Hi,
I'm a brazilian beginner in Android.
I can't update my SGS with KIES, even using the Patcher.
Using the version KIES 1.5.3.10103.102 and Kies Patcher 1.7 , it shows no upgrade to my phone.
I bought it on EUA, it's unlocked.
PDA: JG5
Phone: JG7
CSC: JG4
Frmware version: 2.1 update 1
kernel version: 2.6.29 latin.umtsAsamsung#2
Eclair.ubjg5
Does someone could help me? What could be happening?
I really want to upgrade to FROYO via KIES.
Thanks in advance
Regards
Please post a question in the correct section.Q&A
Does someone could help me? What could be happening?
I really want to upgrade to FROYO via KIES.
Has your network a Froyo update .Network as in the original network provider that the product code is tied to .
jje
Sorry, i thought here was the correct section.
How can i check about you said of network?
Thanks
Ask your network .
jje
JJE,
Even my SGS been UNLOCKED?
Thanks
If you can figure out what the firmware for your region is for Froyo you can update it using Odin even if you particular network provider doesn't have an update available for your particular phone.
Your phone branded = xxx Froyo update via Kies for that brand .
Unlocked is Sim only phones product code remains with original network seller .
Unlocking is only removing restiction to use a network .
If you have Sim for ZZZ on a XXX branded unlocked phone the product code for the phone and firmware is still the original xxxx and will update to that via Kies .
Other methods strictly speaking void your warranty .
Want firmware for the network you are on then Kies Registry patcher and spoof the product code to your new network .
Or via Odin use a generic non branded Samsung firmware to update .
jje
I want to update just with KIES, like a official update. i have some fear about use ODIN.
JJE: I will try differents code on Kies Patcher to see with it recognizes the update. Thank you very much.
JJE:
I tried all codes of BRAZIL but nothing happens.
I have a doubt, my phone is:
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
Should i try the code referring this "TUB" from my phone??
Thanks!!
No other suggestions bar have a look in this Brazil specific post .
http://forum.xda-developers.com/showthread.php?t=919219
jje
No progress...
My phone is I9000T ( the post says that is sold in Mexico ) but i bought in USA.
Is that some detail after select the CODE on Kies patcher?
Thanks
samsung has set the realease date for these firmwares in different countries and at different times!! sooo all u can do is wait or u can book a ticket to florida and upgrade it there.thats where i upgraded my galaxy s
happy days
I have a sim unlocked Omnia 7 running Mango 7740 on eMobile in Ireland
With firmware details as following:
PDA: I8700XXKH2
Phone: I8700XXKG2
CSC: I8700EIRJK1
Weird issue is the CSC has the original firmware. How do I get the phone to update to the latest offical firmware with Internet Sharing
Hi,
Can anyone confirm the appropriate CSC and ROM for Galaxy Note in Saudi Arabia?
Actually I am having problem with updating my note with Kies (my phone is not upgradeable through Kies). I hope this is due to mismatching CSC and ROM and I think changing CSC might help but I am unaware of appropriate CSC and ROM details for Saudi Arabia.
Following is the phone, pda, and CSC info for my note.
PDA: N7000JPLA1
PHONE: N7000XXLA4
CSC: N7000JPLA1
Build Info: Tue Jan 17 00:51:31 KST 2012
Please note that I have an unrooted phone and the firmware was recently changed by the Samsung (I sent my phone for warranty for screen related issues).
Thanks in advance.
For the whole middle east region the current version is stil JPLA1...
it will take some time before you will get any update as typically the middle east region will be among the last to be updated...
so if you need a newer version...if you dont root and still need arabic reading/writing capability..i"am afraid there is nothing much you can do. If you are rooted than you can always flash a newer official firmware and apply RTL patch to correct the issue.
The choice is always yours.
iznee said:
For the whole middle east region the current version is stil JPLA1...
it will take some time before you will get any update as typically the middle east region will be among the last to be updated...
so if you need a newer version...if you dont root and still need arabic reading/writing capability..i"am afraid there is nothing much you can do. If you are rooted than you can always flash a newer official firmware and apply RTL patch to correct the issue.
The choice is always yours.
Click to expand...
Click to collapse
I tried XSG code as CSC and now it is working fine with Kies.
Since I have LA1 rom it is not easy to root it. I will root it once I receive official ICS update.
Hi guys,
I'm not receiving any updates for my Note 8 (Model: SM-950F/DS). The phone says that the latest updates have already been installed.
Android security patch level is still on 1 August 2017
AP: N950FXXU1AQI8
CP: N950FXXU1AQHB
CSC: N950FOXM1AQHF
Service provider SW ver.
SAOMC_SM-N950F_OXM_DBT_0031
DBT/DBT/BRI
So, what's the problem and how do I get updates?
Looks you are OXM csc, should receive the security patch if May.
Probably you can try check the update with smart-switch.
emanresu2 said:
Hi guys,
I'm not receiving any updates for my Note 8 (Model: SM-950F/DS). The phone says that the latest updates have already been installed.
Android security patch level is still on 1 August 2017
AP: N950FXXU1AQI8
CP: N950FXXU1AQHB
CSC: N950FOXM1AQHF
Service provider SW ver.
SAOMC_SM-N950F_OXM_DBT_0031
DBT/DBT/BRI
So, what's the problem and how do I get updates?
Click to expand...
Click to collapse
Firstly please note,
i might be wrong.? with my assumption below?
Anyway when i did not received any OTA, i realized that i had to "align" (same) CSC
I had to flash my correct latest (handset) service provider software to sort it out.
if i look at your CSC it's ...... DBT/DBT/BRI
Apparently CSC.. ... /.... /BRI , is "hardcore". You cannot change that/original CSC ?
Now I'm on CSC.... XFV (Vodafone /Vodacom)
Only when i managed to "align"
my CSC to " XFV/XFV/XFV" i again started to received OTA again.
I'm on May Security patch.
See screenshots.
Now as i stated above. I might be wrong
but this is the only way i managed to get my
OTA sorted out..
Above method worked for me.
Good luck
Greetings,
I just picked up a Note 9 SM-N9600 Its unlocked. Currently out of the box with just slipping in the SIM and setup works with no issuess.
Cricket Wireless in the US (aka ATT network)
I haven't flashed or rooted/roms since my Note 3 days. So i just want to be clear on the proper firmwares.
I currently have the following, and would like to flash it to Pie 9 since there is no OTA update i can detect at this time. I do not care what firmware as long as i can still use the phone I do not care about SAMSUNG PAY. That being said something real strange about this phone is the CSC code. It reads TTT/TTT/PCT. I know PCT is puerto rico. I don't know what the TTT is for. Isn't the order for CSC. Sim1/Sim2/Original country?
below is my devices info. Im trying to put my head around this. I downloaded SamFirm_v0.3.6 used the PCT for Region. I came back with this stuff to download PIE. Honestly i do not care if its flashed to some US based firmware unbranded if this is even an option?
SamFirm_v0.3.6 DOWNLOADED THIS
P_N9600ZHS3CSH3_CL16463908_QB25746639_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
BL_N9600ZHS3CSH3_CL16463908_QB25746639_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N9600ZCS3CSH8_CP13731896_CL16463908_QB25746639_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OWA_N9600OWA3CSH1_CL16619223_QB25290030_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_OWA_N9600OWA3CSH1_CL16619223_QB25290030_REV00_user_low_ship_MULTI_CERT.tar.md5
DEVICE INFO as it currently flashed and working on Cricket
This came from an IMEI Site when i put in the number SM-N9600ZBLPCT
AP:N9600ZHU1ARG6
CP:N9600ZCU1ARG6
CSC:N9600OWO1ARG6
service provider SW Ver. SAOMC_SM-n9600_OWO_TTT_OO_0009
TTT/TTT/PCT
Model: SM-N9600 (crownqltezh)
Manufacturer: samsung
Baseband Version: N9600ZCU1ARG6
RIL Version: Samsung RIL v4.0
Build Number: M1AJQ.N9600ZHU1ARG6
Build Fingerprint: samsung/crownqltezh/crownqltechn:8.1.0/M1AJQ/N9600ZHU1ARG6:user/release-keys
Bootloader: N9600ZHU1ARG6
TTT/TTT/PCT