Database Develop

Sprint Hero Mobile data toggle??

Is there a reason why they have not created a Mobile Data Toggle on/off switch for the none rooted Hero using either ADW or LauncherPro UI other than the only option of using the end button and scrolling down to turn it off

DonB. said:
Is there a reason why they have not created a Mobile Data Toggle on/off switch for the none rooted Hero using either ADW or LauncherPro UI other than the only option of using the end button and scrolling down to turn it off
Click to expand...
Click to collapse
All 3rd party widget apps say it's because it requires system access or something to that extent. There is one app that can do it. Download JuiceDefender. If you don't care for its battery saving functions, just open the app and disable it. After it's installed though, you can add a "Toggle mobile data" widget which acts just the way you want.

On stock running sense you can hold the power button and toggle it on it off by selecting mobile network

damiandarkwater said:
On stock running sense you can hold the power button and toggle it on it off by selecting mobile network
Click to expand...
Click to collapse
I already mentioned that at the end of my post, LOL which is not what I want to do as it is a 2 step process, which becomes a PITA

c00ller said:
All 3rd party widget apps say it's because it requires system access or something to that extent. There is one app that can do it. Download JuiceDefender. If you don't care for its battery saving functions, just open the app and disable it. After it's installed though, you can add a "Toggle mobile data" widget which acts just the way you want.
Click to expand...
Click to collapse
I did install JuiceDefender a couple of days ago but cannot get the data stream to work, it is X out, any suggestions on how to get it to work, again remember I am on Sprint, I sent the developer an email but have not received a reply from him as of yet

I use a widget called smoda widget from the market. That takes care of it. I think it needs root I forget.
Sent from my HERO200 using XDA App

DonB. said:
I did install JuiceDefender a couple of days ago but cannot get the data stream to work, it is X out, any suggestions on how to get it to work, again remember I am on Sprint, I sent the developer an email but have not received a reply from him as of yet
Click to expand...
Click to collapse
Basically, just disable JuiceDefender. Then add the "Toggle mobile data" widget to your homescreen! You don't have to fiddle with JuiceDefender if you don't need it. Just use the toggle widget

DonB. said:
I already mentioned that at the end of my post, LOL which is not what I want to do as it is a 2 step process, which becomes a PITA
Click to expand...
Click to collapse
Oh yeah... sorry for spacing on that.>.< Well it works. I'll keep looking into this.

Thanks bro works, many will be happy about this, I will credit you in the post when I do a follow up in another forum
c00ller said:
Basically, just disable JuiceDefender. Then add the "Toggle mobile data" widget to your homescreen! You don't have to fiddle with JuiceDefender if you don't need it. Just use the toggle widget
Click to expand...
Click to collapse

Well like I mentioned I got it working, but here is the kicker I am not sure it does what it is suppose to do, I turn the data off and I can still surf the web, check email, LOL I thought it stopped all data, am I missing something??
OOPs my bad, edited, I forgot to turn Wifi off, lmao

Come on now DonB, we've been over this lol

DonB. said:
Well like I mentioned I got it working, but here is the kicker I am not sure it does what it is suppose to do, I turn the data off and I can still surf the web, check email, LOL I thought it stopped all data, am I missing something??
Click to expand...
Click to collapse
Hmm that is def strange, it's not doing that for me. When you turn data off, do you see the Ev status icon next to status bars disappear? They should!

c00ller said:
Hmm that is def strange, it's not doing that for me. When you turn data off, do you see the Ev status icon next to status bars disappear? They should!
Click to expand...
Click to collapse
I added a OOPs to my post, I had Wifi on,LOL, but I do have a question for you, I tried putting the widget on another page, as I am not crazy about the icon, but when I do put it on another page, I cannot get the JD icon off the notication bar, even when disabled, any clue, can you try it, I assume it has to be on the home screen

Open the main app, on the bottom click on Advanced mode if you haven't yet. On the top to the right Disabled/Enabled click on Notification. Notification is an option only if JD is enabled. If JD if disabled you shouldn't see the notification icon. Note, JD being on and Data being on are 2 different things, you follow?

Thanks Bud !!
c00ller said:
Open the main app, on the bottom click on Advanced mode if you haven't yet. On the top to the right Disabled/Enabled click on Notification. Notification is an option only if JD is enabled. If JD if disabled you shouldn't see the notification icon. Note, JD being on and Data being on are 2 different things, you follow?
Click to expand...
Click to collapse

Disable LTE

i miss the quick access to disable my mobile data/LTE/4G connection on the S5. S4 had it right at the top. Best i can find is a widget called 'Data ON-OFF'. Couple other apps/widgets would turn it off, but not back on. i would have to go into the settings, more networks, mobile networks, and check the box by mobile data.
anyone know of a way to get this in the drop down menu in the top? On the S4 it was just a swipe and touch on the 'mobile data' button.

ngravatt said:
i miss the quick access to disable my mobile data/LTE/4G connection on the S5. S4 had it right at the top. Best i can find is a widget called 'Data ON-OFF'. Couple other apps/widgets would turn it off, but not back on. i would have to go into the settings, more networks, mobile networks, and check the box by mobile data.
anyone know of a way to get this in the drop down menu in the top? On the S4 it was just a swipe and touch on the 'mobile data' button.
Click to expand...
Click to collapse
Not w/o root access. You can follow these steps though:
http://forum.xda-developers.com/showthread.php?t=2713752

thanks. widget works pretty good, just have to exit the program instead of bringing down the drop down menu. its like AT&T wants you to use up your data plan

I always use *#*#4636#*#*
Sent from my SAMSUNG-SM-G900A using Tapatalk

yes, follow this tutorial http://forum.xda-developers.com/showthread.php?t=2721550
And it will add the disable/enable data to your notification panel and quick toggles. Some carriers have removed that quick toggle from the panel.
Note that this will just disable/reenable all data, if you need to specifically disable like LTE only and fall back to 4G, you will need a app like phone info from the app store.
ngravatt said:
i miss the quick access to disable my mobile data/LTE/4G connection on the S5. S4 had it right at the top. Best i can find is a widget called 'Data ON-OFF'. Couple other apps/widgets would turn it off, but not back on. i would have to go into the settings, more networks, mobile networks, and check the box by mobile data.
anyone know of a way to get this in the drop down menu in the top? On the S4 it was just a swipe and touch on the 'mobile data' button.
Click to expand...
Click to collapse

disable LTE
risestar2 said:
yes, follow this tutorial http://forum.xda-developers.com/showthread.php?t=2721550
And it will add the disable/enable data to your notification panel and quick toggles. Some carriers have removed that quick toggle from the panel.
Note that this will just disable/reenable all data, if you need to specifically disable like LTE only and fall back to 4G, you will need a app like phone info from the app store.
Click to expand...
Click to collapse
But with our AT&T phones not able to root would we be able to do that? In the tutorial it mentions needing root. Thats why I am asking

Yeah, I forgot that you are all locked sown on AT&T variants. You'll need to wait for a root method and then this will work.
dcarlson01 said:
But with our AT&T phones not able to root would we be able to do that? In the tutorial it mentions needing root. Thats why I am asking
Click to expand...
Click to collapse

I use tasker to automate that for specific situations where I have wifi not sure if that helps
Sent from my SAMSUNG-SM-G900A using xda app-developers app

This section is for the posting of themes and apps
Please take all questions to the Q&A section
Thread moved
Thanks
FNSM

[Q] tasker WiFi tether control

I'm trying to enable WiFi tether with tasker for arunchained. I have the secure settings app and it doesn't toggle WiFi tether. It comes up as an error when running the task. Anyone have any luck with this?

Same issue here and have seen it on several other threads..... have not seen a solution to this yet. I've used Tasker and Trigger in the past with no problems, but can't get either to turn Hotspot on/off.

Strange...
I just tried with both the built in Tasker toggle and Secure Settings and both times Wi-Fi Hotspot turned on without a problem.
What's the error?

Didgeridoohan said:
Strange...
I just tried with both the built in Tasker toggle and Secure Settings and both times Wi-Fi Hotspot turned on without a problem.
What's the error?
Click to expand...
Click to collapse
Are you running stock? What gives I have to use a convoluted autoinput task to do this. Secure settings doesn't work at all on 5.1.1 for me.

devytrip said:
Are you running stock? What gives I have to use a convoluted autoinput task to do this. Secure settings doesn't work at all on 5.1.1 for me.
Click to expand...
Click to collapse
I'm running stock and always have, prefer vanilla Android.
As to Secure Settings not working on 5.1.1, I wouldn't know since I haven't used it in some time. Last time probably was just prior to posting in this thread (almost 4 months ago).
Sorry, no help here...

[SOLUTION]
@goinflyn
@robbieas
@Didgeridoohan
@devytrip
I found a wrokaround that allows you to still tether automatically with Tasker. I posted my results here in the Tasker Groups page. More or less you simulate screen taps to use the standard phone quick setting in the notification pulldown window. Send a PM or hit me up on Hangouts if you need any help figuring it out.

Thanks @andrewjt19 I'll have to give this a go later! I actually found an app that will toggle Wi-Fi tether automatically, but it is paid. I wonder what method the app uses to do it, I never checked on a debugger and I'm not even sure I would know what I am looking at. It is a shame to have to pay for something that should be such a simple procedure.
The app is called toggle WiFi hotspot 5.0 by Erwin Goslawski.

devytrip said:
Thanks @andrewjt19 I'll have to give this a go later! I actually found an app that will toggle Wi-Fi tether automatically, but it is paid. I wonder what method the app uses to do it, I never checked on a debugger and I'm not even sure I would know what I am looking at. It is a shame to have to pay for something that should be such a simple procedure.
The app is called toggle WiFi hotspot 5.0 by Erwin Goslawski.
Click to expand...
Click to collapse
I found this widget and bought it too. It works well. I guess I'm glad I found an alternative methods of this stops working at some point. The only downside to my method is that the screen must be on and off the user is interacting with the device when the script runs, it could interfere this not activating the intended purpose. But overall it's simple and efficient. Thanks for sharing this widget though.
taPpeD fROM my nExUs 6

I had been having this problem on my 5x and just found a solution with xposed. I installed the xposed module 'x tether' which says it enables tethering for the moto x phones and afterwards tasker is able to enable / disable the wifi hotspot. This is the first thread that came up on google when I searched for this problem so I thought I would post here in case someone else encounters the same problem.

Q's lots of: Oreo can't figure out, find stuff, or how to do stuff. Ongoing.

N6 Oreo 8.1 [AOSiP-8.1-Official-shamu-20180617] TWRP & open_gapps-arm-8.1-micro-20180623.
Can't find Google icon in app drawer. How do I get the Google icon in app drawer?
How can I enable Double Tap to Wake?
I have other questions but I've been tweaking hard on rooting this, exploring & trying to figure N6 (new to me) & Oreo.
So I'll add other questions.
Almost all my progress so far due to ktmom, & Strephon Alkhalikoi. Starting here:
https://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481/page93
Post #928
Done a lot of searching, figuring & fixing on my own as well.

"Can't find Google icon in app drawer. How do I get the Google icon in app drawer?"
Use a different OpenGApps package.
"How can I enable Double Tap to Wake?"
Search for a mod to enable it. I'm not familiar with the ROM you're using - I use Nitrogen - so I don't know if there is a setting for it built in to the ROM.

Most kernel apps such as ka mod, or ex manager will enable what your looking for. Being you are running aosip its cooked with ex kernel which has double tap to wake. As far as Google...maybe try different gapps.

Let me also suggest that you read through the thread where the ROM was downloaded as there is always gems hidden away.
And I kinda suggest that using the stock open Gapps package with a config file to prevent the install of unwanted apps help you ensure all of the frameworks you need are installed.
You can create the config file as outlined in the open Gapps wiki I linked to in the other thread and then reboot to recovery and flash the new Gapps setup. The install script will remove the old packages and install the new ones based on any config file available.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

Well I kinda solved the missing Google icon in app drawer. I'm using the evie launcher.
I searched the other thread for key words knock & double. No soap.
BobAzzon said:
Most kernel apps such as ka mod, or ex manager will enable what your looking for. Being you are running aosip its cooked with ex kernel which has double tap to wake. As far as Google...maybe try different gapps.
Click to expand...
Click to collapse
And so how would I enact double tap?
ktmom said:
....And I kinda suggest that using the stock open Gapps package with a config file to prevent the install of unwanted apps help you ensure all of the frameworks you need are installed.
You can create the config file as outlined in the open Gapps wiki I linked to in the other thread and then reboot to recovery and flash the new Gapps setup. The install script will remove the old packages and install the new ones based on any config file available....
Click to expand...
Click to collapse
Would I lose my non-Gapp apps?
I have searched, searched & continue to search for the double tap to wake solution. In case I'll add I'm using a locking pattern for security. On my LG G Flex that didn't affect Knock On.
I appreciate all of you.

zapjb said:
Well I kinda solved the missing Google icon in app drawer. I'm using the evie launcher.
I searched the other thread for key words knock & double. No soap.
And so how would I enact double tap?
Would I lose my non-Gapp apps?
I have searched, searched & continue to search for the double tap to wake solution. In case I'll add I'm using a locking pattern for security. On my LG G Flex that didn't affect Knock On.
I appreciate all of you.
Click to expand...
Click to collapse
DT2W [emoji6]
Settings -> OwlsNest -> Gestures
No, as long as the data partition is not getting wiped, you won't lose play store apps. And there's no reason to wipe any partition for this exercise. The ones you flash in recovery go to system.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

ktmom said:
DT2W [emoji6]
Settings -> OwlsNest -> Gestures
No, as long as the data partition is not getting wiped, you won't lose play store apps. And there's no reason to wipe any partition for this exercise. The ones you flash in recovery go to system....
Click to expand...
Click to collapse
I have Double Tap to Sleep not Wake. So I'll happily ask for more ideas for that.
I imagine I will take your suggestion to flash stock open Gapps & write a create the config file as outlined in the open Gapps wiki. Not quite yet. I want to transfer my pdf, epub, photos, vids, get shortcuts sorted & just get used to my N6 before that.

zapjb said:
I have Double Tap to Sleep not Wake. So I'll happily ask for more ideas for that.
I imagine I will take your suggestion to flash stock open Gapps & write a create the config file as outlined in the open Gapps wiki. Not quite yet. I want to transfer my pdf, epub, photos, vids, get shortcuts sorted & just get used to my N6 before that.
Click to expand...
Click to collapse
Yes, sorry you're right. I don't use that. It's possible it's activated through a kernel app.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

ktmom said:
....It's possible it's activated through a kernel app....
Click to expand...
Click to collapse
So I'd have to flash the specific kernel? Anybody got this licked with a specific kernel please let me know.
How do I turn off cellular data? I don't see a data icon in the notification bar. There is a wifi icon but whenever I turn off wifi cellular data starts up. I don't want that.
Do I need Titanium Backup to disable system apps? For instance I don't like the default file manager. Or is this an instance for reflashing open Gapps editing out the File manger in the config file?
What is the best way to disable ads systemwide? I'm using Blockada. Or is Adaway, Ablock or something else the way to go?
Frozen Bubble, the most basic of shooters is slow as heck. Anyway to fix this?
http://www.frozen-bubble.org/
Thanks ktmom & others.

zapjb said:
So I'd have to flash the specific kernel? Anybody got this licked with a specific kernel please let me know.
Click to expand...
Click to collapse
The AOSiP room comes with Elemental Ex kernel. Look at settings -> System -> About phone. I don't bother but I believe you can just install the Ex kernel app to manage settings. You'll need to read an Ex kernel thread.
zapjb said:
How do I turn off cellular data? I don't see a data icon in the notification bar. There is a wifi icon but whenever I turn off wifi cellular data starts up. I don't want that.
Click to expand...
Click to collapse
User the [emoji422]️ icon in the settings bar to edit the quick tiles and add the mobile data quick tile. The toggle is also in Settings -> Network and Internet -> Mobile Network
zapjb said:
Do I need Titanium Backup to disable system apps? For instance I don't like the default file manager. Or is this an instance for reflashing open Gapps editing out the File manger in the config file?
Click to expand...
Click to collapse
Settings-> Apps -> Files
That's a better approach so when you discover it's needed for file browsing in another app it's easier to re-enable.
zapjb said:
What is the best way to disable ads systemwide? I'm using Blockada. Or is Adaway, Ablock or something else the way to go?
Click to expand...
Click to collapse
Any of those are commonly used. They all have thread where their pros/cons are discussed.
zapjb said:
Frozen Bubble, the most basic of shooters is slow as heck. Anyway to fix this?
http://www.frozen-bubble.org/
Click to expand...
Click to collapse
I have no idea. Maybe it's not optimized for Oreo, maybe another app or mod is conflicting, maybe battery optimization needs to be turned off.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

ktmom said:
....User the [emoji422]️ icon in the settings bar to edit the quick tiles and add the mobile data quick tile. The toggle is also in Settings -> Network and Internet -> Mobile Network
"Originally Posted by zapjb
Do I need Titanium Backup to disable system apps? For instance I don't like the default file manager. Or is this an instance for reflashing open Gapps editing out the File manger in the config file?"
Settings-> Apps -> Files
That's a better approach so when you discover it's needed for file browsing in another app it's easier to re-enable.....
Click to expand...
Click to collapse
I have a replacement File Manager (OSS). So I'd like to disable (disappear it from app drawer) or uninstall it.
Thanks for notification dragging tip. As far as ad blocker using Netguard from XDA through F-Droid. Had a scare optimized everything for battery usage. Stuck at Google screen. Held power button till off, turned on undid what I did OK so far.
OH btw I have sort of double/triple tap to wake thing working. Doesn't always work. And it's always proceed by picking up or turning over the phone & the ROMs crossing swords clock popping up 1st. Then I tap away & get to the lockscreen. Not sure what I did.
What happens if I do a Factory Reset? I know all data gets wiped. But does it stay Rooted, on the Same ROM with the same open GAPPS? And if I do a Nandroid & restore it is it Exactly the same?

zapjb said:
I have a replacement File Manager (OSS). So I'd like to disable (disappear it from app drawer) or uninstall it.
Click to expand...
Click to collapse
If I want to disable a system app and going to Settings --> Apps & Notifications --> All Apps --> App Name doesn't offer the option to disable I use Titanium Backup as you mentioned.
zapjb said:
OH btw I have sort of double/triple tap to wake thing working. Doesn't always work. And it's always proceed by picking up or turning over the phone & the ROMs crossing swords clock popping up 1st. Then I tap away & get to the lockscreen. Not sure what I did..
Click to expand...
Click to collapse
Try installing EX Kernel Manager and going to Gestures and enabling Double Tap2Wake. If support for DT2W is built into your current Kernel as previously mentioned then that should enable it.

I think I have DT2W sussed. If lay down the N6 on it's front & then turn it over DT2W works perfectly.

zapjb said:
...
Had a scare optimized everything for battery usage. Stuck at Google screen. Held power button till off, turned on undid what I did OK so far.
...
What happens if I do a Factory Reset? I know all data gets wiped. But does it stay Rooted, on the Same ROM with the same open GAPPS? And if I do a Nandroid & restore it is it Exactly the same?
Click to expand...
Click to collapse
Battery optimization is the same as "doze". It's a feature to help reduce the drain apps can make on the battery. The only apps I manually have set to not optimized are Tasker, k9 mail, Termux (because it has some long scripts that run overnight) and Auto tools plug-in to Tasker.
If you factory reset, only data, cache and dalvik are wiped. This is true whether the wipe is done through the ROM in settings, or using the default factory reset through TWRP. Any apps installed to system (e.g. the open gapps you flashed with the ROM) will still be available. Root, because it's installed into the boot partition, will still be available. But the root app (e.g. Magisk manager) will need to be reinstalled after boot. All user apps, which are installed into the data partition will be wiped as well as updates to the apps on system that were downloaded from the play store.
zapjb said:
I think I have DT2W sussed. If lay down the N6 on it's front & then turn it over DT2W works perfectly.
Click to expand...
Click to collapse
The DT2W is tied to the gesture "lift to check" (settings->display->advanced->ambient display). I *think* this association is required because of changes in the Google code that prevent apps from doing (certain) things with the display off.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

alryder said:
If I want to disable a system app and going to Settings --> Apps & Notifications --> All Apps --> App Name doesn't offer the option to disable I use Titanium Backup as you mentioned....
Click to expand...
Click to collapse
MyBackup Root (Rerware, LLC) also Freezes Systems. That's what I'm using now.
SOLVED: How do I know my battery is turbo charging?
Edit: Just saw a reading on the screen, "Charging Rapidly".
Just got the Motorola SPN5970A TurboPower 15+ QC3.0 Wall Charger with SKN6461A USB-A to micro USB cable.
It is backwards compatible for the N6 superseding the included OEM charger. Used once so far & I did not time the charging time.
https://www.amazon.com/Motorola-SPN5970A-TurboPower-SKN6461A-Packaging/dp/B071HYYB4P
Got it on eBay New bulk packaging $12.95 otd seller dvcomllc_usa Item# 173353402413
Thanks again all XDA'ers.

How do I assign Speed Dial #s?
When I long press a # I don't even get "no number has been assigned to this speed dial".
All I found so far are stupid Favorites or make a shortcut for a contact. If there's no Speed Dial that's REALLY stupid.
Thanks all.

zapjb said:
How do I assign Speed Dial #s?
Click to expand...
Click to collapse
You don't. That is what Favorites are for, as they are more efficient than speed dial. In fact, the dialer has never had speed dial. The only long press button is the number 1, and that is set for your voicemail.

Strephon Alkhalikoi said:
You don't. That is what Favorites are for, as they are more efficient than speed dial. In fact, the dialer has never had speed dial. The only long press button is the number 1, and that is set for your voicemail.
Click to expand...
Click to collapse
I was afraid of that.
Why not offer both? Grrr frusty Speed Dial is easier for me. I don't want to look at Favorites. I want to open the Dialer & long press a number.
For instance in Speed Dial I'd assign 3-5 #s for personal contacts & 3 #s that are shtf #s.
I don't want to even think of the shtf #s let alone look at them in a Favorites page.
But when the shtf I just want to long press a #.

zapjb said:
Why not offer both?
Click to expand...
Click to collapse
Because speed dial is woefully inefficient and unnecessary on a smartphone. Dumbphones need it because they lack a quick method of dialing a desired number. With a smartphone, you have your most frequently dialed numbers on the Favorites page, with no need to remember which number a particular contact is located at. A tap on their picture and you've dialed them, and more quickly than with a long press of a digit.

Strephon Alkhalikoi said:
Because speed dial is woefully inefficient and unnecessary on a smartphone....
Click to expand...
Click to collapse
I find Speed Dial necessary.
I don't want to look at shtf #s on a Favorites page while calling my happy, happy, joy, joy friends & family.
But when the shtf & I need to give/receive help I just want to long press a #.

Add mobile data toggle

So does anyone know how to add the mobile data toggle into the pulldown where all the other toggles are? I was able to do it with some adb commands but after upgrading to oreo I now get a syntax error when trying to do it. I have att note 8 and they like to hide the toggle. If there is someone with a different note 8 and knows how to use adb do you mind helping me out and pull the stuff from your phone? If yes leave a comment and I'll post what you need to do. I am not rooted so I need to do the adb. Thanks

In my phone it's there as standard. UK Note 8 Oreo

Yeah, you just need to configure it, no need for adb.

foo said:
Yeah, you just need to configure it, no need for adb.
Click to expand...
Click to collapse
Att takes it out so there is no mobile data toggle. If I want to turn mobile data on I have to go into a few settings to get to it. I used to be able to run a few adb commands and I would add the toggle back in but it doesn't work with oreo. I like to be able to toggle it on and off. I don't like to have to go into numerous things to turn it on and off. When I run the command now it gives me a error.
Here is the link in case anyone wants to look. IF someone can run the first command in adb that has the mobile data toggle and post here I would appreciate it. Thanks
https://www.google.com/amp/s/www.xd...gs-tile-toggle-on-samsung-galaxy-devices/amp/

Nevermind.

mikep2323 said:
Att takes it out so there is no mobile data toggle. If I want to turn mobile data on I have to go into a few settings to get to it. I used to be able to run a few adb commands and I would add the toggle back in but it doesn't work with oreo. I like to be able to toggle it on and off. I don't like to have to go into numerous things to turn it on and off. When I run the command now it gives me a error.
Here is the link in case anyone wants to look. IF someone can run the first command in adb that has the mobile data toggle and post here I would appreciate it. Thanks
https://www.google.com/amp/s/www.xd...gs-tile-toggle-on-samsung-galaxy-devices/amp/
Click to expand...
Click to collapse
Oh, I wasn't expecting that. Don't know why they would do this, maybe some customers toggled it by accident and complaint that Internet is not working? Hmm...

So if customers don't know what they are doing regular people have to be treated like little people now too lol, no it's because they want control to keep data advice at All times! Otherwise you would be able to have a widget huh!!