Hiya,
I just got my cable from expansys, the vga and s-video out is working fine, but i haven't got any thing usb to work yet. I've tried flash Drives and a card reader, just no response, no light or any thing... is there a trick to it or is it not very compatable or is there a chance mine is faulty?
cheers
My guess is that although it is a Host, it does not supply any power, I say this because the battery is only 3.7 V DC and USB devices are 5 V DC, this means that there is not enough Volts in the advantage to power a USB device to start with, never mind powering a USB device and an Advantage at the same time.
You will probably need to plug it into a USB hub that supplies it's own power, like this one
http://cgi.ebay.co.uk/USB-2-0-4-Por...106823769QQcategoryZ96866QQrdZ1QQcmdZViewItem
I had the same problem but it was because the TV out was still on. Once I turned this off in the settings menu it worked fine.
I too had no trouble hooking up a flash drive. No other peripherals were attached to the cable. Alas, no go on a hard-drive MP3 player, but trying a powered hub is a good idea.
Have you tried connecting your USB device, and then soft resetting?
Works for me.
I have no detection of USB devices by my Advantage.
I tried with and withour Soft Reset before and after the cable connection, before and after the cable and flash drive connection, with or without the VGA or Video Output disabled or enabled, but my Advantage does not recognize any USB device (I tried with 2 flash drive, a keyborad and an optical mouse. Nothing to do. These devices do not work with my Advantage).
It seems that the relative drivers are missing.
Someone has a sure fix or solution to this problem ??
Thanks
Battery Powered USB Hub...
This device should work well with the x7500/Advantage. It doesn't require you to carry around a bulky power plug. It runs off of 4 AAA batteries and provides power for up to 4 USB devices. Since the x7500/Advantage has limited power and can't power external drives itself, this is a nice addition and cheap. Hope someone finds it useful.
http://www.radioshack.com/sm-cyberpower-4-port-battery-powered-hub--pi-2259675.html
I have the Dopod U1000. I have connected a thumb drive and a USB mouse without issue. The mouse is useless as far as I can tell as there is no pointer though the buttons work.
I have no problems with a T-Mobile Ameo and a 1Gb Corsair USB Flashdrive - don't even need a soft reset. It's listed as 'Hard Disk' on the Ameo.
Question though: can I just unplug it when done? I'm used to 'safely removing hardware' on the PC, and it just feels wrong unplugging it from the Ameo, but I can't see any similar 'safely remove' method.
Hi.
It depends of the usb device. My 1GB pen drive is recognized but my 4GB isnt recognized (my 160 GB isnt). So I suppose If the usb device isnt powered then only "very low powered" devices are recognized...
If I connect my 160 GB and I plug it to AC then It is recognized correctly...
Does mini usb-usb host cable exist? Where to buy it?
THX!
Look this one http://www.pixmania-pro.it/it/it/255677/art/cowon-iaudio/cavo-usb-host.html#
seems to be what I'm looking for...don't you?
spmc said:
I have the Dopod U1000. I have connected a thumb drive and a USB mouse without issue. The mouse is useless as far as I can tell as there is no pointer though the buttons work.
Click to expand...
Click to collapse
Search the forum for the Modaco Mouse driver. It has a mouse pointer and works flawlessly with a USB Mouse!
4 in 1 Cable
I found te following description of this cable:
http://www.expansys.com/htc/p_htc_item.aspx?i=145166
The HTC SC V100 4-in-1 cable can split the HTC proprietary 16-pin interface on the Advantage into these 4 functions:
- USB 1.1 host (supports USB low power): Plug USB accessories into the USB standard A female port. The host can support these accessories:
1. Thumbdrive
2. Card reader
3. USB keyboard
4. USB mouse
- VGA output: Connect the Advantage to output the screen contents to a projector or PC monitor
- TV output – S-video: Connect the Advantage to output the screen contents to a TV through the S-video interface
- TV output – Composite Video: Connect the Advantage to output the screen contents to a TV through the composite video interface (AV cable)
Technical Details:
Resolution: 640 x 480 pixels, 262K colours
Cable length: 100mm ± 10mm
Connectors support:
- HTC specific 16-pin male for connecting to the Advantage
- USB standard A (Female)
- VGA D-sub (Female)
- S-video (4-pin) out (Female)
- Composite video out (Female)
4
Hi,
I have the HTC 4 in 1 cable for the T-Mobile Ameo (HTC Advantage 7500) and the ability to access a USB thumbdrive or stick appears to depend on the device.
The following devices worked without a hitch:
- Kingston DataTraveler 1GB
- Q motion 1 GB
- SanDisk MobileMate SD+ (This a SD card reader in a USB stick format, very handy to copy data from a SD/miniSD/microSD card to your 7500 without going through Activesync)
Another noname USB stick that I had did not work.
So the trick is to find a low powered USB stick.
Cheers,
Tim
Please can someone give me some exaples about how could I use
Video/S-Video/ option in 4 in 1 cable, considering that I can image how to properly use VGA out and USB host?
THX so much!
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
asci said:
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
Click to expand...
Click to collapse
Yes, that should work for you. I'm sure it's not more than $5.00 USD. ;-)
asci said:
Hi,
before I buy it, could it work?
USB 2.0 (compatible 1.x)
Adapter USB from Type A (female) to mini USB 5pin (male)
THX so much!
Click to expand...
Click to collapse
Are you hoping to connect USB accessories to your Athena with this?
If so, it will not work.
Only the 4 in 1 Host cable connected to the ext USB socket will do that.
This adaptor will only connect to the Sync & Charge socket, and will not provide USB Host capabilities.
Pantaloonie said:
Are you hoping to connect USB accessories to your Athena with this?
If so, it will not work.
Only the 4 in 1 Host cable connected to the ext USB socket will do that.
This adaptor will only connect to the Sync & Charge socket, and will not provide USB Host capabilities.
Click to expand...
Click to collapse
So it will not provide me host function...?
Than the HTC cable should have something like a "chip" in it to provide host, is it right?
Yes, the USB Host chip must be either in the addon cable, or linked to the extUSB socket in the Athena. But definitely not the sync & charge socket.
It is possible to use this cable to show NexusOne screen on TV?
Samsung Cable
It's similar to HTC's micro usb to hdmi cable for the incredible.
It won't work by just plugging it in but I don't see why it couldn't be made to work once we get the Galaxy S source/kernel/rom
behelit said:
.. but I don't see why it couldn't be made to work once we get the Galaxy S source/kernel/rom
Click to expand...
Click to collapse
It won't work, because there is no HW to support it. If there was - Desire and Evo would be sold with video out option.
http://forum.xda-developers.com/showthread.php?t=738754
[edit] For a full-scale USB2HDMI dongle support - there needs to be USB OTG support in the kernel, and it's not there yet. For HDMI out over USB you need HW in the phone, which isn't there. And the third option is a device which is USB master and needs a driver in the phone - I don't think this or Incredible's cable is such device.
Are there MHL to VGA adapters available that are know to work with the 4x?
Or is MHL standardized enough that i can pick any MHL to VGA without any worrying about working?
I know HDMI is usually better but my HMD (tac eye) takes only VGA or SVideo (though SVideo quality really suxx, its only on for NV not for data).
Also I see some MHL to VGA adapters have a secondary USB port, can this be used only as client or could I somehow connect a pointing device to my phone?
If I were you i would take MHL to HDMI cable and then HDMI to VGA. Reason is simple. Sometime you may want to connect your phone to new TV so you will need HDMI as it is standard port.
Secondary USB port is microUSB and it is used to charge phone while conected to TV (at least thats how it works with MHL to HDMI cable).
Stevic Milos said:
If I were you i would take MHL to HDMI cable and then HDMI to VGA. Reason is simple. Sometime you may want to connect your phone to new TV so you will need HDMI as it is standard port.
Secondary USB port is microUSB and it is used to charge phone while conected to TV (at least thats how it works with MHL to HDMI cable).
Click to expand...
Click to collapse
Well, for me this would than look like: MHL-HDMI adapter connected to a HDMI-VGA adapter connected to VGA-"Proprietary HMD Port" thats in used space and weight more for the adapters than for the phone and HMD. As i intent to wear this on my body thats rather not cool. Also the HDMI-VGA adapter will want some juice what will be an additional drain on my batteries.
The "VGA-"Proprietary HMD Port" is passive, so if I like the setup I will probably cut the MHL-VGA adapter open and attache the signal lanes directly to a fitting plug for my HMD.
Also I don't own a TV just a 30" WQXGA Dell Monitor with a Duallink DVI port its one of the old models that had only Duallink DVI, no scaling no DVI no VGA and no other ports.
An other issue would be how to control the phone when it in my pocket, how can I attache some pointing device and would this even work with android OS?
Or would I have to wait for an unlocked bootloader and this cool ubuntu on phone projects that provide a full ubuntu desktop?
PS: is the micro usb port on the adapter only used for charging or is there still a USB signal on it?
David
If i got you right, you want to control phone, connected to PC monitor, over HDM goggles?
You can try something like this https://code.google.com/p/androidscreencast/
It is a software that enables remote control of your phone over WiFi, so if your goggles work on PC it should work here to. It does the same job as the cable connection (MHL to VGA)
As for the MHL to VGA adapter you have 4 connectors:
1) male microUSB (one you connect to your phone)
2) female microUSB (charger or power supply, so it doesn't use phone battery)
3) female VGA (for monitor)
4) 3,5 audio jack for sound
Stevic Milos said:
If i got you right, you want to control phone, connected to PC monitor, over HDM goggles?
Click to expand...
Click to collapse
Not exactly I don't want to use a PC at all. I want to connect the HMD (Vuzix-Tac-Eye-LT-Monocular) directly to the phone and use some pointing device or mini keyboard to control the phone.
I have the adapter and a problem,
the phone is only giving out its native screen resolution, my HMD cant handle.
How can I change the resolution so SVGA ?
Subj.
Is able to use Mi5 with External Display via USB Type-C to DisplayPort adapter ?
Dcow said:
Subj.
Is able to use Mi5 with External Display via USB Type-C to DisplayPort adapter ?
Click to expand...
Click to collapse
I also want to know, but if XIAOMI is not claim to support, it means that no DisplayPort IC beyond the Type C port to convert the HDMI signal to DP
I tried USB-C to USB adapter, works fine with keyboard and stuff. Might worth to test it out cause I think it works on DP as well.
I want to connect a 27 inch monitor or projector.
From the official support says (ticket #770598, from Sky) that phone 3T supports out video via HDMI
I understand that you wanted to know if OnePlus 3T supporte USB to HDMI. I can provide you with the information that you needed.
I would like to inform you that OnePlus 3T supports HDMI as long as it is connected to the OTG cable/ converter.
Click to expand...
Click to collapse
Phone have usb type c version 2.
My questions:
1. This phone is really support hdmi alt mode? I don't see the image HDMI (or DisplayPort or Thunderbolt) alternat mode on the box.
2. If (1) is true. Any cable good for me? Ex. usb type c multiport adapter from apple store or necessarily with OTG?
3. How big is the latency video of through miracast (ex. ezcast)? If connect mouse and watch on cursor movement.
I tried this yesterday with a USB C to Hdmi adapter I got off Amazon and I had no luck connecting to the monitor.
LyricalMagical said:
I tried this yesterday with a USB C to Hdmi adapter I got off Amazon and I had no luck connecting to the monitor.
Click to expand...
Click to collapse
Thans for the reply
I think they sold me a dud
Phone not supports MHL and other alt. mode
II wonder if a driver could be put into a ROM to support it via USB OTG since it doesn't support MHL?
I have an old external sound card, a Creative Xmod, that works perfectly with my roommates USB C, OTG adaptor.
stevenswall said:
it doesn't support MHL?
Click to expand...
Click to collapse
I think because it is not implemented in hardware in the phone
If I'm correct Display Port alternate output requires USB Type-C 3.1 since the phone supports only 2.0 it shouldn't work. However not many phones utilise this feature even Google Pixel doesn't use this mode
Video out works fine on the 3T but only with Displaylink adapters. (So far anyway)
I have one and can confirm it definitely works either via HDMI or HDMI to DVI (I've tried both)
I used this one: https://www.amazon.com/gp/product/B01N40RQV4/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
but any displaylink adapter or dock will work. (Make sure it very specifically says dispaylink, check the displaylink website if you aren't sure)
The only note is that displaylink says the Ethernet ports on the docks do not work with android.
(I suspect they might work on devices that support a regular Ethernet adapter though, I haven't been able to get a normal Ethernet adapter working on my oneplus 3t though for what that's worth.)
you will also need the displaylink app from the playstore though it does not have to be running.
if any of you have experience using an external Audio DAC with USB Audioplayer pro the process is very similar.
Once you plug the monitor in, a pop up will ask if you want to let the displaylink app control the adapter and if you hit "ok" it does the rest automatically.
Does the phone charge while connected to the DisplayLink adapter?
Just try with Chromecast or anything else with Mirascreen option
Does it work with Anker Premium USB-C Mini-Dock
Hi there everybody:
Have anyone tried to connect a dock like the Anker Premium USB-C Mini-Dock, Does OP3T work for charge and to view the USB ports of the dock? May be HDMI and Ethernet doesn't work but for me the matter is the chargue and the USB ports to connect an external DAC, a microsd and a pendrive. Regards.