Sharing collected and semi-patched version of LGUP which working without uppercut and also show Dev setting for T Mobile LG G6 ( H872 ) . Yet to learn the settings in details - you may can help.
Download:
https://mega.nz/#!OJRnRAhT!cfv5nGP1pLLy_IcTHizU4r9xErMP9g6PoKr7WioNNuk
And then execute exe files sequentially. ( numbered )
Screenshot attached
Related
Most of you are stuck on a yellow screen with”Emergency mode!!” or the phone is not responding at all. You guys wanted a custom rom like Optimus Prime-v2 and let me tell you, this time it will work. Optimus One P500 comes with stock android 2.2 – V10a, V10b … and android 2.2.1 – V10n. They might be done for different regions depending upon the phone release and its popularity and definitely bug fixes and enhancements. To have Prime-v2 on your handset you will require V10a or V10b on your handset. Reason, V10n stock cannot be rooted easily. Rooting the handset is must if Prime-v2 is required on the device. Steps to install V10a, V10b series. I am using Windows 7 32-bit, 3 GB RAM laptop:
1. Clean your system first; get rid of LG PC suite and other stuff shown in Uninstall Program with vendor name as LG. Remove MSXML builts from the handset. Remove Nokia and other drivers if they are on system like Ovi suite etc. I also removed a lot of Microsoft runtime environments. Not sure about the reason but it worked for me.
2. LG usb device drivers, download the application B2CAppSetup.exe http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe .
3. In the Menu Bar, click "Options & Help", and click "Country & Language". Select the appropriate Country & Language. I used India and select P500 from the list that popup after you change the country and region. It will download, install and save the drivers somewhere in C:\LGP500\USB_Driver, it will prompt to open the rar files, just click and install the exes seen in them.
4. Reboot the system.
5. Right click on Computer -> Properties -> Device Manager and see for three drivers – LG android usb modem, LGE serial usb port and LG composite USB device. Disable the modem driver and reboot once again.
6. Switch off the phone and press volume up + BACK button + POWER button. Phone should turn yellow with text “Emergency Mode!!” To switch it off you have to remove the battery (I know it hurts, but that’s the only way out here). Switch off and let’s continue with the setup.
7. To do the KDZ of system you will require the KDZ software updater, links keep going off and on internet. Try searching for “KDZ_FW_UPD_EN” or “KDZ_FW_UPD_EN.7z” in Google and download the software. It should be somewhere around 2.3 MB. To use it you will required some good version of WinZip or winrar again Google it and install the 7z archive utility.
8. Install msxml.msi as the manual or readme.txt says to do so.
9. To get the V10x Official ROM, you need to first determine the ROM of your choice. List of all firmware available for LG Optimus One P500 (list of codes) http://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP500 , search for your country (use IE it looks sexy in it), I looked out for IND/INDIA. Download link to the ROM is http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/XXXXX/V10a_00/V10A_00.kdz where XXXX is code from list of codes. In my case it was: AINDBK. Save the file.
10. Prepare the handset by removing the SD card and boot it to emergency mode (some are already stuck on it so reading this post…: D) using the key combination stated above.
11. Connect to the PC and it should say, installing drivers’ blah… blah … your device is ready to use now.
12. Run the KDZ updater downloaded in step 7. Select 3GQCT in Type, DIAG in PhoneMode, and browse for ROM V10a in KDZ file and hit Launch Software update. Wait for somewhere around 5-10 minutes. It should say ===FINISHED=== in the log window of updater.
13. Handset will reboot, if not wait for another 5 minutes. Unplug from USB and try to switch it on.
If you guys wants help with details on setting up the custom ROM, I mean more detailed information like above let me know. I will try to help you out.
What's about some kind of merge...
http://forum.xda-developers.com/showthread.php?p=10006406#post10006406
Yes, I think we should + I am thinking of doing detailed notes on How to Root and do the custom rom with proper steps for newbies.
Tell me what you need from me... my post is also not having stuff in bold/italics and proper links.
"[HowTo] Newbie guide to recover a dead P500"
I think if the phone can start in emergency mode is not completely dead. Here people have the realy dead phone http://forum.xda-developers.com/showthread.php?t=878286
This is very similar thread.
I sugest you to merge your thoughts with The_ERROR that has already this one:
http://forum.xda-developers.com/showthread.php?t=883314
Thread closed!
Link: "http://bit.ly/sgA8o1" (copy paste this in your browser as i apparently can not post links, sorry!)
Folow the guide on that page or:
Code:
Want that fancy WiFi Hotspot internet sharing Tethering feature on you Windows Phone 7 device? If you are a Samsung Omnia 7 owner today is your lucky day. T-Mobile Germany pushed out a new firmware last night version I8700XXKI4 with the tethering / Internet Sharing feature enabled (thanks for the tip guys!). I’m a nice guy so I grabbed the firmware file and uploaded it so you can manually install it on your handset. Follow the instructions below (same a before and I’m not responsible if it doesn’t work for you):
- Download the firmware here (remember that’s not the OS but only the firmware bits) then download the WPupdate tools from here.
- Unzip the Tools in a folder then unzip the firmware in the same folder as the tools.
- Plug in your device, wait until the Zune client starts and then close it.
- Run the the Updater and press S or B (depending on the size of your balls..)
- your phone will then reboot in download mode and update (don’t unplug it or do stupid things with your PC during the whole process..)
Please note that this won’t work if you are running the latest I8700XXKI3 firmware from SFR (there’s a conflict with the 5.9.1.4 bootloader and maybe others too) so you will have to painfully revert back to an older firmware like the T-Mobile RC1 here (I8700XXKH2).
You should then have the following:
OS Version: 7.10.7720.68
Firmware revision number: 2424.11.9.4
Hardware revision number: 3.15.0.4
Radio software version: 2424.11.9.1
Radio hardware version: 0.0.0.800
Bootloader version: 5.9.3.0
Chip SOC version: 0.36.2.0
Enjoy tethering your handset!
Direct Rom download link: http://bit.ly/rOyGCG
Direct Tools download link: http://bit.ly/sOTNzl
P.s: That is not my guide! I had the French SFR bootloader problem, i reverted as he said and it worked seamlesly. You loose all data though!
didn't work for me, unbranded omnia7
here's error from logs dir "UpdateErrors"
ERROR: E_GENERAL_FILE_COLLISION : File Name: CSC_Config.xml :
Following Package on the Device already contains this file:
Package: CSCPackage FROM Version: 0.0.0.0 TO Version: 2250.19.7389.4880 GUID = {C3AD84D2-E6AB-4FEF-9DC8-C76A9A864731}
But following Update Package is causing a File Collision because it also contains this file and it is trying to add it to the Device :
Package: \OSRoot\Application Data\Microsoft\DeviceUpdate\Packages\5FF6E1CF-87C8-4B68-A2B6-B7912F7292AE.1.pks\I8700DTMKI4.cab.pkg FROM Version: 0.0.0.0 TO Version: 2250.19.7720.6464 GUID = {39813B40-A115-11DF-981C-0800200C9A66}
ProcessGraphs :CheckFileOwnsership returned E_GENERAL_FILE_COLLISSION
ERROR: UpdateOrderFromFileList: MAIN OS Update: MAIN OS Update Failed with HRESULT : 0x8018001e
=====================================================================
GOOD PACKAGES AND BAD PACKAGES LIST
=====================================================================
UpdateOrderFromFileList failed with code 0x8018001e
BAD PACKAGE: I8700DTMKI4.cab.pkg ERROR CODE: 0x8018001E Total number of Bad Packages: 1
Process Failed with code 0x8018001e
UpdateValidator finished at 06:30:19 02/28/1980
================================================
START OF ULDR \ UPDATEAPP ERROR MESSAGES
ERROR: 0x8018001e : Updatevalidator in ULDR reported this error. Update cannot continue.
ideas on how to avoid it???
yes, i had the same error, just follow the instructions on that page, install the older mango version
here is the post where you downgrade your mango rom.
http://bit.ly/pK0v0N
Beware!!! If you follow the instructions in that post you will void your warranty, your new rom will be a T-mobile german rom (you will have to manualy change the language in english), t-mobile also will be all over your phone, lot's of crappy apps that you will have to uninstall manualy! Your search provider in internet explorer will be a combination of tmobile and german google, you can change that in the settings menu.
Direct Link for the rom Download http://bit.ly/tvsHop
In the archive you will find a bunch of files.
* WP7 Downloader Ver 7.41 for Publish (Add OASIS Latin).exe
* Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0.exe
* PDA_I8700XXKH2_sec.nb0
* I8700XXKG2_02_RC1.bin
* I8700DTMKH2_ENG.PKS
* EBOOT_I8700XXKH2_CO04_REV02_sec.eb0
* CSC_I8700DTMKH2.csc
First unarchive in a folder.
Then install the samsung mobile driver (if you don't already have it)
Open the app WP7 Downloader Ver 7.41
load everything like in the attached photo
put your phone in download mode (with phone turned off press volUp+cameraButton and then power up while keeping those buttons pressed)
connect the phone and press start. Don't do any funny stuff on your pc. I prefer to do that on a laptop with full battery charge and plugged in!
After this install your phone should look like this :
Software: windows phone 7.5
os version: 7.10.7720.68
firmware revision number: 2424.11.8.2
hardware rev number: 3.15.0.4
radio soft. vers.: 2424.11.7.2
radio hardw. vers.: 0.0.0.800
Bootloader: 5.8.0.8
Chip SOC version 0.36.2.0
Now you can update to the new T-mobile rom that has thethering enabled!
thanks for the info but I think i will just wait for an official unbranded update maybe...
My omnia was a branded T-mobile DE before and i unbrande just because i don't like splash screens of something I'm not using
It's like having a bmw with a ducati engine
I have a tablet with no 3g so i was kinda desperate!
IN THE NAME OF ALLAH
[URL=http://img138.imageshack.us/i/nph4.jpg/]
[/URL]
All Mods And Tricks And Tweaks For LG L3 E400 Will Put HERE
I Never See Topic Like This IN Our Forum Only For LG E405 By Sudeep Duhoon:good:
So Every One have e400 post here about his proplem , about any Explain , ........etc
LG E400 Root
ON THE NAME OF ALLAH
Try More Than More Root This Mobile And get Failure
The Only Method That Done With Me I Will Explain It And
Want From You Post The True Stock Rom And The True Method That Work With U
1. Rooting voids the warranty of the device. However, you can restore the warranty by unrooting the device.
2. The following procedure works on Windows based PCs only.
3. You must have drivers for your device installed on your PC. You can get them from here
Click to expand...
Click to collapse
You Can Download Root Package From Attachment
Click to expand...
Click to collapse
1. Download and place the Root Package archive on your Desktop.
2. Extract files from the archive to your Desktop.
3. Enable the USB debugging option on your device by heading to Menu>>Settings>>Applications>>Development>>USB debugging.
4. Connect the device to your PC via USB cable.
5. Double-click on the run.bat file you extracted from the archive.
6. It should start rooting the device.
7. Once done, disconnect the device from your PC.
8. And you’re rooted now!
Click to expand...
Click to collapse
[URL=http://img580.imageshack.us/i/e0hp.png/]
[/URL]
The Only Stock Rom Works With This Spectrum Method Was : V10c united arab emirat
ClockWorkMod Recovery
on the name of allah
Flashing ClockWorkMod Recovery By Using Terminal Emulator
In This Thread ....
http://forum.xda-developers.com/showthread.php?t=2405279
Click to expand...
Click to collapse
ON THE NAME OF ALLAH
UNBRICK LG E400 WITH KDZ
1- Download LG e400 Drivers From
https://www.dropbox.com/s/dqycivg8x1gdgil/LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2.exe
2- Download Stock Frimwares From
http://lg-phone-firmware.com/index.php?id_mod=11
3- Download KDZ Archive From
http://www.mediafire.com/download/9wdbz67ax9x3687/KDZ_FW_UPD_EN.7z
4- Disable Your Anti-Virus
5- Extract KDZ Archive on ur desktop
6- install LG USB Drivers + msxml.msi ( From kdz archive)
7- Restart Your PC
8- Your E400 should 60% at less charged
9-Power off E400 Then Remove Battery Then Insert it Then Go To Emergeny Mod ( vol uo+Vol down+Power)
10- connect your E400 and still to get usb drivers message suceess
11- IF there is proplem With Drivers on Win 7 Try to Disable Android Net Drivers From Device Manager
12-Do like thos 2 Pictures
13- Finally Your E400 Will Reset But Take More Time ..Never Worry
[URL=http://img802.imageshack.us/i/k4m3.png/]
[/URL]
[URL=http://img153.imageshack.us/i/ovc3.png/]
[/URL]
For Setting ... just i use Emergency Not Diag ... Diag suitable For e405 but Never Work With Me But Emergency Work Fine Every Time i Flash My e400
Click to expand...
Click to collapse
It exists root spectrum script in Linux too, in google appears(I'm rooted in linux because windows had bsod when rooting and bootloped mobile, it solves hard reseting..)
If it was an post like that in the past when I do all, it would have been very nice!, good job recopilating this
Enviado desde mi LG-E400
kprkpr said:
It exists root spectrum script in Linux too, in google appears(I'm rooted in linux because windows had bsod when rooting and bootloped mobile, it solves hard reseting..)
If it was an post like that in the past when I do all, it would have been very nice!, good job recopilating this
Enviado desde mi LG-E400
Click to expand...
Click to collapse
unforthnatly i dont have linux now on my pc man
Linux run.sh for rooting
Napst3r88 said:
unforthnatly i dont have linux now on my pc man
Click to expand...
Click to collapse
yes, i read it, but if you can, because the process is equal (using run.sh), you can post the link of the root spectrum for linux, is this: http://vulnfactory.org/public/spectrum_root_linux_osx.zip
And here the source of the link: http://gadgetstip.com/root-lg-spectrum-smartphone-method-by-dan-rosenberg/
Hi,
Any solution for my problem is welcome.
Phone state : only access to fastboot / recovery.
Apparently no way to AP secure fastboot flash / no possibility to manage to driver to get fastboot driver over windows i get a special error even with unsigned driver etc / fastboot work on mac os.
Been spend already 10 hours on it, tried all the available scripts.
SIDELOAD possible i just need the right file up to 29.40, (as blur file please)
Many thanks if u got it.
Hi all,
I would like to write a short instruction about getting VoLTE and VoWIFI to work on a Xiaomi device. I'm using a Xiaomi 10T 5G with Evolution X, but it has mainly to do with the modem in your device, so it might work for other devices and ROMs as well. If you use a different ROM, the way DIAG mode is enabled might be different for you.
Code:
/*
* I am not responsible for bricked devices or any damage you made
* to your device. You have been warned
* Your are making changes to your modem's firmware. Make sure you
* have a backup!
*/
You have to enable VoLTE and VoWIFI in your device settings.
To check if it works:
- dial *#*#4636#*#*
- chose phone information
- chose in the menu IMS-servicestatus
You will have VoLTE and VoWIFI if it says registered and availabe.
If not, you can continue with the instructions below:
You will need a few things for this, like:
- Qualcomm USB Drivers
- QPST
- Root or another way to enable diag mode
- ADB
- Xiaomi firmware zip file
You can find many tutorials on XDA about these things, so I'm not going into detail about how to set this all up.
If you have the above installed and working:
Open a command prompt
Code:
adb shell
Code:
setprop sys.usb.config diag,serial_cdev,rmnet,adb
After you install QPST search in winodws for PDC (a yelllow and white icon) and open it.
Select 'Qualcomm HS-USB WWAN adapter'. (if this doesn't work, check if you've installed the Qualcomm USB Drivers correctly)
You'll now see a list of all modem configuration files. Check if your carrier is in the list. If so, right click on it, select SUB0 and SUB1, and click 'activate'. Check if VoLTE and VoWIFI works, if yes, reboot and check again.
If you do not see your carrier in the list, download the firmware for your device.
Extract the zip file
Navigate to \firmware-update\NON-HLOS.bin and extract this file
Navigate to \firmware-update\NON-HLOS\image\modem_pr\mcfg\configs\mcfg_sw\generic\ and search for the .mbn file for your carrier. Mine was in fw_apollo_miui_APOLLOGlobal_V14.0.1.0.SJDMIXM_2e94304468_12.0\firmware-update\NON-HLOS\image\modem_pr\mcfg\configs\mcfg_sw\generic\AF\Vodafone\Commercial\EG
Go back to PDC and chose 'load'
Select the .mbn file you've found above
PDC will reload the list and you'll now see the profile for your carrier.
Right click on it, select SUB0 and SUB1, and click 'activate'. Check if VoLTE and VoWIFI works, if yes, reboot and check again.
Now go back to adb and write
Code:
setprop sys.usb.config mtp,adb
to go back to default usb settings.
This should do the trick. You'll now have VoLTE and VoWIFI working.
It took me days to come down to this, with a lot of Google-Fu and very helpfull XDA topics. So I hope it might help you as well.
This has been tested for Vodafone Egypt, mbn for Vodafone EG has been attached (extracted from latest global firmware V14.0.1.0.SJDMIXM), just load and activate.
reference: https://forum.xda-developers.com/t/guide-volte-vowifi-xiaomi-phone.4573331/