Related
THIS IS FOR INFORMATIONAL PURPOSES ONLY. BY USING SUCH A SERVICE COULD BE AGAINST YOUR CARRIER'S TERMS OF SERVICE.
Ok, I have been playing around with the Wireless Tether for Root User and got it to work on the Droid Eris!
For those who don't know what this is useful for, it allows your phone to be a gateway/router and broadcast your 3G/Edge network to other devices such as a laptop.
To get this to work, you must have 2.1 with root and flashed custom rom "Rooted 2.1 v0.3"
To get to this point, follow this guide: http://forum.xda-developers.com/showthread.php?t=647707
Once you are to this point, grab "wireless_tether_1_70-pre2_htc.apk" from http://code.google.com/p/android-wifi-tether/downloads/list?can=2&q=HTC+Donut
Make sure you allow Apps from unknown sources to be installed. (Menu > Settings > Applications > Unknown sources).
Install the app. Depending on how you acquired the download, use the browser download list, Astro Browser, Android Mate ect.
When launching the app, Superuser Whitelist will pop-up. Click always allow.
Congratulations! Now you can use your phone as a router for other devices.
THIS IS FOR INFORMATIONAL PURPOSES ONLY. BY USING SUCH A SERVICE COULD BE AGAINST YOUR CARRIER'S TERMS OF SERVICE.
I had success using "wireless_tether_1_70-pre2_htc.apk", but other versions might work also. You might get this to work without flashing the custom rom but you will have to have Superuser Whitelist, which I had trouble doing.
awesome tutorial for people that weren't sure. I added it to photex-media with working links and all =) thanks again.
any reason you went the 1.7 version as opposed to wireless_tether-2_0-pre8? I've been runnning 2.0.8 for a day or two now on and its been great.
scottdot2008 said:
any reason you went the 1.7 version as opposed to wireless_tether-2_0-pre8? I've been running 2.0.8 for a day or two now on and its been great.
Click to expand...
Click to collapse
Oh I was having problems, and after I flashed the rom, that was the 1st one I tried and it worked. I will try other versions too.
Fair enough, just wasn't sure if you knew something that I didn't about the wifi chip or something. Sorry to be a stickler.
Ive got it installed and when i load it, a panel pops up saying "SU request" but it either doesn't show anything or Force closes. Is my recovery messed up?
I don't know that it would directly be a result of your recovery, generally that's not what is running the SU program. It would be helpful to know what ROM you're currently running, as well as what version of the tether you're trying to run.
im running ivans 2.1 v0.3 and i tried the 1.7pre2 apk and the 2.0pre8. With the 1.7pre2 it force closed at the SU request and 2.0pre8 it just doesn't show anything at SU request and somewhat freezes.
EDIT!!::: i have no idea why but my usb debugger setting got switched off so i switched it back on and i can start the program and it looks like it is working, but no wireless device ive tried can see the phone as a accesspoint. BTW now i am using the 1.7pre2 version
ch4sethe5un said:
im running ivans 2.1 v0.3 and i tried the 1.7pre2 apk and the 2.0pre8. With the 1.7pre2 it force closed at the SU request and 2.0pre8 it just doesn't show anything at SU request and somewhat freezes.
EDIT!!::: i have no idea why but my usb debugger setting got switched off so i switched it back on and i can start the program and it looks like it is working, but no wireless device ive tried can see the phone as a accesspoint. BTW now i am using the 1.7pre2 version
Click to expand...
Click to collapse
Make sure to check the settings in the app (menu). My laptop is able to the the access point and I connected to it.
This may be stupid question. But can verizon detect that your using this on your phone???
903tex said:
This may be stupid question. But can verizon detect that your using this on your phone???
Click to expand...
Click to collapse
no. the only thing verizon knows is how much data you use
Thanks. So may just go ahead and try this!!!
Im not sure what i have to change in the settings, but it looks like all the correct settings are on. Is there anything else i should check out?
ch4sethe5un said:
Im not sure what i have to change in the settings, but it looks like all the correct settings are on. Is there anything else i should check out?
Click to expand...
Click to collapse
Once in a while my laptop can't find it either so I do a combo of restarting the latop/phone/service until I get it all working together. If I am correct, the set up is a point to point network so how you are configured might effect it but I might be wrong. Another app that works pretty well for wifi tethering is aNetShare. One last thing, make sure that the app has SU permissions. If you can't get it to work, try figuring out variables, like do you have wifi/bluetooth/gps on? I have no clue if this effects anything, just tossing out ideas.
I can not download superuser whitelist from the market does anyone have a link to the apk? I get an error saying it is unsigned.
FireSokar said:
I can not download superuser whitelist from the market does anyone have a link to the apk? I get an error saying it is unsigned.
Click to expand...
Click to collapse
Go to home screen > menu > settings > applications > Check Unknown sources. Accept the prompt that comes up. Try the superuser whitelist again.
is there a limit to how much data i can use.. like with this tethering app.. will verizon charge me extra if i use alot of data with this program
If you aren't on a rom with ifconfig in /system/bin/ifconfig:
go to adb shell
get root (su)
type ln -s "/system/xbin/busybox ifconfig" /system/bin/ifconfig
That should clear it up.
ashertheplague said:
is there a limit to how much data i can use.. like with this tethering app.. will verizon charge me extra if i use alot of data with this program[/QUOTE
If you have an unlimited data plan on your phone, then no there is no limit to how much data your phone could use. Call Verizon and ask if you wanna be sure. BUT, you arent supposed to be using this data connection on your pc without adding the feature to your plan which is more money. So if you hook this up and start downloading/uploading large amounts of data (bittorent, video streaming, ect) then is POSSIBLE to get yourself into trouble as it would unusual for a phone to use gigs in gigs of bandwidth in a week.
Click to expand...
Click to collapse
zifnab06 said:
If you aren't on a rom with ifconfig in /system/bin/ifconfig:
go to adb shell
get root (su)
type ln -s "/system/xbin/busybox ifconfig" /system/bin/ifconfig
That should clear it up.
Click to expand...
Click to collapse
will this clear up my date usage??
Thanks:
Scary Alien for helping with some of my brainstorms
CPCookieMan for pointing me in the right direction with my initial thoughts for this project
MongooseHelix for the idea of the script vs a flashable zip
This is a very simple script that utilizes the radiooptions command to disable the radio but still allow use of WiFi without having to use airplane mode. Great for people who just upgraded and want to use their older device for an mp3 player with WiFi access. I wanted to make it to be run in init.d on startup but haven't successfully got it working that way yet so for now it can be run with script manager. This script can be run as follows:
1. Download the script and place it somewhere on your SD Card. (Maybe make a folder named Scripts to keep things organized)
2. Download Script Manager from the market.
3. Open Script Manager and navigate to where you saved the script then select the script.
4. Check the options for run as root and if you always use wifi only because you don't have service on your device check off Run at boot as well.
5. When prompted by superuser allow superuser permissions.
I have tested this script on my Incredible and my Eris as well and should be universal to run on any android device.
Download Here
If you are using this on an inactive device and don't want the activation screen coming up after reboot and new ROM flash follow these simple steps.
*NOTE: you need to be using a ROM that has EPST.apk in it for this procedure to work.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
cvbcbcmv said:
cool! Will this work on any rom? I guess it should. This is just what I've been looking for. I'm getting a second dinc to test roms, this won't be on a line so this will be perfect. I haven't flashed scripts before (however it sounds easy enough) is it easy to disable it?
Click to expand...
Click to collapse
Yes. It will work on any rooted device and any ROM. Just run through Script Manager and if you want to disable it change the settings within Script Manager to disable run on boot then reboot. It's that easy.
cvbcbcmv said:
hey, will this work on a nexus one? I'm getting one for rom testing instead of a second incredible, so, same deal. I would think this would work, but will it?
Click to expand...
Click to collapse
Yes.. It should work on any rooted device running any ROM. If you want to double check to be certain you can check inside the ROM for /system/bin/radiooptions, then you will know for certain it should work. The script uses that to shut down the radio.
Cool, almost makes me wish I would have kept my Eris.
tether?
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?
jumperalex said:
So can this allow us to tether the wi-fi only phone to our new network phone? the idea being to use the non-network phone to stream pandora, use google maps, etc?
Click to expand...
Click to collapse
Yes. That can be done or connected to a WiFi ap. Whatever you would like to do with it.
Sent from my ADR6300
Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.
Carnage9270 said:
Quick question, I have an old incredible with a cracked screen I wanted to turn into an MP3 player like youre suggesting here. How exactly do I download from the market on a deactivated phone? Can't get past setup without the phone being activated.
Click to expand...
Click to collapse
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300
CondemnedSoul said:
There is a way to get past that using ##778. I don't remember without going through it exactly what in all to do but i have a link at home
On ny comp and I can add the details when i get home.
Sent from my ADR6300
Click to expand...
Click to collapse
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.
Carnage9270 said:
Actually got through it by pressing activate and cancelling several times. It finally just bypassed it. Thanks for the script, working perfectly.
Click to expand...
Click to collapse
Doing that will work but next reboot you'll probably get the activation screen again. If not you'll get it again after another ROM flash but it will come back at some point. I think I noticed on my Eris it was after a reboot. This procedure below got rid of it permanently.
1. Select emergency call and dial ##778.
2. Select edit and enter service password 000000.
3. Select NAM Settings.
4. Change Mobile Directory number to 0000000000 (Ten digits).
5. Change MIN1 to 0000000 (Seven digits).
6. Change Mobile Country Code to 000 (Three digits).
7. As you back out "Commit the Change".
Then you shouldn't be prompted to activate again even after a new ROM is flashed
Just to be sure, is this reversible? Say if I needed to reactivate the the phone?
slow88lx said:
Just to be sure, is this reversible? Say if I needed to reactivate the the phone?
Click to expand...
Click to collapse
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300
CondemnedSoul said:
Absolutely. Simply open script manager and disable run on boot. You can then remove the script from your SD card.
Sent from my ADR6300
Click to expand...
Click to collapse
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.
jermaine151 said:
Would they have to undo your other step from here? http://forum.xda-developers.com/showpost.php?p=16714569&postcount=12
Just asking before someone else does.
Click to expand...
Click to collapse
Good point . No they won't. Dial *228 option 1. It will ask for the phone number you want to activate and that stuff will be done ota. That's how I activated my Eris with a different number as well. I would suggest making sure to do that from a stock or stock based ROM as well.
Sent from my ADR6300
Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native
lordc said:
Hi!
Just a question? It isn't easir just use airplane mode + wifi on? on my CM7 nightly i can do it and runs fine. CM7 also remebers the last radio mode after hot reboot.
Sorry for my english. I'm not native
Click to expand...
Click to collapse
That is also an option to this script. Not everyone likes the airplane mode method for one reason or another though so this is an alternative for those people.
You're English isnt bad. I've seen natives with much worse and wouldn't have known you weren't
Sent from my ADR6300
I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?
hasseye said:
I have the HTC Evo View 4G that I did this too, but for some reason when I ran the script I got the signal bar with an x through it saying "looking for service". Isn't it when it looks for service it's draining the battery more? Isn't there anyway to completly remove the signal bars?
Also, I'm trying to remove the activation upon startup, but the View doesn't have a phone to it. is there any other way to disable the activation throuhg the registry or something?
Click to expand...
Click to collapse
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%
4218kris said:
i think your right when you also go to battery it say cell standby is using alot of power mine was aroun23%
Click to expand...
Click to collapse
It shouldn't be searching for service with the script running. Do you have the radiooptions command in system/bin? Apparently there are some roms around that do not.
Sent from my ADR6300
I'm confused....I have a non activated incredible that I use at work connected to wifi every day and i've never done anything special to it besides rooting and different roms...am i missing something here?
Hi. This post is for those that don't want to root (if you are already rooted you can still follow this) but want hotspot. This method is similar to the LG G3 but some how works on the LG G4 without root.
I made a video. Enjoy.
https://youtu.be/j3Di9d7w1so
It's safe to upgrade to ZVB as long as you do the trick below.
Some good news, a few people have figure out a way to keep the tethering. It requries you to downgrade back to LP (if you are on marshmallow)
(Directions created by Bombillazo, thanks to antonio824
1) On ZV6, used the steps to get to IOT menu to change APN settings.
2) Selected LTE settings > APN settings. Open the App close button (square one on the bottom menu) and check that you have separate instances for the ITO and APN menu. THIS IS CRITICAL DO NO CLEAR THEM OR CLEAR ALL!
3) Applied the MM update (ZV9 and or ZVA).
4) Let the upgrade finish and reboot.
5) When finished press the square button again and go to the APN settings window. You should be able to select the n.ispsn APN again and add dun to APN type. (NOTE: IOT will close if you select it but it doesn't matter. The important one is the APN settings window).
6) Congrats! You have Wifi tethering with MM!
7) Just in case you wanna test like I did, don't close the APN settings window and try to update system stuff to see if it changes the APN settings. I can confirm that updating your profile on the System Updates menu will undo the APN type change.
In MM, you can pin apps to the recents menu so it can't be cleared by "clear all"
Welp, this is the end folks, the new Marshmallow update (ZV9) has patched this trick. Feel free to try it to make sure but as far as I know, it doesn't work. Had a great run!
omfg i love you.
Thanks so much! Now unlimited data has a proper use
Just going to add, if, after enabling tethering, you get a popup saying "Due to network issues, tethering has been disabled, go through the same steps and select cinet.spcs instead of internet in the APN settings.
Sent from my LGLS991.
Oh. Ill add that to my video description.
What app are you using to open hidden menu?
tabp0le said:
What app are you using to open hidden menu?
Click to expand...
Click to collapse
Name: Quick Shortcut Maker
Price: Free
https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut
Sent from my LGLS991 using XDA Free mobile app
Thank you!!! works like a charm.
andrewwm said:
Hi. This post is for those that don't want to root but want hotspot. This method is similar to the LG G3 but some how works on the LG G4 without root.
I made a video. Enjoy.
https://youtu.be/j3Di9d7w1so
Click to expand...
Click to collapse
Thanks!
Procedure worked great.
Verified connecting my laptop to phone via tether.
It was slow to load up pages, but it worked. Ill have to try again later.
vapore0n said:
Procedure worked great.
Verified connecting my laptop to phone via tether.
It was slow to load up pages, but it worked. Ill have to try again later.
Click to expand...
Click to collapse
Good to hear!
Worked Like a Charm
Fantastic! Thank you!
This is awesome....No root required thanks...you guys rock....
Bravo
Bravo comrade
I kept holding off on this because I thought it would somehow be hard. But wow so easy and quick, should have done this as soon as you did the video, nice work!
Confirmed working. That video couldn't have been more straight forward to the point. Thank you.
Thank you, thank you.
andrewwm said:
Hi. This post is for those that don't want to root but want hotspot. This method is similar to the LG G3 but some how works on the LG G4 without root.
I made a video. Enjoy.
https://youtu.be/j3Di9d7w1so
Click to expand...
Click to collapse
You are the man. Awesome and easy to do. :laugh::fingers-crossed::laugh:
As far as I can tell this just bypasses the check to see if tethering is enabled on your plan. Can't they still tell that the data traffic is tether traffic? After all it does show up under mobile data as "Tethering and hotspot"
I don't think they even check if the data is coming from tethering or phone use. How do custom roms work? They just enable hotspot without checking same here.
I'm not worried about Sprint monitoring data usage... Normally I hover around 10-15Gb per month usage, with a moderate amount of tethering. But about two years ago, I used a Galaxy Nexus hotspot as my home internet for about 9 months with no issues. Downloading ISOs, streaming, VoIP, etc. Regularly over 100Gb usage, never a peep. Stopped doing it because I got sick of listening to my wife complain about having to restart the phone every few days. In retrospect I should have just put a tasker script on there to reboot it nightly and toggle the hotspot back on.....
Didnt see anybody make a post about this so I figure I would post a new thread. Is anybody missing the data toggle button? I know Samsung is natorious are not putting them in but I believe in some of the other note 7 forums people have the data toggle in the quick panel.
Riswthefalln said:
Didnt see anybody make a post about this so I figure I would post a new thread. Is anybody missing the data toggle button? I know Samsung is natorious are not putting them in but I believe in some of the other note 7 forums people have the data toggle in the quick panel.
Click to expand...
Click to collapse
The toggle is hidden, but you'll need Nova launcher or App Shortcut Maker. Here's the thread on it:
http://forum.xda-developers.com/tmobile-note-7/help/q-volte-settings-t3443296
And here's the detailed instructions from the thread above:
http://forum.xda-developers.com/showpost.php?p=68308726&postcount=20
I don't know why you'd need to toggle mobile data, though, as that's what airplane mode is for.
Settings>connections>Data usage
-BoneZ- said:
The toggle is hidden, but you'll need Nova launcher or App Shortcut Maker. Here's the thread on it:
http://forum.xda-developers.com/tmobile-note-7/help/q-volte-settings-t3443296
And here's the detailed instructions from the thread above:
http://forum.xda-developers.com/showpost.php?p=68308726&postcount=20
I don't know why you'd need to toggle mobile data, though, as that's what airplane mode is for.
Click to expand...
Click to collapse
Except airplane mode effectively disables all signal transmissions. Wifi Bluetooth and gps included.
Talking about that data toggle. its more convenient to just swipe down and press the button vs going to settings connections then data.
Ya I noticed earlier today that the mobile toggle wasn't available as a quick toggle. Unfortunately without root, I doubt you can add it in. I remember adding it on my note 4.. I cant remember the exact way I added it back it because it's been so long. All you do is add the " ;mobile data " to where all the another toggles were listed.
Is VOLTE/SMS working with mobile data off? Because that maybe a reason to restrict mobile data in some other ways. I think my phone is factory set not to update unless on wifi and even if I go to play store myself, when on LTE, it will give me warning about large file download over cell network, which I would have to override, to actually start the download. Other traffic is miniscule, couple Kb here and there, but it is interesting that programs I haven't used for days still access network. Another reason to keep asking Google to make forcestop apps easier? The left button to close all apps is a step in right direction, but I'm not sure what it does (just makes you feel better?), because apps still running in the background and can be killed. Maybe word "closing" has a different meaning at Google, that I'm used to.
Please see this thread by a recognized developer i met over on the LG V20 side of things,
Went ahead and tested it against the note 8 without root, you do have to send 3 strings ( Now just 1 set! )of commands via ADB to get it working but this is a one time thing.
This is practically the UITuner android builds into their software and the OEMs seem to kill it for whatever reason. Go to to his thread to check it out and show him some love and thanks. The app is available for free in the google play-store as well.
Practically can be done by a toddler as long as you follow the steps the app asks you to do! Very Simple and super useful!
XDA THREAD : https://forum.xda-developers.com/android/apps-games/app-systemui-tuner-t3588675
Playstore Link: https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner&hl=en
Developer info : @Zacharee1
Team DevDigitel said:
Developer info : @Zacharee1
Click to expand...
Click to collapse
Have you found anything this cannot do yet? Meaning, from the screenshots on the Play Store, it says some status bar icons cannot be disabled by Samsung phones, have you found that to be true on the Note8 yet? I have the phone but I haven't installed this yet, was looking for a solid solution to removing the useless NFC icon that Samsung always displays, as well as a way to change the awful Bluetooth icon to the AOSP (or as similar as possible) version.
Thanks!
I'm with you man... I hate having the alarm icon on all the time. I know, I know... I ALWAYS have an alarm set!
My note8 doesn't show NFC icon or alarm icon. I use timely so maybe that's why it does show up when I have pending alarms coming up or snoozed iirc. Sprint n8 if that matters
Sent from my SM-N950U using Tapatalk
Team DevDigitel said:
Please see this thread by a recognized developer i met over on the LG V20 side of things,
Went ahead and tested it against the note 8 without root, you do have to send 3 strings of commands via ADB to get it working but this is a one time thing.
This is practically the UITuner android builds into their software and the OEMs seem to kill it for whatever reason. Go to to his thread to check it out and show him some love and thanks. The app is available for free in the google play-store as well.
Practically can be done by a toddler as long as you follow the steps the app asks you to do! Very Simple and super useful!
XDA THREAD : https://forum.xda-developers.com/android/apps-games/app-systemui-tuner-t3588675
Playstore Link: https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner&hl=en
Developer info : @Zacharee1
Click to expand...
Click to collapse
ADB went smooth and I was able to tweak the pull down toggles but volume warning still happens, and it was switched off by default? This is what really bugs me and I want turned off!
xbmoyx said:
ADB went smooth and I was able to tweak the pull down toggles but volume warning still happens, and it was switched off by default? This is what really bugs me and I want turned off!
Click to expand...
Click to collapse
I hate it too. I understand when you get that msg with headphones but why I get it with my damn car BT! There was an article at xda that you can turn it off with AutoTools and some ADB commands, but that is not working with Samsung devices at least for me with S7E atm. I manage to fix it with Tasker and AutoInput.
mk89pwnz said:
I hate it too. I understand when you get that msg with headphones but why I get it with my damn car BT! There was an article at xda that you can turn it off with AutoTools and some ADB commands, but that is not working with Samsung devices at least for me with S7E atm. I manage to fix it with Tasker and AutoInput.
Click to expand...
Click to collapse
Yeah I saw that but its way too complicated just to stop this minor annoyance, I will just deal with it I guess....
Best app i've seen for Note 8 thusfar. Thank you
Sent from my SM-N950U using XDA-Developers Legacy app
Mine cannot hide carrier id, both standard and auto-detect mode it's N950N.
Thanks Zachari! This app got me to get rid of the annoying heads up. But I think something went wrong with the display settings. The screen does not go off by itself. I mean the time out does not work.
Can anyone help?
By the way m using Galaxy S8 Plus.
This is a great app for the note8. Nfc, alarm icons gone. The screen rotation icon will show up so had to turn that off too. Bummer that the volume warning does not work. Can also adjust the number of quicksetting columns. Donated to the developer.
Sent from my SM-N9500 using Tapatalk
I must be retarted, but I can't get the ADB to work with Windows 10 Powershell. Anyone care to help?
I uninstalled the App and now my Notification pulldown icons are all black. Even after applying the default theme for the Note8 the icons are all white and still can't see them. How do you get the icons colors to show back up properly? I booted into stock recovery and did a cache partition wipe hoping how would fix it and no dice. Any help is appreciated.
Used it with the S8+ and the Note 8 to get rid of the battery icon. On the T-Mobile G1 ADB was the only way to get anything done, even a screenshot.
It's a great app I use it for my toggles and hiding my battery symbol and the immersive mode, can't wait for the volume warning to work on the Note 8 though
xbmoyx said:
I uninstalled the App and now my Notification pulldown icons are all black. Even after applying the default theme for the Note8 the icons are all white and still can't see them. How do you get the icons colors to show back up properly? I booted into stock recovery and did a cache partition wipe hoping how would fix it and no dice. Any help is appreciated.
Click to expand...
Click to collapse
I was able to get the status bar icons to show back up by installing the app again and using adb on my desktop, but the question remains how do you completely uninstall this app and go back to stock settings? Is the only way to do a factory reset?
fireattack7 said:
I must be retarted, but I can't get the ADB to work with Windows 10 Powershell. Anyone care to help?
Click to expand...
Click to collapse
You need to use CMD lol
Interceptor777 said:
You need to use CMD lol
Click to expand...
Click to collapse
I tried via CMD as well.
fireattack7 said:
I tried via CMD as well.
Click to expand...
Click to collapse
You you have android adb installed or easy adb installed on your pc?
https://forum.xda-developers.com/showthread.php?t=2771417
doesn't hide the wifi calling icon either. Its still one of my favorite apps to use. between this, substratum and bx actions, I can live without root on a samsung