on my desk. Also when the battery is low/dying, it seems like a waste. There is no harm but I don't see a point as well.
Related
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
I'm finding it quite difficult to turn on the screen of my XZ1C without unlocking the phone...
Sometimes I just want to look at the lock screen without the phone unlocking, but the fingerprint scanner reacts so quickly that the lock screen (along with any notifications) is gone before I've even read the time!!
Is there a way to set a delay (probably not) or set another button (vol? camera?) to wake up the screen without unlocking the phone? I'd rather not have to disable the fingerprint scanner, and I never had this issue with my Z5C.
Seriously?
People complaining about the fp-scanner being too fast nowadays?
As for solutions, you could always use a finger where you haven't stored the print.
Or use your fingernail to press the button.
4rz0 said:
Seriously?
People complaining about the fp-scanner being too fast nowadays?
As for solutions, you could always use a finger where you haven't stored the print.
Or use your fingernail to press the button.
Click to expand...
Click to collapse
That's what I'm doing - it's a bit awkward! On the Z5C there was just enough time to remove your finger before the phone unlocked so you could have a quick glance at the screen. It must use more battery to fully wake up the phone everytime the power button is pressed?
I guess "tap to wake" would have been another solution to my (admittedly small) problem.
Oh, come on now. Fast fingerprint scanner is a good thing. There shouldn't be such thing as too fast. I would simply "reserve" my middle fingers for checking the lock screen.
Even if I use the "wrong" finger, the lockscreen bounces to the left because it's tried reading the fingerprint which is also annoying when all I want to do is check the time and for any notifications!
a novel approach i just set up: when scanning your thumb, only scan the pad and not the tip. then you can use the pad to unlock and the tip to check the lock screen.
(doesn't fix the problem of the bounce tho)
Use this app: https://play.google.com/store/apps/details?id=com.jarsilio.android.waveup
Just wave your hand over the proximity sensor and the screen will turn on but won't unlock the phone if you have a lock.
Don't enable the lock screen functionality though, it doesn't support fingerprint unlock.
Lol why don't u just use a another finger?
Dany XP said:
Lol why don't u just use a another finger?
Click to expand...
Click to collapse
See post #5...
hbkid said:
I'm finding it quite difficult to turn on the screen of my XZ1C without unlocking the phone...
Sometimes I just want to look at the lock screen without the phone unlocking, but the fingerprint scanner reacts so quickly that the lock screen (along with any notifications) is gone before I've even read the time!!
Is there a way to set a delay (probably not) or set another button (vol? camera?) to wake up the screen without unlocking the phone? I'd rather not have to disable the fingerprint scanner, and I never had this issue with my Z5C.
Click to expand...
Click to collapse
look on the Play Store for Power Button to Volume Button by TeliApp, the app is old but still works and will allow you to use the volume down button as a second screen on button. it reverts back to being a normal volume down button once the screen is on. no root required. (I would post a link but XDA won't let me because I'm a new user)
Hey all, I was wondering if anyone knows if the phone is in standby and the screen is off can you just touch the finger print scanner to turn on and unlock, or do you have to double tap and or hit the power button first? ! Also, if the AOD is on can you just touch the scanner to unlock? I figure AOD should let you and lift to wake would work. Just not sure if the screen is off if you need to go through an extra step to get the scanner to work, as I don't have my unit yet and can't test it all. Thx!
screen off, yes you can just touch it and it will unlock. no need to wake the screen.
dansan382 said:
screen off, yes you can just touch it and it will unlock. no need to wake the screen.
Click to expand...
Click to collapse
Awesome! Thank God. As I had seen videos on YouTube that showed people hitting the power button first to initiate the screen on then touch the scanner and I was aggravated if that was the case lol :highfive:
iteam said:
Awesome! Thank God. As I had seen videos on YouTube that showed people hitting the power button first to initiate the screen on then touch the scanner and I was aggravated if that was the case lol :highfive:
Click to expand...
Click to collapse
Yeah I think they're just trying to fully demo. It works screen off, AOD mode, screen on... whichever way you want it. Since its not optical it doesn't need to light the screen
dansan382 said:
Yeah I think they're just trying to fully demo. It works screen off, AOD mode, screen on... whichever way you want it. Since its not optical it doesn't need to light the screen
Click to expand...
Click to collapse
That's what my gut told me.. thanks for clarifying and reinforcing my thoughts and Hope's! 2 more days and I can play, ceramic white S10+ 512 baby:fingers-crossed:
I have my P5 which I love. But there's one annoying thing about it that I can't figure out how to toggle: When I turn off the display by clicking the power button, then when I touch the (now turned off) display again (eg whwen putting the phone in my pocket) it turns on in an "unlocked" state. The padlock on the top of the screen is unlocked and I can interact with whatever apps are displayed on my lock screen. If I turn off the display and put the phone down on a table then (at least after a while) when I double click the display it turns on and the padlock is now displayed locked and I can interact with anything until I actually unlock it using the fingerprint sensor.
So my question is: Is there any way I can make the phone lock immediatly and completely when I switch off the display by clicking the power button?
Thanks in advance
kroogar said:
I have my P5 which I love. But there's one annoying thing about it that I can't figure out how to toggle: When I turn off the display by clicking the power button, then when I touch the (now turned off) display again (eg whwen putting the phone in my pocket) it turns on in an "unlocked" state. The padlock on the top of the screen is unlocked and I can interact with whatever apps are displayed on my lock screen. If I turn off the display and put the phone down on a table then (at least after a while) when I double click the display it turns on and the padlock is now displayed locked and I can interact with anything until I actually unlock it using the fingerprint sensor.
So my question is: Is there any way I can make the phone lock immediatly and completely when I switch off the display by clicking the power button?
Thanks in advance
Click to expand...
Click to collapse
Mine locks immediately.
This setting?
andybones said:
This setting?
Click to expand...
Click to collapse
Actually yes. But I had that switched on but as it says: "Except when kept unlocked by Smart lock". That I had missed. Smart lock was switched on and I hope that was the culprit. It is now switched off
Thanks for the help!
kroogar said:
Actually yes. But I had that switched on but as it says: "Except when kept unlocked by Smart lock". That I had missed. Smart lock was switched on and I hope that was the culprit. It is now switched off
Thanks for the help!
Click to expand...
Click to collapse
Very welcome, my friend!
Glad you got it setup.
So I have set a PIN and also recorded biometric data (Fingerprints and Face). The
PIN seems to be the default method. Is there any way to make either my fingerprint
or face recognition the default (w/PIN as backup)? It's not obvious
TIA
it will always want your pin at bootup. after that biometrics should take over if they're stil turned on.
3mel said:
it will always want your pin at bootup. after that biometrics should take over if they're stil turned on.
Click to expand...
Click to collapse
Does not behave like that. For example if I turn screen off using a double tap, then when I touch the screen to turn it on it still wants the PIN after I swipe up???? It says "Enter your PIN as required by the security policy" ??
docfreed said:
Does not behave like that. For example if I turn screen off using a double tap, then when I touch the screen to turn it on it still wants the PIN after I swipe up???? It says "Enter your PIN as required by the security policy" ??
Click to expand...
Click to collapse
that's new to me. maybe you've selected something I've never used, secure folder or something like that !?