I downloaded the South African XFV (Vodafone) firmware and flashed it with Odin.
AP
BL
CP
CSC
After reboot the language is in German. Software shows VD2/VD2/XFV instead of XFV/XFV/XFV.
Does anyone know how I can fix this??
I want to use Samsung Pay but can't because my region is not correct.
Which firmware you have installed? Sounds like you have installed a branded Vodafone firmware which don't have your CSC included.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Logel said:
Which firmware you have installed? Sounds like you have installed a branded Vodafone firmware which don't have your CSC included.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
I used Samfirm and searched for the South African XFV firmware.
The only one that came up is the Vodafone XFV firmware. (My phone's country code is XFV)
The other two that's available for South Africa is XFE and XFA (if I remember correctly)
Will I be able to install one of the other South African firmwares on my XFV device?
Sent from my SM-N950F using Tapatalk
So it was this CRG1 firmware version with OVF CSC (see screenshot)?
You could try to remove your SIM card and reboot 1 time. Then shutdown, put the card back in and boot again. Normally it should recognize the card and switch to the correct CSC View attachment 4567759
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Piesang said:
I used Samfirm and searched for the South African XFV firmware.
The only one that came up is the Vodafone XFV firmware. (My phone's country code is XFV)
The other two that's available for South Africa is XFE and XFA (if I remember correctly)
Will I be able to install one of the other South African firmwares on my XFV device?
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
Hi there, first of all your thread is in the wrong sub-forum "development". It would be better placed in the "Q & A" section.
The firmware consisting of BL, AP, CP is the same for every country. It's the CSC that makes the difference. If you want XFV for Vodacom South Africa you must download the respective package. I usually use Sammobile. I personally am on DBT Germany which works 100% here in SA. If you are looking for VoLTE and WiFi calling forget it. According to Vodacom Cresta (in Joburg) the Note8 is not configured for these services which I find rather strange. But that's Vodacom anyway. Cheers LJ
That's not 100% correct. WiFi calling and VoLTE works for our Note 8. If it's not available by CSC, then it's a hidden feature which maybe can by enabled with apps like QuickShortcutMaker. Maybe VoLTE isn't supported by Vodafone in SA - that I don't know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
I did a Factory reset with a Vodacom sim and then replaced it with my MTN sim while loading.
Everything sorted now.
Sent from my SM-N950F using Tapatalk
Logel said:
That's not 100% correct. WiFi calling and VoLTE works for our Note 8. If it's not available by CSC, then it's a hidden feature which maybe can by enabled with apps like QuickShortcutMaker. Maybe VoLTE isn't supported by Vodafone in SA - that I don't know. View attachment 4567893
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
Of course, VoLTE & WiFi Calling works on the N8. I had it working on DBT when I was in Germany 4 weeks ago. But on Vodacom it just doesn't. It's a carrier specific problem. They assured me that both services have been activated. But that's Africa. You can never be sure. LJ
Related
My dad got me a Note 9 from the middle east (exynos, dual sim). Its Active CSC is KSA. I live in Canada and have been using it without any issues for the past few months. I was also able to recently update it to Pie since KSA is part of the OXM multi-csc.
I don't see an option for WiFi Calling, don't have VoLTE, and can't use Samsung Pay. I've been reading around for a few months now trying to wrap my head around all things Samsung (since this is my first Samsung phone...). I understand that this is due to my phone having KSA as the active CSC and being used in Canada? My provider (Rogers) has confirmed that they have WiFi calling activated on my line.
I was hoping someone could point me the right direction if there is any solution to this? There is no dual-sim version in Canada so I assume flashing some other Canadian firmware won't work (as it would be for a single-sim model).
Change CSC in THL. Follow the guide carefully:
https://forum.xda-developers.com/showpost.php?p=78438552&postcount=2011
Dowload New Version uploaded 15 Jan 2019:
https://forum.xda-developers.com/galaxy-note-9/how-to/combination-n960f-t3833752
On step 9 : download wtih SamFirm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and good to go! :good:
Thanks for the information. I'm wondering what CSC am I changing the phone? Canada is not part of the OXM Multi-CSC? The Canadian versions are also single-sim not DS. Can I use the method to change the CSC to a Canadian carrier's CSC and then still flash the Multi-CSC firmware?
You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44
megatooth said:
You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44
Click to expand...
Click to collapse
Ok - So I went through the process. I used RealTerm and changed the CSC to XAC (Canada, unbranded). Note that this is not part of the OXM Multi-CSC. After everything was done, the phone defaulted to XEU (United Kingdom). Trying the method again with SIM card inserted before restart didn't change this outcome. However, this whole time I was using the XSG (UAE) firmware to update the phone.
I will now try again with the THL firmware and hope that it works!
I'm assuming Samsung Pay will still be unavailable?
Samsung Pay will be available for unroot knox= 0x0! And Caller ID and spam protection.
Thanks for all your help so far. Things that I've learned so far:
1) Changing the CSC through the method you shared didn't really work when it was outside of the OXM Multi-CSC. For example, I tried changing CSC to RWC (Rogers, Canada) or XAC (Canada, Unbranded). When I did this and flashed any of the latest SM-N960F firmware (whether XSG, DBT, or THL) -- the device would default to XEU (United Kingdom). I'm assuming this is happening because the manually set Canadian CSC doesn't exist within the OXM multi-csc.
2) I tested this out by setting the CSC to THL and flashing the THL firmware. This time it did indeed change to THL firmware. Unfortunately, things like WiFi Calling and VoLTE were still not available. Samsung Pay worked - but didn't let me add any Canadian cards.
Rooting is obviously not an option on this phone due to tripping knox. Maybe sometime down the road someone can figure it out.
Or you can try to change for SM-N960W model.
megatooth said:
Or you can try to change for SM-N960W model.
Click to expand...
Click to collapse
SM-960W is the Snapdragon single-sim variant. I feel worst case it will fry the phone. Best case, I'll lose the dual-sim capability..
Have u tried installing the Canadian csc going into recovery wiping cache and then doing a reset from there? Then reboot with your Canadian sim only installed (no other sim or second sim if dual). Usually this triggers the correct csc code
mikey_sk said:
Have u tried installing the Canadian csc going into recovery wiping cache and then doing a reset from there? Then reboot with your Canadian sim only installed (no other sim or second sim if dual). Usually this triggers the correct csc code
Click to expand...
Click to collapse
Seems like the only way to do that would be to root the device since there is no SM-N960F in Canada -- only SM-N960W. So all the Canadian firmware is for SM-N960F. My understanding is that I would have to root the device and then change the CSC based on this discussion:
https://forum.xda-developers.com/ga...960n-n960u-n960u1-n960w-n9600-t3833721/page18
If I follow the method explained earlier by changing CSC with RealTerm -- the device rejects the the Canadian CSC (e.g. XAC or RWC) and defaults to XEU (which is part of the OXM mutli-csc).
you can't flash a different model firmware with odin
I did it and works for me volte is working again, it dosen´t matter the firmware you flash, you must change csc code, follow the link and you can change it, its´´s so easy
johnmilthon said:
I did it and works for me volte is working again, it dosen´t matter the firmware you flash, you must change csc code, follow the link and you can change it, its´´s so easy
Click to expand...
Click to collapse
Can you explain what did you do which worked?
Sent from my SM-N960F using Tapatalk
Question on CSC for T-Mobile USA
megatooth said:
You have Note 9 exynos variant, so you have nothing to lose . Because you will be in the same situation as the first time when you put the sim. If you change CSC ( THL) you will have wificall and volte and native call recording. That's what I did. The only difference is the sim , and I do not think it influences anything.
Dial *#1234# to find current firmware details.
ATTENTION! : after installing PIE Do NOT start the first setup with SIM. It changed the CSC back with sim!!!
https://forum.xda-developers.com/showpost.php?p=78673521&postcount=44
Click to expand...
Click to collapse
Would I be using THL for T-Mobile in USA as well? I have SM-N960F D/S phone running Android Pie.
No. Not for T-Mobile.
wallpapers :
https://forum.xda-developers.com/showpost.php?p=79353268&postcount=2
firmwares :
https://samfrew.com/fr/model/SM-A705FN/
A705FN OJM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A705FN OXM
regards
A705FN OGC ( Orange )
.
Will the latest Ukraine firmware work fine with a BTU device?
@theoneofgod
yes you can , but
latest firmware for BTU is A705FNXXU1ASD1 CSC A705FNOXM1ASD1 with april sécurity patch
latest firmware for SEK is A705FNXXU1ASD6 CSC A705FNOXM1ASD6 with april build date and may sécurity patch ( edited )
if you upload SEK firmware , you will not get OTA uppdates for your BTU CSC , so you can wait for may BTU release
regards
error
yakapa40 said:
@theoneofgod
yes you can , but
latest firmware for BTU is A705FNXXU1ASD1 CSC A705FNOXM1ASD1 with april sécurity patch
latest firmware for SEK is A705FNXXU1ASD6 CSC A705FNOXM1ASD6 with april sécurity patch
if you upload SEK firmware , you will not get OTA uppdates for your BTU CSC , so you can wait for may BTU release
regards
Click to expand...
Click to collapse
The touch, camera, and fingerprint reader improvements interest me a lot. Doesn't ASD6 have May patch?
@theoneofgod
yakapa40 said:
@theoneofgod
Click to expand...
Click to collapse
Yeah. May patch. I guess flashing back to BTU would be possible in the future, if/when that gets ASD6?
yes very strange but with build date 29/04/2019 and may security pach
you can upload this firmware and after wait for a new BTU firmware ( may )
What is it with Ukraine? They've got another new firmware.
Thanks for this!
samsung galaxy a70
i have the samsung galaxy a70 and the model i have is sm-a7050 and i know there are 2 or 3 different model's...the question i have is does all of the different models work in the usa?? because the model sm-a7050 i have is only pulling 3g network singles i'm not getting 4glte singles and i went in the network apn settings and set that up with my network provider which is cricket wireless and this phone network bans 2 out 5 should be working....so i dont know if anybody can help me out with this problem but really hope someone can
Jamie5150 said:
i have the samsung galaxy a70 and the model i have is sm-a7050 and i know there are 2 or 3 different model's...the question i have is does all of the different models work in the usa?? because the model sm-a7050 i have is only pulling 3g network singles i'm not getting 4glte singles and i went in the network apn settings and set that up with my network provider which is cricket wireless and this phone network bans 2 out 5 should be working....so i dont know if anybody can help me out with this problem but really hope someone can
Click to expand...
Click to collapse
SM-705MN works in the USA
Supports the following bands:
LTE FDD: 1 2 3 4 5 7 8 12 13 17 20 28 66
LTE TDD: 38 40 41
SM-705FN Is missing a bunch of bands
LTE FDD 1 3 5 7 8 20
LTE TDD 38 40 41
@Jamie5150
regards
So then maybe I should try and update the firmware right? And can I get the firmware on here?
More places have got an update which is better. No word of camera improvements like Ukraine.
Hey guys, so I downloaded BTU-A705FNXXU1ASE4-20190529180340.zip and would like to flash the phone purchased in the UAE to BTU, do I just flash it with ODIN? How do I change the CSC?
mateuszd said:
Hey guys, so I downloaded BTU-A705FNXXU1ASE4-20190529180340.zip and would like to flash the phone purchased in the UAE to BTU, do I just flash it with ODIN? How do I change the CSC?
Click to expand...
Click to collapse
Seems like nobody replied to your query.
Flash it with Odin normally, insert any UK SIM card, do a factory reset and it will automatically change to BTU.
Hi,
can i flash CSC from OJM to OXM with different region [ united arab emirates XSG --to-> french XEF]
yes you can if it is not a downgrade
dont forget to save all your data
regards
Hey guys, I recently bought this phone with this firmwares and I don't know which phone carrier should I download as I don't live in US
Thanks for advanced
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Odin than go to sammobile and download latest formware for your country and flash it with Odin...on youtube and here on XDA is a lot tutorials how flash
Poslano z mojega SM-N950F z uporabo Tapatalk
ari.fz said:
Hey guys, I recently bought this phone with this firmwares and I don't know which phone carrier should I download as I don't live in US
Thanks for advanced
Click to expand...
Click to collapse
On your screen from your first screenshot scroll down a bit and you'll should see the 3 csc/csc/csc code. Eg XAA/XAA/SPR....
Assuming you have an international sim card in phone:
The last csc code in that group is the phone's Carrier (like AT&T, T-mobile and Sprint).
Then go to Sammobile.com/firmware and look for:
SM-N950U
(Your CSC code)
Read this thread if you want to change your sm-n950u to sm-n950u1:
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
SM-N950U IS Carrier phone
SM-N950U1 IS Non-carrier phone (So less bloatware)
Oh and You can NOT flash SM-N950F firmwares on SM-N950U/U1 phones!!! Different cpus! (Exynos (sm-n950F) and snapdragon (sm-n950u/u1))!
BluePhnx said:
On your screen from your first screenshot scroll down a bit and you'll should see the 3 csc/csc/csc code. Eg XAA/XAA/SPR....
Assuming you have an international sim card in phone:
The last csc code in that group is the phone's Carrier (like AT&T, T-mobile and Sprint).
Then go to Sammobile.com/firmware and look for:
SM-N950U
(Your CSC code)
Read this thread if you want to change your sm-n950u to sm-n950u1:
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
SM-N950U IS Carrier phone
SM-N950U1 IS Non-carrier phone (So less bloatware)
Oh and You can NOT flash SM-N950F firmwares on SM-N950U/U1 phones!!! Different cpus! (Exynos (sm-n950F) and snapdragon (sm-n950u/u1))!
Click to expand...
Click to collapse
I didn't find csc code on software information. My first screenshots is all information my phone have, weird. So. I downloaded phone info to reveal csc code and here's what I got
ari.fz said:
I didn't find csc code on software information. My first screenshots is all information my phone have, weird. So. I downloaded phone info to reveal csc code and here's what I got
Click to expand...
Click to collapse
Hmm you should see the 3 Csc in that screen like mine .
What model does the "General " tab say?
SM-N950U
OR
SM-N9500
???
Bit confused about your phone info screen.
This is mine: (my phone is SM-N950F and I'm in Canada on a Canadian carrier.)
But the country origin says UK/GB XEU
Your country of origin is Hong Kong and model SM-N950U!
Shouldn't your model be SM-N9500?
Can you get into download mode and see your model or recovery mode? If you get anything other then English language let us know.
My General screen:
On the "Hardware" tab make sure it says Qualcomm 835 not anything else like Mediatek...
BluePhnx said:
Hmm you should see the 3 Csc in that screen like mine .
What model does the "General " tab say?
SM-N950U
OR
SM-N9500
???
Click to expand...
Click to collapse
BluePhnx said:
Bit confused about your phone info screen.
This is mine: (my phone is SM-N950F and I'm in Canada on a Canadian carrier.)
But the country origin says UK/GB XEU
Your country of origin is Hong Kong and model SM-N950U!
Shouldn't your model be SM-N9500?
Can you get into download mode and see your model or recovery mode? If you get anything other then English language let us know.
Click to expand...
Click to collapse
SM-N950U. I assure you there's no service provider sw version section on software information and there's no model on download mode. That's what I'm confused about.
You mean language setting? If so, I can change any language I want, not only English options
BluePhnx said:
My General screen:
On the "Hardware" tab make sure it says Qualcomm 835 not anything else like Mediatek...
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/help/version-s8-t3907112
In that thread someone said there was snapdragon for HK version.
Here's all information on my phone
Problem solved. I installed N950U1 model on my device and running smoothly. Thanks
※ I'm sorry. I'm writing here to get information from various places. And the CSC transformation of S10 and S10 5G is similar, so I'm going to leave it.
Hello, I live in Korea.
The phone you use is Galaxy samsung galaxyS10 5G(SM-G977N)
But there's a problem.
I'd like to change the CSC.
The CSC currently in use is LUC.
I would like to change the CSC to KOO in Korea.
However, the firmware of the KOO model was put in AP,BL,CP,CSC,USERDATA and it does not change.
Is there any way?
Please give me a good answer.
Install firmware with samfirm with countrycode u want then flash
Flash to Odin, but it won't change.
kpwnApps said:
Install firmware with samfirm with countrycode u want then flash
Click to expand...
Click to collapse
-------------‐--------------------
To change from CSC LUC to CSC KOO, the company received the initial firmware with countrycode KOO in the Sampirm and flashed it to Oddin, but it does not change. Is there any way I can change from CSC LUC to CSC KOO without turning?
5G is not workin
Hi,
977N is not connecting to 5G in my country (N77/78 5G-NSA). Changing of CSC can help me?
Any idea what can be couse?
overall phone is great, versions are
AP : G977NKSU1ASF3
CP : G977NKOU1ASG5
CSC: G977NOKR1ASF3
kimjoonyoung said:
※ I'm sorry. I'm writing here to get information from various places. And the CSC transformation of S10 and S10 5G is similar, so I'm going to leave it.
Hello, I live in Korea.
The phone you use is Galaxy samsung galaxyS10 5G(SM-G977N)
But there's a problem.
I'd like to change the CSC.
The CSC currently in use is LUC.
I would like to change the CSC to KOO in Korea.
However, the firmware of the KOO model was put in AP,BL,CP,CSC,USERDATA and it does not change.
Is there any way?
Please give me a good answer.
Click to expand...
Click to collapse
You could try this
https://forum.xda-developers.com/ga...de-how-to-change-s9-s9-csc-model-csc-t3870836
Galaxy samsung galaxyS10 5G(SM-G977N) CSC Change
kimjoonyoung said:
※ I'm sorry. I'm writing here to get information from various places. And the CSC transformation of S10 and S10 5G is similar, so I'm going to leave it.
Hello, I live in Korea.
The phone you use is Galaxy samsung galaxyS10 5G(SM-G977N)
But there's a problem.
I'd like to change the CSC.
The CSC currently in use is LUC.
I would like to change the CSC to KOO in Korea.
However, the firmware of the KOO model was put in AP,BL,CP,CSC,USERDATA and it does not change.
Is there any way?
Please give me a good answer.
Click to expand...
Click to collapse
Hi,
Have you managed to change your CSC? If yes, How?
Regards
10dar said:
Hi,
977N is not connecting to 5G in my country (N77/78 5G-NSA). Changing of CSC can help me?
Any idea what can be couse?
overall phone is great, versions are
AP : G977NKSU1ASF3
CP : G977NKOU1ASG5
CSC: G977NOKR1ASF3
Click to expand...
Click to collapse
Same issue for me! , I got the phone and I'm living in Saudi Arabia? any help to resolve this problem?
nawaf2816 said:
Same issue for me! , I got the phone and I'm living in Saudi Arabia? any help to resolve this problem?
Click to expand...
Click to collapse
Saudi doesn't have 5G yet, of course it won't connect to something that do not exist.
Mohamedkam000 said:
Saudi doesn't have 5G yet, of course it won't connect to something that do not exist.
Click to expand...
Click to collapse
No Sir , we have 5G launched by 2 service providers (STC and Zain) so far and the third coming soon
---------- Post added at 02:54 PM ---------- Previous post was at 02:47 PM ----------
I'm trying to figure out the issue preventing 5G connection, whether it is incompatible band frequency! or phone firmware (Koria oriented) is causing the problem!
firmware versions are :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kimjoonyoung said:
※ I'm sorry. I'm writing here to get information from various places. And the CSC transformation of S10 and S10 5G is similar, so I'm going to leave it.
Hello, I live in Korea.
The phone you use is Galaxy samsung galaxyS10 5G(SM-G977N)
But there's a problem.
I'd like to change the CSC.
The CSC currently in use is LUC.
I would like to change the CSC to KOO in Korea.
However, the firmware of the KOO model was put in AP,BL,CP,CSC,USERDATA and it does not change.
Is there any way?
Please give me a good answer.
Click to expand...
Click to collapse
Hi, can you please tell me what's the csc of unbranded/unlocked ? i'm in LUC and i want to change to the unlocked firmware
Good news friends!
Android 10 released for our device, available via OTA and also on SamMobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No hong kong version TGY
REDOTHELLO said:
No hong kong version TGY
Click to expand...
Click to collapse
no
Only Chile, Brazil, Peru and Panama for now.
I just got it on TPA CSC.
Mexico has received it also.
aromerblz said:
I just got it on TPA CSC.
Mexico has received it also.
Click to expand...
Click to collapse
Are you in North America?
Sent from my SM-N9600 using Tapatalk
zimplemeh said:
Are you in North America?
Click to expand...
Click to collapse
Am not, but does not matter so long I have the CSC for the firmware that is seeding. In my case TPA.
aromerblz said:
I just got it on TPA CSC.
Mexico has received it also.
Click to expand...
Click to collapse
Does that firmware have call recording?
Sent from my SM-N9600 using Tapatalk
livystewy01 said:
Does that firmware have call recording?
Click to expand...
Click to collapse
AFAIK it does not. It is based on CSC as well.
aromerblz said:
AFAIK it does not. It is based on CSC as well.
Click to expand...
Click to collapse
Is MXO for Mexico?
Sent from my SM-N9600 using Tapatalk
In chile not.. i am not update my note 9
Nothing yet for New Zealand.
zimplemeh said:
Is MXO for Mexico?
Click to expand...
Click to collapse
That is the Mexico unlocked device.
aromerblz said:
That is the Mexico unlocked device.
Click to expand...
Click to collapse
Thank you!
Sent from my SM-N9600 using Tapatalk
Which one?
What's the best unlocked ROM so far?
Panama, Ecuador, Paraguay, Bolivia, Trinidad and Togabo, Colombia, Chile, Brazil, Peru and "UNKNOWN".
Any reason to prefer any specific region?
it is too late
when android 10 will be released for SM-N9600 Hong Kong version !
I have one of these TGY (from Hongkong) N9600 devices... It is still stuck on the Dec security patch, NOT sure if Android 10 will ever make it. All updates so far have been slow.
I use the device mainly because I need to maintain 2 different phone numbers, so the dual-sim helps. But using it on AT&T postpaid, the service sucks... NOT to hijack this thread but I can't seem to pull anything above 25MBPS or push above 2MBPS, NO matter where I am. My wife's iPhone is easily able to download at 100+MBPS. May be it is time to jump over to the dark side (?)
how root n9600 android Q？
maxie.maverick said:
I have one of these TGY (from Hongkong) N9600 devices... It is still stuck on the Dec security patch, NOT sure if Android 10 will ever make it. All updates so far have been slow.
I use the device mainly because I need to maintain 2 different phone numbers, so the dual-sim helps. But using it on AT&T postpaid, the service sucks... NOT to hijack this thread but I can't seem to pull anything above 25MBPS or push above 2MBPS, NO matter where I am. My wife's iPhone is easily able to download at 100+MBPS. May be it is time to jump over to the dark side (?)
Click to expand...
Click to collapse
You check, just got an android 10 update for Samsung Galaxy 9600 Hongkong.
ect_hd2 said:
You check, just got an android 10 update for Samsung Galaxy 9600 Hongkong.
Click to expand...
Click to collapse
Yeah, got the update but the battery life sucks now... I wonder if changing the CSC would help with the problems I reported above...
BTW, the internal memory on my Note-9 is encrypted... After the android 10 update, the start-up screen is in Chinese. Anyone else seeing this? How do I change this to English? After entering my pin & successfully booting up, everything else is in English as expected. So it is just the start-up screen...
Help appreciated. Thanks