1-download the ROM J330F OREO ROM
2-flash the rom with ODIN
3-do full wipe if you have not stock firmware
4-enjoy :good:
Does this work on j330g?
LeeTG3 said:
Does this work on j330g?
Click to expand...
Click to collapse
Don't do that. I'm pretty sure the J330G already have Android 8.0 Oreo. Go check your Device Software update (OTA) or flash manually on odin by this frimware: https://www.sammobile.com/firmwares/galaxy-j3-pro/SM-J330G/
RalphyDucklin said:
Don't do that. I'm pretty sure the J330G already have Android 8.0 Oreo. Go check your Device Software update (OTA) or flash manually on odin by this frimware: https://www.sammobile.com/firmwares/galaxy-j3-pro/SM-J330G/
Click to expand...
Click to collapse
It does but not for my carrier, i'll either have to wait or manually flash it.
LeeTG3 said:
It does but not for my carrier, i'll either have to wait or manually flash it.
Click to expand...
Click to collapse
I guess you have wait for your carrier. Because if you flash manually with the other firmware region, it probably make your baseband goes unknown and breaks your network service.
halim_khaled said:
1-download the ROM J330F OREO ROM
2-flash the rom with ODIN
3-do full wipe if you have not stock firmware
4-enjoy :good:
Click to expand...
Click to collapse
Thanky mate, thanks to u now my j3 2017 have officially android 8.0.0 (OREO)
LeeTG3 said:
It does but not for my carrier, i'll either have to wait or manually flash it.
Click to expand...
Click to collapse
Which carrier? Is it locked to that carrier?
ashyx said:
Which carrier? Is it locked to that carrier?
Click to expand...
Click to collapse
Its spark and its unlocked, but I have the update now
Sai
Does this work on j330fn
The rom don't work on my phone. I get a fail error
Related
Hi guys,
This is the bootstack from the latest nougat update for the Chinese version. I picked it up from 4 pda.
This upgrades the modem to the latest baseband version. I have been using it for about 2 days and the change in 4g signal is significant.
The signal is more stable and calls actually go through now.
This will work on all lineage os based roms
ZTE_A2017_V1.1.0B16_BootStack_Fix_by_djkuz.zip(includes patches for EDL, FASTBOOT and ROOT)
https://mega.nz/#!Vv4mHI6I!d3UKOkII36cQMF3rNDecdFBIfv2BVElGSTr1PFrC4LU
CRC32: 786D0EFD
MD5: 3A050B3320710F5E3F22F7C88EC7A984
SHA-1: 9176B007CF62E59FD6001B80942D8ECE294355F8
I would recommend doing a clean flash or at least removing security from your Android device before flashing or you will be locked out.
I have attched a screeshot with the latest baseband version
Can anybody please confirm that this update works? Thanks!
Choobilsky said:
Can anybody please confirm that this update works? Thanks!
Click to expand...
Click to collapse
It works! I reflash it after every lineage os update
This bricked my phone, an A2017U Model.
Will attempt to recover it
Edit: Recovered, EDL was found working.
gebn said:
This bricked my phone, an A2017U Model.
Will attempt to recover it
Edit: Recovered, EDL was found working.
Click to expand...
Click to collapse
This was specifically for the Chinese version only
Vurio said:
This was specifically for the Chinese version only
Click to expand...
Click to collapse
I know now, misread the topic, thought it was a bootstack extracted from the chinese variant for all variants.
well at least my post serves as a warning for all.
You think it can works with a2017 with a2017u stock b29 by draken rom?
Can I flash this over my current lineage 14.1?
wlodarr said:
You think it can works with a2017 with a2017u stock b29 by draken rom?
Click to expand...
Click to collapse
As long as you have the Chinese version a2017, this will work.
Axebladewarrior said:
Can I flash this over my current lineage 14.1?
Click to expand...
Click to collapse
Only flash if you have the Chinese version a2017, otherwise you will lose cell signal.
Vurio said:
Only flash if you have the Chinese version a2017, otherwise you will lose cell signal.
Click to expand...
Click to collapse
Thanks for the help. I flashed it over dark rom and it works nicely.
I prob know the answer to this but I am running the latest BRA2 firmware on my exynos N950FD and I downloaded the latest Three UK firmware, but cannot flash it. I REALLY want to get wifi calling and VOLTE.
Am I right to assume that the latest Three firmware is older than my current BTU and therefore ODIN wont let me flash? And if so, any way around this?
what's your current build?
bober10113 said:
what's your current build?
Click to expand...
Click to collapse
nmf26x.n950fxxu3bra2
mikey_sk said:
nmf26x.n950fxxu3bra2
Click to expand...
Click to collapse
Well you're stuck on bootloader v3 (u<3>bra) and it won't allow to downgrade to bootloader v2 (u<2>×××).
You'll have to wait for three to release their new firmware to blv3.
BluePhnx said:
Well you're stuck on bootloader v3 (u<3>bra) and it won't allow to downgrade to bootloader v2 (u<2>×××).
You'll have to wait for three to release their new firmware to blv3.
Click to expand...
Click to collapse
ugh how annoying. three are sooo slow in releasing updates ... thanks
BluePhnx said:
Well you're stuck on bootloader v3 (u<3>bra) and it won't allow to downgrade to bootloader v2 (u<2>×××).
You'll have to wait for three to release their new firmware to blv3.
Click to expand...
Click to collapse
also i was reading somewhere that when you go from BTU to a carrier firmware build you need to click on re-partition in odin.
is there truth in this?
How do I unlock the bootloader of my Huawei mate 9 ?
Did you get the key before July 24? If not.... you can't. Not without paying some third party that might or might not work. (eg. Funky Huawei )
This worked for me. But you have to pay 4€.
Also: https://www.xda-developers.com/huawei-honor-unlock-bootloader-fee/
mallna said:
This worked for me. But you have to pay 4€.
Click to expand...
Click to collapse
I will try this out later！
Its still work?
not possible . im willing to spend any amount of $$ to unlock the bootloader but sadly no possible method for the latest firmware.
lawong said:
not possible . im willing to spend any amount of $$ to unlock the bootloader but sadly no possible method for the latest firmware.
Click to expand...
Click to collapse
It does work but first you need to downgrade your phone to nougat (Android 7.x) first and then it will work.
rex91 said:
It does work but first you need to downgrade your phone to nougat (Android 7.x) first and then it will work.
Click to expand...
Click to collapse
i have read it in others thread that its only possible if not in the latest firmware .
so if phone is on latest firmware i can downgrade it and bootloader unlock works?
leo5111 said:
so if phone is on latest firmware i can downgrade it and bootloader unlock works?
Click to expand...
Click to collapse
No, but there's a chance that the tools you buy access to might be able to extract that unlock code...no guarantee...no refunds...
EDIT seller says its 4.4.23+ EMUI/Android Version: 8.0 is that the unlockable one or is there more to the version that says it?
leo5111 said:
EDIT seller says its 4.4.23+ EMUI/Android Version: 8.0 is that the unlockable one or is there more to the version that says it?
Click to expand...
Click to collapse
You need the build number and security patch date.
Pretty much all EMUI 8 builds on the Mate 9 run a 4.4.23+ kernel, even up through the latest security patches.
Once you know the build number, find it in Firmware Finder, and find the build for that region that enables GPU Turbo. If it's an older build, then it's likely that you could use the official rollback firmware to get the bootloader unlocked.
here ya go that is pic he provided
leo5111 said:
here ya go that is pic he provided
Click to expand...
Click to collapse
Once you know the build number, find it in Firmware Finder, and find the build for that region that enables GPU Turbo. If it's an older build, then it's likely that you could use the official rollback firmware to get the bootloader unlocked.
Yup, .375 is the latest one that's good, after that .377 had GPU Turbo and issues with downgrading.
so im good to downgrade? i will message you when i get the phone in a few days thanks
leo5111 said:
so im good to downgrade? i will message you when i get the phone in a few days thanks
Click to expand...
Click to collapse
You won't get into the trouble that others did with .377 or later, yes.
But there's no guarantee everything works nicely.
Do read as much as possible before doing anything.
Also keep in mind that Android 9 is coming soon so maybe you don't need to unlock and whatnot.
for open kirin roms do you need to decrypt the data?
leo5111 said:
for open kirin roms do you need to decrypt the data?
Click to expand...
Click to collapse
No.....I did not for OmniROM.
Licaon_Kter said:
No.....I did not for OmniROM.
Click to expand...
Click to collapse
how is omni on this phone?
i just upgraded my note 9 SM-N960F from dutch 8.1.0 to German 9.0 pie via Odin . and to be honest im so disappointing with this UI and the whole update i was wondering if is it still possible to downgrade back to Oreo again ???
thanks alot
I think that it should be possible with Odin but honestly I never done it before so don't know. By the way, is the black mode feature implemented it this version of Pie in the toggles or in settings ?
Because I read someware that the initial version of this black mode or night mode or however it's called is not fully implemented like the final version should be.
toggles and settings both of them in night mode , but its not stable i have the feeling its slower my phone down some unknows issus
First try clear cache in recovery mode maybe can resolve. also try to update apps with play store or with galaxy apps because some apps must need an update to the pie version.. After that if all is worthless, maybe a factory reset will resolve Sometimes corrupted data may do this after an update specially after a big OS change like this.
Amr Mohsen said:
i just upgraded my note 9 SM-N960F from dutch 8.1.0 to German 9.0 pie via Odin . and to be honest im so disappointing with this UI and the whole update i was wondering if is it still possible to downgrade back to Oreo again ???
thanks alot
Click to expand...
Click to collapse
Hey let me know if you succeed, as I’m thinking of downgrading as well. ONE UI PIE-9 isn’t all it’s made out to be Oreo 8.1 rocks!
N1NJATH3ORY said:
Hey let me know if you succeed, as I’m thinking of downgrading as well. ONE UI PIE-9 isn’t all it’s made out to be Oreo 8.1 rocks!
Click to expand...
Click to collapse
Downgrading is no problem atm, i downgraded from CSA2 to ARL3 . I flashed the non-home csc though for a factory reset.
gee2012 said:
Downgrading is no problem atm, i downgraded from CSA2 to ARL3 . I flashed the non-home csc though for a factory reset.
Click to expand...
Click to collapse
Thanks do you have a fast mirror ? Sammobile sucks only good if your a paid member and updato is dead links ain't working.. i need N960FXXS2ARL3 / December patch 2018 BTU ? Thanks
N1NJATH3ORY said:
Thanks do you have a fast mirror ? Sammobile sucks only good if your a paid member and updato is dead links ain't working.. i need N960FXXS2ARL3 / December patch 2018 BTU ? Thanks
Click to expand...
Click to collapse
Get SamFirm.exe https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647.
Link https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462.
gee2012 said:
Get SamFirm.exe https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647.
Link https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462.
Click to expand...
Click to collapse
You Rock! Thanks
I am a complete newbie... with that said, I HATE the new android Pie. Can someone help me downgrade back to Oreo? I'm reading the thread and I have no idea what you people are talking about.
cgz1992 said:
I am a complete newbie... with that said, I HATE the new android Pie. Can someone help me downgrade back to Oreo? I'm reading the thread and I have no idea what you people are talking about.
Click to expand...
Click to collapse
You need to download SAMFIRM.EXE ---> Get SamFirm.exe https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647. Do you know your old firmware ? Luckily i had a screen shot of my old firmware i'm back on Oreo 8.1 way better Or what's your Note-9 Model number ? Or Where did you purchase your Note-9 from Country Supplier Sim Free Etc ?
N1NJATH3ORY said:
You need to download SAMFIRM.EXE ---> Get SamFirm.exe https://forum.xda-developers.com/gal...mware-t2988647. Do you know your old firmware ? Luckily i had a screen shot of my old firmware i'm back on Oreo 8.1 way better Or what's your Note-9 Model number ? Or Where did you purchase your Note-9 from Country Supplier Sim Free Etc ?
Click to expand...
Click to collapse
Im sorry but the page of the link you provided could not be found. Model # is SM-N960F/DS. Im pretty sure I was on Oreo 8.1, I just recently bought this Note 9 in Thailand from the official Samsung Store.
cgz1992 said:
Im sorry but the page of the link you provided could not be found. Model # is SM-N960F/DS. Im pretty sure I was on Oreo 8.1, I just recently bought this Note 9 in Thailand from the official Samsung Store.
Click to expand...
Click to collapse
If you want to go back to Thailand firmware,it's one of the two versions here (MYM) or (THL) :
https://updato.com/firmware-archive...xact=1&r=MYM,THL&v=Oreo(Android+8.1.0)&rpp=15
MYM: https://updato.com/firmware-archive-select-model?record=F0560E6C04E111E99F15FA163EE8F90B
THL: https://updato.com/firmware-archive-select-model?record=77A08C7904B011E99F15FA163EE8F90B
cgz1992 said:
Im sorry but the page of the link you provided could not be found. Model # is SM-N960F/DS. Im pretty sure I was on Oreo 8.1, I just recently bought this Note 9 in Thailand from the official Samsung Store.
Click to expand...
Click to collapse
Please try now it's fixed sorry about that!!
These are all the firmware’s i found for your country as there are 2 provider for you country Thailand.. (SEE PIC) i got a feeling you will be on (THL) i could be wrong man I’m not 100% sure.. i hope someone answers you as i am kind of guessing, I don’t want to mess up your NOTE-9 for you!
i heard somewhere flashing wrong firmware, can make you lose OEM LOCK!! Why not try this launch SAMFIRM.EXE and input firmware from pic or try this first launch SAMFIRM.EXE and select auto to see if it picks up the firmware you need to download Oero 8.1!!
I have never used ODIN before and wanted to know if I need to be rooted to be able to downgrade from Pie to last Oreo firmware?
Also if doing so will cause a factory reset and will I loose the data.
Thanks.
dexter10478 said:
I have never used ODIN before and wanted to know if I need to be rooted to be able to downgrade from Pie to last Oreo firmware?
Also if doing so will cause a factory reset and will I loose the data.
Thanks.
Click to expand...
Click to collapse
No root is needed to dowgrade!! You will lose all your data! So make a back up before you proceed!
N1NJATH3ORY said:
No root is needed to dowgrade!! You will lose all your data! So make a back up before you proceed!
Click to expand...
Click to collapse
Will that affect Knox and Secure Folder feature in anyway?
If not, then this seems to be the Samsung approved official method of flashing firmware. Is that so?
Thanks
dexter10478 said:
Will that affect Knox and Secure Folder feature in anyway?
If not, then this seems to be the Samsung approved official method of flashing firmware. Is that so?
Thanks
Click to expand...
Click to collapse
No Knox will stay 0x0 as your flashing official firmware.. Root and Roms trip Knox and secure folder S,Health etc. So you can flash away regular firmware without any issues!
N1NJATH3ORY said:
No Knox will stay 0x0 as your flashing official firmware.. Root and Roms trip Knox and secure folder S,Health etc. So you can flash away regular firmware without any issues!
Click to expand...
Click to collapse
I'm hoping someone can further clarify the steps needed to downgrade to Oreo. I have the 96OU unlocked US version and I upgraded using the modded Odin method for US Snapdragon versions in the Guides section. I do not like the carrier bloat that was added to my phone and would like to revert back to 8.1. I went to SamMobile and looked up my firmware which I believe is N96OU1UEU1ARL1, my actual model is SMN96OU1ZKFX. I have downloaded Odin3 v3.13.1. I originally used Odin3 v3.13.1 3B patchedD to upgrade. Do I run Odin (non-patched) then input the BL, AP, CP and CSC files from the extracted 1ARL1 file and select Auto reboot and F.Reset Time only, not re-partition? Can I use the patched version of Odin if I want?
I have been looking for a step by step tutorial for this but just can't find one.
If I were to flash the latest U1 Oreo firmware onto my Verizon Note 9 would I lose features such as Wifi calling or HD Voice?
dave678 said:
If I were to flash the latest U1 Oreo firmware onto my Verizon Note 9 would I lose features such as Wifi calling or HD Voice?
Click to expand...
Click to collapse
Before even answering that, what version are you on now? What does it say under settings>about phone>software version>baseband version
frick_trump said:
before even answering that, what version are you on now? What does it say under settings>about phone>software version>baseband version
Click to expand...
Click to collapse
n960usqu1arl1
dave678 said:
n960usqu1arl1
Click to expand...
Click to collapse
yes, the features should work, and yes you will be able to flash oreo.