I need some serious help please.
Situation: My car has bluetooth for phone but not music. So i bought an A2DP FM transmitter. I am trying to use both in the car. one for phone, other for music. problem is, when both bluetooth devices are connected, the music SKIPS horribly.
I've tried a bunch of different roms and radios and tried the a2dpfix and everything I could find.
Basically, when i disable the car bluetooth, the skipping stops.... so it's the radioload or the workload on the tilt that makes the music skip.
So......
1) what can i do to increase bluetooth performance or general system performance?
2) what is the best rom or radio for bluetooth performance?
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
4) what is the music player using the least amount of resources?
THANK YOU. Please help with knowledge, not speculation.
also, any thoughts on prioritizing bluetooth devices or signals to give higher priority to a2dp?
overclocking?
j_bowl said:
radioload
Click to expand...
Click to collapse
Most likely. Several people have reported that issue. A2DP needs lots of bandwidth and realtime availability, if a second connection needs to be maintained at the same time it's very likely to cause interruptions.
j_bowl said:
I need some serious help please.
...snip...So......
1) what can i do to increase bluetooth performance or general system performance?
2) what is the best rom or radio for bluetooth performance?
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
4) what is the music player using the least amount of resources?
THANK YOU. Please help with knowledge, not speculation.
Click to expand...
Click to collapse
What I did to fix this problem was to purchase the new Motorola FM transmitter - it does BOTH on one device - it transmits music to the radioo and gives you hands free for phone - really works well - much better than the Parrott that was in the car to begin with.
Bill
I saw the Motorola FM Transmitter but decided to go with my Satechi model because 1) it starts up automatically with ignition and 2) I can hide it away in the glovebox instead of having it attached to my visor.
so the best set up was to use both at the sametime but i'm not sure if i can anymore.
anyone know how to dedicate more resources to radioload or set priority in task manager?
THANKS
No.
A possibility, which depends on your Satecho thing, is if possible not to connect it to the Kaiser (leave it on, paired, but don't expressly connect to it when getting in the car).
That way there's no active BT connection between teh 2 so you shouldn't get skips. When you receive/place a phone call, the Kaiser will search for a present known handsfree and connect to it automatically anyway.
how do i pair it and not connect? when i get in the car, the car handsfree connects automatically.
j_bowl said:
I need some serious help please.
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
THANK YOU. Please help with knowledge, not speculation.
Click to expand...
Click to collapse
Did you happen to do any registry tweaks to maximize the performance of the A2DP BT Stereo performance in the past by increasing the Bitpool and MaxSupportedBitPool DWORD. I found on my Vogue that I lost simultaneous BT connection when I altered those settings from default. I now leave the registry A2DP settings at default and have not had problems with simultaneous BT connections (hands free, BT stereo and BT GPS puck).
Hello to everyone im kinda nobby in this topic but i read about sending your music through fm to ur car radio just by seetting up the same freqency on both fone and radio.. i read it in specifications of so Sh**ty nokiaD)...but anyway would that be possible in our great diamonds ?? BEst regards
yes but it require extre hardware
I have one of these
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=166893
been using it since my xda2 and it support anything
which feed it no software required
but of cause you'll need a extusb->3.5mm jack converter
I mean: did anyone try on the road?
How is the change of frequency whe you' re hearing one station? Is it really useful in motion?
Thanks a lot!
Possible?
No-one interested on it?
No-one tried it?
Hi
I've tried the radio and it works very well. I haven't used it enough on the move to know if it moves channels correctly.
Regards
Phil
I just tried the radio for the first time because I read this thread. Very good reception. Confusing Stereo/Mono button (if it says Mono then it is in Stereo and if it says Stereo then it is on Mono) ... lucky HTC don't make traffic lights.
Actually reception and sound is very very good for a phone.
The crap thing about RDS is that is does not show in any of the radio station quick buttons or in any of the presets!!!
You may like station "XDA FM" but once saved it will appear as 104.67 and you will have to memorize 104.6 as well as your other 19 presets with 3 or 4 digit frequency codes. You can not even re-name stations from a number to something meaningful! In short the radio player is not as well set out as it could be.
If you delete a scanned station then the station slot remains blank. If this is one of the first 6 stations then a blank station shows on the screen and you can't replace it. This interface is a shocker.
Hi there,
I've just seen something interesting in a friend's car: the used a gadget pluged in to the phone, which was able to send frequencies to the car-radio (when the car radio was set to a certain frequency) and you could listen the music of the phone without any adapter or so!
So my question now, is the GalaxyS maybe also able to send frequencies (not far, 2 meteres would be just fine) with a certain software to the radio? And if not, is it theoretically possible and has just not yet been programmed?
Thx in Advance for your answers
an FM transmitter can be pluged into the 1/8 jack. Most likely the way your friend is doing it.
You can find a bunch here:
http://www.amazon.ca/b?ie=UTF8&node=1243513011
Hi guys I have a android SWM 8802 with Android YT9216B_00002_V004_20190708 is android 8.1go and MCU is HW88227L-3.3SW0-3.1
This radio have key1 and I connect in my car all perfect like other guys with the same car do but my radio dont have the app where you configurate steering buttons. Normally it configurate in Car settings but when I push it the radio say that I dont have original equipment.
There are any app that I can download to do it? or maybe I need change Can protocol in factory settings but dont know what I need to set.
Another problem is that sometimes the radio start with volume to high (and not like last time) is too high i guess because my car have amplifier but I would like to know where I can adjust that
thank you so much!